Shop

Showing 181–192 of 925 results

Compare
Quick View
Klark Teknik DI10A Active DI Box
Audio Interfaces & DI Boxes
₹7,999.00
Powerfully Pristine Audio
Boasting massive headroom, dynamic range, and sonic clarity, the Klark Teknik DI 10A has you covered. Experience the ultra-clean active circuitry powered by +48V phantom power. Perform with full confidence with the built-in 9-volt battery back up; even if you lose phantom power, you won’t lose the crisp clarity of your performance because this battery automatically kicks in when it’s needed. Techs love the active circuitry that gives the DI 10A a high headroom and a wide dynamic range to effectively capture the instrument, sampler, or other balanced stereo source you’ve got plugged in. You can also take this active box with you anywhere: the rubber corner bumpers and thick, rugged aluminum housing give the DI 10A the ability to withstand the bumps and bruises of life on the road or in the studio. With time-trusted Midas transformers added, the DI 10A will provide you with reliable, crystalline audio every time you use it.
Klark Teknik DI 10A Features:

Powered by +48v console phantom power

High-quality Neutrik XLR and high impedance 1/4-inch TS connectors to maintain the highest signal integrity

Easily accommodates signal levels ranging from +10 to +50 dBu

Forget ground looping problems with the earth lift switch

Switchable input attenuator for signal levels from instruments to loudspeakers

9V battery backup

Tech Specs

Type:Active

Channels:1

Pads:-20dB, -40dB

Ground Lift:Yes

Inputs:1 x 1/4″, 1 x XLR

Outputs:1 x XLR

Other I/O:1 x 1/4″ (thru)

Power Source:48V Phantom Power

Height:2.5″

Depth:4.7″

Width:4.6″

Weight:1.2 lbs.
Add to cart
Compare
Quick View
Klark Teknik DN100 V2 Active Mono DI Box
Audio Interfaces & DI Boxes
₹7,999.00
Phantom-powered Active Circuitry Unleashes Clean Headroom
An active DI like the Klark Teknik DN100 V2 can dramatically enhance your stage and studio setup. The DN100 V2 boasts an ultra-clean active circuitry that’s powered by standard 48-volt phantom power from your console — just connect the XLR output to your board, engage that channel’s phantom power, and that’s all there is to it. This active circuitry gives the DN100 V2 a high headroom and a wide dynamic range to accurately capture the keyboard, guitar modeler, or other balanced instrument source you’ve got plugged in. In addition to being a convenient way to get a stage signal into your board over long distances, the DN100 V2 also gives you parallel XLR and TRS outputs that’ll let you send your signal to an amplifier or other input source. Around back, Pad and Earth switches insulate your signal against unwanted overages and excess hum due to ground loops. Worried about rowdy performers stomping all over your gear? The Klark Teknik DN100 V2’s thick aluminum housing and rough-and-tumble silicone rubber bumpers are enough to instill confidence in the most protective sound engineer. Take it from us: if you’re in the market for a high-performance active DI that can take a tumble and won’t break the bank, then the Klark Teknik DN100 V2 is a fine choice.
Klark Teknik DN100 V2 Active Direct Box Features:

High headroom and wide dynamic range

Ultra-clean active circuitry

Converts a balanced line-level signal to mic level

Powered by 48-volt console phantom power

A convenient way to get a keyboard signal into your board over long distances

Output transformer optimized for frequency and phase response

Parallel-wired XLR and TRS outputs let you send your input signal into an amp or other source

Durable aluminum housing with silicone rubber bumpers

-20dB pad protects against unwanted overages

Earth lift switch eliminates ground loop problems

Tech Specs

Type:Active

Channels:1

Pads:-20dB

Ground Lift:Yes

Inputs:1 x 1/4″, 1 x XLR

Outputs:1 x XLR

Other I/O:1 x 1/4″ (link thru)

Power Source:48V Phantom Power

Height:2.5″

Depth:4.4″

Width:4.7″

Weight:0.97 lbs.

