Wired Microphones

Showing 65–80 of 158 results

  • 0 out of 5

    Shure MX418/S Gooseneck Microphone

    25,204.00

    18″ Supercardioid Gooseneck Mic

    The MX418/S from Shure is an 18” Microflex Gooseneck Condenser Microphone with supercardioid polar pattern. It features an attached XLR preamp, shock and flange mount, and snap-fit foam windscreen. Shure Microflex® Standard Gooseneck microphones bring a whole new meaning to the word flexible with a fully adjustable gooseneck. Designed for easy replacement and available in cardioid, supercardioid and omnidirectional polar patterns, the interchangeable cartridges offer wide frequency response and accurate sound reproduction for a wide variety of applications, such as houses of worship, courtrooms and conference centers. Plus, the condenser cartridges fit every model in the Microflex product line for enhanced convenience and consistent sound.

    Includes

    • Flange
    • Retainer
    • Isolation Ring
    • Snap-fit foam windscreen
    • Shock Mount
    • Hex Wrench #4

    Features

    • 18″, fully adjustable gooseneck
    • Supercardioid polar pattern
    • Interchangeable condenser cartridges (sold separately)
    • Wide dynamic range and frequency response
    • Includes attached XLR preamp, shock & flange mount, snap-fit windscreen, and mute switch

    Specifications

    • Frequency Response: 50Hz – 17 kHz
    • Polar Pattern: Supercardioid
    • Output Impedance (at 1000 Hz): Rated at 150 ohms (180 ohms actual)
    • Open Circuit Sensitivity (at 1 kHz, ref. 1V/Pa): -33.5 dB (21.1 mV)
    • Maximum SPL (1 kHz at 1% THD, 1 kohm load): 122.7 dB
    • Equivalent Output Noise (A-weighted): 26.5 dB SPL
    • Signal to Noise Ratio (referenced at 94 dB SPL): 67.5 dB
    • Dynamic Range at 1 kohm Load: 96.2 dB
    • Common Mode Rejection: 45.0 dB minimum
    • Mute Switch Attenuation (switched models only): 50.0 dB minimum
    • Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V)
    • Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
    • Power Requirements: 11 to 52 Vdc phantom, 2.0 mA
    • Environmental Requirements:
      • Operating Temperature Range: –18° C to 57° C (0° F to 135° F)
      • Relative Humidity: 0 to 95%
    Quick View
  • 0 out of 5

    Shure MX418D/S Gooseneck Microphone

    32,762.00

    Desktop Microphone for Meetings and More!

    Equip your desktop or podium with sheer Shure convenience! The MX418D/S is a handy gooseneck microphone with an 18″-long reach. The tight supercardioid pickup pattern helps it stay focused on the speaker’s voice – and only the speaker’s voice, so you won’t have problems with it picking up a bunch of other instruments around the room or stage. The MX418D/S also sounds fantastic, thank to its wide frequency response for extreme accuracy and natural sound.

    If you’re working in a space where there are a number of cell phones and wireless devices (and where isn’t that, these days?), you’ll appreciate Shure’s attention to detail – they added professional Commshield Technology to help guard against unwanted interference. That makes the MX418D/S perfect for churches, courtrooms, conference centers, and more.

    A desktop base is included. There are also high-tech Logic input and output terminals, so you can use a remote control or pair the MX418D/S with an automatic microphone mixer. A snap-fit foam windscreen for outdoor use is also included.

    Shure MX418D/S 18″ Desktop Gooseneck Condenser Microphone Features at a Glance:

    • 18″ desktop gooseneck condenser microphone
    • Desktop base with 10′ cable
    • Logic input and output
    • Programmable switch
    • LED indicator
    • Snap-fit foam windscreen included

    Tech Specs

    • Microphone Type:Condenser
    • Polar Pattern:Supercardioid
    • Frequency Response:50Hz-17kHz
    • Max SPL:122dB
    • Output Impedance:180 ohms
    • Signal to Noise Ratio:66dB
    • Self Noise:28dB
    • Connector:XLR
    • Gooseneck Length:18″
    • Weight:1.8 lbs.
    • Included Accessories:Desktop Base, 10′ Cable
    • Manufacturer Part Number:MX418D/S
    Quick View
  • 0 out of 5

    Shure MX424/C Gooseneck Microphone

    22,999.00

    In Tune with Speech.No Installation Headaches

    The Shure MX424/C is a 24″ gooseneck condenser microphone designed for panels, conferences, and public-address applications and engineered to deliver accurate and detailed voice reproduction for demanding professionals. The longer adjustable gooseneck length allows for optimal positioning for a wide variety of speakers and presenters and is well suited mounting on deep tables and large surfaces.

