Studio Monitors

Elevate your studio experience with pro-grade audio.

Showing 1–16 of 70 results

  • 0 out of 5

    Adam Audio A44H Powered Studio Monitor

    88,999.00

    Low-profile Design and Superior Performance Capabilities

    Adam Audio’s A44H takes design cues from the A Series A7V and packages them into a low-profile horizontally-oriented studio monitor. This 3-way powered monitor comes loaded with two 4-inch, long-throw woofers with plenty of punch and clarity to spare. Users will enjoy crisp, dynamic high-end, courtesy of the upgraded X-ART accelerated-ribbon tweeter. Another approved feature is the onboard DSP-based tuning system that tailors the monitor’s response to the characteristics of your control room. The A44H’s cabinet measures 19 inches in width, allowing it to be used on a standard rack shelf or be mounted above or below a display. With its extended frequency response, wide dynamic range, and broad sweet spot, A44H is an outstanding candidate for stereo setups and immersive systems alike!

    Dual long-throw woofers

    The A44H studio monitor comes loaded with a pair of 4-inch MLM low-frequency drivers. These long-throw woofers are designed to deliver a tight and coherent sound throughout the monitor’s broad sweet spot. This makes the A44H a great candidate as a center speaker for immersive or 3D audio rigs. If you need a monitor with tight and punchy projection, you can’t go wrong with an Adam Audio A44H.

    Upgraded X-ART accelerated-ribbon tweeter

    Adam Audio changed the game with their revolutionary ribbon tweeter design. The A44H comes loaded with an upgraded X-ART accelerated-ribbon HF driver. It features refined geometry and premium materials that take its sound to the next level. When you fire up your A44H’s, you’ll enjoy an ultra-wide frequency range with greater efficiency and headroom than ever before. Once you hear it, you’ll understand what all the hype is about.

    Dial in your sound with onboard DSP-based tuning

    Every control room has a unique sonic signature that influences the sound of studio monitors. Even the placement of the monitors influences their frequency response! Luckily, Adam Audio understands this. The A44H powered studio monitor includes onboard DSP-based tuning capabilities and deep integration with Sonorworks’ SoundID Reference plug-in (sold separately) help you dial in your sound. Mixing with A44H allows you to optimize the response regardless of where you’re located!

    Adam Audio A44H Active Nearfield Studio Monitor Features:

    • 3-way powered studio monitor
    • Horizontal orientation allows for flexible mounting options
    • Dual woofer design creates an impactful sound with broad dispersion
    • X-ART tweeter unlocks clean and clear high-end
    • DSP-based tuning and Sonorworks SoundID Reference plug-in (sold separately) lets you dial in the perfect sound for your room
    • 96kHz internal sampling rate keeps your audio pristine
    • 24-bit AD converter offers accurate conversion
    • Includes balanced XLR and unbalanced RCA inputs

    Tech Specs

    • Powered:Yes
    • Power Configuration:Bi-amped
    • Quantity:Single
    • LF Driver Size:2 x 4″ Woofer
    • LF Driver Type:Multi-Layer Mineral Fiber
    • HF Driver Type:Rotatable X-ART with HPS Waveguide
    • LF Driver Power Amp:110W
    • HF Driver Power Amp:20W
    • Total Power:130W
    • Crossover Frequency:2.4kHz
    • Input Types:1 x XLR, 1 x RCA
    • Other I/O:1 x RJ45 (remote control)
    • Features:Room Correction Controls, Voicing Select
    • Software:A Control
    • Enclosure Type:Dual Front Ported
    • Enclosure Material:Vinyl Wrapped MDF
    • Height:5.37″
    • Width:17″
    • Depth:13.75″
    • Weight:21.37 lbs.
    Quick View
  • 0 out of 5

    Adam Audio A4V Powered Studio Monitor

    59,999.00

    Professional Monitoring for Smaller Studios

    The Adam Audio A4V Powered Studio Monitor is the smaller sibling to the Adam Audio’s A44H. Here, we commonly recommend this 2-way monitor to users with project studios and smaller control rooms. Adam Audio loaded the A4V with a 4-inch, long-excursion woofer and their legendary X-ART accelerated-ribbon tweeter for clear definition across the broad 54Hz-42kHz frequency response. The A4V’s vertical orientation offers the imaging characteristics you’re used to and a sweet spot tailored for nearfield monitoring. Plus, it easily fits on just about any monitor stand out there. There’s also onboard DSP-based tuning to help you get the most out of your monitor.

    Designed for tight projection

    Quality sound is essential for mixing music, movies, and podcasts. For the A4V, a 4-inch Multi-Layer Mineral (MLM) speaker cone pairs with a 1-inch voice coil for a consistent and powerful response. What’s more, the long-throw design enables solid imaging all the way to the back of the studio. If you’re looking for a monitor with a robust sound and small footprint, check out the Adam Audio A4V.

    X-ART accelerated-ribbon tweeter

    Your new A4V monitor includes Adam Audio’s vaunted X-ART tweeter. When it was introduced, the accelerated-ribbon tweeter design changed the high-frequency drive game. The folded ribbon diaphragm prevents distortion by moving air more than four times faster than the folds themselves are moving. What’s more, the driver is capable of extreme dynamics throughout the frequency range — all the way up to 42kHz! You’ll appreciate the clean, efficient headroom on every project you mix.

    DSP-based tuning lets you dial in your sound

    The minds at Adam Audio know that every studio has its own unique challenges and sonic characteristics. As such, the A4V comes equipped with onboard DSP-based tuning that teams up with the Sonorworks SoundID Reference plug-in (sold separately) to help you create mixes that translate on other sources. The DSP makes it simple and easy to tailor the sound of your monitors to fit your space’s characteristics. Wherever you mix, the A4V’s DSP-based tuning has you covered.

