Passive Speakers

Showing 1–16 of 25 results

  • 0 out of 5

    JBL CBT50LA-1 (White) Line Array Column Speaker

    40,999.00

    Amazingly Balanced Sound for Large Rooms

    The JBL CBT 50LA-1 passive speaker uses JBL’s breakthrough Constant Beamwidth Technology to produce a column speaker with incredibly balanced projection across a large area. Passive column speakers normally create inconsistencies in sound when you move about the room, but not the CBT 50LA-1! JBL’s patent-pending design uses an array of eight full-range 2″ drivers with 150 watts of power capacity, and the result is consistent, natural sound coverage – both horizontally and vertically. Perfect for large rooms like churches, school auditoriums, and theaters, the CBT 50LA-1 is easy to install as well as easy to optimize for your room. Call us today to find out how you can integrate the JBL CBT 50LA-1 passive speakers into your live sound system!

    Innovative design for superior sound coverage

    The JBL CBT 50LA-1 handles 150 watts of power to drive an array of eight full-range 2″ speakers. That may not seem like much, but 10 years of research have created a column speaker that uses analog delay beam-forming and amplitude tapering to make sure directivity is even across the CBT 50LA-1’s extended 80Hz-20kHz frequency range. It’s new technology, and the result is even, balanced sound without frequency lobing inconsistencies as you move around the coverage area.

    Perfect for performance and speech

    Any place you need clear, balanced sound that covers a large area well, the JBL CBT 50LA-1 will deliver. Switchable voicings let the CBT 50LA-1 use a flat frequency response for music playback, as well as a speech mode with a midrange presence boost. It’s ideal for school auditoriums and churches, allowing your message to be heard clearly throughout the room. Anywhere you have a large room that requires lots of coverage without the compromise of dead spots or frequency lobing, the CBT 50LA-1 is ready to perform.

    Easy to install

    JBL’s CBT 50LA-1 column speakers come with a swiveling wall bracket, and also have 10 threaded insert points on the rear of the fiberglass reinforced ABS cabinet. Contractors love how easy it is to install the CBT series, and it’s easy to position them for the maximum coverage in your room. Call us to find out more about how to integrate the CBT 50LA-1 into your sound system!

    JBL CBT 50LA-1 Passive Speaker Features:

    • Passive column speaker for installation with incredibly balanced horizontal and vertical directivity
    • 150W RMS power handling 2 hours continuous operation, 100W RMS power handling 100 hours continuous
    • 80Hz-20kHz frequency range is perfect for both music or speech
    • Switchable voicing adds a presence boost for speech applications
    • SonicGuard overload protection prevents distortion
    • Built-in 70V/100V transformer, and 8 ohm direct capability, for flexible installation

    Tech Specs

    • Powered:No
    • Speaker Size:8 x 2″
    • Power Rating:150W
    • Total Power:600W
    • Impedance:8 ohms
    • Frequency Range:80Hz-20kHz (-10dB)
    • Maximum Peak SPL:121dB
    • Horizontal Coverage Angle:150 Degrees
    • Vertical Coverage Angle:20 Degrees
    • Enclosure Material:Fiberglass Reinforced ABS Cabinet
    • Mounting Options:Wall Mount (hardware included), Multiple Fly Points
    • Height:20.8″
    • Width:3.9″
    • Depth:6″
    • Weight:9 lbs.
    • Manufacturer Part Number:CBT 50LA-1-WH

     

    Quick View
  • 0 out of 5

    JBL VRX932LA-1 Line Array Passive Speakers

    124,999.00

    Line-array Cabinets from Industry-leader JBL!

    While intended for smaller venues than the VerTec series, the VRX932LA Constant Curvature Line Array is designed and built to the same high standards and uses the same advanced, concert-proven drivers. The VRX932LA delivers extraordinary power handling, clarity, flexibility and, of course, stunning JBL sound in an attractive, easy to handle and affordable package. The VRX932LA is a perfect fit for medium-sized venues that don’t want to sacrifice sound quality just because they’re not as big as other professional facilities. For compact power, it’s the VRX932LA.

    JBL VRX932LA Line Arrays at a Glance:

    • Lightweight and built for smaller venues
    • Great power handling and sound
    • Flexible mounting options

    Lightweight and built for smaller venues

    The VRX932LA is a lightweight (48 lb.) compact 12″ two-way line array speaker system designed for use in arrays of up to six units. VRX932LA is the ideal choice when line-array performance is needed but the venue size doesn’t call for the very long-throw characteristics of larger line-arrays such as JBL’s VerTec. The Constant Curvature waveguide
    mounts two compression drivers on a continuous arc. When additional VRX932LA speakers are added to the array the uninterrupted arc continues. In effect, all the drivers work together as if they were a single driver on a very long waveguide.

