JBLIndia Authorized Dealer - Page 4 of 5 - Electronic Emporium - Buy JBL Professional Audio Products in India Online - | Mumbai | New Delhi | Chennai| Bangalore | Kolkata| Hyderabad | Pune | Goa | Nashik | Nagpur | Kochi | Shillong | Darjeeling | Surat | Vadodara | Ahmedabad | Lucknow | Udaipur | Jodhpur| Jaipur | Chandigarh | Varanasi | Agra | Patna | Vishakhapatnam | Kanpur | Indore | Bhopal | Coimbatore | Guwahati | Mysore | Srinagar | Dehradun | Gurgaon | Shimla | Mangalore | Noida | Jamshedpur | Aurangabad

Showing 37–48 of 53 results

Compare
Quick View
JBL EON208P Portable PA System
Portable PA Systems
₹57,999.00
Portable PA for Music, Speech, and More

The JBL EON208P is a portable PA system you can carry in one hand, and it’s perfect for solo artists, small musical groups, public speaking, DJ gigs, and more. It weighs less than 40 pounds, but its dual speakers driven with 300 total watts of power provide clear, dynamic sound with excellent projection. Solo musicians know the convenience you get from a compact all-in-one PA system, especially in smaller rooms like coffee shops or art studios. For a compact eight-channel PA system that’s easy to transport and set up, check out the JBL EON208P.
JBL EON208P Portable PA System at a Glance:

Ready for instruments, microphones, and more

Optimized sound thanks to built-in DSP

Incredibly portable and easy to set up

Ready for instruments, microphones, and more

From small acoustic groups to DJ dance parties, you’re ready to perform with the JBL EON208P portable PA. Four microphone/instrument inputs are available for musicians, each with their own Treble, Bass, and Reverb controls. Additional line inputs are available on 1/4″, RCA, and 1/8″ connectors, and there’s a stereo output for adding a monitor speaker too. You can also stream audio from your mobile device via Bluetooth – perfect for backing tracks or break music.

Optimized sound thanks to built-in DSP

It’s easy to dial in optimum sound with the JBL EON208P portable PA. An LED next to the main volume control shows you how close you are to maximum output power. To protect your speakers and ensure the best sound, a built-in DSP limiter will automatically tame harsh audio peaks. And because it’s made by JBL, you can expect clear, detailed sound from the JBL EON208P at any volume level.

Incredibly portable and easy to set up

You can carry your guitar and the JBL EON208P to the stage in just one trip. The EON208P sports a convenient carry handle, and the speakers attach to the mixer for a complete all-in-one solution. Setup is easy too – just put the speakers up on speaker poles, attach them to the mixer with speaker cables, and you’re ready to perform!

JBL EON208P Portable PA System Features:

Portable PA system with 300 total watts of power and built-in mixer

4 inputs for mics and instruments, perfect for singer/songwriters and small musical groups

Additional line-level inputs for keyboards, drum machines, and music players

Polish your sound with Treble and Bass tone controls and built-in Reverb

Clear, detailed sound in a lightweight package thanks to the Class D amplifier

Bluetooth connectivity for streaming audio from your mobile device

Perform with confidence with the JBL EON208P!

Tech Specs

Type:Portable PA System

Inputs:4 x XLR-1/4″ combo, 2 x 1/4″ (left, right), 1 x stereo RCA pair, 2 x 1/4″ (keyboards, media), 1 x 1/8″ TRS (aux in)

Outputs:2 x 1/4″ (speaker out), 1 x stereo RCA pair, 2 x 1/4″ (monitor out), 1 x 1/4″ (sub out), 1 x 1/8″ (headphones)

Bluetooth:Yes

Power Amp:2 x 150W Class D

Total Power:300W

Enclosure Material:Plastic

Mounting Options:Pole

Power Source:Standard IEC AC cable

Height:22.6″

Width:30.5″

Depth:15.7″

Weight:38.8 lbs.

Manufacturer Part Number:EON208P
Add to cart
Compare
Quick View
JBL EON ONE Compact All-In-One Rechargeable Personal PA System
Portable PA Systems
₹39,999.00
JBL EON One Compact: Play Anywhere with This Battery-powered All-in-one PA

Want to play a gig in the middle of nowhere? With the JBL EON One Compact you can — no AC power required! The JBL EON One delivers 112dB of clean, full-range audio with a low-frequency range that extends all the way down to 37.5Hz. A built-in 4-channel mixer and generous I/O options accommodate your microphones, instrument, and portable media player. Bluetooth enables you to stream audio from your mobile device. You also get an 8-band EQ and high-quality digital effects for optimizing your sound, and a 1/4” passthrough for expanding the system for larger rooms. What’s more, the JBL EON One Compact weighs a mere 17.6 pounds, so it’s light enough to carry with one hand!

