Mackie India Authorized Dealer- Buy Mackie Products Online India- Page 4 of 5 - Electronic Emporium | Mumbai | New Delhi | Chennai| Bangalore | Kolkata| Hyderabad | Pune | Goa | Nashik | Nagpur | Kochi | Shillong | Darjeeling | Surat | Vadodara | Ahmedabad | Lucknow | Udaipur | Jodhpur| Jaipur | Chandigarh | Varanasi | Agra | Patna | Vishakhapatnam | Kanpur | Indore | Bhopal | Coimbatore | Guwahati | Mysore | Srinagar | Dehradun | Gurgaon | Shimla | Mangalore | Noida | Jamshedpur | Aurangabad

Showing 37–48 of 51 results

Compare
Quick View
Mackie Thump 215 Powered Speaker
Powered Speakers
₹41,999.00
A New Spin on the Classic Thump Formula
Mackie’s next generation of Thump loudspeakers is redesigned from the ground up to provide you with enhanced power and utility, all at a wallet-friendly price! The Thump215 loudspeaker’s ultra-efficient 1,400-watt class-D amplifier pushes plenty of air through the high-performance 15-inch woofer — a design that live sound pros find is more than capable of handling most small- to medium-sized venues. Next, the 1-inch compression driver ensures that your sound is evenly dispersed, allowing the entire crowd to hear your music with crystal-clear quality. There’s even a built-in feedback eliminator to keep everything noise- and rumble-free! Plus, the Thump215 is loaded with flexible I/O power, boasting a versatile 2-channel design that can be set up for music ducking, allowing this loudspeaker to extend its utility outside of standard musical applications into the world of public address and education. Finally, like all Mackie products, the Thump215 is built tough to withstand the rigors of the road, and the unloading crew is sure to appreciate the lightweight 34-pound form factor.
Ultra-efficient class-D power

The Mackie Thump215’s ultra-efficient class-D amplification kicks out a powerful sound that defies this loudspeaker’s modest size! A 15-inch woofer dishes out plenty of low-end punch, and the 1-inch compression driver ensures that your sound is evenly dispersed across the entire venue. Lastly, Mackie’s built-in feedback eliminator all but eradicates unwanted speaker screech and rumble, maximizing your sonic potential and ensuring that your show runs smooth from start to finish.

Portable design for easy setup and transport

Weighing in at less than 35 pounds, the Thump215 is compact and lightweight, making it easy to transport. The Thump215’s small and portable size will ensure that you won’t need a road crew to mount it on a pole or pack it into your car. What’s more, the Thump215 is housed in a super-tough road-ready enclosure, so don’t think that its light weight makes it fragile!

Mackie Thump215 1,400-watt Powered Loudspeaker Features:

1,400W of class-D amplification is more than loud enough for most small- to medium-sized venues

15-inch woofer and 1-inch compression driver deliver a full-range sound with plenty of low end

Flexible I/O, versatile 2-channel design, and a through output for a wide range of configurations

Music ducking mode is ideal for public address and education settings

Angled design is perfect for floor monitoring, but can also be mounted on a standard pole setup

Lightweight 34-pound design offers effortless portability

Signature Mackie durability to withstand the rigors of the road

Built-in feedback eliminator reduces unwanted screech and rumble

Tech Specs

Powered:Yes

Channels:2-channel mixer

LF Driver Size:15″ high-performance woofer

HF Driver Size:1″ compression driver

Total Power:1400W

Inputs:2 x XLR-1/4″ combo, 1 x 1/8″ TRS

Outputs:1 x XLR

Frequency Response:40Hz-20kHz

Maximum Peak SPL:129dB SPL

Mounting Options:Standard pole mount, Floor Wedge

Power Source:Standard IEC AC cable

Height:22″

Width:17.4″

Depth:14″

Weight:34.8 lbs.

Manufacturer Part Number:2053502
Add to cart
Compare
Quick View
Mackie Thump 215XT Powered Speakers
Powered Speakers
₹49,999.00
A New Spin on the Classic Thump Formula
Mackie’s next generation of Thump loudspeakers is redesigned from the ground up to provide you with enhanced power and utility, all at a wallet-friendly price! The Thump215XT Enhanced loudspeaker’s ultra-efficient 1,400-watt class-D amplifier pushes plenty of air through the high-performance 15-inch woofer — a design that live sound pros find is more than capable of handling most small- to medium-sized venues. Next, the 1-inch compression driver ensures that your sound is evenly dispersed, allowing the entire crowd to hear your music with crystal-clear quality. There’s even a built-in feedback eliminator to keep everything noise- and rumble-free! Plus, the Thump215XT is loaded with flexible I/O power, boasting a versatile 2-channel design that can be set up for music ducking, allowing this loudspeaker to extend its utility outside of standard musical applications into the world of public address and education. Finally, the Thump215XT’s Bluetooth compatibility gives you access to effortless music streaming, speaker linking, and enhanced parameter control via the Thump Connect 2 mobile app.
Four voicing modes and Bluetooth compatibility

No matter what live sound environment you’re in, the Thump 215XT’s four application-specific voicing modes have you covered! Music, Live, Club, and Monitor modes optimize your system to excel in any type of venue, and there’s even an Indoor/Outdoor mode setting if you’re looking to take your band’s sound to an outside gig. If you’re after even greater sonic control, then the Thump215XT’s Bluetooth connectivity allows you to stream, link speakers, and access additional sound-shaping features like system EQ, levels, mutes, and much more via the Thump Connect 2 app.