Manufacturer Part Number:0809-AAR86-001
Add to cart
Compare
Quick View
Klark Teknik DN200 V2 Active Stereo DI Box
Audio Interfaces & DI Boxes
₹18,999.00
Phantom-powered Active Circuitry Unleashes Clean Headroom
An active DI like the Klark Teknik DN200 V2 can dramatically enhance your stage and studio setup. The stereo DN200 V2 boasts an ultra-clean active circuitry that’s powered by standard 48-volt phantom power from your console — just connect the XLR output to your board, engage each channel’s phantom power, and that’s all there is to it. This active circuitry gives the DN200 V2 a high headroom and a wide dynamic range to accurately capture the instrument, laptop, phone, or other balanced stereo source you’ve got plugged in. This is accomplished by using the side-by-side stereo XLR combo jacks on the front or the convenient 3.5mm stereo TRS jack right next door. With the flip of a couple switches, stereo signals coming into the DN200 V2 can quickly be summed to mono, while mono sources can be split into two destinations. This gives you incredible flexibility that would normally be accomplished through the use of an external device (and would otherwise require several additional cables and rounds of plug-in gymnastics). Around back, Pad and Earth switches insulate your signal against unwanted overages and excess hum due to ground loops. Worried about rowdy performers stomping all over your gear? The Klark Teknik DN200 V2’s thick aluminum housing and rough-and-tumble silicone rubber bumpers are enough to instill confidence in the most protective sound engineer. Take it from us: if you’re in the market for a high-performance active DI that can take a tumble and won’t break the bank, then the Klark Teknik DN200 V2 is a fine choice.
Klark Teknik DN200 V2 Stereo Active Direct Box Features:

High headroom and wide dynamic range

Ultra-clean active circuitry

Dual XLR combo inputs for stereo amp modelers and keyboards

1/8-inch TRS input for laptops and phones

Sum switch: folds stereo inputs down to a single mono output

Split switch: sends identical mono inputs to 2 destinations

Powered by 48-volt console phantom power

A convenient way to get stage signals into your board over long distances

Output and power transformers optimized for performance and isolation

Durable aluminum housing with silicone rubber bumpers

-20dB pad protects against unwanted overages

Earth lift switch eliminates ground loop problems

Tech Specs

Type:Active

Channels:1

Pads:-20dB

Ground Lift:Yes

Inputs:2 x XLR

Outputs:2 x XLR

Other I/O:2 x 1/4″ (link thru)

Power Source:48V Phantom Power

Height:2.5″

Depth:4.7″

Width:5.6″

Weight:1.43 lbs.

Manufacturer Part Number:0809-AAS86-001
Add to cart
Compare
Quick View
KRK Classic 5 (pair) Powered Studio Monitors
Studio Monitors
₹29,599.00
Affordable Flat-frequency Studio Monitors

When you look at the past three decades of KRK monitor development, it’s clear to see that they’re absolutely devoted to providing high-quality studio monitoring without the high price tag. These Classic 5 reference speakers are some of the most value-packed options.They borrow heavily from the award-winning, industry-leading Rokit series, including their Class A/B amplifiers, built-in limiters, and custom 5″ glass aramid composite woofers. However, Classic 5s are intended for more critical mixing applications than Rokits, making these nearfield monitors a great choice for editing suites and small studios.
Ideal for critical listening

There are many going theories about mixing. The prevailing one these days is to mix on speakers with as close to flat frequency responses possible. When your monitors are flat, you can mix free from the character hi-fi stereo systems use to enhance music. That makes it a lot easier to craft mixes that will translate (sound the same) from one set of consumer speakers to another. While KRK Rokit series speakers are a bit more flattering, Classic 5s are flat and critical, making them complements each other perfectly. And at this price, outfitting your studio with a second pair of monitors for A/B comparison is easily within reach.

Easily tuned to your room

In true KRK style, Classic 5 studio monitors are incredibly easy to tune to your room. They include two frequency controls that let you fine tune the high and low frequency ranges. For instance, if you’re in a space that forces you to keep your Classic 5s near a wall or corner, you can cut some of those lows. Or, if you’re in an overly reflective space cutting some of the highs by a decibel may be just what you need.