    Adam Audio A4V Powered Studio Monitor Features:

    • 2-way powered studio monitor designed for nearfield applications
    • 4-inch, long-excursion LF driver delivers bold, accurate projection
    • X-ART tweeter provides surgically-precise high-end
    • DSP-based tuning helps you get the most out of your monitors and your room
    • Deep integration with Sonorworks SoundID Reference plug-in (sold separately) refines your sound to the max
    • 24-bit AD converter and 96kHz internal sampling rate preserves your audio quality
    • Vertical orientation allows you to use any monitor stand
    • Includes both balanced and unbalanced inputs

    Tech Specs

    • Powered:Yes
    • Power Configuration:Bi-amped
    • Quantity:Single
    • LF Driver Size:4″ Woofer
    • LF Driver Type:Multi-Layer Mineral Fiber
    • HF Driver Type:Rotatable X-ART with HPS Waveguide
    • LF Driver Power Amp:110W
    • HF Driver Power Amp:20W
    • Total Power:130W
    • Frequency Response:58Hz-41kHz (-3dB), 52Hz-45kHz (-6dB)
    • Crossover Frequency:3.0kHz
    • Maximum Peak SPL:100dB SPL @ 1m
    • Input Types:1 x XLR, 1 x RCA
    • Other I/O:1 x RJ45 (remote control)
    • Features:Room Correction Controls, Voicing Select
    • Software:A Control
    • Enclosure Type:Dual Front Ported
    • Enclosure Material:Vinyl Wrapped MDF
    • Height:10.5″
    • Width:6.25″
    • Depth:8.62″
    • Weight:12.81 lbs.
    Quick View
  • 0 out of 5

    Adam Audio A77H Powered Studio Monitor

    172,999.00

    Advanced Midfield Monitoring

    Adam Audio really delivers the goods with the A77H. This powered 3-way midfield monitor is the cutting-edge descendant of the fan-favorite A77X. The A77H comes outfitted with a robust horizontal cabinet loaded with two 7-inch woofers, a 3.5-inch midrange driver, and an X-ART ribbon tweeter. Together, the drivers deliver rock-solid imaging with superb clarity and definition across its ultra-wide frequency range. Users will enjoy easy setup, courtesy of onboard DSP-based tuning capabilities. The Adam Audio A77H delivers an astonishingly wide frequency response, impressive clarity, and a rich, enveloping sweet spot. Grab yours today and experience the Adam Audio difference today.

    Tri-amped, 3-way design optimizes performance

    The A77H benefits from a true tri-amped power section and precisely tuned crossovers. Both of the 7-inch woofers share a 250 W amp. Meanwhile, the midrange amp supplies its driver with 70 W of power, and the tweeter has a dedicated 20 W amplifier. The 3-way design includes seamless crossovers at 400Hz and 3kHz. With an Adam Audio A77H in your rig, you’ll enjoy spot-on midfield monitoring for all occasions.

    X-ART tweeter delivers ultra-precise high-end

    All kinds of projects walk through your doors, so it makes sense to have monitors that can accurately produce that high-end “air” needed for classical and orchestra recordings or handle dense and shimmering pop arrangements. Luckily for you, the A77H comes loaded with Adam Audio’s outstanding X-ART accelerated-ribbon tweeter. The pleated diaphragm moves air four times faster than the membrane itself is moving, thereby eliminating high-end distortion at the source. You’ll notice the difference every time you sit down to mix.

    The right sound for any space

    We don’t need to tell you that monitor placement and room characteristics both have an effect on your sound. However, we are delighted to tell you that the Adam Audio A77H Powered Studio Monitor includes onboard tuning for sound optimization. With the DSP-based tuning capabilities that team up with the Sonorworks SoundID Reference plug-in (sold separately), it’s easy to dial in the sound that suits your space. That way, you can trust your monitor every time you tweak a mix.

    Adam Audio A77H 7-inch Powered Studio Monitor Features:

    • 3-way powered studio monitor for midfield monitoring
    • Tri-amped design improves efficiency
    • Horizontal orientation creates a rich soundstage and solid imaging
    • Dual 7-inch MLM woofers offer punchy, impactful low-end
    • 3.5-inch MLM midrange driver provides extra clarity
    • X-ART tweeter pumps out clear, precise high-end
    • DSP-based tuning optimizes the monitor response to fit your room
    • Works with Sonorworks SoundID Reference plug-in (sold separately) to refine your sound further
    • Rotatable HPS waveguide gives you further sonic customization
    • 24-bit AD converter and 96kHz internal sampling rate preserves audio quality
    • Includes balanced and unbalanced inputs to integrate with any setup

    Tech Specs

    • Powered:Yes
    • Power Configuration:Tri-amped
    • Quantity:Single
    • LF Driver Size:2 x 7″ Woofer
    • LF Driver Type:Multi-Layer Mineral Fiber
    • MF Driver Size:3.5″ Driver
    • MF Driver Type:Dome Cone Hybrid, Multi-Layer Mineral Fiber
    • HF Driver Type:Rotatable X-ART with HPS Waveguide
    • LF Driver Power Amp:250W
    • MF Driver Power Amp:70W
    • HF Driver Power Amp:20W
    • Total Power:340W
    • Crossover Frequency:400Hz, 3.0kHz
    • Input Types:1 x XLR, 1 x RCA
    • Other I/O:1 x RJ45 (remote control)
    • Features:Room Correction Controls, Voicing Select
    • Software:A Control
    • Enclosure Type:Dual Front Ported
    • Enclosure Material:Vinyl Wrapped MDF
    • Height:9.25″
    • Width:20.87″
    • Depth:13.75″
    • Weight:37.68 lbs.

     

    Quick View
  • 0 out of 5

    Adam Audio A7V Powered Studio Monitors

    94,999.00

    Next-gen Monitoring for Smaller Spaces

    The Adam Audio A7V is the next evolution of the award-winning A7X. This 2-way monitor is a stellar choice for project studios, smaller control rooms, and anyone who needs superior audio quality at an outstanding price. It comes with a newly-designed 7-inch woofer and Adam Audio’s game-changing X-ART ribbon tweeter. Together, the bi-amped drivers treat listeners to clean and consistent audio from 41Hz to 42kHz. Better still, this monitor is equipped with DSP-based tuning to fine-tune its response to match your room. The A7V’s vertical orientation offers the imaging characteristics you’re used to and a sweet spot tailored for nearfield monitoring. Get yours now from us and experience them for yourself!

    X-ART ribbon tweeter for a lush high-end

    The A7V includes Adam Audio’s well-loved X-ART ribbon tweeter. The X-ART tweeter uses an accelerated-ribbon design to eliminate the high-end distortion that plagues common dome-style tweeters. Here’s how it works. The X-ART consists of a precisely folded ribbon diaphragm. When in use, the diaphragm moves air approximately four times faster than the folds are moving. You’ll experience no high-end distortion even at extreme dynamics — all the way to 42kHz. For clean, efficient headroom is what you’re after, you’ll want an Adam Audio A7V.