Ultra-efficient class-D power

The Mackie Thump215XT’s ultra-efficient class-D amplification kicks out a powerful sound that defies this loudspeaker’s modest size! A 15-inch woofer dishes out plenty of low-end punch, and the 1-inch compression driver ensures that your sound is evenly dispersed across the entire venue. Lastly, Mackie’s built-in feedback eliminator all but eradicates unwanted speaker screech and rumble, maximizing your sonic potential and ensuring that your show runs smooth from start to finish.

Portable design for easy setup and transport

Weighing in at 35-pounds, the Thump215XT is compact and lightweight, making it easy to transport. The Thump215XT’s small and portable size will ensure that you won’t need a road crew to mount it on a pole or pack it into your car. What’s more, the Thump215XT is housed in a super-tough road-ready enclosure, so don’t think that its light weight makes it fragile!

Mackie Thump215XT Enhanced 1,400-watt Powered Loudspeaker Features:

1,400W of class-D amplification is more than loud enough for most small- to medium-sized venues

15-inch woofer and 1-inch compression driver deliver a full-range sound with plenty of low end

Flexible I/O, versatile 2-channel design, and a through output for a wide range of configurations

Music ducking mode is ideal for public address and education settings

Angled design is perfect for floor monitoring, but can also be mounted on a standard pole setup

4-application specific voicing modes with Indoor/Outdoor modes to excel in any situation

Bluetooth connectivity allows for music streaming and effortless linking of speakers

Thump Connect 2 App gives you access to enhanced sound-shaping and utility controls

Lightweight 35-pound design offers effortless portability

Signature Mackie durability to withstand the rigors of the road

Built-in feedback eliminator reduces unwanted screech and rumble

Tech Specs

Powered:Yes

Channels:2-channel mixer

LF Driver Size:15″ high-performance woofer

HF Driver Size:1″ compression driver

Total Power:1400W

Inputs:2 x XLR-1/4″ combo, 1 x 1/8″ TRS

Outputs:1 x 1/4″

Bluetooth:Yes

Wireless:Bluetooth

Frequency Response:40Hz-20kHz

Maximum Peak SPL:129dB SPL

Software:Thump Connect 2 App

Mounting Options:Pole Mount, Floor Wedge, M10 flypoints

Power Source:Standard IEC AC cable

Height:27″

Width:17.4″

Depth:14″

Weight:35.1 lbs.

Manufacturer Part Number:2053511
Add to cart
Compare
Quick View
Mackie Thump Go Portable PA System
Portable PA Systems
₹41,999.00
Take this Durable Loudspeaker On the Go

