Amplifiers Archives - Page 2 of 3

Showing 13–24 of 33 results

Compare
Quick View
QSC RMX4050a Power Amplifier
Amplifiers
₹87,999.00
This Powerful Amplifer is a Big Performer and a Great Value!
You can count on the QSC RMX4050a when you need a reliable, tour-quality power amplifier. The sound is clear and powerful, with flexible options to help you fine-tune your sound system. The RMX4050a lets you choose between 30Hz and 50Hz low-cut filters to optimize your sound, plus a defeatable clipping limiter to protect your speakers against signal spikes. And with both XLR and 1/4″ balanced inputs, this power amp is ready to integrate into virtually any sound system. For awesome sound that you can count on for years, call us for the QSC RMX4050a power amplifier.

QSC RMX4050a Power Amplifier at a Glance:
- Compact chassis leaves more room in your rack
- Quality connections for reliable performance
- Optimize your sound with a switchable low-cut filter
Compact chassis leaves more room in your rack

Rack space counts, especially when you’re touring the country with tons of equipment. The QSC RMX4050a packs a ton of power into a chassis that’s less than 16″ deep, which gives you more room to make connections and manage your rack equipment.

Quality connections for reliable performance

The QSC RMX4050a power amplifier has both XLR and 1/4″ balanced inputs, plus vinding post and speakON outputs for maximum convenience. Whether you’re playing at the local club or managing a large-scale stage production, it’s easy to integrate the QSC RMX4050a into virtually any system that requires powerful, transparent audio performance.

Optimize your sound with a switchable low-cut filter

There’s a low-cut filter on the QSC RMX4050a, to help protect your speakers and also help you maintain more headroom. Set it at 30Hz if you’re using the RMX4050a to power a subwoofer, giving you powerful low-frequency response while filtering out sub-sonics that eat up your headroom. Set it to 50Hz if you’re powering main speakers, giving you even more headroom for clear, dynamic, full-range sound while maintaining powerful low-end presence.

QSC RMX4050a Power Amplifier Features:
- Stereo or bridged-mono power amplifier
- Compact chassis is less than 16″ deep, leaving you more space in the back of your rack
- Flexible I/O with XLR and 1/4″ balanced inputs, plus binding posts and speakON outputs
- Front-mounted gain controls give you fast, easy access to your signal levels
- Switchable 30Hz/50Hz low-cut filter lets you fine-tune your system for maximum headroom
- Signal and Clip LED indicators let you monitor performance at a glance
- Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
- Defeatable clipping limiter protects speakers against signal spikes
For Proven reliability and great sound, choose the QSC RMX4050a!
Add to cart
Compare
Quick View
QSC RMX5050a Power Amplifier
Amplifiers
₹105,999.00
This Powerful Amplifier is a Big Performer and a Great Value!
You can count on the QSC RMX5050a when you need a reliable, tour-quality power amplifier. The sound is clear and powerful with flexible options to help you fine-tune your sound system. The RMX5050a lets you choose between 30Hz and 50Hz low-cut filters to optimize your sound, plus a defeatable clipping limiter to protect your speakers against signal spikes. And with both XLR and 1/4″ balanced inputs, this power amp is ready to integrate into virtually any sound system. For awesome sound that you can count on for years, call us for the QSC RMX5050a power amplifier.
Compact chassis leaves more room in your rack

Rack space counts, especially when you’re touring the country with tons of equipment. The QSC RMX5050a packs a ton of power into a chassis that’s less than 16″ deep, which gives you more room to make connections and manage your rack equipment.

Quality connections for reliable performance

The QSC RMX5050a power amplifier has both XLR and 1/4″ balanced inputs, plus binding post and speakON outputs for maximum convenience. Whether you’re playing at the local club or managing a large-scale stage production, it’s easy to integrate the QSC RMX5050a into virtually any system that requires powerful, transparent audio performance.

Optimize your sound with a switchable low-cut filter

There’s a low-cut filter on the QSC RMX5050a, to help protect your speakers and also help you maintain more headroom. Set it at 30Hz if you’re using the RMX5050a to power a subwoofer, giving you powerful low-frequency response while filtering out sub-sonics that eat up your headroom. Set it to 50Hz if you’re powering main speakers, giving you even more headroom for clear, dynamic, full-range sound while maintaining a powerful low-end presence.