    A woofer with serious punching power

    With the A7V, you’ll be ready for any project that walks through your studio. This powered 2-way monitor comes equipped with a 7-inch Multi-Layer Mineral (MLM) woofer. The cone pairs with a 1.3-inch voice coil and 110W amplifier to deliver more than enough low and midrange power for any situation. Power isn’t everything, though! The woofer also exhibits serious midrange clarity and a broad sweet spot that’s perfect for nearfield monitoring. If you’re looking for a powerful sound in a small package, you’ve found it in the Adam Audio A7V.

    Achieve the right sound in any space

    You’re serious about your sound. So why would you risk making the wrong mixing decision when switching monitors? With Adam Audio’s A7V, you’ll always know you made the right call. This nearfield studio monitor had DSP-based acoustic tuning baked right in, so you can tailor the sound of your speakers to your space. What’s more, this speaker has deep integration with Sonorworks’ SoundID Reference plug-in (sold separately) to shape your sound perfectly. It’s not a complicated process either! Adam Audio makes it so easy that you can get set up and running in mere minutes!

    Adam Audio A7V 7-inch Powered Studio Monitor Features:

    • 2-way powered studio monitoring optimized for nearfield applications
    • X-ART ribbon tweeter achieves ultra-accurate highs with no distortion at high SPLs
    • 7-inch woofer creates an expansive sweet spot
    • DSP-based tuning helps you tune the monitor to any space
    • Native integration with Sonorworks SoundID Reference plug-in (sold separately)
    • 96kHz sampling rate and 24-bit A/D converter keep audio pristine
    • Rotatable HPS waveguide gives you further sonic customization
    • Vertical cabinet easily fits on most any monitor stand
    • Balanced and unbalanced inputs allow for integration with any monitoring setup

    Tech Specs

    • Powered:Yes
    • Power Configuration:Bi-amped
    • Quantity:Single
    • LF Driver Size:7″ Woofer
    • LF Driver Type:Multi-Layer Mineral Fiber
    • HF Driver Type:Rotatable X-ART with HPS Waveguide
    • LF Driver Power Amp:110W
    • HF Driver Power Amp:20W
    • Total Power:130W
    • Frequency Response:44Hz-41kHz (-3dB), 40Hz-45kHz (-6dB)
    • Crossover Frequency:2.8kHz
    • Maximum Peak SPL:105dB SPL @ 1m
    • Input Types:1 x XLR, 1 x RCA
    • Other I/O:1 x RJ45 (remote control)
    • Features:Room Correction Controls, Voicing Select
    • Software:A Control
    • Enclosure Type:Dual Front Ported
    • Enclosure Material:Vinyl Wrapped MDF
    • Height:13.25″
    • Width:7.87″
    • Depth:11″
    • Weight:19.18 lbs.
    Quick View
  • 0 out of 5

    Adam Audio T8V Powered Studio Monitor

    34,999.00

    Professional ADAM Monitoring for the Budget-conscious Studio

    Flagship of the T Series, ADAM Audio’s affordable line of professional 2-way active studio monitors, the T8V features an 8″ polypropylene low-frequency driver that delivers bass extension down to an impressive 39Hz, while the company’s U-ART accelerated-ribbon tweeter provides pristine highs extended up to 25kHz — quite remarkable for a monitor in this price range. The tweeter’s broad, uniform dispersion pattern is assisted by a precision waveguide modeled on the High Frequency Propagation (HPS) waveguide used in ADAM’s premium S Series studio monitors, which provides an impressively wide sweet spot that liberates you from being constrained to a rigid listening position.

    The T8V’s beveled cabinet features a rear-firing bass reflex port affixed to a thick metal backplate that houses the analog input connections and DSP-controlled driver crossovers and equalization. The woofer’s 70W Class D amplifier, in combination with the 20W Class D tweeter amp, enables a pair of T8Vs to achieve an impressive maximum SPL of 118dB at one meter. The T8V’s extended frequency response, robust dynamic range, exemplary transient response, broad sweet spot, and compact footprint make it ideally suited for use in small control rooms for music production, video post, and broadcast applications. It’s a perfect monitoring solution, considering the modest budgets that many facilities have to work with.

    Quick View
  • 0 out of 5

    Behringer MS16 Active Personal Monitor Speakers

    13,799.00

    Multimedia Monitors That Won’t Break the Bank

    The Behringer MS16 is a compact 2-way stereo speaker system for home studio or multimedia applications. Eight watts drive the MS16’s 4″ woofer and high-resolution tweeter, while a front-mounted volume control and individual bass and treble controls make accurate sound adjustments a breeze. Two stereo line inputs (RCA and 1/8 TRS) allow simultaneous use of two stereo sources, so you can play back CDs, MDs or MP3s and use an electric guitar/keyboard at the same time. In addition, the TRS microphone input lets you mix vocals with a stereo track. Magnetic shielding and compact size make the Behringer MS16 ideal for placement near video monitors or computer displays.

    Behringer MS16 2-Way Powered Monitors (pair) Features at a Glance:

    • 4″ woofers and high-resolution tweeters
    • Each speaker is driven by an 8W amplifier
    • Dedicated volume, bass and treble controls for more flexibility
    • Stereo RCA inputs; 1/8″ TRS stereo input
    • Separately adjustable 1/4″ TRS microphone input mixable with stereo inputs
    • 1/8″ TRS headphone connector with auto-mute loudspeaker function
    • Magnetically shielded for placement near computer monitors

    Complete your setup with Behringer MS16 multimedia monitors!

    Tech Specs

    • Powered:Yes
    • Power Configuration:Single Amp
    • Quantity:Pair
    • LF Driver Size:4″
    • HF Driver Size:1.5″
    • Total Power:8W
    • Frequency Range:80Hz-20kHz
    Quick View
  • 0 out of 5

    Behringer Studio 50USB Powered Studio Monitors

    19,799.00

    Value-packed Bi-amped Studio Monitors

    We know your studio monitors are the windows into your music. The clearer the “glass,” the more you hear. For maximum clarity, Behringer’s Studio 50USB Monitor Speakers are bi-amped with 150 watts, with the long-throw, Kevlar-cone 5″ woofer and a 1″ silk dome tweeter each driven by its own amplifier. A pair of 50USB monitors gives you a broad sweet spot and room-filling sound, thanks to Behringer’s advanced waveguide technology. These monitors feature XLR and TRS inputs, plus a USB input that lets you directly connect with digital audio sources. And they’re magnetically shielded for placement near CRT monitors. Equip your studio with value-packed Behringer Studio 50USB Monitor Speakers, and hear what you’ve been missing.