The Mackie Thump GO 8-inch Portable Battery-powered Loudspeaker delivers the full, well-balanced projection of a Mackie loudspeaker in a lighter-weight package for easier on-the-go use. An 8-inch custom high-output woofer pairs with a 1-inch compression driver to provide powerful audio with incredible dynamic range, ensuring a full bass sound with hard-cutting treble. The Thump GO is powered by a removable lithium-ion battery with up to 12 hours of life; a tri-color battery life indicator ensures you can reliably keep the tunes playing all day long. You can stream music from any device with its Bluetooth connectivity, link to another Thump GO for maximum playback, and control everything via the Thump GO Connect app. Here , we love the smart capabilities of the Thump GO’s 2-channel digital mixer with XLR outputs, including “Music Ducking mode” to automatically lower channel two when channel one receives signal. With four application-specific speaker modes and indoor/outdoor voicing modes, as well as a built-in pole mount, you can also take your Thump GO setup outside. Rest it on the ground with ease at its 45-degree monitor angle, knowing that its durable molded enclosure and rugged powder-coated steel grille will keep it protected. Whether you’re looking to stream music or set up a PA, the Thump GO is your lightweight, portable loudspeaker solution for any larger indoor or outdoor space.
Mackie Thump GO 8-inch Portable Battery-Powered Loudspeaker Features:
- Ultra-efficient Class-D amplifier with lightweight (17.6-pound) design
- Dimensions: 18 inches (H) x 9.1 inches (W) x 11.2 (D) inches
- 8-inch custom high-output woofer with 1-inch compression driver for full, even projection
- Removable lithium-ion battery with 12 hours of life; tri-colored battery life indicator
- Bluetooth connectivity with linking for a second Thump GO and easy streaming control via the Thump GO Connect App
- 2-channel digital mixer with XLR output and gain balance for PA use
- 4 application-specific speaker modes; indoor/outdoor voicing modes
- Smart input and thermal limiters; “Music Ducking mode” for automatically lowering Ch. 2 level when Ch.1 receives signal
- Great for outdoor spaces with built-in pole mounts
- Durable lightweight molded enclosure, powder-coated steel grille, and 45° resting monitor angle
Tech Specs
- Powered:Yes
- Power Configuration:Bi-amped
- Channels:2-channel mixer
- LF Driver Size:8″ Woofer
- HF Driver Size:1″ Compression Driver
- LF Driver Power Amp:175W Peak
- HF Driver Power Amp:25W Peak
- Total Power:200W Peak Class D
- Inputs:2 x XLR-1/4″ TRS combo
- Outputs:1 x XLR (thru)
- Bluetooth:5.0
- Wireless:Bluetooth
- Frequency Response:50Hz-20kHz (-10dB), 57Hz-20kHz (-3dB)
- Crossover Frequency:2.2kHz
- Maximum Peak SPL:115 dB SPL
- Horizontal Coverage Angle:90°
- Vertical Coverage Angle:60°
- Signal Processing:4 Speaker Modes, Outdoor Mode, Music Ducking, Feedback Eliminator
- Software:Thump Connect 2 App
- Enclosure Material:Polypropylene Plastic with Black Textured Surface, Powder-coated Grille
- Mounting Options:Pole
- Power Source:Standard IEC AC cable, Lithium-ion Battery
- Height:18″
- Width:9.1″
- Depth:11.2″
- Weight:17.6 lbs.
- Manufacturer Part Number:2053605-00
Add to cart
Compare
Quick View
Behringer X-Touch Universal Control Surface
Analog Mixing Consoles
₹63,999.00
Amazing Controller for Studio or Live Sound

The Behringer X-Touch is the perfect way to control your DAW in your studio, and it’s an amazing way to control your X32 digital mixer remotely, too. An integrated Ethernet interface lets you connect to and control any of Behringer’s X32 series mixers. Engineers know that nothing beats the fast workflow of a comprehensive control surface. With 100mm motorized faders, digital scribble strips, color-coded LEDs and displays, and much more, the Behringer X-Touch is simply an outstanding USB/MIDI control surface for practically any application.
Supports HUI and Mackie Control for near-universal compatibility

You need a control surface that allows you to make high-precision changes to your DAW, instruments, and effects with a minimum of hassle. The X-Touch supports HUI and Mackie Control protocols to work with virtually any professional audio production software imaginable. As soon as you take the X-Touch out of its box, you can plug into a spare USB port and start tweaking — no setup required!

Touch-sensitive motorized faders allow for precise, dynamic control

Getting your hands on faders has always been the preferred way to mix. That’s why the X-Touch boasts nine fully automated and touch-sensitive 100mm motorized faders that respond to your every movement with amazing accuracy. With the X-Touch control surface, all the automation you write is reflected in the movements of each fader in real time, in perfect sync with your DAW. You’ll never have to adjust faders to match their on-screen values in your DAW, giving you the feel of mixing through a real console.

Easy to find any parameter — and tweak it fast

The X-Touch’s eight rotary controls with LED-collars, in addition to its 92 illuminated buttons and eight LCD scribble strips, give you immediate visual feedback of your parameters. Just by looking at the X-Touch, you’ll know if a channel is muted or soloed or where your levels are as you make changes during recording or mixing. You’ll be able to navigate to any track you need in seconds, even when you’re working with high track counts. With the X-Touch, you’ll be able to arm multiple tracks and adjust panning at the same time. Try doing that with a keyboard and mouse!

Behringer X-Touch Features:

Comprehensive control surface for your DAW or X32 series digital mixer

Touch-sensitive 100mm motorized faders allow for precise, dynamic control

Mackie Control and HUI modes for seamless integration with a plethora of music production software

Rotary controls with LED-collars and illuminated buttons for on-the-fly adjustments

Smooth jog wheel makes it easy to navigate your session or other creative control

Color-coded LCD scribble strips make it easy to identify any track

Ethernet interface for Real-time Protocol MIDI and X32 series remote control

Pre-configured control elements for instant operation out of the box

USB and 5-pin MIDI integration for interfacing with more devices

2-port USB hub for connecting external devices such as keyboard controllers and dongles

Dual footswitch connectors and foot controller input provide external remote control

Tech Specs

Type:DAW remote controller

Faders:9 x 100mm (Motorized)