    Great power handling and sound

    Since there are two HF drivers in each VRX932LA, the combined power handling and acoustic output of the system is far greater than a single driver could achieve. VRX932LA uses “amplitude shading” to shape the coverage of the array. Switches on the input plate allow, for example, the upper box in an array to reach the distant rear of a room while the lower box is shaded back to reduce excessive level at the front of the listening area.

    Flexible mounting options

    One or two VRX932LAs may also be used on a tripod or over the VRX915S subwoofer. The integral rigging hardware is used to securely lock the array together. As many as six VRX932LA speaker systems may be suspended in a single array for a nominal vertical coverage of up to 90. Suspended applications require the JBL VRX932LA-SMAF array frame (available separately). For applications in which the array must be aimed sharply down, a second Array Frame may be installed to the bottom of the array serving as a pull-back.

    JBL VRX932LA Line Arrays Features:

    • Frequency Range (-10dB)1: 57Hz – 20kHz
    • Frequency Response (+/-3dB)1: 75Hz – 20kHz
    • Coverage Pattern: 100 x 15 nominal
    • Crossover Modes: Bi-amp / passive, externally switchable
    • Crossover Frequency: 1.2kHz
    • Power Rating Passive: 800 W / 1600 W / 3200 W (Continuous/Program/Peak)2: Bi-amp LF: 800 W / 1600 W / 3200 W
    • Bi-amp HF: 75 W / 150 W / 300 W
    • LF Driver: 1 x JBL 2262H 12 in Differential Drive woofer with neodymium-magnet, dual voice-coils and magnetic gap.
    • HF Driver: 3 x JBL 2407J, 1.0 in voice-coil, neodymium compression driver
    • Nominal Impedance: Passive: 8 ohm
    • Bi-amp LF: 8 ohms
    • Bi-amp HF: 8 ohms
    • Active Tunings: Tunings available at www.jblpro.com
    • Enclosure: 18 mm, 11-ply birch plywood.
    • Suspension / Mounting: Optional VRX-AF line array frame kit; M-10 Eyebolt Kit
    • Finish: Black DuraFlex finish
    • Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent foam
    • Input Connectors: Neutrik Speakon NL-4 (x2)
    • Dimensions (H x W x D): 13.75 in x 23.5 in x 15.0 in
    • Net Weight: 48 lb
    Quick View
  • 0 out of 5

    QSC E110 Passive Speaker

    46,999.00

    A Multipurpose Speaker with Ample Coverage

    The QSC E110 PA speaker delivers top-tier sound reproduction. This trapezoidal, two-way speaker comes loaded with a 10-inch die-cast aluminum frame woofer and delivers abundant bass, thanks to frequency-shading topology. Interference is a non-issue, due to a well-tuned HF crossover transition. It will provide your entire audience with ample coverage via a 85-degree DMT waveguide and 1.75-inch compression driver. And if you use it as a wedge monitor, the E110 is angled up at a 55-degree angle, allowing it to be placed near the performer onstage. If you need a high-powered multipurpose speaker, the QSC E110 fits the bill.

    The E Series is built for performance

    Robust construction. Trusted reliability. Top-notch sonic performance. That’s what you get with QSC’s E Series. These speakers exhibit impressive power and epic low-end performance. These speakers power through live performances, DJ and dance music, karaoke, and other demanding events with ease. E Series loudspeakers pair well with QSC’s GXD and PLD power amplifiers. And you can match them with a TouchMix digital mixer and benefit from onboard DSP and factory-tuned presets.

    QSC products deliver power, reliability, and portability

    QSC’s PA loudspeakers, power amplifiers, and digital mixers bring live sound into the modern age. For over 40 years, QSC has been producing leading-edge sound products that meet even the most demanding standards. We are proud to offer a full lineup of QSC’s active PA speakers, passive PA speakers, ultra-efficient power amps, and advanced TouchMix mixers. Built to satisfy any live sound setup, QSC products deliver the perfect combination of power, reliability, and lightweight, compact portability.

    QSC E110 Features:

    • Trapezoidal, 2-way speaker with 10″ die-cast aluminum frame woofer
    • Frequency-shading topology delivers abundant bass
    • Well-tuned HF crossover transition eliminates interference
    • 85-degree DMT waveguide and 1.75″ compression driver offer excellent coverage
    • Pairs well with GXD and PLD power amplifiers
    • Suitable for main PA and stage monitor use
    • Match with a TouchMix digital mixer to benefit from onboard DSP and factory-tuned presets
    • Rugged tour-grade textured finish and perforated steel grill