    Behringer Studio 50USB Monitor Speakers Features at a Glance:

    • Ultra-linear 2-way digital monitor speakers ideally suited for studios and multimedia workstations
    • True bi-amping mode with 4 amplifiers for ultimate sound resolution
    • 150 Watt of digital power amplification
    • Ultra-high resolution 1″ silk dome tweeter for ultimate sound reproduction
    • Long-throw 5″ woofers with deformation-resistant Kevlar cone for ultimate bass response
    • Ultimate dispersion characteristics and extremely large “sweet spot” owing to advanced waveguide technology
    • Adjustable volume control and tweeter sensitivity to adapt to a wide range of acoustic conditions
    • USB input for direct connection of your digital audio sources
    • Two analog inputs featuring XLR and TRS connectors can be used simultaneously with a digital stereo source
    • Magnetically shielded for placement near computer monitors
    • High-quality components and exceptionally rugged construction ensure long life

    Hear what you’ve been missing, with Behringer’s Studio 50USB Monitor Speakers!

    Tech Specs

    • Powered:Yes
    • Power Configuration:Bi-amped
    • LF Driver Size:5″
    • HF Driver Size:1″
    • Total Power:150W
    • Input Types:2 x XLR, 2 x 1/4″
    • USB:1 x Type B
    • Enclosure Type:Ported
    • Height:10 in.
    • Width:8 in.
    • Depth:7 in.
    • Weight:14.3 lbs.
    Quick View
  • 0 out of 5

    Genelec 8330A Powered Studio Monitors

    Genelec Clarity with Smart Active Monitor Technology

    Genelec 8330A bi-amplified studio monitors are built for demanding professional applications, providing you with a compact footprint, a sophisticated enclosure design, and outstanding acoustic performance. Here , we’re duly impressed by Genelec’s Smart Active Monitor (SAM) technology, which allows these studio monitors to optimize themselves and automatically align their level, timing, and equalization of room response anomalies, ensuring that you hear the original nuances of your source, without leaving anything out or adding anything to your signal. On top of that, these monitors deliver surprisingly deep bass, built-in decoupling, ISS power management, and more. Whether you work in a recording studio, post-production house, digital edit suite, radio, or television, you can’t go wrong with a set of Genelec 8330A bi-amplified studio monitors!

    Genelec 8330A Bi-amplified Studio Monitor at a Glance:

    • Smart Active Monitor (SAM) provides remarkably accurate monitoring
    • Minimum Diffraction Enclosure (MDE) delivers focused nearfield sound
    • Directivity Control Waveguide (DCW) enhances dimensional imaging
    • High-performance reflex port design delivers extended lows
    • High audio output plus low distortion equals killer clarity
    • Versatile mounting options plus special Iso-Pod stand
    • Protected by Genelec’s Intelligent Signal Sensing (ISS) power management system

    Smart Active Monitor (SAM) provides remarkably accurate monitoring

    These days, it’s not unusual for an engineer to work in a small, less-than-perfect acoustical environment. Genelec’s Smart Active Monitor (SAM) technology takes this into account by allowing the 8330A studio monitor to automatically calibrate its level, timing, and equalization to your room, ensuring that you hear the original nuances of your source accurately, without color or distortion. By using the highly-intuitive Genelec Loudspeaker Manager (GLM) software, you can control an entire network of 8330As, giving you a highly-flexible computer-controlled system of monitors and subwoofers.

    Minimum Diffraction Enclosure (MDE) delivers focused nearfield sound

    The 8330A studio monitor features Genelec’s Minimum Diffraction Enclosure (MDE) with rounded edges and a gently curved front and sides. This allows the 8330A to achieve a very smooth frequency response and superb imaging qualities with minimized cabinet edge diffraction.

    Directivity Control Waveguide (DCW) enhances dimensional imaging

    The 8330A studio monitor also features the advanced Genelec Directivity Control Waveguide (DCW). The revolutionary DCW has been further enhanced to provide extremely accurate control of the 8330A’s directivity. Genelec designed this specially-shaped and very smooth surface and integrated it with the enclosure. Its area has been maximized to achieve an astoundingly flat on- and off-axis frequency response. The 8330A has a wide and consistent listening window, with minimal harmful early room reflections and other colorations associated with conventional designs.

    High-performance reflex port design delivers extended lows

    To increase the low frequency extension and SPL capacity of the 8330A studio monitor’s woofer, Genelec designed an ingenious flow-optimized reflex port. The long, curved tube maximizes airflow so the 8330A can reproduce deep bass without compression. The tube terminates with a wide flare, minimizing port noise and providing excellent bass articulation. An optimized die-cast aluminum structure with extremely durable semi-matte finish and acoustically optimized metal grilles add to the 8330A’s acoustic excellence.

    High audio output plus low distortion equals killer clarity

    Genelec’s low distortion drivers – 5″ bass speakers and 3/4″ metal dome tweeters – are driven by the 8330A studio monitor’s dedicated 50-watt bass and treble amplifiers after sophisticated filtering. Magnetic shielding, overload protection circuitry, and versatile room response controls are standard.

    Versatile mounting options plus special Iso-Pod stand

    The versatile mounting features on the 8330A studio monitor include integrated rear support points for wall and floor stands plus a further 3/8″ thread for mounting on the cabinet base. In addition, every Genelec 8330A monitor comes with an Iso-Pod (Isolation Positioner/Decoupler) as standard. The Iso-Pod enables the acoustic axis of the monitor to be aimed at the listener, while acoustically and mechanically decoupling the monitor from the surface it is resting on.

    Protected by Genelec’s Intelligent Signal Sensing (ISS) power management system

    Thanks to Genelec’s Intelligent Signal Sensing (ISS) power management system, you never have to remember to shut down your 8330A studio monitors again. ISS constantly checks for input signal. After a while, if ISS doesn’t detect anything, it switches your 8330A over to a low-power sleep state, safeguarding your gear and sparing you the wasted electricity.

