Showing all 3 results
-
M-Audio BX4 Powered Studio Monitors
₹14,999.00Read moreStop Mixing on Low-quality Multimedia Speakers
Mixing on subpar studio monitors is an exercise in futility that will only lead to frustration. So, do your mixes a huge favor by upgrading to a pair of M-Audio BX4 monitors. Each of these compact studio monitors deploys a 4.5-inch Kevlar woofer and a 1-inch silk dome tweeter to deliver the clarity and detail you need to make proper mix decisions. A computer-optimized waveguide ensures precise imaging; an enhanced rear-mounted port works in concert with each speaker’s acoustically inert MDF cabinet and bass reflex design to yield low-end extension down to 69Hz. And if you need to further dial in your sounds, each BX4 includes a High- and Low-EQ control.
Built to deliver critical detail, nuance, and dynamic accuracy
Each BX4 was meticulously engineered to provide accurate sound reproduction. It all starts with a high-quality 4.5-inch Kevlar woofer and 1-inch natural silk dome tweeter, which ably cover the 69Hz–22kHz frequency range. Imaging is spot-on, thanks to a computer-optimized tweeter waveguide, while an enhanced rear port delivers extended low-frequency response. An acoustically inert MDF cabinet with a bass reflex design also contributes to the deep, rich sound of these studio monitors. You also get High- and Low-EQ controls for dialing in your sound.
Jam-packed with convenient features
Each M-Audio BX4 is jam-packed with convenient features. A Left/Right Active Speaker Position switch enables you to configure which side has a volume control. The 1/4-inch, 1/8-inch, and RCA inputs accommodate just about any audio source — you even get an 1/8-inch to 1/8-inch cable and an 1/8-inch to RCA cable in the box! This set of BX4 studio monitors includes a software suite with Pro Tools | First M-Audio Edition and 20 Avid effect plug-ins, so you can start making music right away.
M-Audio BX4 Studio Monitors Features:
- Offers a studio-quality upgrade from subpar multimedia speakers
- High-quality 4.5-inch Kevlar woofer and 1-inch silk dome tweeter ably cover 69Hz–22kHz
- Computer-optimized tweeter waveguide ensures precise imaging
- Enhanced rear port delivers extended low-frequency response
- Acoustically inert MDF cabinet with a bass reflex design yields a deep, rich sound
- High- and Low-EQ controls make dialing in your sound easy
- Left/Right Active Speaker Position switch configures which side has a volume control
- 1/4-inch, 1/8-inch, and RCA inputs accommodate just about any audio source
- An 1/8-inch to 1/8-inch cable and an 1/8-inch to RCA cable are included
- Comes with Pro Tools | First M-Audio Edition and 20 Avid effect plug-ins
Tech Specs
- Powered:Yes
- Power Configuration:Bi-amped
- LF Driver Size:4.5″ Woofer
- LF Driver Type:Black Kevlar
- HF Driver Size:1″ Tweeter
- HF Driver Type:Silk dome
- Total Power:120W Peak / 2 x 25W RMS
- Frequency Response:69Hz-22kHz
- Input Types:1 x 1/8″ (aux), 1 x Dual RCA Stereo, 2 x 1/4″ (L/R)
- Output Types:1 x 1/8″ (to passive speaker), 1 x 1/8″ (headphones)
- Enclosure Type:Rear Ported
- Enclosure Material:Vinyl-laminated MDF
- Height:8.9″
- Width:6.1″
- Depth:6.9″
- Weight:9.83 lbs.
- Manufacturer Part Number:BX4
-
M-Audio BX5D3 Powered Studio Monitors
₹13,499.00Add to cartMonitor Performance Starts with Driver Excellence
A monitor’s drivers are the heart and soul of its performance. Driving the low-end and midrange, M-Audio BX5D3 5-inch military-grade Kevlar® woofers are rigid and lightweight, delivering outstanding transient response whist negating unwanted “cone breakup.” BX5- D3’s treated silk dome tweeter provides the perfect combination of low mass and the absence of audible resonances that plague conventional tweeters. Together, the BX drivers deliver critical detail, nuance and dynamic accuracy, so your mixes have the veracity and transparency you demand.
More Than Just an Enclosure
With M-Audio’s BX5-D3, every detail has been meticulously engineered with one goal in mind – to facilitate the freedom to mix with confidence. BX5-D3 monitors have a rear- mounted bass port, meticulously engineered to the exact length and diameter. The result? Deep, defined bass response with maximum bass extension and resolution. When combined with a smoothly-flared port, BX5-D3 monitors markedly reduce the audibly-intrusive air turbulence that results when bass is played back at high sound pressure levels (SPLs). BX5-D3’s tweeter is mounted in a custom waveguide for reliably accurate dispersion that eliminates unwanted high-frequency “scatter,” whilst ensuring a soundstage that remains consistently wide and stable. For seamless setup and easy-location of the optimum listening position, the BX5-D3’s front-mounted positioning LED shines brightly when you’re located in the perfect listening spot, for uncompromisingly accurate and reliable critical evaluations. Finally, BX5-D3’s iconic design on the front panel—M-Audio’s famous “keyhole” shape—is more than just an attractive look: This special “fastenerless” design ensures so there are no driver attachment screw heads to interfere with the sound coming from our drivers.
-
M-Audio BX8D3 Powered Studio Monitors
₹22,499.00Add to cartMonitor Performance Starts with Driver Excellence
A monitor’s drivers are the heart and soul of its performance. Driving the low-end and midrange, M-Audio BX8D3 8-inch military-grade Kevlar® woofers are rigid and lightweight, delivering outstanding transient response whist negating unwanted “cone breakup.” BX8- D3’s treated silk dome tweeter provides the perfect combination of low mass and the absence of audible resonances that plague conventional tweeters. Together, the BX drivers deliver critical detail, nuance and dynamic accuracy, so your mixes have the veracity and transparency you demand.
More Than Just an Enclosure
With M-Audio’s BX8-D3, every detail has been meticulously engineered with one goal in mind – to facilitate the freedom to mix with confidence. BX8-D3 monitors have a rear- mounted bass port, meticulously engineered to the exact length and diameter. The result? Deep, defined bass response with maximum bass extension and resolution. When combined with a smoothly-flared port, BX8-D3 monitors markedly reduce theaudibly-intrusive air turbulence that results when bass is played back at high sound pressure levels (SPLs). BX8-D3’s tweeter is mounted in a custom waveguide for reliably accurate dispersion that eliminates unwanted high-frequency “scatter,” whilst ensuring a soundstage that remains consistently wide and stable. For seamless setup and easy-location of the optimum listening position, the BX8-D3’s front-mounted positioning LED shines brightly when you’re located in the perfect listening spot, for uncompromisingly accurate and reliable critical evaluations. Finally, BX8-D3’s iconic design on the front panel—M-Audio’s famous “keyhole” shape—is more than just an attractive look: This special “fastenerless” design ensures so there are no driver attachment screw heads to interfere with the sound coming from our drivers.