    Tech Specs

    • Powered:No
    • Power Configuration:2-way
    • LF Driver Size:1 x 10″ die-cast aluminum woofer with 2.5″ voice-coil
    • HF Driver Size:1 x 1″ HF compression driver, 1.75″ voice-coil
    • Impedance:8 ohms
    • Power Rating:300W Continuous
    • Inputs:2 x speakON (NL4), 1 x barrier strip
    • Total Power:1200W Peak
    • Frequency Range:50Hz-20kHz (-10 dB)
    • Frequency Response:68Hz-20kHz (-6 dB)
    • Crossover Frequency:1.8kHz, full-range only
    • Horizontal Coverage Angle:85 Degrees (conical DMT)
    • Maximum Peak SPL:126 dB SPL @ 1m
    • Enclosure Material:Plywood with black texture paint finish
    • Mounting Options:Pole Mount with 1.37″ socket, Floor Wedge, 4 x M8 Fly Points
    • Height:22″
    • Width:13″
    • Depth:13″
    • Weight:44 lbs.
    • Manufacturer Part Number:E110
    Quick View
  • 0 out of 5

    QSC E112 Passive Speaker

    53,999.00

    A Multipurpose Speaker with Ample Coverage

    The QSC E112 PA speaker delivers top-tier sound reproduction. This trapezoidal, two-way speaker comes loaded with a 12-inch die-cast aluminum frame woofer and delivers abundant bass, thanks to frequency-shading topology. Interference is a non-issue, due to a well-tuned HF crossover transition. It will provide your entire audience with ample coverage via a 85-degree DMT waveguide and 1.75-inch compression driver. If you need a high-powered multipurpose speaker, the QSC E112 fits the bill.

    The E Series is built for performance

    Robust construction. Trusted reliability. Top-notch sonic performance. That’s what you get with QSC’s E Series. These speakers exhibit impressive power and epic low-end performance. These speakers power through live performances, DJ and dance music, karaoke, and other demanding events with ease. E Series loudspeakers pair well with QSC’s GXD and PLD power amplifiers. And you can match them with a TouchMix digital mixer and benefit from onboard DSP and factory-tuned presets.

    QSC products deliver power, reliability, and portability

    QSC’s PA loudspeakers, power amplifiers, and digital mixers bring live sound into the modern age. For over 40 years, QSC has been producing leading-edge sound products that meet even the most demanding standards. We are proud to offer a full lineup of QSC’s active PA speakers, passive PA speakers, ultra-efficient power amps, and advanced TouchMix mixers. Built to satisfy any live sound setup, QSC products deliver the perfect combination of power, reliability, and lightweight, compact portability.

    QSC E112 Features:

    • Trapezoidal, 2-way speaker with 12″ die-cast aluminum frame woofer
    • Frequency-shading topology delivers abundant bass
    • Well-tuned HF crossover transition eliminates interference
    • 85-degree DMT waveguide and 1.75″ compression driver offer excellent coverage
    • Pairs well with GXD and PLD power amplifiers
    • Match with a TouchMix digital mixer to benefit from onboard DSP and factory-tuned presets
    • Rugged tour-grade textured finish and perforated steel grill

    Tech Specs

    • Powered:No
    • Power Configuration:2-way
    • LF Driver Size:1 x 12″ die-cast aluminum woofer
    • HF Driver Size:1″ compression driver
    • Impedance:8 ohms
    • Power Rating:400W Continuous
    • Inputs:2 x speakON, 1 x barrier strip
    • Total Power:1600W Peak
    • Frequency Range:46Hz-20kHz (-10dB)
    • Frequency Response:64Hz-20kHz (-6dB)
    • Crossover Frequency:1800Hz
    • Vertical Coverage Angle:85 Degrees
    • Maximum Peak SPL:128dB SPL @ 1m
    • Enclosure Material:Plywood
    • Mounting Options:Pole Mount with 1.37″ socket, Floor Wedge, 6 x M10 Fly Points
    • Height:24.2″
    • Width:14.2″
    • Depth:14.6″
    • Weight:57.5 lbs.
    • Manufacturer Part Number:E112

     

    Quick View
  • 0 out of 5

    QSC E115 Passive Speaker

    72,999.00

    A Multipurpose Speaker with Ample Coverage

    The QSC E115 PA speaker delivers top-tier sound reproduction. This trapezoidal, two-way speaker comes loaded with a 15-inch die-cast aluminum-frame woofer and delivers abundant bass, thanks to frequency-shading topology. Interference is a non-issue, due to a well-tuned HF crossover transition. It will provide your entire audience with ample coverage via a 75-degree DMT waveguide and 2.8-inch compression driver. If you need a high-powered multipurpose speaker, the QSC E115 fits the bill.

    The E Series is built for performance

    Robust construction. Trusted reliability. Top-notch sonic performance. That’s what you get with QSC’s E Series. These speakers exhibit impressive power and epic low-end performance. These speakers power through live performances, DJ and dance music, karaoke, and other demanding events with ease. E Series loudspeakers pair well with QSC’s GXD and PLD power amplifiers. And you can match them with a TouchMix digital mixer and benefit from onboard DSP and factory-tuned presets.