    At home on conference tables, pulpits, or lecterns, the mic features an electret-condenser capsule with a 50 Hz to 17 kHz frequency response that’s tailored for crisp, clear speech and vocals. The Microflex series’ modular design allows you to easily swap out mic capsules depending on the application and the acoustic properties of the environment. This version includes a capsule with a cardioid pick-up pattern that focuses audio capture on the subject in front of the mic for less background noise and fewer feedback problems from PA systems and loudspeakers.

    The supplied snap-fit windscreen clicks into place on the mic to ensure secure attachment and helps reduce plosives and breath noise by up to 30 dB for clearer, more intelligible audio. The included shockmount installation flange provides over 20 dB of isolation from surface vibration noise. Additional hardware is provided for quick and easy mounting to surfaces.

    In Tune with Speech

    • Microflex microphone cartridges are tailored specifically to capture the human voice, so the presenter always comes through clearly
    • Wide dynamic range and frequency response provide accurate sound reproduction
    • Interchangeable cartridges provide an optimal polar pattern choice for each application
    • Shure Commshield filtering is built into Microflex to reject RF interference from ever-present smartphones, keeping the focus on the performance.
    • Snap-fit foam windscreen securely attaches to mic and reduces breath noise or plosives

    No Installation Headaches

    • Shockmount provides over 20 dB of isolation from surface vibration noise
    • Included mounting accessories make the MX424 easy to install on a table, podium, or lectern in any space
    • Surface-mount preamp with XLR connector for use with standard, or a wide variety of, audio mixers and PA systems
    • Requires 11 to 52V phantom power for operation
    Quick View
  • 0 out of 5

    Shure Nexadyne 8/C Dynamic Vocal Microphone

    Breakthrough Dual-engine Capture Clarity

    As the industry’s pacesetting standard in contemporary microphone manufacturing, Shure has once again proven its dedicated audio prowess with the Nexadyne 8/C dynamic vocal microphone. Equipped with a standard cardioid pickup pattern and the company’s revolutionary Revonic dual-engine transducer design, the Nexadyne 8/C boasts improved clarity and projection while sporting enhanced acoustic signal performance for superb use in presentations, touring performances, house of worship environments, and much more. High resistance to feedback and audial disturbances makes the Nexadyne 8/C incredibly easy to use, ensuring confident use and build-quality that lasts throughout countless performances. Likewise, the microphone’s dent-resistant grille keeps internals free from physical damage. It features an included microphone clip stand adapter and protective zipper case, ensuring immediate vocal execution that’s ready to hit any studio or stage setting in seconds. Plain and securing one for yourself will ensure years of ultra-clear, undoubted vocal performance.

    Groundbreaking dual-engine transducer design

    The Nexadyne microphone’s onboard Revonic dual-engine transducer technology marks the next generation in contemporary microphone design, supplying clean, vivid vocal clarity in a number of presentation and on-stage performance scenarios. By utilizing both of the mics transducers out of phase, the microphone isolates mechanical vibrations, effectively isolating self-noise interferences for an ultra-clear signal. Likewise, the capsule’s acoustic signal optimization supplies stronger response with little to no ambient disturbances, resulting in less EQ corrections to pave the way to your desired final mix. From professional touring situations to presentation scenarios and everywhere in between, the Nexadyne microphone’s breakthrough audial design has greatly impressed  contingent of live sound engineers.

