Mackie

Showing 1–16 of 45 results

  • 0 out of 5

    Mackie CR3-XBT Multimedia Monitors with Bluetooth

    10,999.00

    Value-packed Desktop Monitors with Bluetooth

    Mackie CR3-XBT Multimedia Monitors put studio-quality sound right on your desktop at a great value. Mackie have earned their reputation for quality studio monitoring over the years, and CR3-XBT Multimedia Monitors are just as suitable for multimedia production as they are for gaming and casual listening. Musicians appreciate the convenient front-panel headphone output for private listening sessions, while a range of inputs are ready to accept signal from your computer, audio interface, or portable device. And built-in Bluetooth connectivity means you can even stream audio wirelessly. Whether you’re outfitting an editing studio, or simply looking to upgrade your desktop listening experience, you’ll be impressed with Mackie CR3-XBT Multimedia Monitors.

    What’s in the box?

    • Desktop monitor speakers
    • Speaker cable
    • RCA to 1/8″ cable
    • Built-in Bluetooth for wireless audio streaming
    • Quick start guide

    Mackie CR3-XBT Multimedia Monitor System Features:

    • Desktop monitor speakers with 3″ drivers
    • Convenient front-panel volume control and headphone output
    • Includes speaker cable and RCA-1/8″ cable

    Tech Specs

    • Powered:Yes
    • Power Configuration:Single Amp
    • LF Driver Size:3″ Woofer
    • LF Driver Type:Polypropylene-coated
    • HF Driver Size:0.75″ Tweeter
    • HF Driver Type:Ferrofluid-cooled Silk-domed
    • Total Power:50W Class D
    • Frequency Response:70Hz-20kHz (-10dB)
    • Maximum Peak SPL:97 dB SPL @ 1m
    • Input Types:1 x Dual RCA Stereo, 2 x 1/4″, 1 x 1/8″ || Bluetooth
    • Output Types:Bare Wire terminal (connects pair), 1 x 1/8″ (headphones)
    • Bluetooth:Yes
    • Enclosure Type:Rear Ported
    • Enclosure Material:Solid MDF wood cabinet with black vinyl wrap
    • Height:8.1″
    • Width:5.5″
    • Depth:7.1″
    • Weight:7.8 lbs.
    • Manufacturer Part Number:2052117-00
    Quick View
  • 0 out of 5

    Mackie CR3X Multimedia Monitors-Pair

    8,999.00

    Value-packed Desktop Monitoring Solution

    Mackie CR3-X Multimedia Monitors put studio-quality sound right on your desktop at a great value. Mackie have earned their reputation for quality studio monitoring over the years, and CR3-X Multimedia Monitors are just as suitable for multimedia production as they are for gaming and casual listening. Musicians appreciate the convenient front-panel headphone output for private listening sessions, and a range of inputs are ready to accept signal from your computer, audio interface, or portable device. Whether you’re outfitting an editing studio, or simply looking to upgrade your desktop listening experience, you’ll be impressed with Mackie CR3-X Multimedia Monitors.

    What’s in the box?

    • CR3-X desktop monitor speakers
    • Speaker cable
    • RCA to 1/8″ cable
    • 1/8″ to 1/8″ cable
    • Quick start guide

    Mackie CR3-X Multimedia Monitor System Features:

    • Desktop monitor speakers with 3″ drivers
    • Convenient front-panel volume control and headphone output
    • Includes speaker cable, RCA-1/8″ cable, and 1/8″-1/8″ cable

    Tech Specs

    • Powered:Yes
    • LF Driver Size:3″
    • LF Driver Type:Polypropylene-coated
    • HF Driver Size:.75″
    • HF Driver Type:Ferrofluid-cooled Silk-dome
    • Input Types:2 x 1/4″ TRS, 1 x Dual RCA Stereo, 1 x 1/8″ TS
    • Output Types:1 x 1/8″ (headphones), bare wire connectors +/- (from powered speaker)
    • Enclosure Type:Rear Ported
    • Enclosure Material:Molded Plastic
    • Height:8.1″
    • Width:5.5″
    • Depth:7.1″
    • Weight:7.8 lbs.
    Quick View
  • 0 out of 5

    Mackie CR4-X Multimedia Monitors- Pair

    15,499.00

    Value-packed Desktop Monitoring Solution

    Mackie CR4-X Multimedia Monitors put studio-quality sound right on your desktop at a great value. Mackie have earned their reputation for quality studio monitoring over the years, and CR4-X Multimedia Monitors are just as suitable for multimedia production as they are for gaming and casual listening. Musicians appreciate the convenient front-panel headphone output for private listening sessions, and a range of inputs are ready to accept signal from your computer, audio interface, or portable device. Whether you’re outfitting an editing studio, or simply looking to upgrade your desktop listening experience, you’ll be impressed with Mackie CR4-X Multimedia Monitors.

    What’s in the box?