Bulletproof design

When you breakdown the Classic 5, it’s hard to imagine how KRK justifies making them so affordable. For starters, there are the speakers themselves. The woofer is made from layered glass aramid fibers — literally bulletproof material that keeps its shape while remaining light. This results in ultra low distortion and clear frequency expression. Likewise, the front ported design keeps your low end tight and honest. Top it off with a fantastic Class A/B amp, smooth soft-dome tweeter, and professional connections including both unbalanced RCA and balanced TRS and XLR, and Classic 5 studio monitors go well above and beyond their class

KRK Classic 5 Studio Monitors Features:

Nearfield studio monitors that are perfect for mixing and critical listening

Flat frequency response is idea for critical listening, mixing, and editing

Layered 5″ glass aramid fiber low-frequency driver and soft dome tweeter provide smooth sound with minimal distortion

Class A/B amplifier with integrated limiter delivers consistent sound that won’t overload

Front-slotted bass port and frequency controls reduce boundary coupling and accommodate for less-than-idea acoustics

Professional connectivity accommodate all kinds of systems

Tech Specs

Powered:Yes

Power Configuration:Single Amp

LF Driver Size:5″ Woofer

LF Driver Type:Glass Aramid Fiber

HF Driver Size:1″ Tweeter

HF Driver Type:Soft Dome

Total Power:50W Class A-B

Frequency Response:46Hz-34.5kHz

Maximum Peak SPL:101 dB SPL @ 1m

Input Types:1 x XLR, 1 x RCA, 1 x 1/4″

Enclosure Type:Front Ported

Height:11.2″

Width:7.4″

Depth:9.68″

Weight:12.95 lbs.

Manufacturer Part Number:CL5G3-NA
Read more
Compare
Quick View
KRK Classic 7 Powered Studio Monitor
Studio Monitors
₹22,299.00
Classic KRK Sound with Enhanced Mixing Capability

The Classic 7 Powered Studio Monitor effortlessly delivers the renowned sonic accuracy and performance that has come to be synonymous with KRK. This is due in part to taking a page out of the book of the company’s successful ROKIT line: the Classic 7 defaults to a flat frequency that invites more critical listening, which in turn makes your mixes more accurate. You also benefit from the +2 dB KRK Bass Boost, enhancing the the response of the lower end of your mix with clear, convincing results. The Classic 7 is an active monitor boasting a 7-inch glass woofer and 1-inch soft dome tweeter that combine for an impressive 73 watts of power. It features universal connectivity with XLR, 1/4 inch TRS, and RCA inputs — making it compatible with just about any audio interface or mixer you want to pair with it. Producers here are big fans of the system-optimized auto limiter, which drastically reduces sporadic peaks and protects both the speaker and overall sound.
Dual threat with connectivity and clarity

Whether you’re mixing a precise sound setup, or looking for accurate playback while producing, the Classic 7 is sure to deliver top-shelf results. Run mic cables with the XLR input, link your TRS cable for a larger stereo sound, and use the RCA as your phono connector. Additionally, the built in-volume control, auto limiter, and bass boost allow you to fine-tune your sound with crisp accuracy every time. Plus, foam isolation pads underneath the Classic 7 do more than just protect the surface your monitor sits on; they also improve clarity and overall sonic delivery.

KRK Classic 7 Powered Studio Monitor Features:

7-inch woofer and 1-inch tweeter for impressive volume and presence through 73W of power

Facilitates improved critical listening through ROKIT-inspired flat frequency default

Included +2 dB KRK Bass Boost to emphasize low-end frequencies

Smart companion for mixers and audio interfaces in the studio

Great connectivity options through XLR, TRS, and RCA inputs

Built-in auto limiter to reduce harmful and unwanted peaking

Foam isolation pads for surface protection and improved clarity

Tech Specs

Powered:Yes

Power Configuration:Bi-amped

LF Driver Size:7″ Woofer

LF Driver Type:Glass Aramid

HF Driver Size:1″ Tweeter

HF Driver Type:Soft Dome

LF Driver Power Amp:48W

HF Driver Power Amp:25W

Total Power:73W Class AB

Frequency Range:37Hz-40kHz

Frequency Response:47.5Hz-34.5kHz

Crossover Frequency:2.3kHz

Maximum Peak SPL:101 dB

Input Types:1 x XLR, 1 x 1/4″ TRS, 1 x RCA

Features:High/Low Frequency Boost/Cut

Enclosure Type:Front Ported

Enclosure Material:MDF with Black Vinyl wrap

Height:11.40″

Width:8.90″

Depth:13.07″

Weight:18.5 lbs.