    Shure Nexadyne 8/C Dynamic Vocal Microphone Features:

    • Cardioid dynamic vocal microphone equipped with revolutionary Shure audio improvements
    • An exceptional choice for vocal performances, presentations, houses of worship, and more
    • Cardioid pickup pattern with vibration cancellation ensures clear vocal capture with little to no ambient disturbance
    • Out-of-the-box acoustic signal processing for immediate professional use
    • Onboard Shure Revonic dual-engine transducer technology sports modernized vocal clarity and high-end response — reduces typical EQ mix requirements
    • Dent-resistant grille ensures long-lasting, reliable use throughout several practice and performance sessions
    • Includes mic clip stand adapter and protective zipper case for versatile travel use

    Tech Specs

    • Microphone Type:Dynamic
    • Polar Pattern:Cardioid
    • Manufacturer Part Number:NXN8/C
    Quick View
  • 0 out of 5

    Shure Nexadyne 8/S Dynamic Vocal Microphone

    Vocal-focused, Dual-engine Microphone Dynamics

    As the industry’s pacesetting standard in contemporary microphone manufacturing, Shure has once again proven its dedicated audio prowess with the Nexadyne 8/S dynamic vocal microphone — a dialed-in, vocally optimized sibling of the cardioid Nexadyne mic. Equipped with a supercardioid pickup pattern and the company’s revolutionary Revonic dual-engine transducer design, the Nexadyne 8/S is a bastion of focused vocal capture, ensuring detailed sound performance with minimal intrusion from unwanted sound sources — proving an exceptional handheld option in performance theaters, presentation settings, houses of worship, and much more. High resistance to feedback and audial disturbances makes the Nexadyne 8/S incredibly easy to use, ensuring confident use and build quality that lasts throughout countless performances. Likewise, the microphone’s dent-resistant grille keeps internals free from physical damage. It features an included microphone clip stand adapter and protective zipper case, ensuring immediate vocal execution that’s ready to hit any studio or stage setting in seconds. Plain and securing one for yourself will ensure years of ultra-clear, undoubted vocal performance.

    Groundbreaking dual-engine transducer design

    The Nexadyne microphone’s onboard Revonic dual-engine transducer technology marks the next generation in contemporary microphone design, supplying clean, vivid vocal clarity in a number of presentation and on-stage performance scenarios. By utilizing both of the mics transducers out of phase, the microphone isolates mechanical vibrations, effectively isolating self-noise interferences for an ultra-clear signal. Likewise, the capsule’s acoustic signal optimization supplies stronger response with little to no ambient disturbances, resulting in less EQ corrections to pave the way to your desired final mix. From professional touring situations to presentation scenarios and everywhere in between, the Nexadyne microphone’s breakthrough audial design has greatly impressed contingent of live sound engineers.

    Shure Nexadyne 8/S Dynamic Vocal Microphone Features:

    • Supercardioid dynamic vocal microphone equipped with revolutionary Shure audio improvements
    • An exceptional choice for vocal performances, presentations, houses of worship, and more
    • Supercardioid pickup pattern with vibration cancellation ensures clean, dialed-in vocal capture with minimal sound interruptions
    • Out-of-the-box acoustic signal processing for immediate professional use
    • Onboard Shure Revonic dual-engine transducer technology sports modernized vocal clarity and high-end response — reduces typical EQ mix requirements
    • Dent-resistant grille ensures long-lasting, reliable use throughout several practice and performance sessions
    • Includes mic clip stand adapter and protective zipper case for versatile travel use

    Tech Specs

    • Microphone Type:Dynamic
    • Polar Pattern:Cardioid
    • Manufacturer Part Number:NXN8/S
    Quick View
  • 0 out of 5

    Shure PGA57-LC Instrument Microphone

    6,056.00

    Mic Up Your Amps with Shure

    Capture the intensity of amplifiers, snare drums and more with the Shure PGA57 dynamic microphone. Like the legendary Shure mic it’s descended from, the PGA57 serves up consistent results with powerful, harmonically-rich sound sources like guitar amps and snare drums. The cardioid pickup pattern helps you capture more of the sound you want, and less of the sound of the room that you’re in. Recording engineers know that you need versatile solutions when you don’t have a lot of microphones in your collection, and the Shure PGA57 dynamic microphone is an affordable solution for amps, drums and more.

    Shure PGA57 Dynamic Microphone Features at a Glance:

    • Dynamic mic optimized for guitar amplifiers and drums
    • Ideal for harmonically rich, high SPL sound sources
    • Built to last

    Get a great amplifier mic at a great value with the Shure PGA57!