    • Desktop monitor speakers
    • Speaker cable
    • RCA to 1/8″ cable
    • 1/8″ to 1/8″ cable
    • Quick start guide

    Mackie CR4-X Multimedia Monitor System Features:

    • Desktop monitor speakers with 4″ drivers
    • Convenient front-panel volume control and headphone output
    • Includes speaker cable, RCA-1/8″ cable, and 1/8″-1/8″ cable

    Tech Specs

    • Powered:Yes
    • Power Configuration:Single Amp
    • LF Driver Size:4″ woofer
    • LF Driver Type:Polypropylene-coated
    • HF Driver Size:0.75″ Tweeter
    • HF Driver Type:Ferrofluid-cooled Silk-dome
    • Total Power:50W
    • Frequency Range:70Hz-20kHz
    • Input Types:1 x Dual RCA Stereo, 2 x 1/4″, 1 x 1/8″,
    • Output Types:1 x 1/8″ (headphones), bare wire connectors +/- (from powered speaker)
    • Enclosure Type:Rear Ported
    • Enclosure Material:Molded Plastic
    • Height:8.9″
    • Width:6.1″
    • Depth:8.3″
    • Weight:10.1 lbs.
    • Manufacturer Part Number:2052118-00
    Quick View
  • 0 out of 5

    Mackie CR4-XBT Multimedia Monitors with Bluetooth

    16,000.00

    Value-packed Desktop Monitors with Bluetooth

    Mackie CR4-XBT Multimedia Monitors put studio-quality sound right on your desktop at a great value. Mackie have earned their reputation for quality studio monitoring over the years, and CR4-XBT Multimedia Monitors are just as suitable for multimedia production as they are for gaming and casual listening. Musicians appreciate the convenient front-panel headphone output for private listening sessions, while a range of inputs are ready to accept signal from your computer, audio interface, or portable device. And built-in Bluetooth connectivity means you can even stream audio wirelessly. Whether you’re outfitting an editing studio, or simply looking to upgrade your desktop listening experience, you’ll be impressed with Mackie CR4-XBT Multimedia Monitors.

    What’s in the box?

    • Desktop monitor speakers
    • Speaker cable
    • RCA to 1/8″ cable
    • Built-in Bluetooth for wireless audio streaming
    • Quick start guide

    Mackie CR4-XBT Multimedia Monitor System Features:

    • Desktop monitor speakers with 4″ drivers
    • Convenient front-panel volume control and headphone output
    • Includes speaker cable and RCA-1/8″ cable

    Tech Specs

    • Powered:Yes
    • Power Configuration:Single Amp
    • LF Driver Size:4″ Woofer
    • LF Driver Type:Polypropylene-coated
    • HF Driver Size:0.75″ Tweeter
    • HF Driver Type:Ferrofluid-cooled Silk-domed
    • Total Power:50W Class AB
    • Frequency Range:70Hz-20kHz
    • Input Types:1 x 1/4″, 1 x Dual RCA Stereo, 1 x 1/8″ || Bluetooth
    • Output Types:bare wire connectors +/- (connects pair), 1 x 1/8″ (headphones)
    • Bluetooth:Yes
    • Enclosure Type:Rear Ported
    • Enclosure Material:Solid MDF with Black Vinyl wrap
    • Height:8.8″
    • Width:6.1″
    • Depth:7.3″
    • Weight:12 lbs.
    Quick View
  • 0 out of 5

    Mackie CR5-X Multimedia Monitors

    18,999.00

    Value-packed Desktop Monitoring Solution

    Mackie CR5-X Multimedia Monitors put studio-quality sound right on your desktop at a great value. Mackie have earned their reputation for quality studio monitoring over the years, and CR5-X Multimedia Monitors are just as suitable for multimedia production as they are for gaming and casual listening. Musicians appreciate the convenient front-panel headphone output for private listening sessions, and a range of inputs are ready to accept signal from your computer, audio interface, or portable device. Whether you’re outfitting an editing studio, or simply looking to upgrade your desktop listening experience, you’ll be impressed with Mackie CR5-X Multimedia Monitors.

    What’s in the box?

    • Desktop monitor speakers
    • Speaker cable
    • RCA to 1/8″ cable
    • 1/8″ to 1/8″ cable
    • Quick start guide

    Mackie CR5-X Multimedia Monitor System Features:

    • Desktop monitor speakers with 5″ drivers
    • Convenient front-panel volume control and headphone output
    • Includes speaker cable, RCA-1/8″ cable, and 1/8″-1/8″ cable

    Tech Specs

    • Powered:Yes
    • Power Configuration:Single Amp
    • LF Driver Size:5″ Woofer
    • LF Driver Type:Polypropylene-coated
    • HF Driver Size:0.75″ Tweeter
    • HF Driver Type:Ferrofluid-cooled Silk-dome
    • Total Power:80W Class AB
    • Frequency Response:50Hz-20kHz (-10dB)
    • Input Types:1 x 1/8″ (aux), 2 x 1/4″, 1 x Dual RCA Stereo
    • Output Types:bare wire connectors +/- (connects pair), 1 x 1/8″ (headphones)
    • Enclosure Type:Rear Ported
    • Enclosure Material:Solid MDF with Black Vinyl wrap
    • Height:10.2″
    • Width:6.9″
    • Depth:9.3″
    • Weight:14.9 lbs.
    • Manufacturer Part Number:2052120-00
    Quick View
  • 0 out of 5

    Mackie CR5-XBT Multimedia Monitors with Bluetooth

    20,999.00

    Value-packed Desktop Monitors with Bluetooth

    Mackie CR5-XBT Multimedia Monitors put studio-quality sound right on your desktop at a great value. Mackie have earned their reputation for quality studio monitoring over the years, and CR5-XBT Multimedia Monitors are just as suitable for multimedia production as they are for gaming and casual listening. Musicians appreciate the convenient front-panel headphone output for private listening sessions, while a range of inputs are ready to accept signal from your computer, audio interface, or portable device. And built-in Bluetooth connectivity means you can even stream audio wirelessly. Whether you’re outfitting an editing studio, or simply looking to upgrade your desktop listening experience, you’ll be impressed with Mackie CR5-XBT Multimedia Monitors.