Ultra-portable PA with clean, full-range sound

The EON One Compact brings JBL Professional quality audio to any gig: speaking events, movie nights, coffeehouse shows — and with its rechargeable lithium-ion battery, you can even play where there’s no AC power! JBL EON One easily fits in the space of a passenger seat, and thanks to its even weight distribution and ergonomic handle, it loads into the gig and sets up in mere seconds. Just plug in up to four signal sources, and rock on. The JBL EON One Compact’s capable amp feeds a 1” high-frequency driver and 8″ low-frequency to deliver 112dB of clean, full-range audio anywhere.

4 well-equipped channels for greater flexibility and control

JBL put some serious thought into the EON One Compact. Channels 1–2 have combo 1/4″/XLR inputs, as well as 48V phantom power for your condenser mics. You also get a 1/4” hi-Z input and one 3.5mm aux input, enabling you to connect your guitar and portable media player. An 8-band EQ, customizable via presets, is on hand to optimize your sound, along with great-sounding reverb, chorus, and delay to give your performance a pro-quality sheen. You also get a one-touch ducking feature that safeguards the clarity of every word you speak. The JBL EON One Compact’s impressive feature set offers both top-shelf sound and convenience you’re sure to appreciate.

The JBL EON One is Bluetooth-equipped for wireless music streaming

The JBL EON One Compact makes it easy to keep weddings and dance parties spontaneous by allowing you to stream music from your mobile via Bluetooth from anywhere within range. This keeps dangerous wires off the dance floor and saves you and your guests from running to the PA every few minutes to switch songs. The JBL EON One Compact even has a built-in tablet stand to keep your device within reach and two USB 3.0 ports for high-speed charging. The JBL EON One Compact even has two USB 3.0 ports for charging. Take it from us: if you’re looking for extra-clean audio, a multichannel mixer, and wireless streaming in a compact box, the JBL Professional EON Compact is it.

JBL EON One Compact Features:

120W all-in-one PA delivers 112dB of clean, full-range audio anywhere

8” low-frequency driver exhibits earth-shaking bass down to 37.5Hz

4-channel mixer makes balancing your levels a breeze

Includes 2 x 1/4”/XLR combo inputs, 1 x 1/4” hi-Z input, and 1 x 3.5mm aux input

48V phantom power for your condenser microphones

Headphone jack for private monitoring

8-band EQ, customizable via presets, for optimizing your sound

Great-sounding reverb, chorus, and delay gives your performance a pro-quality sheen

1-touch ducking feature safeguards the clarity of every word you speak

Bluetooth-equipped with USB 3.0 charging ports and tablet stand for streaming from mobile devices

Works in both vertical and stage monitor orientations

1/4” passthrough so you can link another EON One Compact to reinforce your sound for larger rooms

Weighs only 17.6 lbs., so it’s easy to transport from gig to gig

Built-in pole mount opens up more configuration options

12-hour rechargeable battery

Tech Specs

Type:Speaker PA System

Speaker Drivers:1 x 8″ LF, 1 x 1″ HF Tweeter

Number of Mixer Channels:4

Number of Mic Preamps:2

Phantom Power:Yes

EQ:2-band Channel EQ, 8-band Output EQ

Effects:Reverb, Delay, Chorus

Inputs:2 x XLR-1/4 combo (mic/line), 1 x 1/4″ (Hi-Z), 1 x 1/8″ (aux)

Outputs:1 x 1/8″ (headphones), 1 x 1/4″ TRS (pass thru)

USB:2 x Type A 3.0

Bluetooth:Yes

Total Power:120W

Frequency Response:37.55Hz-20kHz

Software:JBL Compact Connect App (iOS/Android)

Enclosure Material:Polypropylene

Mounting Options:Floor, 1.38″ Stand Mount

Battery-powered:Yes

Power Source:Standard IEC AC cable / Rechargeable Lithium battery

Height:15.71″

Width:10.04″

Depth:11.46″

Weight:17.63 lbs.