    Genelec 8330A Bi-amplified Studio Monitor Features:

    • Compact, versatile nearfield monitor for project studios, workstations, and surround suites
    • Smart Active Monitor (SAM) provides remarkably accurate monitoring
    • Special low-distortion 5″ woofer and 3/4″ metal dome tweeter deliver fantastic clarity
    • Separate 50W bass and treble amplifiers ensure consistent power distribution
    • Minimum Diffraction Enclosure (MDE) delivers focused nearfield sound
    • Directivity Control Waveguide (DCW) enhances dimensional imaging
    • High-performance reflex port design delivers extended lows
    • High audio output plus low distortion equals killer clarity
    • Versatile mounting options includes special Iso-Pod stand
    • Protected by Genelec’s Intelligent Signal Sensing (ISS) power management system

    The Genelec 8330A is a compact, powerful, and efficient bi-amplified studio monitor!

    Tech Specs

    • Powered:Yes
    • Power Configuration:Bi-amped
    • Quantity:Single
    • LF Driver Size:5″
    • LF Driver Type:Cone
    • HF Driver Size:0.75″
    • HF Driver Type:Dome
    • LF Driver Power Amp:50W
    • HF Driver Power Amp:50W
    • Total Power:100W
    • Frequency Response:58Hz-20kHz (±1.5dB)
    • Crossover Frequency:2.9kHz
    • Maximum Peak SPL:110 dB SPL @ 1m
    • Input Types:1 x XLR, 1 x XLR (AES/EBU)
    • Output Types:1 x XLR (AES/EBU)
    • Enclosure Type:Ported
    • Height:11.81″ (with Iso-Pod stand); 11.25″ (without Iso-Pod stand)
    • Width:7.44″
    • Depth:7″
    • Weight:12.1 lbs.

     

    Quick View
  • 0 out of 5

    JBL 308P MKII (Pair) Powered Studio Monitors

    30,999.00

    Accurate Midfield Monitoring for Every Studio

    JBL 308P MkII active studio monitors are a great near- and midfield solution for any serious audio engineer or music producer. They’re great for mixing music in your DAW software, editing video, or any other task that requires monitoring accuracy. JBL designed the 308P MkII with advanced features acquired from their 7 Series and M2 Master Reference Monitor, making legendary JBL performance accessible to every studio. JBL’s innovative Image Control Waveguide works in concert with refined transducers to deliver a well-defined and incredibly dimensional stereo image. Ask anyone: from surprisingly rich lows to smooth highs, you’ll find it easy to produce great-sounding recordings with JBL 308P MkII studio monitors.

    Incredible stereo imaging thanks to an innovative waveguide

    When you can clearly hear everything in your mix, you make accurate sonic judgments — which leads to better-sounding recordings. To that end, JBL applied innovative elements from their 7 Series and M2 Master Reference Monitors to give the 308P MkII truly impressive sound reproduction capabilities. The Image Control Waveguide design is one such feature, and it helps the 308P MkII present a deep, detailed soundstage and a wide, room-friendly sweet spot.

    Wide sweet spot equals a better studio experience

    We’re engineers, musicians, and producers, too — we know you don’t spend every second of your studio time in the ideal mixing position. JBL 308P MkII monitors have a broad sweet spot, which means there’s less variation in what you hear when you’re not in the perfect position. Especially if you have clients in the room, you want consistent sound throughout your studio, and you’ll like what you hear from the 308P MkII.

    Ported design for greater accuracy at low volume levels

    Checking your mix at low volume levels is a great way to confirm your overall balances, but many monitors will suffer in the bass regions when monitoring at low levels. The JBL 308P MkII uses JBL’s patented Slip Stream low-frequency port for accurate bass response at low playback levels. The double-flared port shape also reduces the turbulence some ported designs suffer from, meaning that bass response remains pure when you turn the 308P MkII back up.

    JBL 308P MkII Powered Studio Monitor Features:

    • Next-generation JBL transducers for optimized transient response and enhanced linearity
    • Boundary EQ settings compensate for environmentally induced low-frequency anomalies
    • Patented Image Control Waveguide for detailed imaging and a wide, room-friendly sweet spot
    • Patented Slip Stream low-frequency port for superior bass performance at all playback levels
    • Integrated custom Class D amplifiers deliver 112 watts (LF: 56W; HF: 56W) of power for high output and dynamic range
    • Frequency response (±3dB): 45Hz–20kHz
    • HF Trim switch adjusts high-frequency output to accommodate room acoustics or personal preferences
    • Flexible connectivity with balanced XLR and 1/4″ TRS inputs, +4dBu/–10dBV input-sensitivity switch, and volume control
    • Engineered to JBL Linear Spatial Reference design criteria for outstanding accuracy in any acoustical environment
    • Strenuous JBL 100-hour power test ensures years of reliability
    • Shielded for safe placement near magnetically sensitive equipment
    • Sleek, modern design provides a dramatic flair to any studio
    • Compact footprint accommodates a variety of studio space
    Quick View
  • 0 out of 5

    KRK Classic 5 (pair) Powered Studio Monitors

    29,599.00

    Affordable Flat-frequency Studio Monitors

    When you look at the past three decades of KRK monitor development, it’s clear to see that they’re absolutely devoted to providing high-quality studio monitoring without the high price tag. These Classic 5 reference speakers are some of the most value-packed options.They borrow heavily from the award-winning, industry-leading Rokit series, including their Class A/B amplifiers, built-in limiters, and custom 5″ glass aramid composite woofers. However, Classic 5s are intended for more critical mixing applications than Rokits, making these nearfield monitors a great choice for editing suites and small studios.

    Ideal for critical listening

    There are many going theories about mixing. The prevailing one these days is to mix on speakers with as close to flat frequency responses possible. When your monitors are flat, you can mix free from the character hi-fi stereo systems use to enhance music. That makes it a lot easier to craft mixes that will translate (sound the same) from one set of consumer speakers to another. While KRK Rokit series speakers are a bit more flattering, Classic 5s are flat and critical, making them complements each other perfectly. And at this price, outfitting your studio with a second pair of monitors for A/B comparison is easily within reach.