    What’s in the box?

    • Desktop monitor speakers
    • Speaker cable
    • RCA to 1/8″ cable
    • Built-in Bluetooth for wireless audio streaming
    • Quick start guide

    Mackie CR5-XBT Multimedia Monitor System Features:

    • Desktop monitor speakers with 5″ drivers
    • Convenient front-panel volume control and headphone output
    • Includes speaker cable and RCA-1/8″ cable
    Quick View
  • 0 out of 5

    Mackie CR8-XBT Multimedia Monitors with Bluetooth

    34,499.00

    Value-packed Desktop Monitors with Bluetooth

    Mackie CR3-XBT Multimedia Monitors put studio-quality sound right on your desktop at a great value. Mackie have earned their reputation for quality studio monitoring over the years, and CR3-XBT Multimedia Monitors are just as suitable for multimedia production as they are for gaming and casual listening. Musicians appreciate the convenient front-panel headphone output for private listening sessions, while a range of inputs are ready to accept signal from your computer, audio interface, or portable device. And built-in Bluetooth connectivity means you can even stream audio wirelessly. Whether you’re outfitting an editing studio, or simply looking to upgrade your desktop listening experience, you’ll be impressed with Mackie CR3-XBT Multimedia Monitors.

    What’s in the box?

    • Desktop monitor speakers
    • Speaker cable
    • RCA to 1/8″ cable
    • Quick start guide

    Mackie CR8-XBT Multimedia Monitor System Features:

    • Desktop monitor speakers with 8″ drivers
    • Convenient 1/4-inch and RCA inputs, along with 1/8-inch headphone output
    • Built-in Bluetooth for wireless audio streaming
    • Includes speaker cable and RCA-1/8″ cable

    Tech Specs

    • Powered:Yes
    • Power Configuration:Single Amp
    • LF Driver Size:8″ Woofer
    • LF Driver Type:Polypropylene-coated
    • HF Driver Size:0.75″ Tweeter
    • HF Driver Type:Ferrofluid-cooled Silk-domed
    • Total Power:160W Class D
    • Frequency Response:40Hz-20kHz (-10dB)
    • Crossover Frequency:3.8kHz
    • Maximum Peak SPL:108 dB SPL @ 1m
    • Input Types:1 x Dual RCA Stereo, 2 x 1/4″, 1 x 1/8″ || Bluetooth
    • Output Types:bare wire connectors +/- (to passive speaker), 1 x 1/8″ *headphones)
    • Bluetooth:Yes
    • Enclosure Type:Rear Ported
    • Enclosure Material:Solid MDF wood cabinet with black vinyl wrap
    • Height:14.8″
    • Width:9.9″
    • Depth:13.6″
    • Weight:35.2 lbs.
    • Manufacturer Part Number:2052122-00
    Quick View
  • 0 out of 5

    Mackie CR8S-XBT Multimedia Subwoofer with Bluetooth

    22,999.00

    Big Value in this Multimedia Subwoofer

    Whether you’re designing a desktop monitoring system for gaming, multimedia production, or casual listening, you’ll appreciate the rich bass tone the Mackie CR8S-XBT powered subwoofer brings to your system. With an 8″ driver and 200-watts of power, the CR8S-XBT brings punch and power to the lowest octaves. Musicians appreciate the included desktop remote for easy volume adjustments, and the built-in Bluetooth connectivity is a sweet solution for wireless music streaming. Add some serious authority to the sound of your desktop monitoring system, with the Mackie CR8S-XBT powered subwoofer with Bluetooth.

    What’s in the box?

    • Powered multimedia subwoofer
    • CRDV desktop remote
    • RCA to 1/8″ cable
    • Power cord
    • Quick start guide

    Mackie CR8S-XBT Multimedia Monitor System Features:

    • Powered subwoofer with 8″ driver and 200W amplification
    • Fine-tune your sound with input/output level controls and a variable crossover
    • Built-in Bluetooth for wireless audio streaming
    • Includes convenient desktop remote control and RCA-1/8″ cable

    Tech Specs

    • Powered:Yes
    • Speaker Size:8″
    • Driver Type:Polypropylene-coated
    • Total Power :200W Class D
    • Crossover Frequency:40-180Hz (adjustable)
    • Maximum Peak SPL:112 dB SPL @ 1m
    • Input Types:1 x Dual RCA Stereo, 2 x 1/4″, 1 x 1/4″ (from CRDV remote), Bluetooth
    • Output Types:1 x Dual RCA Stereo, 2 x 1/4″
    • Enclosure Type:Sealed
    • Enclosure Material:MDF with Black Vinyl Wrap
    • Height:14″
    • Width:12.6″
    • Depth:16.2″
    • Weight:24.5 lbs.
    Quick View
  • 0 out of 5