    QSC products deliver power, reliability, and portability

    QSC’s PA loudspeakers, power amplifiers, and digital mixers bring live sound into the modern age. For over 40 years, QSC has been producing leading-edge sound products that meet even the most demanding standards. We are proud to offer a full lineup of QSC’s active PA speakers, passive PA speakers, ultra-efficient power amps, and advanced TouchMix mixers. Built to satisfy any live sound setup, QSC products deliver the perfect combination of power, reliability, and lightweight, compact portability.

    QSC E115 Features:

    • Trapezoidal, 2-way speaker with 15″ die-cast aluminum frame woofer
    • Frequency-shading topology delivers abundant bass
    • Well-tuned HF crossover transition eliminates interference
    • 75-degree DMT waveguide and 2.8″ compression driver offer excellent coverage
    • Pairs well with GXD and PLD power amplifiers
    • Match with a TouchMix digital mixer to benefit from onboard DSP and factory-tuned presets
    • Rugged tour-grade textured finish and perforated steel grill

    Tech Specs

    • Powered:No
    • Power Configuration:2-way
    • LF Driver Size:1 x 15″ die-cast aluminum woofer
    • HF Driver Size:2.8″ compression driver
    • Impedance:8 ohms
    • Power Rating:500W Continuous
    • Inputs:2 x speakON, 1 x barrier strip
    • Total Power:2000W Peak
    • Frequency Range:55Hz-20khz (-6 dB)
    • Horizontal Coverage Angle:75 Degrees Conical DMT
    • Maximum Peak SPL:130dB SPL @ 1m
    • Enclosure Material:Plywood
    • Mounting Options:Pole Mount with 1.37″ socket, Floor Wedge, 6 x M10 Fly Points
    • Height:28.2″
    • Width:16.5″
    • Depth:17.5″
    • Weight:68 lbs.
    • Manufacturer Part Number:E115

     

    Quick View
  • 0 out of 5

    QSC E118SW Passive Subwoofer

    82,999.00

    A Multipurpose High-powered Subwoofer

    The QSC E118SW PA subwoofer delivers top-tier sound reproduction. This high-output sub comes loaded with an 18-inch die-cast aluminum frame woofer and delivers abundant bass, thanks to frequency-shading topology. The E118SW features a rugged plywood enclosure with a tour-grade textured paint finish, along with a foam-lined, perforated steel grill. Four side-mounted handles make for easy transportation, while an M20 threaded pole-mount socket makes installation a breeze. If you need a high-powered multipurpose subwoofer, the QSC E118SW fits the bill.

    The E Series is built for performance

    Robust construction. Trusted reliability. Top-notch sonic performance. That’s what you get with QSC’s E Series. These speakers exhibit impressive power and epic low-end performance. These speakers power through live performances, DJ and dance music, karaoke, and other demanding events with ease. E Series loudspeakers pair well with QSC’s GXD and PLD power amplifiers. And you can match them with a TouchMix digital mixer and benefit from onboard DSP and factory-tuned presets.

    QSC products deliver power, reliability, and portability

    QSC’s PA loudspeakers, power amplifiers, and digital mixers bring live sound into the modern age. For over 40 years, QSC has been producing leading-edge sound products that meet even the most demanding standards. We are proud to offer a full lineup of QSC’s active PA speakers, passive PA speakers, ultra-efficient power amps, and advanced TouchMix mixers. Built to satisfy any live sound setup, QSC products deliver the perfect combination of power, reliability, and lightweight, compact portability.

    QSC E118SW Features:

    • High-output subwoofer with 18″ die-cast aluminum frame woofer
    • Frequency-shading topology delivers abundant bass
    • Pairs well with GXD and PLD power amplifiers
    • Match with a TouchMix digital mixer to benefit from onboard DSP and factory-tuned presets
    • Rugged tour-grade textured finish and perforated steel grill
    • 4 side-mounted handles make for easy transportation
    • M20 threaded pole-mount socket makes installation a breeze (pole included)

    Tech Specs

    • Powered/Unpowered:Unpowered
    • LF Driver Size:1 x 18″ aluminum frame woofer
    • Impedance:4 ohms
    • Power Rating:800W Continuous
    • Inputs:2 x speakON
    • Total Power:3200W Peak
    • Other I/O:1 x barrier strip
    • Frequency Range:32Hz-230hz (-10 dB)
    • Frequency Response:37Hz-230Hz (±6 dB)
    • Maximum Peak SPL:133dB SPL @ 1m
    • Mounting Options:M20 threaded sockets (top, side) accept speaker pole
    • Enclosure Material:Plywood
    • Height:23.2″
    • Width:24.2″
    • Depth:23.8″
    • Weight:95 lbs.
    • Manufacturer Part Number:E118SW
    Quick View
  • 0 out of 5