Transport Controls:Yes

Encoders/Pots:8 x Rotary with LEDs

Soft Keys:92 key function illuminated buttons

Analog Inputs:2 x 1/4″ (footswitch), 1 x 1/4″ (external controller)

Computer Connectivity:2 x USB Type A, 1 x USB Type B

MIDI I/O:In/Out/USB

Data I/O:1 x Ethernet remote jack

OS Requirements – Mac:OS X 10.7 or later

OS Requirements – PC:Windows 7 or later

Height:3.9″

Width:17.8″

Depth:11.9″

Manufacturer Part Number:000-B1X02-00010
Read more
Compare
Quick View
Mackie Big Knob Passive Monitor Controller
Studio Monitors
₹6,999.00
High Quality Monitor Control for Smaller Studios

The Mackie Big Knob Passive monitor controller provides switching between two sets of inputs and two sets of studio monitor speakers. Passive circuitry means your audio signal will remain true to its source, while a large volume knob makes it easy to make level adjustments while you’re mixing. Handy buttons for Mono, Mute and Dim put necessary monitoring functions at your fingertips. The original Big Knob has been a popular solution for years, and with upgraded circuitry and a streamlined control set, the Mackie Big Knob Passive is an ideal monitor controller for project studios.

Mackie Big Knob Passive Monitor Controller Features:

Passive studio monitor controller

Passive electronics for ultra-low noise and maximum signal integrity

Connect two sets of inputs and easily switch between them

Supports two pairs of studio monitor speakers

Large volume knob for easy level adjustments

Handy buttons for Mono, Mute, and Dim

Tech Specs

Input Channels:2 x stereo sources

Output Channels:2 x stereo monitors

Analog Inputs:4 x 1/4″ TRS, 1 x 1/8″ (line in)

Analog Outputs:4 x 1/4″ TRS

Form Factor:Desktop

Power Supply:Passive

Height:3.1″

Width:5.4″

Depth:5.6″

Weight:2.2 lbs.

Manufacturer Part Number:2047800-00
Add to cart
Compare
Quick View
Mackie Big Knob Studio Monitor Controller and Interface
Studio Monitors
₹22,999.00
Mackie Big Knob Studio:Your One-stop Studio Solution for Recording and Monitoring

Combining comprehensive control over your studio monitors with a high-resolution USB audio interface, the Mackie Big Knob Studio delivers big value for project studios. Dedicated buttons on the Mackie Big Knob Studio allow you to switch between three input sources and two pairs of speakers, with trim controls on the speaker outs to balance the volume of different sets of monitors. And with two Onyx mic preamps onboard, two headphone outputs, and Talkback functionality, the Mackie Big Knob Studio interface and monitor controller is a complete recording and monitoring solution.

Enjoy comprehensive connectivity for recording and monitoring with Mackie Big Knob Studio

There’s a lot you can do with the Mackie Big Knob Studio. As an audio interface you can record two channels of high-fidelity, low-noise audio, courtesy of dual Onyx mic preamps. A Direct Monitoring option allows for no-latency recording, and built-in headphone outs are ready for artist monitoring.You know the importance of reliable studio communication. With built-in talkback functionality, you’ll be able to communicate easily with your artists. A stereo aux input on the front panel makes it easy for artists to plug in a music player to hear a reference track. And of course, you have complete control over input source and monitor switching. For the cost of a typical USB audio interface, the Mackie Big Knob Studio offers much more.

Mackie Big Knob Studio Monitor Controller/USB Audio Interface Features:

Studio monitor controller and USB audio interface

Dual Onyx preamps for recording high-fidelity, low-noise audio

Easily switch between three input sources and two monitor pairs

Trim controls allow you to balance the volume of different pairs of monitors

Talkback for communicating with artists

Headphone outputs for artist monitoring

Stereo aux input for connecting music player for reference tracks

Large volume knob for easy level adjustments

Handy buttons for Mono, Mute, and Dim

Tech Specs

Input Channels:3 x sources

Output Channels:2 x stereo monitors

Analog Inputs:2 x 1/4″ TRS (line), 2 x XLR-1/4″ combo (mic), 1 x 1/8″ (aux in)

Analog Outputs:4 x 1/4″ (monitors A/B), 2 x 1/4″ (2-track)

Headphones:2 x 1/4″

USB:1 x Type B

Computer Connectivity:USB

Talkback:Built-in

A/D Resolution:Up to 24-bit/192kHz

Software:Traktion

Compatibility:Mac, Windows

Form Factor:Desktop

Power Supply:18V DC power supply (included)