    Mackie DL16S 16-channel Rackmount Digital Mixer

    70,999.00

    16-channel Rack Mixer with Built-in Wi-Fi

    Put a Mackie DL16S in your rack, and you can mix from anywhere. All you need is an iPad and Mackie’s Master Fader control app. 16 great-sounding Onyx+ mic preamps and onboard FX ensure a great-sounding performance. The DL16S also functions as a 16-in/16-out USB interface, so you can record the show then mix it later in the studio. You can also play back a full multitrack recording for a virtual sound check. The DL16S supports up to 20 iPads at once, so multiple engineers can work from one mixer. And with built-in Wi-Fi networking and instant recall of every setting, setup is a snap. The DL16S gets you into your mix like never before.

    Control everything from anywhere with wireless mixing

    Leave that bulky snake at home! Because you can control the Mackie DL16S with your iPad, you can place it anywhere. Even if the DL16S is onstage, you can walk around the venue to fine-tune your mix. It’s a great way to ensure optimal sound quality for every member of your audience. And because the DL16S supports up to 20 iPads at once, multiple engineers can work from one DL16S. You can even set up personal mixes for each performer that are tweakable via any iOS device. Back in the day, you would have needed miles of cable and a pile of submixers to pull off this much signal routing. But with the DL16S in your rack, all you need is an iPad and your fingers!

    All your connections are covered

    With the Mackie DL16S in your live rig, you’ll never run short of I/O. Providing you with 16 stereo-linkable input channels, 8 fully assignable XLR outputs, and 16 great-sounding Onyx+ mic preamps, the DL16S has your I/O needs covered. On top of that, you also get 13 output buses, 6 stereo-linkable aux sends, 6 stereo-linkable subgroups, a Main L/R bus, and a headphone output. And best of all, the DL16S gives you total recall of your settings!

    Integrated USB 2.0 audio interface

    One of the Mackie DL16S’s most useful features is multitrack recording and playback. Use the DL16S as an audio interface to record straight to your DAW. Play intermission music, backing tracks, and more. Play back your full multitrack recording for a virtual sound check. You can also use your DAW’s audio plug-ins in a live environment. The DL16S is a value-packed, high-channel-count studio recording solution.

    Create polished, professional-sounding mixes

    Packed with DSP, the Mackie DL16S gives you 16 input channels with a 4-band parametric EQ, highpass filter, noise gate, and compression, as well as 13 output buses with a 4-band parametric EQ, highpass and lowpass filters, 31-band graphic EQ, compressor/limiter, and alignment delay. On top of that, you also get onboard delay, reverb, and modulation effects. With four stereo FX processors with dedicated sends and returns, full I/O routing with A/B sources per channel, and modern and vintage options for each processor, churning out polished, pro-quality mixes is no problem.

    A large-format console in the palm of your hand

    The Mackie DL16S supplies 16 channels of powerful digital mixing. You get wireless control over everything, including its processing and routing, via Mackie’s Master Fader control app. The DL16S is tailor-made for live sound engineers who demand flexible wireless mixing. So, whether you work in a theater, house of worship, or concert hall — if you’re serious about live sound, you owe it to yourself to check out the DL16S.

    Mackie DL16S Features:

    • Ample I/O including 16 stereo-linkable input channels, 8 fully assignable XLR outputs, 13 output buses, 6 stereo-linkable aux sends, 6 stereo-linkable subgroups, a Main L/R bus, and a headphone output
    • 16 recallable Onyx+ mic preamps deliver top-notch sound
    • Wireless mixing allows you to take control of your mix via an iPad
    • Tweak your mix, processing, and routing from anywhere in the venue
    • Built-in Wi-Fi networking and instant recall ensure easy setup
    • Supports up to 20 iPads at once to accommodate multiple engineers
    • 4 onboard FX processors with dedicated sends and returns create polished, professional-sounding mixes
    • 16-in/16-out USB interface for recording straight to your DAW
    • Play intermission music, backing tracks, and more
    • Play back your full multitrack recording for a virtual sound check
    • Use your DAW’s audio plug-ins in a live environment

    Tech Specs

    • Type:Digital Stage Box Mixer
    • Channels:16 input channels, 32 mixing channels
    • Inputs – Mic Preamps:8 x XLR, 6 x XLR-1/4″ combo, 2 x XLR-1/4″ combo (mic/line/Hi-Z)
    • Outputs – Main:2 x XLR (L/R, assignable), 6 x XLR (assignable)
    • Aux Sends:6 x Stereo Sends
    • Busses/Groups:6 x Stereo Sub Groups, 13 x Output Busses, 6 x Mute Groups
    • Data I/O:1 x RJ45 (external control)
    • USB:1 x Type B
    • Computer Connectivity:USB (16 x 16), Wi-Fi
    • Headphones:1 x 1/4″
    • EQ Bands:4-band Parametric EQ, Highpass Filter
    • Effects:4 x Stereo FX Processors, Reverb, Delay, Chorus, Flange
    • Signal Processing:Gate, Compressor
    • Software:Master Fader 5 Control App (iOS 11 or later, Android 6.0 or later, macOS 10.2, Windows 10)
    • Height:5.6″
    • Depth:5.8″
    • Width:14.1″
    • Weight:6.2 lbs.
    • Manufacturer Part Number:2048990-00