    Yamaha CHR10 Passive Speaker

    A Versatile, Professional Speaker from Yamaha

    If you’re looking for tried and trusted speakers for permanent installation or for quick use around your venue, you can’t go wrong with the CHR Series from Yamaha. Here, we’ve found the CHR10 700W 10-inch Passive Speaker delivers professional performance at a price that won’t break the bank. The 1.4-inch HF driver and 10-inch LF woofer will submerge your space in high-powered output with minimal distortion and maximum musicality. Even at the back of the house, your audience will be treated to clear audio reproduction given the CHR10’s capability for high SPL. This versatile passive speaker features a rotatable HF horn, meaning installation is possible both horizontally and vertically. Not to mention, you can easily take advantage of dedicated processor settings when you use the CHR10 with Yamaha DSP-equipped amplifiers and other compatible signal processors.

    Smart, ultra-flexible design

    The CHR10 integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90-degree x 60-degree dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the CHR10’s constant directivity horn — its innovative design minimizes the roll-off that conventional horns often produce.

    Sophisticated DSP processing

    If you power the CHR10 with a Yamaha PX Series amplifier, you can take full advantage of its dedicated speaker processor tuning settings. Fine-tune output channels with equalization, and add limiting to protect your speakers from dangerous signal spikes. Dial in crossovers to integrate subwoofers and fill speakers. Use the built-in delay network to ensure phase coherency across all speakers in larger rigs. And all of these advanced features are easily accessible from the LCD display. Here, we find that a PX Series amplifier and a CHR10 speaker are a match made in heaven.

    Yamaha 700W 10-inch CHR Passive Speaker Features:

    • 2-way passive loudspeaker with 1.4-inch HF and 10-inch LFdrivers
    • 700W handling capabilities
    • 55Hz–20kHz frequency range with 122dB SPL
    • Rotatable horn for vertical or horizontal installation
    • 90° x 60° dispersion from a vertical position
    • Compatible with Yamaha PX Series amplifier processor tuning settings (amplifier sold separately)
    • Made from durable yet lightweight plywood housing for excellent acoustic performance
    • Mounts to the UB-DXRDHR10 U-bracket (sold separately) for fixed installation
    • 35mm pole socket for use with stands
    Quick View
  • 0 out of 5

    Yamaha CHR12M Passive Speaker

    High-impact Sound in a Compact Passive Speaker

    Live sound engineers in search of a professional-grade, passive floor monitor will be impressed with the black Yamaha CHR12M, a compact, passive, two-way coaxial floor monitor / loudspeaker that’s well suited for clubs, bars, and other live sound applications.

    The speaker utilizes a 12″ woofer and 1.75″ compression driver, which are arranged in a coaxial design to deliver precise, smooth phase and frequency response characteristics ideal for use in monitoring application. The monitor offers a frequency range of 61 Hz to 20 kHz at 123 dB SPL. There are NL4 connectors on each side, making it easy to chain monitors, thereby preventing messy cabling.

    The plywood enclosure is finished with a durable Polyurea coating. A standard 1.4″ pole socket is available on one side of the speaker, allowing it to be mounted on a speaker pole for side-fill monitoring or main FOH applications. Utilize processor tuning settings for a Yamaha DSP equipped amplifier or other compatible signal processors to maximize system performance.

     

    • The coaxial driver delivers precise, smooth phase and frequency response characteristics ideal for use in monitoring applications
    • Featuring a plywood cabinet that delivers a clear sound with minimal vibration
    • Compact, low profile, plywood enclosure with a polyurea coating for a robust, scratch-resistant surface
    • A pole socket for use on a stand
    • Yamaha DSP equipped amplifiers or other compatible signal processors have dedicated speaker processor tuning settings to maximize system performance
    Quick View
  • 0 out of 5

    Yamaha CHR15 Passive Speaker

    High-impact Sound in a Compact Passive Speaker

    Audio engineers, touring bands, and mobile DJs in search of a professional-grade passive loudspeaker will be impressed with the black Yamaha CHR15, a compact, passive two-way loudspeaker well suited for clubs, bars, and live music venues.

    The speaker utilizes a 15″ woofer and 1.4″ compression driver, which combine to offer a frequency range of 49 Hz to 20 kHz at 125 dB SPL. A pair of CHR15 provides plenty of volume to cover an audience of 300 patrons. The compression driver is mounted into a 90 x 60° horn and provides crystal clear highs in a broad coverage angle.