    Easily tuned to your room

    In true KRK style, Classic 5 studio monitors are incredibly easy to tune to your room. They include two frequency controls that let you fine tune the high and low frequency ranges. For instance, if you’re in a space that forces you to keep your Classic 5s near a wall or corner, you can cut some of those lows. Or, if you’re in an overly reflective space cutting some of the highs by a decibel may be just what you need.

    Bulletproof design

    When you breakdown the Classic 5, it’s hard to imagine how KRK justifies making them so affordable. For starters, there are the speakers themselves. The woofer is made from layered glass aramid fibers — literally bulletproof material that keeps its shape while remaining light. This results in ultra low distortion and clear frequency expression. Likewise, the front ported design keeps your low end tight and honest. Top it off with a fantastic Class A/B amp, smooth soft-dome tweeter, and professional connections including both unbalanced RCA and balanced TRS and XLR, and Classic 5 studio monitors go well above and beyond their class

    KRK Classic 5 Studio Monitors Features:

    • Nearfield studio monitors that are perfect for mixing and critical listening
    • Flat frequency response is idea for critical listening, mixing, and editing
    • Layered 5″ glass aramid fiber low-frequency driver and soft dome tweeter provide smooth sound with minimal distortion
    • Class A/B amplifier with integrated limiter delivers consistent sound that won’t overload
    • Front-slotted bass port and frequency controls reduce boundary coupling and accommodate for less-than-idea acoustics
    • Professional connectivity accommodate all kinds of systems

    Tech Specs

    • Powered:Yes
    • Power Configuration:Single Amp
    • LF Driver Size:5″ Woofer
    • LF Driver Type:Glass Aramid Fiber
    • HF Driver Size:1″ Tweeter
    • HF Driver Type:Soft Dome
    • Total Power:50W Class A-B
    • Frequency Response:46Hz-34.5kHz
    • Maximum Peak SPL:101 dB SPL @ 1m
    • Input Types:1 x XLR, 1 x RCA, 1 x 1/4″
    • Enclosure Type:Front Ported
    • Height:11.2″
    • Width:7.4″
    • Depth:9.68″
    • Weight:12.95 lbs.
    • Manufacturer Part Number:CL5G3-NA
    Quick View
  • 0 out of 5

    KRK Classic 7 Powered Studio Monitor

    22,299.00

    Classic KRK Sound with Enhanced Mixing Capability

    The Classic 7 Powered Studio Monitor effortlessly delivers the renowned sonic accuracy and performance that has come to be synonymous with KRK. This is due in part to taking a page out of the book of the company’s successful ROKIT line: the Classic 7 defaults to a flat frequency that invites more critical listening, which in turn makes your mixes more accurate. You also benefit from the +2 dB KRK Bass Boost, enhancing the the response of the lower end of your mix with clear, convincing results. The Classic 7 is an active monitor boasting a 7-inch glass woofer and 1-inch soft dome tweeter that combine for an impressive 73 watts of power. It features universal connectivity with XLR, 1/4 inch TRS, and RCA inputs — making it compatible with just about any audio interface or mixer you want to pair with it. Producers here are big fans of the system-optimized auto limiter, which drastically reduces sporadic peaks and protects both the speaker and overall sound.

    Dual threat with connectivity and clarity

    Whether you’re mixing a precise sound setup, or looking for accurate playback while producing, the Classic 7 is sure to deliver top-shelf results. Run mic cables with the XLR input, link your TRS cable for a larger stereo sound, and use the RCA as your phono connector. Additionally, the built in-volume control, auto limiter, and bass boost allow you to fine-tune your sound with crisp accuracy every time. Plus, foam isolation pads underneath the Classic 7 do more than just protect the surface your monitor sits on; they also improve clarity and overall sonic delivery.

    KRK Classic 7 Powered Studio Monitor Features:

    • 7-inch woofer and 1-inch tweeter for impressive volume and presence through 73W of power
    • Facilitates improved critical listening through ROKIT-inspired flat frequency default
    • Included +2 dB KRK Bass Boost to emphasize low-end frequencies
    • Smart companion for mixers and audio interfaces in the studio
    • Great connectivity options through XLR, TRS, and RCA inputs
    • Built-in auto limiter to reduce harmful and unwanted peaking
    • Foam isolation pads for surface protection and improved clarity

    Tech Specs

    • Powered:Yes
    • Power Configuration:Bi-amped
    • LF Driver Size:7″ Woofer
    • LF Driver Type:Glass Aramid
    • HF Driver Size:1″ Tweeter
    • HF Driver Type:Soft Dome
    • LF Driver Power Amp:48W
    • HF Driver Power Amp:25W
    • Total Power:73W Class AB
    • Frequency Range:37Hz-40kHz
    • Frequency Response:47.5Hz-34.5kHz
    • Crossover Frequency:2.3kHz
    • Maximum Peak SPL:101 dB
    • Input Types:1 x XLR, 1 x 1/4″ TRS, 1 x RCA
    • Features:High/Low Frequency Boost/Cut
    • Enclosure Type:Front Ported
    • Enclosure Material:MDF with Black Vinyl wrap
    • Height:11.40″
    • Width:8.90″
    • Depth:13.07″
    • Weight:18.5 lbs.
    • Manufacturer Part Number:CL7G3-NA
    Quick View
  • 0 out of 5

    KRK Classic 8 Powered Studio Monitor

    27,899.00

    Classic KRK Sound with Enhanced Mixing Capability

    The Classic 8 Powered Studio Monitor effortlessly delivers the renowned sonic accuracy and performance that has come to be synonymous with KRK. This is due in part to taking a page out of the book of the company’s successful ROKIT line: the Classic 8 defaults to a flat frequency that invites more critical listening, which in turn makes your mixes more accurate. You also benefit from the +2 dB KRK Bass Boost, enhancing the the response of the lower end of your mix with clear, convincing results. The Classic 8 is an active monitor boasting an 8-inch glass woofer and 1-inch soft dome tweeter that combine for an impressive 100 watts of power. It features universal connectivity with XLR, 1/4 inch TRS, and RCA inputs — making it compatible with just about any audio interface or mixer you want to pair with it. Studio producers are big fans of the system-optimized auto limiter, which drastically reduces sporadic peaks and protects both the speaker and overall sound.