    Tech Specs

    • Microphone Type:Dynamic
    • Polar Pattern:Cardioid
    • Frequency Response:50Hz-15kHz
    • Output Impedance:150 ohms
    • Color:Black
    • Connector:XLR
    • Weight:0.62 lbs.
    • Manufacturer Part Number:PGA57-LC

     

    Quick View
  • 0 out of 5

    Shure PGADRUMKIT6 Drum Microphone Kit

    40,499.00

    The Shure PGADRUMKIT6 is a professional-grade drum microphone kit designed for capturing the sound of a drum set. It includes a selection of microphones optimized for different parts of the drum kit, ensuring high-quality audio capture for both live performances and studio recordings. Here are the components typically included in the PGADRUMKIT6:

    1. PGA52 (1) – Kick Drum Microphone:
      • Tailored frequency response for low-frequency performance.
      • Dynamic microphone with a cardioid polar pattern, which helps to isolate the sound source and reduce background noise.
    2. PGA56 (3) – Snare/Tom Microphones:
      • Compact, drum-mountable design.
      • Dynamic microphones with a cardioid polar pattern, ideal for close-miking snare and tom drums.
    3. PGA57 (1) – Instrument Microphone:
      • Versatile microphone for snare drums and other instruments.
      • Dynamic microphone with a cardioid polar pattern, similar to the SM57, but part of the PGA series.
    4. PGA81 (1) – Overhead Microphone:
      • Condenser microphone with a cardioid polar pattern.
      • Suitable for capturing cymbals and overall drum kit sound from above.

    The kit also includes:

    • Drum mounts for attaching microphones to drum rims.
    • XLR cables for each microphone.
    • A carrying case for convenient transport and storage.

    Key Features:

    • Durability: Shure microphones are known for their rugged construction, making them reliable for both touring and studio use.
    • Sound Quality: Each microphone in the kit is tailored for specific drum kit components, ensuring accurate sound reproduction.
    • Ease of Use: The included drum mounts and cables make setup straightforward, and the carrying case helps keep everything organized.

    Applications:

    • Live Performances: Suitable for use in concerts and live shows where high-quality drum sound capture is essential.
    • Studio Recording: Ideal for recording drum tracks in professional and home studios.
    • Broadcasting: Can be used in broadcast settings where drum kit miking is required.

    Overall, the Shure PGADRUMKIT6 is a comprehensive solution for drummers and audio engineers looking for a reliable and high-quality drum microphone kit.

    Quick View
  • 0 out of 5

    Shure PGADRUMKIT7 Drum Microphone Kit

    48,099.00

    The Shure PGADRUMKIT7 is a professional drum microphone kit designed to capture the full sound of a drum set. Here’s a breakdown of what the kit includes and some key features:

    Contents of the PGADRUMKIT7:

    1. 1 x PGA52 – Kick drum microphone.
    2. 3 x PGA56 – Snare/tom microphones.
    3. 1 x PGA57 – Instrument microphone (typically for snare).
    4. 2 x PGA81 – Condenser microphones for overheads.
    5. 7 x Drum Mounts – For attaching the microphones to drum hardware.
    6. 1 x Zippered carrying case – For storage and transport.
    7. XLR-XLR cables – To connect microphones to a mixing console or recording device.

    Key Features:

    • Durability: Shure microphones are known for their rugged construction, making them suitable for both studio and live performance environments.
    • Tailored Frequency Response: Each microphone is designed with a frequency response suited to its specific application, ensuring optimal sound capture.
    • Versatility: The kit provides a comprehensive solution for miking a full drum set, offering a range of microphones for different drums and cymbals.
    • Ease of Use: The included drum mounts and cables facilitate quick and easy setup.

    Specific Microphone Features:

    • PGA52: Tailored for low-frequency sound sources, such as kick drums. It has a cardioid polar pattern for isolation and feedback rejection.
    • PGA56: Designed for snare and tom drums, offering a flexible gooseneck design for easy positioning.
    • PGA57: Ideal for capturing the sound of snares and other percussion instruments, with a cardioid polar pattern for focused sound.
    • PGA81: Condenser microphones that are excellent for capturing the nuances of cymbals and overall drum kit ambiance.

    Applications:

    • Live Performances: Durable and reliable, making them suitable for the rigors of live shows.
    • Studio Recording: High-quality sound capture makes this kit a good choice for studio use as well.

    Overall, the Shure PGADRUMKIT7 provides a versatile, reliable, and high-quality solution for miking a drum set, suitable for both live and studio environments.