Height:3.2″

Width:9.9″

Depth:6.4″

Weight:3.5 lbs.
Add to cart
Compare
Quick View
Mackie HM-400 4-Channel Headphone Amplifier
Headphones and Earphones
₹19,999.00
High-performance Headphone Amplification
Searching for an easy way to increase the monitoring capacity of your studio? Look no further than the Mackie HM-400. This 4-channel headphone amplifier boasts three outputs per channel for a total of 12 headphone outputs. Each channel contains an aux input, along with a balance control to mix your main and aux signals. Four independent aux inputs supply up to eight individual stereo mixes. You also get Stereo/2-channel Mode switches along with 7-segment LED meters on each channel. Premium analog circuitry ensures super-high headroom and a low noise floor, while a heavy-gauge steel chassis and long-wear potentiometers and switches provide extreme durability. The HM-400 delivers high-performance headphone amplification that’s sure to become an invaluable asset in your studio.
Premium analog circuitry delivers top-notch sound

No matter what you’re recording, the HM-400 will deliver studio-quality sound, and premium analog circuitry ensures maximum headroom and low noise. Here, we’re impressed by just how great this headphone amplifier sounds — especially at this price.

Built-Like-A-Tank design withstands day-to-day abuse

The HM-400 can endure a great deal of punishment, thanks to Mackie’s Built-Like-A-Tank construction. The HM-400 features a heavy-gauge steel chassis, along with long-wear potentiometers and switches. This is one piece of studio gear that’s clearly built to last.

Mackie HM-400 Features:

Rackmount 4-channel headphone amplifier

3 outputs per channel for a total of 12 headphone outputs

Each channel contains an aux input and a balance control to mix your main and aux signals

L/R stereo inputs plus L/R stereo outputs

Stereo/2-channel Mode switches on each channel

7-segment LED meters on each channel

Premium analog circuitry ensures super-high headroom and a low noise floor

Heavy-gauge steel chassis and long-wear potentiometers and switches provide extreme durability

Tech Specs

Type:Headphone Amp

Input Channels:4

Output Channels:4 (3 outs per channel)

Analog Inputs:2 x 1/4″ (main L/R rear), 1 x 1/4″ (main front), 2 x XLR (main L/R), 4 x 1/4″ (aux in)

Analog Outputs:2 x 1/4″ (main L/R), 2 x XLR (main L/R)

Headphones:12 x 1/4″ (8 x rear, 4 x front)

Controls per Channel:Balance, Bass, Treble, Output

Form Factor:Rackmount

Power Supply:Standard IEC AC cable

Height:1.8″

Width:19″

Depth:8.8″

Weight:8 lbs.
Add to cart
Compare
Quick View
Mackie HM-800 8-Channel Headphone Amplifier
Headphones and Earphones
₹24,599.00
High-performance Headphone Amplification
Searching for an easy way to increase the monitoring capacity of your studio? Look no further than the Mackie HM-800. This 8-channel headphone amplifier boasts two outputs per channel for a total of 16 headphone outputs. Eight independent aux inputs supply up to eight individual stereo mixes. You also get Input Select and Stereo/Mono switches, along with 7-segment LED meters, on each channel. Premium analog circuitry ensures super-high headroom and a low noise floor, while a heavy-gauge steel chassis and long-wear potentiometers and switches provide extreme durability. The HM-800 delivers high-performance headphone amplification that’s sure to become an invaluable asset in your studio.
Premium analog circuitry delivers top-notch sound

No matter what you’re recording, the HM-800 will deliver studio-quality sound. Premium analog circuitry ensures maximum headroom and low noise. Here, we’re impressed by just how great this headphone amplifier sounds — especially at this price.

Built-Like-A-Tank design withstands day-to-day abuse

The HM-800 can endure a great deal of punishment, thanks to Mackie’s Built-Like-A-Tank construction. The HM-800 features a heavy-gauge steel chassis, along with long-wear potentiometers and switches. This is one piece of studio gear that’s clearly built to last.

Mackie HM-800 Features:

Rackmount 8-channel headphone amplifier

2 outputs per channel for a total of 16 headphone outputs

8 independent aux inputs supply up to 8 individual stereo mixes

2 discrete main stereo inputs with individual level controls plus stereo pass-through outputs

Input Select and Stereo/Mono switches on each channel

7-segment LED meters on each channel

Premium analog circuitry ensures super-high headroom and a low noise floor

Heavy-gauge steel chassis and long-wear potentiometers and switches provide extreme durability

Tech Specs

Type:Headphone Amp

Input Channels:2 x stereo main, 8 x aux

Output Channels:8 stereo channels

Analog Inputs:4 x 1/4″ (2 x stereo), 8 x 1/4″ (aux in)

Analog Outputs:4 x 1/4″ (2 x stereo)

Headphones:16 x 1/4″ TRS (8 x front, 8 x rear)

Controls per Channel:Output per Channel, Main 1 Volume, Main 2 Volume

Form Factor:1U Rackmount

Power Supply:Standard IEC AC cable

Height:1.8″

Width:19″

Depth:8.8″

Weight:8 lbs.
Add to cart
Compare
Quick View
Mackie MCU Pro Universal Control Surface
Analog Mixing Consoles
₹99,999.00
Get Hands-on Control over Your DAW
The Mackie MCU Pro control surface completes your music production software by giving you ultimate hands-on control of your mix. Nine motorized, touch-sensitive Alps faders, eight V-Pots, and more than 50 master buttons let you tweak parameters to your heart’s content. Unlike generic MIDI controllers, the MCU Pro employs a sophisticated communication protocol that delivers ultra-precise control, makes setup easy (no mapping required), and enables you to see your mix in action with real-time visual feedback via the huge backlit LCD and eight LED rings.