    Dual threat with connectivity and clarity

    Whether you’re mixing a precise sound setup, or looking for accurate playback while producing, the Classic 8 is sure to deliver top-shelf results. Run mic cables with the XLR input, link your TRS cable for a larger stereo sound, and use the RCA as your phono connector. Additionally, the built in-volume control, auto limiter, and bass boost allow you to fine-tune your sound with crisp accuracy every time. Plus, foam isolation pads underneath the Classic 8 do more than just protect the surface your monitor sits on; they also improve clarity and overall sonic delivery.

    KRK Classic 8 Powered Studio Monitor Features:

    • 8-inch woofer and 1-inch tweeter for impressive volume and presence through 100W of power
    • Facilitates improved critical listening through ROKIT-inspired flat frequency default
    • Included +2 dB KRK Bass Boost to emphasize low-end frequencies
    • Smart companion for mixers and audio interfaces in the studio
    • Great connectivity options through XLR, TRS, and RCA inputs
    • Built-in auto limiter to reduce harmful and unwanted peaking
    • Foam isolation pads for surface protection and improved clarity

    Tech Specs

    • Powered:Yes
    • Power Configuration:Bi-amped
    • LF Driver Size:8″ Woofer
    • LF Driver Type:Glass Aramid
    • HF Driver Size:1″ Tweeter
    • HF Driver Type:Soft Dome
    • LF Driver Power Amp:75W
    • HF Driver Power Amp:25W
    • Total Power:100W Class AB
    • Frequency Range:35Hz-35kHz
    • Frequency Response:42.5Hz-28kHz
    • Crossover Frequency:2.0kHz
    • Maximum Peak SPL:106 dB
    • Input Types:1 x XLR, 1 x 1/4″ TRS, 1 x RCA
    • Features:High/Low Frequency Boost/Cut
    • Enclosure Type:Front Ported
    • Enclosure Material:MDF with Black Vinyl wrap
    • Height:12.40″
    • Width:10.82″
    • Depth:15.60″
    • Weight:24.6 lbs.
    • Manufacturer Part Number:CL8G3-NA
    Quick View
  • 0 out of 5

    KRK GOAUX3 Powered Studio Monitors

    Portable Power Unleashed

    When it comes to portable studio-grade monitors with unbeatable performance, KRK’s GOAUX system delivers on all counts. This GOAUX3 monitor system comes with a pair of 3-inch portable monitors. A 2-way system provides excellent bass and treble definition with up to 98dB SPL that’s perfect for most studio needs. The GOAUX3 system offers ample ways to connect with RCA, 3.5mm TRS, and Bluetooth options for playing source audio. What’s more, it all comes packaged in a padded travel bag with isolation stands and kickstart cabling, so you’re ready to get started right out of the box. Don’t delay, grab yours from us today!

    KRK GOAUX3 3-inch Powered Portable Studio Monitor Pair Features:

    • Powered monitor pair with 3-inch speakers
    • 2-way monitoring design provides quality audio response across frequencies
    • 98dB SPL with bi-amped Class D power
    • RCA, 3.5mm TRS, and Bluetooth input options
    • Includes padded travel bag, isolation stands, and cabling

    Tech Specs

    • Powered:Yes
    • Power Configuration:Bi-amped
    • Quantity:Pair
    • LF Driver Size:3″ Woofer
    • LF Driver Type:Woven Glass Aramid
    • HF Driver Size:1″ Tweeter
    • HF Driver Type:Soft Textile Dome
    • LF Driver Power Amp:22W
    • HF Driver Power Amp:8W
    • Total Power:60W (30W per side)
    • Frequency Range:60Hz-22kHz (-10dB)
    • Frequency Response:65Hz-20kHz (-3dB)
    • Crossover Frequency:2.5kHz
    • Maximum Peak SPL:105dB SPL
    • Input Types:1 x Dual RCA Stereo, 1 x 1/8 TRS”
    • Output Types:1 x 1/8″ (headphones)
    • Bluetooth:Yes
    • Enclosure Type:Rear Ported
    • Enclosure Material:ABS
    • Height:6.8″
    • Width:4.37″
    • Depth:4.72″
    • Weight:6.94 lbs. (Including both speakers, stands, carrying bag, included accessories)
    • Manufacturer Part Number:GOAUX3-NA
    Quick View
  • 0 out of 5

    KRK GOAUX4 Powered Studio Monitors

    Portable Power Unleashed

    When it comes to portable studio-grade monitors with unbeatable performance, KRK’s GOAUX system delivers on all counts. This GOAUX4 monitor system comes with a pair of 4-inch portable monitors. A 2-way system provides excellent bass and treble definition with up to 100dB SPL that’s perfect for most studio needs. The GOAUX4 system offers ample ways to connect with RCA, 3.5mm TRS, and Bluetooth options for playing source audio. What’s more, it features a handy 1-button automatic room correction tool and measurement mic, plus a padded travel bag with isolation stands and kickstart cabling — it’s everything you need for perfect sound right out of the box. Don’t delay, grab yours from us today!

    KRK GOAUX4 4-inch Powered Portable Studio Monitor Pair Features:

    • Powered monitor pair with 4-inch speakers
    • 2-way monitoring design provides quality audio response across frequencies
    • 100dB SPL with bi-amped Class D power
    • Automatic room correction (1-button tool, measurement mic included)
    • RCA, 3.5mm TRS, and Bluetooth input options
    • Includes padded travel bag, isolation stands, and cabling

    Tech Specs

    • Powered:Yes
    • Power Configuration:Bi-amped
    • Quantity:Pair
    • LF Driver Size:4″ Woofer
    • LF Driver Type:Woven Glass Aramid
    • HF Driver Size:1″ Tweeter
    • HF Driver Type:Soft Textile Dome
    • LF Driver Power Amp:33W
    • HF Driver Power Amp:17W
    • Total Power:100W (50W per side)
    • Frequency Range:55Hz-22kHz (-10dB)
    • Frequency Response:60Hz-20kHz (-3dB)
    • Crossover Frequency:2.5kHz
    • Maximum Peak SPL:108dB SPL
    • Input Types:1 x Dual RCA Stereo, 1 x 1/8″ TRS, 2 x 1/4″ TRS
    • Output Types:1 x 1/8″ (headphones)
    • USB:1 x Type B
    • Bluetooth:Yes
    • Enclosure Type:Rear Ported
    • Enclosure Material:ABS
    • Height:8.07″
    • Width:5.35″
    • Depth:5.51″
    • Weight:9.48 lbs (Including both speakers, stands, carrying bag, included accessories)
    • Manufacturer Part Number:GOAUX4-NA
    Quick View
  • 0 out of 5