     

    Quick View
  • 0 out of 5

    Shure RK412WS Windscreens

    3,160.00

    Snap-fit windscreen securely fastens to Microflex gooseneck microphones to reduce unwanted breath and wind noise. Four (4) windscreens included.

    Quick View
  • 0 out of 5

    Shure SM35-XLR Headworn Microphone

    18,000.00

    This Shure Headset Mic is a Reliable Performer

    The Shure SM35-XLR is a headset microphone designed for live performances, public speaking, and other applications where hands-free operation is required. It features a cardioid condenser microphone element that provides excellent sound quality and feedback rejection.

    The SM35-XLR is designed to be worn comfortably on the head, with an adjustable wireframe headband and a flexible gooseneck boom for precise positioning of the microphone element. It has a detachable cable terminated with an XLR connector, which allows for easy connectivity to a wide range of audio equipment such as mixers, amplifiers, and audio interfaces.

    One of the key features of the SM35-XLR is its ability to handle high sound pressure levels (SPL), making it suitable for loud environments and instruments such as drums or brass. It also offers a wide frequency response range, capturing the full range of vocals and instruments accurately.

    The microphone is equipped with an integrated windscreen that helps reduce wind noise and plosives, ensuring clear and intelligible audio. It also has a cardioid pickup pattern, which focuses on capturing sound from the front while rejecting unwanted noise from the sides and rear, minimizing feedback issues.

    Overall, the Shure SM35-XLR is a reliable and versatile headset microphone that delivers professional audio performance and hands-free convenience for various live sound applications.

    Quick View
  • 0 out of 5

    Shure SM58S Dynamic Vocal Microphone

    15,125.00

    The World’s Most Popular Live Vocal Mic!

    Shure’s legendary SM58 dynamic vocal microphone is tuned to accentuate the warmth and clarity of lead and back-up vocals — and it’s consistently the first choice of performers around the globe. The SM58 also features a highly effective built-in, spherical filter, which minimizes wind and breath “pop” noise, while its cardioid pickup pattern helps to isolate the main sound source, while minimizing unwanted background noise. Outdoors or indoors, singing or speech — the SM58 is the overwhelming choice of professionals. This is the SM58S, which adds an on/off switch.

    Quick View
  • 0 out of 5

    Shure SM7DB Dynamic Vocal Microphone with Active Preamp

    The Prized SM7B Gets a Major Upgrade

    The Shure SM7B is a legendary vocal microphone used and held in regard by musicians, podcasters, broadcasters, and streamers worldwide. That said, the SM7B possesses a notoriously low output, requiring users to utilize an in-line booster to get a usable level out of the mic. The Shure SM7dB is here to offer you a more elegant solution. This dynamic microphone serves up the tried-and-true SM7B sound; however, thanks to its built-in active preamp, you get output levels suitable for any recording setup or application — no separate booster required. You can bypass the built-in preamp if you want to replicate the original SM7B’s performance, and the SM7dB includes its predecessor’s oft-used bass roll-off and presence boost controls. To top it off, the Shure SM7dB boasts the SM7B’s iconic look, ensuring that you can benefit from the cache that goes along with owning an industry-standard microphone.

    Built-in active preamp

    As mighty as the original SM7B sounds, many studio professionals argue its output leaves a bit to be desired. Thus, it’s standard practice within professional circles to pair the SM7B with an in-line booster to ensure a solid, healthy output signal. The Shure SM7dB offers you the perfect solution by pairing an SM7B with a built-in active preamp. The SM7dB’s preamp gives you the choice of +18dB or +28dB of gain, and if you want classic SM7B operation, you can bypass the preamp altogether. You can deploy the SM7dB anywhere you’d use its predecessor — with identical results — but you can leave your in-line booster at home.

    True dynamic versatility

    The Shure SM7dB includes the same dual-tone controls as its preamp-less predecessor. This dual-band switchable passive EQ offers low-cut and presence boost controls. Flat or with the low cut, the SM7dB is an amazing mic for male dialog and vocals, but the presence boost makes it an excellent choice for bright sound sources and sibilant vocalists.

    Superior design for superior results

    Like its vaunted predecessor, the SM7dB delivers top-shelf results. For starters, there’s an internal suspension and shockmounting system, which eliminates light vibration. Advanced electromagnetic shielding keeps out hum. Top it off with Favorite features such as an integrated swivel mount and a robust close-talk windscreen, and this mic has a whole lot to offer. And since it features a cardioid polar pattern, off-axis sound is never an issue for your Shure SM7dB.