     

    Quick View
  • 0 out of 5

    Mackie DL32S 32-channel Rackmount Digital Mixer

    123,000.00

    32-channel Rack Mixer with Built-in Wi-Fi

    Put a Mackie DL32S in your rack, and you can mix from anywhere. All you need is an iPad and Mackie’s Master Fader control app. 32 great-sounding Onyx+ mic preamps and onboard FX ensure a great-sounding performance. The DL32S also functions as a 32-in/32-out USB interface, so you can record the show then mix it later in the studio. You can also play back a full multitrack recording for a virtual sound check. The DL32S supports up to 20 iPads at once, so multiple engineers can work from one mixer. And with built-in Wi-Fi networking and instant recall of every setting, setup is a snap. The DL32S gets you into your mix like never before.

    Control everything from anywhere with wireless mixing

    Leave that bulky snake at home! Because you can control the Mackie DL32S with your iPad, you can place it anywhere. Even if the DL32S is onstage, you can walk around the venue to fine-tune your mix. It’s a great way to ensure optimal sound quality for every member of your audience. And because the DL32S supports up to 20 iPads at once, multiple engineers can work from one DL32S. You can even set up personal mixes for each performer that are tweakable via any iOS device. Back in the day, you would’ve needed miles of cable and a pile of submixers to pull off this much signal routing. But with the DL32S in your rack, all you need is an iPad and your fingers!

    All your connections are covered

    With the Mackie DL32S in your live rig, you’ll never run short of I/O. Providing you with 32 stereo-linkable input channels, 10 fully assignable XLR outputs, and 32 great-sounding Onyx+ mic preamps, the DL32S has your I/O needs covered. Of the 32 input channels, 16 are XLR jacks, 16 feature XLR/TRS combo jacks, and two include hi-Z inputs. On top of that, you also get 15 output buses, 8 stereo-linkable aux sends, 6 stereo-linkable subgroups, a Main L/R bus, and a headphone output. And best of all, the DL32S gives you total recall of your settings!

    Integrated USB 2.0 audio interface

    One of the Mackie DL32S’s most useful features is multitrack recording and playback. Use the DL32S as an audio interface to record straight to your DAW. Play intermission music, backing tracks, and more. Play back your full multitrack recording for a virtual sound check. You can also use your DAW’s audio plug-ins in a live environment. The DL32S is a value-packed, high-channel-count studio recording solution.

    Create polished, professional-sounding mixes

    Packed with DSP, the Mackie DL32S gives you 32 input channels with a 4-band parametric EQ, highpass filter, noise gate, and compression, as well as 15 output buses with a 4-band parametric EQ, highpass and lowpass filters, 31-band graphic EQ, compressor/limiter, and alignment delay. On top of that, you also get onboard delay, reverb, and modulation effects. With four stereo FX processors with dedicated sends and returns, full I/O routing with A/B sources per channel, and modern and vintage options for each processor, churning out polished, pro-quality mixes is no problem.

    A large-format console in the palm of your hand

    The Mackie DL32S supplies 32 channels of powerful digital mixing. You get wireless control over everything, including its processing and routing, via Mackie’s Master Fader control app. The DL32S is tailor-made for live sound engineers who demand flexible wireless mixing. So, whether you work in a theater, house of worship, or concert hall — if you’re serious about live sound, you owe it to yourself to check out the DL32S.

    Mackie DL32S Features:

    • Ample I/O including 32 stereo-linkable input channels, 10 fully assignable XLR outputs, 15 output buses, 8 stereo-linkable aux sends, 6 stereo-linkable subgroups, a Main L/R bus, and a headphone output
    • 16 input channels are XLR jacks, 16 feature XLR/TRS combo jacks, and two include hi-Z inputs
    • 32 recallable Onyx+ mic preamps deliver top-notch sound
    • Wireless mixing allows you to take control of your mix via an iPad
    • Tweak your mix, processing, and routing from anywhere in the venue
    • Built-in Wi-Fi networking and instant recall ensure easy setup
    • Supports up to 20 iPads at once to accommodate multiple engineers
    • 4 onboard FX processors with dedicated sends and returns create polished, professional-sounding mixes
    • 32-in/32-out USB interface for recording straight to your DAW
    • Play intermission music, backing tracks, and more
    • Play back your full multitrack recording for a virtual sound check
    • Use your DAW’s audio plug-ins in a live environment