Manufacturer Part Number:CL7G3-NA
Add to cart
Compare
Quick View
KRK Classic 8 Powered Studio Monitor
Studio Monitors
₹27,899.00
Classic KRK Sound with Enhanced Mixing Capability

The Classic 8 Powered Studio Monitor effortlessly delivers the renowned sonic accuracy and performance that has come to be synonymous with KRK. This is due in part to taking a page out of the book of the company’s successful ROKIT line: the Classic 8 defaults to a flat frequency that invites more critical listening, which in turn makes your mixes more accurate. You also benefit from the +2 dB KRK Bass Boost, enhancing the the response of the lower end of your mix with clear, convincing results. The Classic 8 is an active monitor boasting an 8-inch glass woofer and 1-inch soft dome tweeter that combine for an impressive 100 watts of power. It features universal connectivity with XLR, 1/4 inch TRS, and RCA inputs — making it compatible with just about any audio interface or mixer you want to pair with it. Studio producers are big fans of the system-optimized auto limiter, which drastically reduces sporadic peaks and protects both the speaker and overall sound.
Dual threat with connectivity and clarity

Whether you’re mixing a precise sound setup, or looking for accurate playback while producing, the Classic 8 is sure to deliver top-shelf results. Run mic cables with the XLR input, link your TRS cable for a larger stereo sound, and use the RCA as your phono connector. Additionally, the built in-volume control, auto limiter, and bass boost allow you to fine-tune your sound with crisp accuracy every time. Plus, foam isolation pads underneath the Classic 8 do more than just protect the surface your monitor sits on; they also improve clarity and overall sonic delivery.

KRK Classic 8 Powered Studio Monitor Features:

8-inch woofer and 1-inch tweeter for impressive volume and presence through 100W of power

Facilitates improved critical listening through ROKIT-inspired flat frequency default

Included +2 dB KRK Bass Boost to emphasize low-end frequencies

Smart companion for mixers and audio interfaces in the studio

Great connectivity options through XLR, TRS, and RCA inputs

Built-in auto limiter to reduce harmful and unwanted peaking

Foam isolation pads for surface protection and improved clarity

Tech Specs

Powered:Yes

Power Configuration:Bi-amped

LF Driver Size:8″ Woofer

LF Driver Type:Glass Aramid

HF Driver Size:1″ Tweeter

HF Driver Type:Soft Dome

LF Driver Power Amp:75W

HF Driver Power Amp:25W

Total Power:100W Class AB

Frequency Range:35Hz-35kHz

Frequency Response:42.5Hz-28kHz

Crossover Frequency:2.0kHz

Maximum Peak SPL:106 dB

Input Types:1 x XLR, 1 x 1/4″ TRS, 1 x RCA

Features:High/Low Frequency Boost/Cut

Enclosure Type:Front Ported

Enclosure Material:MDF with Black Vinyl wrap

Height:12.40″

Width:10.82″

Depth:15.60″

Weight:24.6 lbs.

Manufacturer Part Number:CL8G3-NA
Add to cart
Compare
Quick View
KRK GOAUX3 Powered Studio Monitors
Studio Monitors
Portable Power Unleashed
When it comes to portable studio-grade monitors with unbeatable performance, KRK’s GOAUX system delivers on all counts. This GOAUX3 monitor system comes with a pair of 3-inch portable monitors. A 2-way system provides excellent bass and treble definition with up to 98dB SPL that’s perfect for most studio needs. The GOAUX3 system offers ample ways to connect with RCA, 3.5mm TRS, and Bluetooth options for playing source audio. What’s more, it all comes packaged in a padded travel bag with isolation stands and kickstart cabling, so you’re ready to get started right out of the box. Don’t delay, grab yours from us today!
KRK GOAUX3 3-inch Powered Portable Studio Monitor Pair Features:

Powered monitor pair with 3-inch speakers

2-way monitoring design provides quality audio response across frequencies

98dB SPL with bi-amped Class D power

RCA, 3.5mm TRS, and Bluetooth input options

Includes padded travel bag, isolation stands, and cabling

Tech Specs

Powered:Yes

Power Configuration:Bi-amped

Quantity:Pair

LF Driver Size:3″ Woofer

LF Driver Type:Woven Glass Aramid

HF Driver Size:1″ Tweeter

HF Driver Type:Soft Textile Dome

LF Driver Power Amp:22W

HF Driver Power Amp:8W

Total Power:60W (30W per side)

Frequency Range:60Hz-22kHz (-10dB)

Frequency Response:65Hz-20kHz (-3dB)

Crossover Frequency:2.5kHz

Maximum Peak SPL:105dB SPL

Input Types:1 x Dual RCA Stereo, 1 x 1/8 TRS”