    Shure SM7dB Active Dynamic Microphone Features:

    • Pairs a Shure SM7B dynamic microphone with a built-in active preamp
    • Negates the need for a separate microphone and in-line booster
    • Bass roll-off and midrange emphasis (presence boost) controls accommodate a wide range of voices
    • Shielded against electromagnetic hum and broadband interference
    • Internal air suspension shock isolation virtually eliminates mechanical noise transmission
    • Effective pop filter eliminates the need for any add-on protection against explosive breath sounds
    • Ships with RK345B detachable close-talk windscreen
    • Yoke mounting with captive stand nut for easy mounting and dismounting
    • Classic cardioid polar pattern provides excellent off-axis rejection
    • Rugged construction for a lifetime of regular wear and tear
    • Boasts the same iconic look as the original SM7B

    Tech Specs

    • Microphone Type:Active Dynamic
    • Polar Pattern:Cardioid
    • Frequency Response:50Hz-20kHz
    • Output Impedance:150 ohms
    • Sensitivity:-31dB, -41dB, -59dBV/Pa
    • Low Cut Filter:Bass Roll-off
    • Features:18/28dB Boost, Preamp Bypass Switch, Presence Boost
    • Color:Black
    • Connector:XLR
    • Power Source:48V Phantom Power
    • Weight:1.87 lbs
    • Included Accessories:RK345B Windscreen
    • Manufacturer Part Number:SM7db

     

    Quick View
  • 0 out of 5

    Shure SM86 Cardioid Condenser Vocal Microphone

    16,999.00

    Studio-quality Live Vocal Microphone

    Following in the footsteps of the SM58 and SM57, the Shure SM86 has everything the SM line of Shure microphones has stood for all these years — durability, quality performance, and reliability. Tailor-made for vocals, this handheld condenser brings studio quality to your live performances. It exhibits a crystal-clear sound that coats your voice in a sublime sheen, while its cardioid polar pattern ensures maximum isolation. You also get a built-in 3-point shockmount to minimize handling noise, while an integrated 2-stage pop filter stops plosives in their tracks. The SM86 includes a mic clip and carrying pouch.

    Extremely rugged condenser mic for studio quality onstage

    If you’ve spent any time in a recording studio you’ve probably experienced the benefits of a good condenser mic — great transients, balanced frequency response, and wide dynamic range. The Shure SM86 packs those qualities into a rugged steel case to give you condenser quality in a handheld stage mic. The phantom-powered SM86 operates on voltages ranging from 11 to 52 volts DC so it can be used even with inexpensive mixers. It also works well in studio environments, which makes it a comfortable choice for vocalists who both perform live and record.

    Tailored frequency response optimized for vocals

    The Shure SM86 makes a great vocal mic. Its frequency response of 50Hz–18kHz includes a presence peak in the 2–5kHz range that ensures clarity and projection for all vocal ranges. Plus, the SM86 works well with vocalists who like to work both close to the mic and up to 18 inches away, delivering a robust sound and bass response that smoothly moves from enhanced and powerful up close to smooth and even farther away. Here , we appreciate the polish that the SM86 imparts — it’s an easy way to elevate your live vocal performances.

    Internal shockmount and pop filter reduce handling noise

    The SM86’s cardioid pickup pattern means it admirably rejects off-axis noise, reducing bleed from other onstage sound sources. Shure designed it with a built-in 3-point shockmount that minimizes handling noise, and a 2-stage pop filter to reduce wind and plosives. The SM86 is an excellent selection for use with both stage monitors and personal in-ear monitors.