    Tech Specs

    • Type:Digital Stage Box Mixer
    • Channels:32
    • Inputs – Mic Preamps:16 x XLR, 14 x XLR-1/4″ combo, 2 x XLR-1/4″ combo (mic/line/Hi-Z)
    • Outputs – Main:2 x XLR (L/R, assignable), 8 x XLR (assignable)
    • Aux Sends:8 x Stereo Sends
    • Busses/Groups:6 x Stereo Sub Groups, 15 x Output Busses, 6 x Mute Groups
    • Data I/O:1 x RJ45 (external control)
    • USB:1 x Type B
    • Computer Connectivity:USB (32 x 32), Wi-Fi
    • Headphones:1 x 1/4″
    • EQ Bands:4-band Parametric EQ, Highpass Filter
    • Effects:4 x Stereo FX Processors, Reverb, Delay, Chorus, Flange
    • Signal Processing:Gate, Compressor
    • Software:Master Fader 5 Control App (iOS 11 or later, Android 6.0 or later, macOS 10.2, Windows 10)
    • Height:7.3″
    • Depth:5.8″
    • Width:17.6″
    • Weight:8.8 lbs.
    • Manufacturer Part Number:2049000-00
    Quick View
  • 0 out of 5

    Mackie HM-4 Headphone Amplifier

    4,799.00

    High-performance Headphone Amplification

    The Mackie HM-4 is one of the easiest ways you’ll find to increase the monitoring capacity of your studio. This desktop-friendly headphone amplifier splits a single stereo signal into four headphone outputs, each with its own level control. Premium analog circuitry ensures super-high headroom and a low noise floor, while a heavy-gauge steel chassis and long-wear potentiometers provide extreme durability. The HM-4 is a great way to expand your audio interface’s headphone output and add solid cue mix distribution to your rig. The HM-4 delivers high-performance headphone amplification that’s sure to become an invaluable asset in your studio.

    Premium analog circuitry delivers top-notch sound

    No matter what you’re recording, the HM-4 will deliver studio-quality sound. Premium analog circuitry ensures maximum headroom and low noise. Here, we’re impressed by just how great this headphone amplifier sounds — especially at this price.

    Built-Like-A-Tank design withstands day-to-day abuse

    The HM-4 can endure a great deal of punishment, thanks to Mackie’s Built-Like-A-Tank construction. The HM-4 features a heavy-gauge steel chassis, along with long-wear potentiometers. This is one piece of studio gear that’s clearly built to last.

    Mackie HM-4 Features:

    • Desktop-friendly 4-channel headphone amplifier
    • Splits a single stereo signal into four headphone outputs
    • Expands your audio interface’s headphone output and adds solid cue mix distribution to your rig
    • Each output features its own level control
    • Premium analog circuitry ensures super-high headroom and a low noise floor
    • Heavy-gauge steel chassis and long-wear potentiometers provide extreme durability
    • Power supply is included

    Tech Specs

    • Type:Headphone Amp
    • Input Channels:Single Stereo channel
    • Output Channels:4
    • Analog Inputs:1 x 1/4″ TRS (stereo)
    • Headphones:4 x 1/4″ TRS
    • Controls per Channel:Volume
    • Form Factor:Desktop
    • Power Supply:12V DC power supply (included)
    • Height:2″
    • Width:4.3″
    • Depth:2.3″
    • Weight:0.5 lbs.
    Quick View
  • 0 out of 5

    Mackie MIX12FX Analog Mixing Console

    11,599.00

    Compact Mackie Mixer Quality with Onboard Effects!

    The midsize Mackie Mix12FX desktop audio mixer offers you the full-scale functions and the quality everyone here has come to expect from Mackie. Four microphone preamplifiers with switchable phantom power, 3-band EQs, and 75Hz highpass filters accommodate a wide range of mics and mixing conditions. Another four stereo channels let you connect keyboards, media players, and other line-level gear. Each channel also comes with an FX send, which lets you tap into Mix12FX’s effects processor. Twelve onboard digital effects make it easy to add reverb to vocals, depth to drums, or atmosphere across your mix.

    Mackie Mix12FX Compact Desktop Mixer Features:

    • A high-performance, 12-input desktop mixer with onboard effects
    • 4 mic/line input channels includes switchable phantom power
    • Each mono channel also features a 3-band EQ and highpass filtering
    • 4 stereo channels offer a choice of balanced and unbalance line input for
    • FX send on each channel lets you pass signal to the dedicated effects processor
    • 12 onboard effects let you add space, depth, and dimension to your mix
    • Tape RCA I/O offers additional signal routing options
    • Separate Main Mix and Headphones/CR volumes provide added mixing flexibility
    • Built to Mackie’s toughness standards for portable use

    Get compact mixing, onboard effects, and Mackie quality with the Mix12FX!

    Tech Specs

    • Type:Analog
    • Channels:12
    • Inputs – Mic Preamps:4 x XLR
    • Phantom Power:4 Channels
    • Inputs – Line:12 x TRS, 1 x stereo RCA
    • Outputs – Main:2 x TRS
    • Outputs – Other:1 x stereo RCA (Tape), 2 x TRS (Control Room)
    • Aux Sends:1 x Post
    • Send/Return I/O:1 x TRS (FX Send)
    • Headphones:1 x 1/4″
    • EQ Bands:3-band
    • Effects:Yes
    • Height:2.1″
    • Width:11.7″
    • Depth:9.6″
    • Weight:3.7 lbs.
    • Manufacturer Part Number:2044096-00
    Quick View
  • 0 out of 5

    Mackie MIX5 Analog Mixing Console

    5,299.00

    Small-scale Mixer That’s Big on Function

    Whether you need a small mixer for your live show or your creative work, the Mackie Mix5 proves that you don’t have to give up decent sound quality, just because you need more channels or extra bells and whistles. In addition to the quality engineers have come to expect from Mackie, this extremely compact 5-channel mixer offers a single microphone preamplifier outfitted with a 2-band equalizer plus two additional channels with stereo inputs for keyboards or music players. For added convenience, the Mackie Mix5 even comes equipped with an RCA I/O path for recording and separate volume controls for the main and the headphone outputs.