    KRK S10.4 Powered Studio Subwoofer

    49,499.00

    Big, Booming Bass for Any Studio Setup

    KRK’s S10.4 10-inch Powered Studio Subwoofer makes it easier than ever to incorporate a subwoofer into your studio setup. Its extensive I/O allows for XLR, 1/4-inch TRS, and RCA connections, with an optional footswitch jack for hands-free operation of bypass and crossover filter features. When it’s time to fire up the S10.4, you’ll experience an incredibly tight and punchy low end delivered through a single 10-inch glass aramid composite woofer and a front-firing bass port. Its Class D amplifier pumps out the clean and clear sound discerning audiophiles constantly crave, with everything tucked neatly inside a low-profile cabinet that fits comfortably into any layout. Add the KRK S10.4 10-inch Powered Studio Subwoofer to your arsenal for big, booming bass you can rely on.

    Bells and whistles for any situation

    Not only does the S10.4 deliver rich, dynamic low end in any studio setup, but KRK also equipped it with a handy set of panel controls to fine-tune its sound to a variety of situations. An exceptionally powerful crossover filter tailors the S10.4 to whatever monitors you’re currently using, with options for 60, 70, 80, and 90Hz operation. You also get toggles for input sensitivity, polarity reverse, stand-by, and a ground lift for removing unwanted noise, facilitating even deeper tone tweaking at the flick of a switch. Not to mention, the S10.4’s footswitch jack is great for hands-free operation, allowing you to enable or disable the sub as well as the crossover filter (footswitch sold separately). All in all, the S10.4’s extensive feature set makes it the perfect companion for whatever setup you’re running.

    KRK S10.4 10-inch Powered Studio Subwoofer Features:

    • High-powered studio subwoofer that complements any set of studio monitors
    • 10-inch glass aramid composite woofer handles high SPLs without distortion
    • Extensive I/O with XLR, TRS, and RCA options
    • Front-firing bass port and Class D amplifier
    • Low-profile cabinet fits comfortably into setups of all kinds
    • 60–90Hz selectable crossover filter customizes sub response
    • Sensitivity switch for use with pro or consumer audio equipment
    • Ground lift and polarity switch overcome setup issues
    • Footswitchable bypass (footswitch sold separately)
    • Frequency response: 30Hz–110Hz

    Tech Specs

    • Powered:Yes
    • Speaker Size:10″
    • Driver Type:Glass Aramid Composite
    • Total Power :160W Class D
    • Frequency Range:27Hz-156Hz (-10dB)
    • Maximum Peak SPL:117 dB SPL @ 1m
    • Input Types:2 x XLR, 2 x 1/4″, 1 x Dual RCA Stereo
    • Output Types:2 x XLR, 2 x 1/4″, 1 x Dual RCA Stereo
    • Other I/O:1 x 1/4″ (footswitch)
    • Enclosure Type:Front Ported
    • Enclosure Material:15mm Reinforced MDF with Black Vinyl wrap
    • Height:15″
    • Width:14″
    • Depth:16.06″
    • Weight:34.5 lbs.
    Quick View
  • 0 out of 5

    KRK S12.4 Powered Studio Subwoofer

    86,499.00

    Big, Booming Bass for Any Studio Setup

    KRK’s S12.4 12-inch Powered Studio Subwoofer makes it easier than ever to incorporate a subwoofer into your studio setup. Its extensive I/O allows for XLR, 1/4-inch TRS, and RCA connections, with an optional footswitch jack for hands-free operation of bypass and crossover filter features. When it’s time to fire up the S12.4, you’ll experience an incredibly tight and punchy low end delivered through a single 12-inch Kevlar aramid composite woofer and a front-firing bass port. Its Class D amplifier pumps out the clean and clear sound discerning audiophiles constantly crave, with everything tucked neatly inside a low-profile cabinet that fits comfortably into any layout. Add the KRK S12.4 12-inch Powered Studio Subwoofer to your arsenal for big, booming bass you can rely on.

    Bells and whistles for any situation

    Not only does the S12.4 deliver rich, dynamic low end in any studio setup, but KRK also equipped it with a handy set of panel controls to fine-tune its sound to a variety of situations. An exceptionally powerful crossover filter tailors the S12.4 to whatever monitors you’re currently using, with options for 50, 60, 70, and 80Hz operation. You also get toggles for input sensitivity, polarity reverse, stand-by, and a ground lift for removing unwanted noise, facilitating even deeper tone tweaking at the flick of a switch. Not to mention, the S12.4’s footswitch jack is great for hands-free operation, allowing you to enable or disable the sub as well as the crossover filter (footswitch sold separately). All in all, the S12.4’s extensive feature set makes it the perfect companion for whatever setup you’re running.

    KRK S12.4 12-inch Powered Studio Subwoofer Features:

    • High-powered studio subwoofer that complements any set of studio monitors
    • 12-inch Kevlar aramid composite woofer handles high SPLs without distortion
    • Extensive I/O with XLR, TRS, and RCA options
    • Front-firing bass port and Class D amplifier
    • Low-profile cabinet fits comfortably into setups of all kinds
    • 50–80Hz selectable crossover filter customizes sub response
    • Sensitivity switch for use with pro or consumer audio equipment
    • Ground lift and polarity switch overcome setup issues
    • Footswitchable bypass (footswitch sold separately)
    • Frequency response: 26Hz–97Hz

    Tech Specs

    • Powered:Yes
    • Speaker Size:12″
    • Driver Type:Woven Kevlar Woofer
    • Total Power :220W Class D
    • Frequency Range:23Hz-130Hz (-10dB)
    • Maximum Peak SPL:120 dB SPL @ 1m
    • Input Types:2 x XLR, 2 x 1/4″, 1 x Dual RCA Stereo
    • Output Types:2 x XLR, 2 x 1/4″, 1 x Dual RCA Stereo
    • Other I/O:1 x 1/4″ (footswitch)
    • Enclosure Type:Front Ported
    • Enclosure Material:18mm Reinforced MDF with Black Vinyl wrap
    • Height:18.11″
    • Width:15.94″
    • Depth:22.64
    • Weight:66.5 lbs.
    • Manufacturer Part Number:S12.4

     

    Quick View
X