    Shure SM86 Handheld Condenser Microphone Features:

    • Condenser cartridge for studio-quality sound
    • Tailored frequency response for clear reproduction of vocals
    • Rugged construction withstands the rigors of touring sound
    • Cardioid polar pattern minimizes unwanted background noise
    • Excellent choice for stage monitors and personal in-ear monitors
    • Built-in 3-point shockmount minimizes handling noise
    • 2-stage pop filter reduces wind and breath noise
    • Includes a vinyl storage pouch and clip

    Tech Specs

    • Microphone Type:Condenser
    • Polar Pattern:Cardioid
    • Frequency Response:50Hz-18kHz
    • Max SPL:147dB SPL
    • Output Impedance:150 ohms
    • Signal to Noise Ratio:71dB
    • Self Noise:23dB
    • Color:Dark Grey
    • Power Source:48V phantom power
    • Connector:XLR
    • Dimensions:7.2″ x 1.92″
    • Weight:0.61 lbs.
    • Included Accessories:Stand Clamp, Microphone Pouch
    • Manufacturer Part Number:SM86

     

    Quick View
  • 0 out of 5

    Shure VP83 LensHopper Camera-Mount Condenser Microphone

    25,204.00

    A Superb Camera-mount Shotgun Mic

    Does stunning high-definition video with flat-sounding audio describe your projects? If so,videographers recommend planting a Shure VP83 LensHopper on top of your DSLR camera or HD camcorder. This shotgun mic’s electret condenser cartridge captures detailed, superb-sounding audio and features a supercardioid/lobar polar pattern for superior off-axis noise rejection. Enjoy high-level protection against unwanted noise, thanks to an integrated Rycote Lyre shockmount, and eliminate the remaining background rumble with a built-in highpass filter. A three-position gain switch accommodates different recording environments, while an all-metal construction ensures long-lasting durability.

    Shure VP83 LensHopper Includes:

    • VP83 camera-mount condenser microphone
    • Battery
    • Integrated cable
    • Shoe mount
    • Windscreen
    • User guide
    Quick View
  • 0 out of 5

    Shure VP88 Stereo Condenser Microphone

    98,267.00

    Record It In Stereo with One Mic!

    The VP88 is an ideal microphone for “on site” audio recording and broadcast purposes, capable of capturing the nuances and feel of location recording. Though it looks delicate, the VP88 is durable and dependable, built to withstand the wear and tear of demanding production environments. This single-point stereo condenser microphone has three switch-selectable levels of stereo width to control the degree of stereo “spread.”

    Tech Specs

    • Microphone Type:Condenser
    • Mono/Stereo:Mid-side
    • Polar Pattern:Mid-side
    • Frequency Response:40Hz-20kHz
    • Max SPL:129dB
    • Output Impedance:150 ohms
    • Self Noise:24dB (A weighted)
    • Low Cut Filter:80Hz (-12dB/octave)
    • Color:Black
    • Connector:5-pin XLR
    • Weight:0.82 lbs.
    • Included Accessories:Stand Mount, Windscreen, 6V Battery, Carry Bag, Y-cable
    • Manufacturer Part Number:VP88
    Quick View
  • 0 out of 5

    Shure VP89L Shotgun Microphone

    90,999.00

    Modular Condenser Directional Microphone

    The Shure VP89L is another model in the VP89 series of professional shotgun microphones, similar to the VP89M but with distinct differences primarily in size and reach. Here are the key features of the Shure VP89L:

    1. Shotgun Design: Like the VP89M, the VP89L features a shotgun microphone design with a highly directional polar pattern. This makes it suitable for capturing sound sources from a distance while rejecting ambient noise and off-axis sound.
    2. Interchangeable Capsules: Similar to the VP89M, the VP89L also comes with interchangeable long, medium, and short shotgun capsules. This allows for flexibility in adjusting the microphone’s reach and directionality according to different recording situations.
    3. Longer Length: The VP89L is longer than the VP89M, which can provide greater directionality and reach. This makes it particularly useful for applications where capturing sound from a distance is necessary, such as in film, broadcast, and sports production.
    4. Build Quality: The VP89L, like other Shure microphones, is known for its robust build quality, designed to withstand the rigors of professional use in various environments.
    5. Frequency Response: It typically offers a wide frequency response suitable for capturing a variety of sound sources with clarity and accuracy.
    6. Accessories: It is likely to come with accessories such as a foam windscreen and a carrying case, enhancing its usability in different recording scenarios.
    7. Applications: The VP89L is commonly used on boom poles for film and TV production, in sports broadcasting, and for capturing natural sound and dialogue in documentary filmmaking.

    Overall, the Shure VP89L is favored by professionals for its high-quality audio capture, extended reach due to its longer length, and versatility with interchangeable capsules, making it suitable for a wide range of professional audio recording applications.

    Quick View
X