Manufacturer Part Number:EON ONE COMPACT-NA
Add to cart
Compare
Quick View
JBL Control 1 Pro Surface Mount Speakers
Installed Sound & Others
₹11,999.00
The JBL Control 1 Pro is a compact professional studio monitor speaker that is widely used in recording studios, broadcast studios, and other professional audio environments. It is a popular choice for near-field monitoring, meaning it is designed to deliver accurate sound reproduction at close listening distances.

Here are some key features of the JBL Control 1 Pro:

Design: The Control 1 Pro features a compact and rugged design, making it suitable for desktop or wall-mounting installations. It has a black enclosure with a metal grille to protect the speaker.

Drivers: It has a 5.25-inch low-frequency driver (woofer) and a 0.75-inch high-frequency driver (tweeter). These drivers are designed to provide a balanced and detailed sound reproduction.

Frequency Response: The Control 1 Pro has a frequency response range of 80Hz to 20kHz. This range covers most of the audible spectrum and allows for accurate monitoring of audio content.

Power Handling: It has a power handling capacity of 150 watts peak and 75 watts continuous. This allows for sufficient volume levels and dynamic range in professional audio applications.

Connectivity: The speaker has a standard 5-way binding post input terminal that accepts speaker wire connections. It can be easily connected to audio interfaces, mixers, or amplifiers.

Applications: The Control 1 Pro is suitable for a variety of audio applications, including recording and mixing in small studios, multimedia presentations, broadcast monitoring, and home theater setups.

Accessories: JBL offers optional accessories for the Control 1 Pro, such as wall-mount brackets and adjustable mounting brackets, which enhance flexibility for installation in different environments.

Overall, the JBL Control 1 Pro is known for its accurate sound reproduction, durability, and versatility, making it a reliable choice for professionals and enthusiasts in the audio industry.
Add to cart
Compare
Quick View
JBL Control 23-1 Surface Mount Speakers
Installed Sound & Others
₹22,999.00
Great Sound, Indoors or Out
Experience rich sonic character, wide coverage, and broad frequency response with the JBL Control 23-1 compact speaker. Ideal for retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and more, the Control 23-1 is a piece of cake to mount, and its contemporary design looks great anywhere. Here, we appreciate the versatility of the Control 23-1’s built-in InvisiBall mounting hardware. Indoors or out, the weather-resistant JBL Control 23-1 compact speaker achieves excellent sound quality wherever foreground/background music and/or paging is required.

JBL Control 23-1 Compact Speaker Features at a Glance:

3″ woven fiberglass cone woofer yields excellent low-end response

0.5″ PEI-diaphragm tweeter with fluid cooling delivers great-sounding high frequencies

70Hz-20kHz frequency response for rich, high-fidelity sound

Wide 100-degree x 100-degree coverage fills the entire area with sound

Built-in InvisiBall hardware mounts almost anywhere

Weather-resistant enclosure and transducers

Contemporary design looks great anywhere

Transformer Taps: 70V: 15W, 7.5W, 3.7W, 1.8W; 100V: 15W, 7.5W, 3.7W

Indoors or out, the JBL Control 23-1 compact speaker delivers excellent sound!

Tech Specs

Powered:No

LF Driver Size:3″

HF Driver Size:.5″

Power Rating:100W

Impedance:8 ohms

Inputs:Screw terminal (#6/#8/#10 spade lug or bare wire)

Frequency Range:70Hz – 20kHz

Maximum Peak SPL:103dB

Horizontal Coverage Angle:100 Degrees

Vertical Coverage Angle:100 Degrees

Enclosure Material:High Impact Polystyrene

Mounting Options:Wall Mount (hardware included), Suspended (optional U-bracket)

Height:7.9″

Width:5.6″

Depth:4.4″

Weight:4 lbs.

Manufacturer Part Number:CONTROL 23-1
Add to cart
Compare
Quick View
JBL CBT100LA-1 Line Array Column Speakers
Installed Sound & Others
₹56,999.00
Amazingly Balanced Sound for Any Room or Theater
The JBL CBT 100LA-1 passive speaker uses JBL’s breakthrough Constant Beamwidth Technology to produce a column speaker with incredibly balanced projection across a large area. Passive column speakers normally create inconsistencies in sound when you move about the room, but not the CBT 100LA-1! JBL’s patent-pending design uses an array of 16 full-range 2″ drivers with 325 watts of power capacity, and the result is consistent, natural sound coverage – both horizontally and vertically. You can even tailor the vertical dispersion to optimize the sound to any room! Perfect for large rooms like churches, school auditoriums, and theaters, the CBT 100LA-1 is easy to install as well as easy to optimize for your room. Call us today to find out how you can integrate the JBL CBT 100LA-1 passive speakers into your live sound system!