Mackie MCU Pro Expandable Workstation Control Surface at a Glance:
- Touch-sensitive control surface for real-console feel and analog vibe
- Proprietary communication protocol for easy software integration
- MIDI interface for direct connection to your computer and external MIDI gear
Touch-sensitive control surface for real-console feel and analog vibe
The Mackie MCU Pro’s 100mm touch-sensitive Alps motorized faders give you accurate, smooth, real-console feel, bringing the hands-on vibe of analog to your state-of-the-art DAW productions. The same fader set is also featured on the seamlessly integrated Mackie XT Pro expansion module, which also shares the same channel strip functions.

Proprietary communication protocol for easy software integration
Mackie’s proprietary communication protocol lets you get the most out of your software, giving you precise control over setups and control surface assignments – no mapping required! In addition to the unit’s versatile faders and more than 50 dedicated buttons, accurate V-Pot rotary encoders allow you to manipulate software, plug-in effects, and virtual instruments. And the backlit LCD lets you easily monitor your mixes in real time.

MIDI interface for direct connection to your computer and external MIDI gear
An onboard USB MIDI interface is included for direct connection to a Mac or PC computer, as well as up to three additional pieces of external MIDI gear (with even more control capability when integrated with the Control C4 Pro expansion module). Software-specific Lexan overlays are also included, allowing the MCU Pro to be easily adapted to your DAW.

Mackie MCU Pro Expandable Workstation Control Surface Features:
- Expandable touch-sensitive control surface with 100mm Alps motorized faders
- Proprietary Mackie communication protocol for seamless music production software integration
- V-Pot control over software, plug-in effects, and virtual instruments
- More than 50 dedicated buttons for fine control of software parameters
- Tape-style transport controls
- Full meter display with track names and parameters
- Quick cursor-style Up, Down, Left, Right, and Zoom buttons
- Onboard USB MIDI interface for direct connection to a Mac or PC computer and up to 3 additional pieces of external MIDI gear
- Software-specific Lexan overlays included
- Expandable via optional Mackie XT Pro and Control C4 Pro modules
- Newer, better-feeling jog wheel
- Skinnier side cheeks (looks more like a console when expanded)
- New metal casing and new industrial design
Take control of your mix with Mackie’s MCU Pro!
Tech Specs
- Type:Control Surface
- Faders:9 x 100mm (Touch Sensitive, Motorized)
- Transport Controls:Yes
- Encoders/Pots:8 x Rotary encoders
- Soft Keys:118 dedicated soft keys, 8 assignable soft keys
- Computer Connectivity:USB
- MIDI I/O:In/Out/USB
- Other I/O:2 x Footswitch
- Height:4.4″
- Width:16.5″
- Depth:16.9″
- Weight:16.8 lbs.
Add to cart
Compare
Quick View
Mackie MCU XT Pro Universal Control Service Extender
Analog Mixing Consoles
₹67,999.00
Expand Your MCU Pro with More Faders

The Mackie XT Pro is a control surface extender that expands your Mackie MCU Pro unit with the addition of eight motorized, touch-sensitive Alps faders, plus V-Pot rotary encoders and push-buttons on every channel strip. The Mackie XT Pro module attaches seamlessly to the MCU Pro unit, integrating with all the main control surface’s functions and commands without the need for any external hardware. You can expand your MCU Pro’s ability to control your DAW even further with the addition of the Mackie XT Pro.

Mackie XT Pro Control Surface Extension Module at a Glance:
- Smooth fader control
- Multi-function knobs and buttons on each channel strip
- Seamless integration with MCU Pro
Smooth fader control
The Mackie XT Pro features the same 100mm touch-sensitive Alps motorized faders as the MCU Pro control surface. These smooth faders give you the tactile, responsive feel of an analog console while accurately commanding your state-of-the-art DAW software.

Multi-function rotary encoders and buttons
Each of the Mackie XT Pro’s eight channels features a multi-function V-Pot for fast and accurate control of panning, effects levels, and more. Also included on each channel strip are mute, solo, pan, send level, and record arm functions, as well as a full meter display.