Output Types:1 x 1/8″ (headphones)

Bluetooth:Yes

Enclosure Type:Rear Ported

Enclosure Material:ABS

Height:6.8″

Width:4.37″

Depth:4.72″

Weight:6.94 lbs. (Including both speakers, stands, carrying bag, included accessories)

Manufacturer Part Number:GOAUX3-NA
Read more
Compare
Quick View
KRK GOAUX4 Powered Studio Monitors
Studio Monitors
Portable Power Unleashed
When it comes to portable studio-grade monitors with unbeatable performance, KRK’s GOAUX system delivers on all counts. This GOAUX4 monitor system comes with a pair of 4-inch portable monitors. A 2-way system provides excellent bass and treble definition with up to 100dB SPL that’s perfect for most studio needs. The GOAUX4 system offers ample ways to connect with RCA, 3.5mm TRS, and Bluetooth options for playing source audio. What’s more, it features a handy 1-button automatic room correction tool and measurement mic, plus a padded travel bag with isolation stands and kickstart cabling — it’s everything you need for perfect sound right out of the box. Don’t delay, grab yours from us today!
KRK GOAUX4 4-inch Powered Portable Studio Monitor Pair Features:

Powered monitor pair with 4-inch speakers

2-way monitoring design provides quality audio response across frequencies

100dB SPL with bi-amped Class D power

Automatic room correction (1-button tool, measurement mic included)

RCA, 3.5mm TRS, and Bluetooth input options

Includes padded travel bag, isolation stands, and cabling

Tech Specs

Powered:Yes

Power Configuration:Bi-amped

Quantity:Pair

LF Driver Size:4″ Woofer

LF Driver Type:Woven Glass Aramid

HF Driver Size:1″ Tweeter

HF Driver Type:Soft Textile Dome

LF Driver Power Amp:33W

HF Driver Power Amp:17W

Total Power:100W (50W per side)

Frequency Range:55Hz-22kHz (-10dB)

Frequency Response:60Hz-20kHz (-3dB)

Crossover Frequency:2.5kHz

Maximum Peak SPL:108dB SPL

Input Types:1 x Dual RCA Stereo, 1 x 1/8″ TRS, 2 x 1/4″ TRS

Output Types:1 x 1/8″ (headphones)

USB:1 x Type B

Bluetooth:Yes

Enclosure Type:Rear Ported

Enclosure Material:ABS

Height:8.07″

Width:5.35″

Depth:5.51″

Weight:9.48 lbs (Including both speakers, stands, carrying bag, included accessories)

Manufacturer Part Number:GOAUX4-NA
Read more
Compare
Quick View
KRK S10.4 Powered Studio Subwoofer
Studio Monitors
₹49,499.00
Big, Booming Bass for Any Studio Setup
KRK’s S10.4 10-inch Powered Studio Subwoofer makes it easier than ever to incorporate a subwoofer into your studio setup. Its extensive I/O allows for XLR, 1/4-inch TRS, and RCA connections, with an optional footswitch jack for hands-free operation of bypass and crossover filter features. When it’s time to fire up the S10.4, you’ll experience an incredibly tight and punchy low end delivered through a single 10-inch glass aramid composite woofer and a front-firing bass port. Its Class D amplifier pumps out the clean and clear sound discerning audiophiles constantly crave, with everything tucked neatly inside a low-profile cabinet that fits comfortably into any layout. Add the KRK S10.4 10-inch Powered Studio Subwoofer to your arsenal for big, booming bass you can rely on.
Bells and whistles for any situation

Not only does the S10.4 deliver rich, dynamic low end in any studio setup, but KRK also equipped it with a handy set of panel controls to fine-tune its sound to a variety of situations. An exceptionally powerful crossover filter tailors the S10.4 to whatever monitors you’re currently using, with options for 60, 70, 80, and 90Hz operation. You also get toggles for input sensitivity, polarity reverse, stand-by, and a ground lift for removing unwanted noise, facilitating even deeper tone tweaking at the flick of a switch. Not to mention, the S10.4’s footswitch jack is great for hands-free operation, allowing you to enable or disable the sub as well as the crossover filter (footswitch sold separately). All in all, the S10.4’s extensive feature set makes it the perfect companion for whatever setup you’re running.