    The plywood enclosure is finished with a durable Polyurea coating. There are three M10 fly points; two on the top and a single pullback. A dual 1.4″ pole socket on the bottom allows the speaker to be mounted to a speaker pole at 0 or -7°, which provides a lot of flexibility in placement and can prevent the sound from bouncing off low ceilings. Utilize processor tuning settings for a Yamaha DSP equipped amplifier or other compatible signal processors to maximize system performance.

    • Plywood enclosure with a polyurea coating for a robust, scratch resistant surface that delivers a clear sound with minimal vibration
    • Compact size despite the 15″ LF driver that provides excellent low-frequency response
    • Dual-angle pole sockets offer both 0 or a -7° down tilt
    • Rigging points for use with eye bolts
    • Yamaha DSP equipped amplifiers or other compatible signal processors have dedicated speaker processor tuning settings to maximize system performance
    Quick View
  • 0 out of 5

    Yamaha CZR15 Passive Speakers

    Killer Sound, Top Performance, and Easy System Integration

    The Yamaha CZR15 offers superb clarity and best-in-class SPL performance. This 2-way bi-ampable PA speaker boasts 1,600-watt power handling, a 33Hz–20kHz frequency range, and can tackle any application you throw at it. Great-sounding, custom-designed transducers deliver vivid, soaring highs and rafter-shaking low end. As a passive PA speaker, the CZR15 integrates with any configuration, thanks to its rotatable horn. It can also operate effectively as a stage monitor. This speaker can take full advantage of processor tuning settings when used with a Yamaha PX Series amplifier. The CZR15 employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating.

    Custom-designed transducers

    The Yamaha CZR15 is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a die-cast aluminum frame. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful, yet lightweight, neodymium magnet to handle the chest-thumping low end that the CZR15 delivers. The CZR15 isn’t just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction — even at cranked volumes.

    Smart, ultra-flexible design

    The CZR15 integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90×50° dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the CZR15’s constant directivity horn — its innovative design minimizes the roll-off that conventional horns often produce.

    Sophisticated DSP processing

    If you power the CZR15 with a Yamaha PX Series amplifier, you can take full advantage of its dedicated speaker processor tuning settings. Fine-tune output channels with equalization, and add limiting to protect your speakers from dangerous signal spikes. Dial in crossovers to integrate subwoofers and fill speakers. Use the built-in delay network to ensure phase coherency across all speakers in larger rigs. And all of these advanced features are easily accessible from the LCD display. Here we find that a PX Series amplifier and CZR15 are a match made in heaven

    Yamaha CZR15 Features:

    • 2-way passive loudspeaker with 2″ HF and 15″ LF drivers
    • Boasts 1,600-watt power handling and bi-amp capabilities
    • 33Hz–20kHz frequency range with 129dB SPL
    • Great-sounding, custom-designed transducers
    • Rotatable horn allows vertical or horizontal mounting
    • 90×50° dispersion from a vertical position
    • Constant directivity horn supplies smooth, level coverage without roll-off
    • Compatible with Yamaha PX Series amplifier processor tuning settings (amplifier sold separately)
    • Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating

    Tech Specs

    • Powered:No
    • Power Configuration:2-way Passive/Bi-amped
    • LF Driver Size:15″ Woofer, 3″ Voice Coil with Neodymium Magnet
    • HF Driver Size:2″ HF Compression Driver
    • Impedance:8 ohms
    • Power Rating:800W Program
    • Total Power:1600W Peak
    • Inputs:2 x SpeakON (parallel)
    • Frequency Range:43Hz-20kHz (passive), 34Hz-20kHz (with DSP processing)
    • Crossover Frequency:2.0kHz
    • Horizontal Coverage Angle:90 Degrees
    • Maximum Peak SPL:129 dB SPL @ 1m
    • Vertical Coverage Angle:50 Degrees
    • Enclosure Material:Plywood Cabinet with Polyurea Coating
    • Mounting Options:Pole: 2 x 1.37″ (35mm); Fly: 12 x M10; Wedge
    • Height:30″ (with feet)
    • Width:17.7″
    • Depth:18.1″
    • Weight:47 lbs.
    • Manufacturer Part Number:CZR15
    Quick View
  • 0 out of 5

    Yamaha CZR12 Passive Speakers

    Killer Sound, Top Performance, and Easy System Integration

    The Yamaha CZR12 offers superb clarity and best-in-class SPL performance. This 2-way bi-ampable PA speaker boasts 1,600-watt power handling, a 38Hz-20kHz frequency range, and can tackle any application you throw at it. Great-sounding, custom-designed transducers deliver vivid, soaring highs and rafter-shaking low end. As a passive PA speaker, the CZR12 integrates with any configuration, thanks to its rotatable horn. It can also operate effectively as a stage monitor. This speaker can take full advantage of processor tuning settings when used with a Yamaha PX Series amplifier. The CZR12 employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating.