Seamless integration with the MCU Pro
The Mackie XT Pro is literally the “right hand man” of the Mackie Control Universal Pro control surface. Once connected, it’s seamlessly integrated into the system, so all parameters, automation, and other control commands are communicated in concert with the rest of the system – no external hardware required!

Mackie XT Pro Features:
- Eight-Fader Control Surface Extension for MCU Pro
- Proprietary Mackie communication protocol for seamless software integration by DAW makers
- 100mm touch-sensitive optical Alps motorized faders
- Multi-function V-Pots for fast control of panning, effects levels and more
- Channel mute, solo, pan, send level and record arm functions
- Full meter display with track names and parameters
Mackie XT Pro – Customize your MCU Pro to meet your needs!

Tech Specs
- Type:Fader expansion for Mackie MCU Pro
- Faders:8 x 100mm (Touch Sensitive, Motorized)
- Encoders/Pots:8 x Rotary encoders
- Soft Keys:32 dedicated soft keys
- MIDI I/O:In/Out
- Height:4.4″
- Width:10.1″
- Depth:16.9″
- Weight:11 lbs.
Add to cart
Compare
Quick View
Mackie DRM212 Powered Speakers
Powered Speakers
₹68,999.00
World-class Sound and No-fuss Setup

Putting together a great-sounding PA system is a breeze — if you have a Mackie DRM212, that is. This state-of-the-art active PA speaker is loaded with 1,600 watts of power and innovative DSP to ensure top-notch sound. It’s built for demanding live performances, with custom high-sensitivity transducers and a roadworthy, texture-coated 18mm plywood cabinet. Beyond that, the DRM212 is a breeze to set up, thanks to Mackie’s DRM Control Dashboard, which features a high-contrast, full-color display on the speaker’s back panel. For world-class sound and no-fuss setup, you can’t beat Mackie’s DRM212.
Top-shelf construction offers world-class sound

Because of its top-shelf construction, the DRM212 offers world-class sound. Its 1.4″ titanium-diaphragm compression driver was designed especially for its amplifier, ensuring maximum clarity and transparency. Its 12″ high-excursion woofer delivers exceptional sensitivity, bass response, and reliability — whatever your application, the DRM212 can tackle it. Enjoy smooth yet punchy low-frequency response thanks to a unique ported design. Experience peak performance while avoiding blowouts courtesy of next-gen protection circuitry. Benefit from optimal acoustic performance by virtue of roadworthy 18mm plywood construction and internal bracing. Beyond that, a dual-angle pole mount yields optimal coverage and minimal reflections.

Loaded with advanced features

The DRM212 is packed with innovative technology, including Impulse DSP for peak performance. Experience reference-quality sound all throughout its entire frequency range thanks to precision crossovers, while linear-phase FIR filtering minimizes inherent anomalies, phase issues, and muddy midrange for crystal-clear sound. Dual independent inputs support mic, line, and instrument signals, plus a dedicated 1/8″ stereo aux input. Setup is a snap, courtesy of venue-specific modes with easy-to-use voicings for live, monitor, club, and sub applications. You also get an adjustable 3-band parametric EQ for further customization and tuning, along with an Alignment Delay control for delay stacks. Save and recall up to six user presets, and benefit from Mackie’s DRM Control Dashboard, which includes a high-contrast, full-color display and quick, 1-knob access to configuration, processing, and more. Here, we’ve found that the DRM212 has all the features that we demand — and then some.

Mackie DRM212 Active PA Speaker Features:
- State-of-the-art active PA speaker
- 1.4″ titanium-diaphragm compression driver ensures maximum clarity and transparency
- 12″ high-excursion woofer delivers exceptional sensitivity, bass response, and reliability
- Loaded with Impulse DSP for peak performance
- Precision crossovers yield reference-quality sound throughout the entire frequency range
- Linear-phase FIR filtering minimizes inherent anomalies, phase issues, and muddy midrange
- Dual independent inputs support mic, line, and instrument signals, plus a dedicated 1/8″ stereo aux input
- Mackie’s DRM Control Dashboard ensures ease of use and simplified setup
- Venue-specific modes with easy-to-use voicings for live, monitor, club, and sub applications
- Adjustable 3-band parametric EQ for further customization and tuning
- Alignment Delay control for delay stacks
- Save and recall up to 6 user presets
- High-contrast, full-color display and 1-knob access to configuration, processing, and more
- Next-gen protection circuitry prevents blowouts
- Dual-angle pole mount yields optimal coverage and minimal reflections
- Roadworthy, texture-coated 18mm plywood cabinet
Tech Specs
- Powered:Yes
- Power Configuration:Single Amp
- LF Driver Size:12″ woofer
- HF Driver Size:1.4″ Titanium compression driver
- LF Driver Power Amp:1600W Class D
- Total Power:1600W
- Inputs:1 x 1/8″ aux, 2 x Mic/Line/Instrument
- Outputs:2 x 3-pin XLR Direct, 1 x 3-pin XLR Mix
- Frequency Range:45Hz-20khz (-10 dB)
- Maximum Peak SPL:134dB
- Signal Processing:DSP Presets, 3-band EQ, Compression, Delay
- Enclosure Material:15mm Texure-coated plywood, Powder-coated heavy gauge steel grille
- Mounting Options:Dual angle Pole-mount, 8 x M10 flypoints
- Power Source:Standard IEC AC cable
- Height:25″
- Width:14.7″
- Depth:16.2″
- Weight:42 lbs.
Add to cart
Compare
Quick View
Mackie ProFX16v3 Analog Mixing Console
Analog Mixing Consoles
₹41,999.00
Robust Mixer that’s Ready for the Stage or the Studio
Looking for a mixer that makes your life easier when you’re gigging? The Mackie ProFX16v3 16-channel USB mixer can do that and much, much more. The ProFX16v3 provides you with great sound and features found in larger mixers while remaining portable. This mixer is equipped with 11 Onyx preamps that provide top-notch sound for your keyboard, mics, and guitars. Once you’re ready to go, you can use the onboard GigFX to add that little something extra to your mix. No matter if you’re onstage or in your studio, the Mackie ProFX16v3 will always give you amazing audio quality.
Everything you need in one device