    Mackie Mix5 Compact Desktop Mixer Features:

    • A high-performance, low-channel-count desktop mixer
    • Mic/line input channel includes a 2-band EQ for tone shaping
    • Preamplifier always provides +15V phantom power for some condenser mics
    • 2 stereo channels offer a choice of balanced and unbalance line input
    • Tape RCA I/O offers additional signal routing options
    • Separate Main Mix and Headphones volumes
    • Built to Mackie’s toughness standards for portable use

    Get Mackie quality on a small scale with the Mix5 compact mixer!

    Tech Specs

    • Type:Analog
    • Channels:5
    • Inputs – Mic Preamps:1 x XLR
    • Phantom Power:1 Channel
    • Inputs – Line:5 x TRS, 1 x Stereo (RCA)
    • Outputs – Main:2 x TRS
    • Outputs – Other:1 x Stereo RCA (Tape)
    • Headphones:1 x 1/4″
    • EQ Bands:2-band
    • Height:1.7″
    • Width:5.5″
    • Depth:7.7″
    • Weight:1.4 lbs.
    Quick View
  • 0 out of 5

    Mackie MIX8 Analog Mixing Console

    7,299.00

    Midsize Mixer with Full-scale Mackie Quality

    Get full-scale functions and quality audio with the midsize Mackie Mix8 desktop audio mixer. This compact 6-input mixer offers a pair of microphone preamplifiers with switchable phantom power for your condenser microphones, and two additional channels offer inputs for keyboards, drum machines, and other stereo gear. But what makes the Mix8 stand out from similar mixers here  are its the 3-band equalizers and aux sends on each channel. For added convenience, the Mackie Mix8 even comes equipped with an RCA I/O path for recording and separate volume controls for the main and the headphone outputs.

    Mackie Mix8 Compact Desktop Mixer Features:

    • A high-performance, low-channel-count desktop mixer
    • 2 mic/line input channels includes switchable phantom power for condenser microphones
    • 2 stereo channels offer a choice of balanced and unbalance line input
    • All channels include 3-band equalizers and a aux send
    • Tape RCA I/O offers additional signal routing options
    • Separate Main Mix and Headphones volumes provide added mixing flexibility
    • Built to Mackie’s toughness standards for portable use

    Get Mackie quality on a smaller scale with the Mix8 compact mixer!

    Quick View
  • 0 out of 5

    Mackie MRS10 Powered Studio Subwoofer

    38,999.00

    Maximum Low-end For Your MR Series Monitors

    Mackie MR series studio monitors deliver extreme clarity with plenty of output and responsive, dynamic lows. But if you’re working on hip-hop, EDM, or any other bass-heavy project, you’ll need more low-end extension. Enter the MRS10. This powered subwoofer pumps 120 chest-thumping watts through a 10″ glass-aramid-composite woofer, bolstering your low-end performance, increasing your SPL capabilities, and optimizing your studio by allowing your mains to focus on mids and highs. An adjustable crossover and switchable polarity make integrating the MRS10 into your studio easy. Complete with an eye-catching all-wood cabinet, the MRS10 looks as great as it sounds.

    “Big monitor” bass response

    If you’ve ever heard a loud playback on the “bigs” (main monitors) in a world-class studio, it’s a revelation. You can’t help but marvel at the incredibly tight and deep bass. For a modest investment, the Mackie MRS10 can take you to that place. Feel the crush of a well-recorded kick drum — the sheer magnitude of a monster synth bass. To record frequencies this low, you’ve got to be able to hear them properly. In combination with Mackie’s MR series studio monitors (or any other solid main monitors), the MRS10 gives you “big monitor” capabilities (including the ability to impress the heck out your clients).

    Easy integration into your studio

    Mackie equipped the MRS10 with a number of features, including an adjustable crossover and a switchable polarity, that make it a breeze to integrate it into your monitoring setup. You also get flexible connectivity, with XLR and TRS connectors for both the inputs and outputs. Here, we appreciate how the Sub/HPF Bypass footswitch bypasses the sub for a real-world reality check.

    It’s a Mackie

    In the ’90s, Mackie rewrote the book on nearfield studio monitoring, and they’ve been tweaking ever since to give you even more affordable and accurate monitors. But whatever your main monitors are, your recordings will benefit from the full-range monitoring a subwoofer brings. Add a Mackie MRS10 to your monitoring setup and hear what you’ve been missing.

    Easy integration into your studio

    Mackie equipped the MRS10 with a number of features, including an adjustable crossover and a switchable polarity, that make it a breeze to integrate it into your monitoring setup. You also get flexible connectivity, with XLR and TRS connectors for both the inputs and outputs. Here, we appreciate how the Sub/HPF Bypass footswitch bypasses the sub for a real-world reality check.