JBL CBT 100LA-1Passive Speaker at a Glance:
- Innovative design for superior sound coverage
- Perfect for performance and speech
- Easy to install
Innovative design for superior sound coverageThe JBL CBT 100LA-1 handles up to 325 watts of power to drive an array of 16 full-range 2″ speakers. That may not seem like much, but 10 years of research have created a column speaker that uses analog delay beam-forming and amplitude tapering to make sure directivity is even across the CBT 100LA-1’s extended 80Hz-20kHz frequency range. The result is even, balanced sound without frequency lobing inconsistencies as you move around the coverage area. Best of all, you can switch between 40-degree vertical dispersion (for medium-throw coverage in smaller rooms) and 15-degree vertical dispersion (for long-throw coverage in larger rooms).

Perfect for performance and speechAny place you need clear, balanced sound that covers a large area well, the JBL CBT 100LA-1 will deliver. Switchable voicings let the CBT 100LA-1 use a flat frequency response for music playback, as well as a speech mode with a midrange presence boost. It’s ideal for school auditoriums and churches, allowing your message to be heard clearly throughout the room. Anywhere you have a large room that requires lots of coverage without the compromise of dead spots or frequency lobing, the CBT 100LA-1 is ready to perform.

Easy to installJBL’s CBT 100LA-1 column speakers come with a swiveling wall bracket, and also have 10 threaded insert points on the rear of the fiberglass reinforced ABS cabinet. Contractors love how easy it is to install the CBT series, and it’s easy to position them for the maximum coverage in your room. Call us to find out more about how to integrate the CBT 100LA-1 into your sound system!

JBL CBT 100LA-1 Passive Speaker Features:

Passive column speaker for installation with incredibly balanced horizontal and vertical directivity

325W RMS power handling 2 hours continuous operation, 200W RMS power handling 100 hours continuous

80Hz-20kHz frequency range is perfect for both music or speech

Switchable voicing adds a presence boost for speech applications

SonicGuard overload protection prevents distortion

Built-in 70V/100V transformer, and 8 ohm direct capability, for flexible installation

Color: Black

Fill your room with exceptional sound, with the JBL CBT 100LA-1 passive speaker!
Add to cart
Compare
Quick View
JBL CBT50LA-1 Line Array Column Speakers
Installed Sound & Others
₹40,999.00
Amazingly Balanced Sound for Large Rooms
The JBL CBT 50LA-1 passive speaker uses JBL’s breakthrough Constant Beamwidth Technology to produce a column speaker with incredibly balanced projection across a large area. Passive column speakers normally create inconsistencies in sound when you move about the room, but not the CBT 50LA-1! JBL’s patent-pending design uses an array of eight full-range 2″ drivers with 150 watts of power capacity, and the result is consistent, natural sound coverage – both horizontally and vertically. Perfect for large rooms like churches, school auditoriums, and theaters, the CBT 50LA-1 is easy to install as well as easy to optimize for your room. Call us today to find out how you can integrate the JBL CBT 50LA-1 passive speakers into your live sound system!
JBL CBT 50LA-1Passive Speaker at a Glance:

Innovative design for superior sound coverage

Perfect for performance and speech

Easy to install

Innovative design for superior sound coverageThe JBL CBT 50LA-1 handles 150 watts of power to drive an array of eight full-range 2″ speakers. That may not seem like much, but 10 years of research have created a column speaker that uses analog delay beam-forming and amplitude tapering to make sure directivity is even across the CBT 50LA-1’s extended 80Hz-20kHz frequency range. It’s new technology, and the result is even, balanced sound without frequency lobing inconsistencies as you move around the coverage area.

Perfect for performance and speechAny place you need clear, balanced sound that covers a large area well, the JBL CBT 50LA-1 will deliver. Switchable voicings let the CBT 50LA-1 use a flat frequency response for music playback, as well as a speech mode with a midrange presence boost. It’s ideal for school auditoriums and churches, allowing your message to be heard clearly throughout the room. Anywhere you have a large room that requires lots of coverage without the compromise of dead spots or frequency lobing, the CBT 50LA-1 is ready to perform.

Easy to installJBL’s CBT 50LA-1 column speakers come with a swiveling wall bracket, and also have 10 threaded insert points on the rear of the fiberglass reinforced ABS cabinet. Contractors love how easy it is to install the CBT series, and it’s easy to position them for the maximum coverage in your room. Call us to find out more about how to integrate the CBT 50LA-1 into your sound system!