Here, we want to make sure that your gig sounds the way you want it to. That’s why we’re excited to tell you more about what the Mackie ProFX16v3 can really do. Each channel starts with Mackie’s Onyx preamp. Then you can use the 100Hz low cut control to keep your sound clean. Next, you can dial up to 60dB of gain before sending it through onboard compression and 3-band EQ. Every channel is equipped with FX level controls and a mute button. What’s more, every mic input is equipped with 48V phantom power.

Improved digital effects

To make sure that you sound perfect, the Mackie ProFX16v3 has an onboard effects processor. The effects processor has a blend function, FX level control, and a quick mute switch. The GigFX effects engine offers up 24 different effects ranging from delays, reverbs, choruses, distortion, and even an auto-wah feature. All of these effects are accessed by a simple twist of the Presets knob.

Exceptional build quality

Mackie mixers have been a mainstay for studio and live sound for many reasons. Chief among these reasons is durability and build quality. You’ll find these mixers in venues across the country covered in years of dust and grime. But when you power them up, they deliver top-notch sound and reliability. If you’ve never owned a Mackie before, you’ll be surprised by its sturdy construction. Seriously, your Mackie Mixer will stand up to whatever punishment you give it without batting an eye.

Mackie ProFX16v3 Professional Effects USB Mixer Features:

GigFX effects engine delivers 24 effects including reverbs, delays, and choruses

11 Mackie Onyx mic preamps deliver clear signal and 60dB of gain

Rugged design will stand up to the wear and tear of the road

3 Band EQ and 100Hz low-cut filter on all channels

Built-in channel compression

48-volt phantom power on all mic channels

24-bit/192kHz A/D for unmatched audio quality

USB for playback music and recording into your computer

Balanced XLR and balanced/unbalanced outputs

Headphone output has separate volume control for comfortable monitoring

Tech Specs

Type:Analog Mixer with USB Interface

Channels:16 (8 x mono, 4 x stereo)

Computer Connectivity:USB (2 x 4)

A/D Resolution:24-bit/192kHz

Faders:16 x 60mm Faders

Inputs – Mic Preamps:2 x XLR-1/4″ combo (mic/line/Hi-Z), 9 x XLR (mic)

Phantom Power:Yes

Inputs – Line:6 x 1/4″, 6 x 1/4″ (3 x stereo), 1 x 1/8″ (stereo)

Outputs – Main:2 x XLR, 2 x 1/4″ (L/R), 2 x 1/4″ (control room)

Outputs – Other:4 x 1/4″ (subgroup out)

Aux Sends:1 x FX Send (post), 2 x Monitor Send (pre), 1 x Monitor Send (pre/post)

Send/Return I/O:1 x 1/4″ (FX send), 3 x 1/4″ (monitor send)

Busses/Groups:2 x Subgroup

Inserts:8 x 1/4″ (channel)

Headphones:1 x 1/4″

USB:1 x Type B

Other I/O:1 x 1/4″ (footswitch)

EQ Bands:3-band EQ with Variable Mid Frequency (mic channels), 100Hz Low-cut Filter

Signal Processing:8 x Channel Compressors

Effects:GigFX Engine: Reverbs, Chorus, Delay, Flange, Auto-Wah

Software:Waveform OEM DAW, FX Plug-in Collection

Power Source:Standard IEC AC cable

Height:4.4″

Width:17.7″

Depth:17.1″

Weight:15.2 lbs.

Manufacturer Part Number:2051302-00
Add to cart