    It’s a Mackie

    In the ’90s, Mackie rewrote the book on nearfield studio monitoring, and they’ve been tweaking ever since to give you even more affordable and accurate monitors. But whatever your main monitors are, your recordings will benefit from the full-range monitoring a subwoofer brings. Add a Mackie MRS10 to your monitoring setup and hear what you’ve been missing.

    Tech Specs

    • Powered:Yes
    • Speaker Size:10″ subwoofer
    • Driver Type:Glass-aramid composite cone
    • Total Power :120W (240W Peak)
    • Frequency Range:35Hz-180Hz (-3dB)
    • Crossover Frequency:40Hz-180Hz
    • Maximum Peak SPL:119dB SPL
    • Input Types:2 x XLR, 2 x 1/4″ TRS
    • Output Types:2 x XLR, 2 x 1/4″ TRS
    • Other I/O:1 x 1/4″ (sub bypass footswitch)
    • Features:Polarity switch
    • Height:15.6″
    • Width:12.6″
    • Depth:15.2″
    • Weight:33.1 lbs.
    • Manufacturer Part Number:2048460-00
    Quick View
  • 0 out of 5

    Mackie ProFX10v3 Analog Mixing Console

    17,499.00

    Robust Mixer That’s Ready for the Stage or the Studio

    Looking for a mixer that makes your life easier when you’re gigging? The Mackie ProFX10v3 10-channel USB mixer can do that and much more. The ProFX10v3 provides you with great sound and features found in larger mixers while remaining portable. This mixer is equipped with four of Mackie’s Onyx preamps that provide top-notch sound for your keyboard, mics, and guitars. Once you’re ready to go, you can use the onboard GigFX to add that little something extra to your mix. No matter if you’re onstage or in your studio, the Mackie ProFX10v3 will always give you amazing audio quality.

    Everything you need in one device

    We want to make sure that your gig sounds the way you want it to. That’s why we’re excited to tell you more about what the Mackie ProFX10v3 can really do. Each channel starts with Mackie’s Onyx preamp. Then you can use the 100Hz low cut control to keep your sound clean. Next, you can dial up to 60dB of gain before sending it through onboard compression and 3-band EQ. Every channel is equipped with FX level controls and a mute button. What’s more, every mic input is equipped with 48-volt phantom power.

    Improved digital effects

    To make sure that you sound perfect, the Mackie ProFX10v3 has an onboard effects processor. The effects processor has a blend function, FX level control, and a quick mute switch. The GigFX effects engine offers up 24 different effects ranging from delays, reverbs, choruses, distortion, and even an auto-wah feature. All of these effects are accessed by a simple twist of the Presets knob.

    Exceptional build quality

    Mackie mixers have been a mainstay for studio and live sound for many reasons. Chief among the reasons is durability and build quality. You’ll find these mixers in venues across the country covered in years of dust and grime. But when you power them up, they deliver top-notch sound and reliability. If you’ve never owned a Mackie before, you’ll be surprised by its sturdy construction. Seriously, your Mackie Mixer will stand up to whatever punishment you give it without batting an eye.

    Mackie ProFX10v3 Professional Effects USB Mixer Features:

    • GigFX effects engine delivers 24 effects including reverbs, delays, and choruses
    • 4 Mackie Onyx mic preamps deliver clear signal and 60dB of gain
    • Rugged design will stand up to the wear and tear of the road
    • 3 Band EQ and 100Hz low-cut filter on all channels
    • Built-in channel compression
    • 48-volt phantom power on all mic channels
    • 24-bit/192kHz A/D for unmatched audio quality
    • USB for playback music and recording into your computer
    • Balanced XLR and balanced/unbalanced outputs
    • Headphone output has separate volume control for comfortable monitoring

    Tech Specs

    • Type:Analog Mixer with USB Interface
    • Channels:10 (4 x mono, 3 x stereo)
    • Computer Connectivity:USB (2 x 4)
    • A/D Resolution:24-bit/192kHz
    • Faders:Rotary Pots
    • Inputs – Mic Preamps:2 x XLR-1/4″ combo (mic/line/Hi-Z), 2 x XLR (mic)
    • Phantom Power:Yes
    • Inputs – Line:2 x 1/4″, 4 x 1/4″ (2 x stereo), 1 x 1/8″ (stereo)
    • Outputs – Main:2 x XLR, 2 x 1/4″ (L/R), 2 x 1/4″ (control room)
    • Aux Sends:1 x FX Send (post)
    • Send/Return I/O:1 x 1/4″ (FX send)
    • Inserts:4 x 1/4″ (channel)
    • Headphones:1 x 1/4″
    • USB:1 x Type B
    • Other I/O:1 x 1/4″ (footswitch)
    • EQ Bands:3-band EQ, 100Hz Low-cut Filter
    • Signal Processing:2 x Channel Compressors
    • Effects:GigFX Engine: Reverbs, Chorus, Delay, Flange, Auto-Wah
    • Software:Waveform OEM DAW, FX Plug-in Collection
    • Power Source:12V DC power supply (included)
    • Height:3.3″
    • Width:11.9″
    • Depth:10.7″
    • Weight:4.9 lbs.
    • Manufacturer Part Number:2051300-00

     

    Quick View
X