    Custom-designed transducers

    The Yamaha CZR12 is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a die-cast aluminum frame. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful, yet lightweight, neodymium magnet to handle the chest-thumping low end that the CZR12 delivers. The CZR12 isn’t just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction — even at cranked volumes.

    Smart, ultra-flexible design

    The CZR12 integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90×60° dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the CZR12’s constant directivity horn — its innovative design minimizes the roll-off that conventional horns often produce.

    Sophisticated DSP processing

    If you power the CZR12 with a Yamaha PX Series amplifier, you can take full advantage of its dedicated speaker processor tuning settings. Fine-tune output channels with equalization, and add limiting to protect your speakers from dangerous signal spikes. Dial in crossovers to integrate subwoofers and fill speakers. Use the built-in delay network to ensure phase coherency across all speakers in larger rigs. And all of these advanced features are easily accessible from the LCD display. Here, we find that a PX Series amplifier and CZR12 are a match made in heaven.

    Yamaha CZR12 Features:

    • 2-way passive loudspeaker with 2″ HF and 12″ LF drivers
    • Boasts 1,600-watt power handling and bi-amp capabilities
    • 38Hz-20kHz frequency range with 129dB SPL
    • Great-sounding, custom-designed transducers
    • Rotatable horn allows vertical or horizontal mounting
    • 90×60° dispersion from a vertical position
    • Constant directivity horn supplies smooth, level coverage without roll-off
    • Compatible with Yamaha PX Series amplifier processor tuning settings (amplifier sold separately)
    • Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating

    Tech Specs

    • Powered:No
    • Power Configuration:2-way Passive/Bi-amped
    • LF Driver Size:12″ Woofer, 3″ Voice Coil with Neodymium Magnet
    • HF Driver Size:2″ HF Compression Driver
    • Impedance:8 ohms
    • Power Rating:800W Program
    • Inputs:2 x SpeakON (parallel)
    • Total Power:1600W Peak
    • Frequency Range:43Hz-20kHz (passive), 42Hz-20kHz (with DSP processing)
    • Crossover Frequency:2.0kHz
    • Horizontal Coverage Angle:90 Degrees
    • Maximum Peak SPL:129 dB SPL @ 1m
    • Vertical Coverage Angle:60 Degrees
    • Enclosure Material:Plywood Cabinet with Polyurea Coating
    • Mounting Options:Pole: 2 x 1.37″ (35mm); Fly: 12 x M10; Wedge
    • Height:25.4″ (with feet)
    • Width:16.1″
    • Depth:15.5″
    • Weight:39.7 lbs.
    • Manufacturer Part Number:CZR12

     

    Quick View
  • 0 out of 5

    Yamaha CZR10 Passive Speakers

    Killer Sound, Top Performance, and Easy System Integration

    The Yamaha CZR10 offers superb clarity and best-in-class SPL performance. This 2-way bi-ampable PA speaker boasts 1,400-watt power handling, a 43Hz-20kHz frequency range, and can tackle any application you throw at it. Great-sounding, custom-designed transducers deliver vivid, soaring highs and rafter-shaking low end. As a passive PA speaker, the CZR10 integrates with any configuration, thanks to its rotatable horn. It can also operate effectively as a stage monitor. This speaker can take full advantage of processor tuning settings when used with a Yamaha PX Series amplifier. The CZR10 employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating.

    Custom-designed transducers

    The Yamaha CZR10 is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a die-cast aluminum frame. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful, yet lightweight, neodymium magnet to handle the chest-thumping low end that the CZR10 delivers. The CZR10 isn’t just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction — even at cranked volumes.

    Smart, ultra-flexible design

    The CZR10 integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90×60° dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the CZR10’s constant directivity horn — its innovative design minimizes the roll-off that conventional horns often produce.

    Sophisticated DSP processing

    If you power the CZR10 with a Yamaha PX Series amplifier, you can take full advantage of its dedicated speaker processor tuning settings. Fine-tune output channels with equalization, and add limiting to protect your speakers from dangerous signal spikes. Dial in crossovers to integrate subwoofers and fill speakers. Use the built-in delay network to ensure phase coherency across all speakers in larger rigs. And all of these advanced features are easily accessible from the LCD display. Here, we find that a PX Series amplifier and CZR10 are a match made in heaven.