KRK S10.4 10-inch Powered Studio Subwoofer Features:

High-powered studio subwoofer that complements any set of studio monitors

10-inch glass aramid composite woofer handles high SPLs without distortion

Extensive I/O with XLR, TRS, and RCA options

Front-firing bass port and Class D amplifier

Low-profile cabinet fits comfortably into setups of all kinds

60–90Hz selectable crossover filter customizes sub response

Sensitivity switch for use with pro or consumer audio equipment

Ground lift and polarity switch overcome setup issues

Footswitchable bypass (footswitch sold separately)

Frequency response: 30Hz–110Hz

Tech Specs

Powered:Yes

Speaker Size:10″

Driver Type:Glass Aramid Composite

Total Power :160W Class D

Frequency Range:27Hz-156Hz (-10dB)

Maximum Peak SPL:117 dB SPL @ 1m

Input Types:2 x XLR, 2 x 1/4″, 1 x Dual RCA Stereo

Output Types:2 x XLR, 2 x 1/4″, 1 x Dual RCA Stereo

Other I/O:1 x 1/4″ (footswitch)

Enclosure Type:Front Ported

Enclosure Material:15mm Reinforced MDF with Black Vinyl wrap

Height:15″

Width:14″

Depth:16.06″

Weight:34.5 lbs.
Add to cart
Compare
Quick View
KRK S12.4 Powered Studio Subwoofer
Studio Monitors
₹86,499.00
Big, Booming Bass for Any Studio Setup
KRK’s S12.4 12-inch Powered Studio Subwoofer makes it easier than ever to incorporate a subwoofer into your studio setup. Its extensive I/O allows for XLR, 1/4-inch TRS, and RCA connections, with an optional footswitch jack for hands-free operation of bypass and crossover filter features. When it’s time to fire up the S12.4, you’ll experience an incredibly tight and punchy low end delivered through a single 12-inch Kevlar aramid composite woofer and a front-firing bass port. Its Class D amplifier pumps out the clean and clear sound discerning audiophiles constantly crave, with everything tucked neatly inside a low-profile cabinet that fits comfortably into any layout. Add the KRK S12.4 12-inch Powered Studio Subwoofer to your arsenal for big, booming bass you can rely on.
Bells and whistles for any situation

Not only does the S12.4 deliver rich, dynamic low end in any studio setup, but KRK also equipped it with a handy set of panel controls to fine-tune its sound to a variety of situations. An exceptionally powerful crossover filter tailors the S12.4 to whatever monitors you’re currently using, with options for 50, 60, 70, and 80Hz operation. You also get toggles for input sensitivity, polarity reverse, stand-by, and a ground lift for removing unwanted noise, facilitating even deeper tone tweaking at the flick of a switch. Not to mention, the S12.4’s footswitch jack is great for hands-free operation, allowing you to enable or disable the sub as well as the crossover filter (footswitch sold separately). All in all, the S12.4’s extensive feature set makes it the perfect companion for whatever setup you’re running.

KRK S12.4 12-inch Powered Studio Subwoofer Features:

High-powered studio subwoofer that complements any set of studio monitors

12-inch Kevlar aramid composite woofer handles high SPLs without distortion

Extensive I/O with XLR, TRS, and RCA options

Front-firing bass port and Class D amplifier

Low-profile cabinet fits comfortably into setups of all kinds

50–80Hz selectable crossover filter customizes sub response

Sensitivity switch for use with pro or consumer audio equipment

Ground lift and polarity switch overcome setup issues

Footswitchable bypass (footswitch sold separately)

Frequency response: 26Hz–97Hz

Tech Specs

Powered:Yes

Speaker Size:12″

Driver Type:Woven Kevlar Woofer

Total Power :220W Class D

Frequency Range:23Hz-130Hz (-10dB)

Maximum Peak SPL:120 dB SPL @ 1m

Input Types:2 x XLR, 2 x 1/4″, 1 x Dual RCA Stereo

Output Types:2 x XLR, 2 x 1/4″, 1 x Dual RCA Stereo

Other I/O:1 x 1/4″ (footswitch)

Enclosure Type:Front Ported

Enclosure Material:18mm Reinforced MDF with Black Vinyl wrap

Height:18.11″

Width:15.94″

Depth:22.64

Weight:66.5 lbs.