JBL CBT 50LA-1 Passive Speaker Features:

Passive column speaker for installation with incredibly balanced horizontal and vertical directivity

150W RMS power handling 2 hours continuous operation, 100W RMS power handling 100 hours continuous

80Hz-20kHz frequency range is perfect for both music or speech

Switchable voicing adds a presence boost for speech applications

SonicGuard overload protection prevents distortion

Built-in 70V/100V transformer, and 8 ohm direct capability, for flexible installation

Color: Black

Fill your room with exceptional sound, with the JBL CBT 50LA-1 passive speaker!
Tech Specs
- Powered:No
- Speaker Size:8 x 2″
- Power Rating:150W
- Total Power:600W
- Impedance:8 ohms
- Frequency Range:80Hz-20kHz (-10dB)
- Maximum Peak SPL:121dB
- Horizontal Coverage Angle:150 Degrees
- Vertical Coverage Angle:20 Degrees
- Enclosure Material:Fiberglass reinforced ABS cabinet
- Mounting Options:Wall Mount (hardware included), Multiple Fly Points
- Height:20.8″
- Width:3.9″
- Depth:6″
- Weight:9 lbs.
- Manufacturer Part Number:CBT 50LA-1
Add to cart
Compare
Quick View
JBL CBT70J-1 Line Array Column Speakers
Installed Sound & Others
₹97,999.00
Amazingly Balanced Sound for Any Room or Theater
The JBL CBT 70J-1 passive speaker uses JBL’s breakthrough Constant Beamwidth Technology to produce a column speaker with incredibly balanced projection across a large area. Passive column speakers normally create inconsistencies in sound when you move about the room, but not the CBT 70J-1! JBL’s patent-pending design uses an array of four 5″ LF drivers and sixteen 1″ HF drivers, and the result is consistent, natural sound coverage – both horizontally and vertically. You can even tailor the vertical dispersion to optimize the sound to any room! Perfect for large rooms like churches, school auditoriums, and theaters, the CBT 70J-1 is easy to install as well as easy to optimize for your room. Call us today to find out how you can integrate the JBL CBT 70J-1 passive speakers into your live sound system!
Innovative design for superior sound coverage

The JBL CBT 70J-1 handles up to 500 watts of power to drive an array of four 5″ LF drivers and sixteen 1″ HF drivers. 10 years of research have created a column speaker that uses analog delay beam-forming and amplitude tapering to make sure directivity is even across the CBT 70J-1’s extended 60Hz-20kHz frequency range. The result is even, balanced sound without frequency lobing inconsistencies as you move around the coverage area. Best of all, you can switch between 45-degree vertical dispersion (for medium-throw coverage in smaller rooms) and 25-degree vertical dispersion (for long-throw coverage in larger rooms).

Perfect for performance and speech

Any place you need clear, balanced sound that covers a large area well, the JBL CBT 70J-1 will deliver. Switchable voicings let the CBT 70J-1 use a flat frequency response for music playback, as well as a speech mode with a midrange presence boost. It’s ideal for school auditoriums and churches, allowing your message to be heard clearly throughout the room. Anywhere you have a large room that requires lots of coverage without the compromise of dead spots or frequency lobing, the CBT 70J-1 is ready to perform.

Easy to install

JBL’s CBT 70J-1 column speakers come with a swiveling wall bracket, and also have 10 threaded insert points on the rear of the fiberglass reinforced ABS cabinet. Contractors love how easy it is to install the CBT series, and it’s easy to position them for the maximum coverage in your room. Call us to find out more about how to integrate the CBT 70J-1 into your sound system!

JBL CBT 70J-1 Passive Speaker Features:

Passive column speaker for installation with incredibly balanced horizontal and vertical directivity

500W RMS power handling 2 hours continuous operation, 350W RMS power handling 100 hours continuous

60Hz-20kHz frequency range is perfect for both music or speech

Switchable voicing adds a presence boost for speech applications

SonicGuard overload protection prevents distortion
Add to cart
Compare
Quick View
JBL SRX815 Passive Speakers
Passive Speakers
The JBL Professional SRX815 Passive – 15″ Two-Way Bass Reflex Passive System is designed for use as a light-duty main PA, monitor, or rear or side fill. Featuring M10 suspension points and feet for both floor standing and monitor use, the speaker is suitable for musicians, bands, and DJs, concert use, public speaking, or installations such as performance venues, corporate spaces, educational facilities or houses of worship. Tunings and presets are available for Crown ITech HD and XTI 2 amps as well as dbx VENU360 signal processor.