    Yamaha CZR10 Features:

    • 2-way passive loudspeaker with 2″ HF and 10″ LF drivers
    • Boasts 1,400-watt power handling and bi-amp capabilities
    • 43Hz-20kHz frequency range with 127dB SPL
    • Great-sounding, custom-designed transducers
    • Rotatable horn allows vertical or horizontal mounting
    • 90×60° dispersion from a vertical position
    • Constant directivity horn supplies smooth, level coverage without roll-off
    • Compatible with Yamaha PX Series amplifier processor tuning settings (amplifier sold separately)
    • Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating

    Tech Specs

    • Powered:No
    • Power Configuration:2-way Passive/Bi-amped
    • LF Driver Size:10″ Woofer, 3″ Voice Coil with Neodymium Magnet
    • HF Driver Size:2″ HF Compression Driver
    • Impedance:8 ohms
    • Power Rating:700W Program
    • Total Power:1400W Peak
    • Inputs:2 x SpeakON (parallel)
    • Frequency Range:43Hz-20kHz (passive), 46Hz-20kHz (with DSP processing)
    • Crossover Frequency:2.5kHz
    • Horizontal Coverage Angle:90 Degrees
    • Maximum Peak SPL:127 dB SPL @ 1m
    • Vertical Coverage Angle:60 Degrees
    • Enclosure Material:Plywood Cabinet with Polyurea Coating
    • Mounting Options:Pole: 2 x 1.37″ (35mm); Fly: 8 x M10, 2 x M8; Wedge
    • Height:21.1″ (with feet)
    • Width:12.4″
    • Depth:13.6″
    • Weight:30.9 lbs.
    • Manufacturer Part Number:CZR10
    Quick View
  • 0 out of 5

    JBL STX825 Passive Speakers

    Dual 15″ Two-Way, Bass-Reflex

    JBL STX825 is a dual 15″ two-way passive speaker designed for maximum impact, portability and ease of use. With a wide frequency range and broad 90 degree by 50 degree coverage angles, this speaker is ideal for bands or DJ’s as their primary PA, use as a side-fill on a concert stage, or as an install speaker in a dance club or performance venue.
    FEATURES
    • Compact and very high-power.
    • Dual (15″) Vented Gap Cooling™ low-frequency drivers for very high acoustic output.
    • 102 mm (4 in) voice-coil neodymium compression driver for high-power capacity and very light-weight
    • 90°x 50° coverage.
    • Bi-amplified or full-range passive operation.
    • Twelve M10 suspension points may be used with optional M10 eyebolts.
    • Rugged DuraFlex™ coated enclosures sized to be truck pack friendly.
    • 14-Gauge steel grille lined with acoustically transparent cloth.
    Quick View
  • 0 out of 5

    JBL STX828S Passive Subwoofer

    Dual 18″ Bass Reflex Subwoofer

    JBL STX828S is a dual 18″ high power subwoofer system in a front-loaded, vented enclosure designed for maximum low-frequency performance. The STX828 has an optional wheel kit. Two drivers give 2,000 watts of continuous pink noise power handling, 4kW program and 8 kW peak.
    FEATURES
    • Dual 18 in. Super Vented Gap™ woofers for extended low frequency output.
    • Rugged DuraFlex™ coated enclosures sized to be truck pack friendly.
    • 14-Gauge steel grille lined with acoustically transparent cloth.
    Quick View
  • 0 out of 5

    Behringer Eurolive VP1520 Passive Speakers

    The EUROLIVE VP1520 loudspeaker is exactly what you’ve come to expect from BEHRINGER – 1000-Watt power handling capacity, more features and absolutely more affordable! And thanks to the extremely powerful, long-excursion 15″ Low-Frequency (LF) driver and state-of-the-art 1.75″ titanium-diaphragm High-Frequency (HF) compression driver – the VP1520 arrives ready to push it to the limit right out of the box. The VP1520 is destined to become a legend in its own right, alongside the other EUROLIVE models that have made BEHRINGER the world leader in loudspeakers.

    Our LF and HF transducers are designed specifically for each application – it’s what sets us apart from the competition. When you buy a BEHRINGER loudspeaker, you can rest assured that the transducers inside have been engineered to perform flawlessly in conjunction with every other element for truly professional results. The EUROLIVE VP1520 cranks out massive quantities of low end, with articulate, detailed mids and crystal-clear highs.

     

    Quick View
  • 0 out of 5

    JBL SRX815 Passive Speakers

    The JBL Professional SRX815 Passive – 15″ Two-Way Bass Reflex Passive System is designed for use as a light-duty main PA, monitor, or rear or side fill. Featuring M10 suspension points and feet for both floor standing and monitor use, the speaker is suitable for musicians, bands, and DJs, concert use, public speaking, or installations such as performance venues, corporate spaces, educational facilities or houses of worship. Tunings and presets are available for Crown ITech HD and XTI 2 amps as well as dbx VENU360 signal processor.

    Transducer Technology

    Includes JBL’s patented Differential Drive technology using lower-mass ferrite drivers for reduced weight with 3″ voice coils

    Key Features

    • JBL 15″ Woofer
    • Tunings for Crown Amps and dbx Venu360
    • 3200W Peak, 1600W Program Power Handling
    • 56 Hz to 20 kHz Frequency Response
    Quick View
X