Manufacturer Part Number:S12.4
Add to cart
Compare
Quick View
KRK S8.4 Powered Studio Subwoofer
Studio Monitors
₹37,999.00
Big, Booming Bass for Any Studio Setup
KRK’s S8.4 8-inch Powered Studio Subwoofer makes it easier than ever to incorporate a subwoofer into your studio setup. Its extensive I/O allows for XLR, 1/4-inch TRS, and RCA connections, with an optional footswitch jack for hands-free operation of bypass and crossover filter features. When it’s time to fire up the S8.4, you’ll experience an incredibly tight and punchy low end delivered through a single 8-inch glass aramid composite woofer and a front-firing bass port. Its Class D amplifier pumps out the clean and clear sound discerning audiophiles constantly crave, with everything tucked neatly inside a low-profile cabinet that fits comfortably into any layout. Add the KRK S8.4 8-inch Powered Studio Subwoofer to your arsenal for big, booming bass you can rely on.
Bells and whistles for any situation

Not only does the S8.4 deliver rich, dynamic low end in any studio setup, but KRK also equipped it with a handy set of panel controls to fine-tune its sound to a variety of situations. An exceptionally powerful crossover filter tailors the S8.4 to whatever monitors you’re currently using, with options for 70, 80, 90, and 100Hz operation. You also get toggles for input sensitivity, polarity reverse, stand-by, and a ground lift for removing unwanted noise, facilitating even deeper tone tweaking at the flick of a switch. Not to mention, the S8.4’s footswitch jack is great for hands-free operation, allowing you to enable or disable the sub as well as the crossover filter (footswitch sold separately). All in all, the S8.4’s extensive feature set makes it the perfect companion for whatever setup you’re running.

KRK S8.4 8-inch Powered Studio Subwoofer Features:

High-powered studio subwoofer that complements any set of studio monitors

8-inch glass aramid composite woofer handles high SPLs without distortion

Extensive I/O with XLR, TRS, and RCA options

Front-firing bass port and Class D amplifier

Low-profile cabinet fits comfortably into setups of all kinds

70–100Hz selectable crossover filter customizes sub response

Sensitivity switch for use with pro or consumer audio equipment

Ground lift and polarity switch overcome setup issues

Footswitchable bypass (footswitch sold separately)

Frequency response: 34.5Hz–133Hz

Tech Specs

Powered:Yes

Speaker Size:8″

Driver Type:Glass Aramid Composite

Total Power :109W Class D

Frequency Range:29Hz-205Hz (-10dB)

Maximum Peak SPL:112.8 dB SPL

Input Types:2 x XLR, 2 x 1/4″, 1 x Dual RCA Stereo

Output Types:2 x XLR, 2 x 1/4″, 1 x Dual RCA Stereo

Other I/O:1 x 1/4″ (footswitch)

Enclosure Type:Front Ported

Enclosure Material:15mm Reinforced MDF

Height:13.3″

Width:11.57″

Depth:14.25″

Weight:26.01 lbs.

Manufacturer Part Number:S8.4
Add to cart
Compare
Quick View
LD Systems MAUI 28 G2
Portable PA Systems
₹234,650.00
The LD Systems MAUI 28 G2 is a portable, Class-D powered, vertical array system delivering 2000W of peak power with plug-and-play convenience. Featuring an integrated 4-channel mixer in the subwoofer base and a 2-piece column system, it can be used as an all-in-one solution for solo performers, small groups, mobile DJs corporate meetings, and more.

The subwoofer enclosure houses two 8.0″ subwoofers, as well as the system’s Class-D amplification with overcurrent, short-circuit, and thermal protection. The mixer offers Bluetooth technology for wireless streaming and includes inputs for a microphone, a stereo line, and a hi-Z for guitar and bass. Additionally, the Bluetooth receiver section also includes an 1/8″ stereo input for connecting portable music players.

The MAUI 28 G2 Portable PA system has individual level controls for subwoofer and master volumes, and features DynX DSP with built-in limiting, EQ, compression, and crossovers to help with room correction and ensures a properly balanced performance. It assembles in seconds with custom multi-pin connectors and will fit onto any car seat.
Key Features

Vertical Array System

Class-D Powered: 2000W Peak

4-Channel Mixer with Bluetooth Receiver

120° Horizontal Coverage

LF Drivers: 2 x 8″

Midrange Drivers: 16 x 3″

High-Frequency Drivers: 2 x 1″

DynX DSP with 24-Bit Signal Processing

Mic, Line, Hi-Z & MP3 Inputs

Short-Circuit Overload Protection
Add to cart