Transducer Technology

Includes JBL’s patented Differential Drive technology using lower-mass ferrite drivers for reduced weight with 3″ voice coils
Key Features
- JBL 15″ Woofer
- Tunings for Crown Amps and dbx Venu360
- 3200W Peak, 1600W Program Power Handling
- 56 Hz to 20 kHz Frequency Response
Read more
Compare
Quick View
JBL SRX812 Passive Speakers
Passive Speakers
The JBL Professional SRX812 Passive – 12″ Two-Way Bass Reflex Passive System is designed for use as a light-duty main PA, monitor, or rear or side fill. Featuring M10 suspension points and feet for both floor-standing and monitor use, the speaker is suitable for musicians, bands, and DJs, concert use, public speaking, or installations such as performance venues, corporate spaces, educational facilities or houses of worship. Tunings and presets are available for Crown ITech HD and XTI 2 amps as well as the dbx VENU360 signal processor.
Transducer Technology

Includes JBL’s patented Differential Drive technology using ferrite drivers with 3″ voice coils
Key Features

JBL 12″ Woofer

Tunings for Crown Amps and dbx Venu360

3200 W Peak, 1600 W Program Power Handling

57 Hz to 20 kHz Frequency Response
Read more
Compare
Quick View
JBL SRX835 Passive Speakers
Passive Speakers
The JBL SRX835 Passive 15″ Three-Way Bass Reflex Passive System is suitable for live performance, mobile and fixed DJ, sound system rental, touring, and permanent installation applications. The system can deliver a frequency response of 41 to 20 kHz (-3 dB) and a maximum SPL of 137 dB.
High frequencies are handled by an annular polymer diaphragm compression driver that features a 3″ voice coil coupled to a 1.5″ throat opening

Using a neodymium magnet, the compression driver delivers high power levels with reduced distortion and increased phase coherence resulting in smooth, crystal clear high frequencies

For low frequencies, the SRX835 uses a 15″ woofer with JBL’s patented Differential Drive Technology for reduced weight while maximizing power amp efficiency

3″ voice coils and dual ferrite drivers deliver low distortion and extended low frequency response

SRX835’s midrange driver is derived from the midrange transducer on the VTX 20 touring line array system

The outside cast aluminum frame acts as the structural support, acoustic cavity, and heat sink for the driver, optimizing both space in the speaker cabinet and the performance of the system at the same time
Read more
Compare
Quick View
JBL SRX818S Passive Subwoofer
Passive Speakers
The JBL Professional SRX818S Passive – 18″ Passive Subwoofer System is designed for concert, touring, or installed applications. With a standard M20 pole cup for use with top boxes, indexed feet for stacking in both standard and cardioid positons, and a maximum SPL of 136 dB, the subwoofer is suitable for musicians, bands, DJs, PA systems, performance venues, corporate spaces, houses of worship, and more. A variety of tunings and presets is available for Crown ITech HD and XTI 2 amps as well as the dbx VENU signal processor.

Transducer Technology

Includes JBL’s patented Differential Drive technology using ferrite drivers with 3″ voice coils
Key Features
- Premium JBL 18″ Transducer
- Tunings for Crown Amps and dbx Venu360
- 2400W Peak, 1200W Program Power Handling
- 45 to 150 Hz Frequency Response
Read more
Compare
Quick View
JBL SRX828S Passive Subwoofer
Passive Speakers
The JBL Professional SRX828S Passive- Dual-18″ Passive Subwoofer System is designed for concert, touring, or installed applications. With indexed feet for stacking in both standard and cardioid positions, 4800W peak-power handling, and a maximum SPL of 141 dB, the subwoofer is suitable for musicians, bands, DJs, PA, performance venues, corporate spaces, houses of worship, and more. The wide stance of the subwoofer is suitable for splaying top boxes. A variety of tunings and presets is available for Crown ITech HD and XTI 2 amps as well as the dbx VENU360 signal processor.

Transducer Technology

Includes JBL’s patented Differential Drive technology using ferrite drivers with 3″ voice coils
Key Features
- 2x Premium JBL 18″ Transducers
- Tunings for Crown Amps and dbx Venu360
- 4800W Peak, 2400W Program Power Handling
- 45 to 150 Hz Frequency Response
Read more