QSC RMX5050a Power Amplifier Features:

Stereo or bridged-mono power amplifier

Compact chassis is less than 16″ deep, leaving you more space in the back of your rack

Flexible I/O with XLR and 1/4″ balanced inputs, plus binding posts and speakON outputs

Front-mounted gain controls give you fast, easy access to your signal levels

Switchable 30Hz/50Hz low-cut filter lets you fine-tune your system for maximum headroom

Signal and Clip LED indicators let you monitor performance at a glance

Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers

Defeatable clipping limiter protects speakers against signal spikes

Tech Specs

Number of Channels:2

Power Class:3-tier Class H

Watts/Side @ 8 ohms:1050W

Watts/Side @ 4 ohms:1600W

Watts/Side @ 2 ohms:2000W

Watts Bridged:3200W @ 8 ohms

Inputs:2 x XLR, 2 x 1/4″ TRS, 2 x Barrier Strips

Outputs:2 x speakON, 2 x dual Binding Post

Cooling System:Variable Speed Fan, back to front air flow

Filters:30Hz, 50Hz

Overload Protection:Full short circuit, open circuit, thermal, ultrasonic, RF protection

Rack Spaces:3U

Power Source:IEC C19 to NEMA 5-20 Plug included (20A outlet required)

Height:5.25″

Depth:15.9″

Width:19″

Weight:75 lbs.

Manufacturer Part Number:RMX5050A
Add to cart
Compare
Quick View
Yamaha PX10 Power Amplifier
Amplifiers
Versatile Power Amplifier with Built-in PA Processing

Yamaha’s PX10 dual-channel Class D power amplifier gives you more than great-sounding amplification. It packs powerful built-in processing that would normally require an external PA management processing. We’re talking onboard equalization for fine-tuning outputs, crossovers for integrating subs and fills, delays for correcting phase issues in large rigs, and a speaker-saving limiter. Factor in stellar sound quality, easy control via the LCD display, and its ultra-light weight, and it’s clear the Yamaha PX10 stands out among power amps in its class.

Achieve better live sound with less gear thanks to built-in PA management
we’re pleased to see the Yamaha PX series of power amps offer a ton of powerful processing built right in. Fine-tune output channels with equalization, and add limiting to protect your speakers from dangerous signal spikes. Dial in crossovers to integrate subwoofers and fill speakers. Use the built-in delay network to ensure phase coherency across all speakers in larger rigs. And all of these advanced features are easily accessible from the LCD display.

Yamaha PX10 Dual-channel Class D Power Amplifier Features:

Dual-channel Class D power amplifier with built-in PA management processing

Connectivity includes XLR and TRS inputs, and speakON, binding post, and phono outputs

Built-in PA management tools like EQ, limiting, delays, crossovers, and filters

LCD display for easy navigation of advanced features

Drive your live sound rig with confidence, with the Yamaha PX10 dual-channel power amp.
Tech Specs

Number of Channels:2

Power Class:Class D

Watts/Side @ 8 ohms:1000W

Watts/Side @ 4 ohms:1200W

Inputs:2 x XLR, 2 x 1/4″ TRS

Outputs:2 x Neutrik speakON NL4, 2 x Binding Post, 2 x 1/4″ TS

Cooling System:2 x 16-step variable speed fan, front to rear airflow

DSP:EQ, Limiting, Delay, Crossover, Filters (saved via USB Type A port)

Filters:Yes

Rack Spaces:2U

Height:3.43″

Depth:15.25″

Width:18.87″

Weight:16.31 lbs.

Manufacturer Part Number:PX10
Read more
Compare
Quick View
Yamaha PX8 Power Amplifier
Amplifiers
Versatile Power Amplifier with Built-in PA Processing

Yamaha’s PX8 dual-channel Class D power amplifier gives you more than great-sounding amplification. It packs powerful built-in processing that would normally require an external PA management processing. We’re talking onboard equalization for fine-tuning outputs, crossovers for integrating subs and fills, delays for correcting phase issues in large rigs, and a speaker-saving limiter. Factor in stellar sound quality, easy control via the LCD display, and its ultra-light weight, and it’s clear the Yamaha PX8 stands out among power amps in its class.

Achieve better live sound with less gear thanks to built-in PA management

Live sound engineers at generally turn to dedicated speaker management processors for fine-tuning their PA systems. That’s why we’re pleased to see the Yamaha PX series of power amps offer a ton of powerful processing built right in. Fine-tune output channels with equalization, and add limiting to protect your speakers from dangerous signal spikes. Dial in crossovers to integrate subwoofers and fill speakers. Use the built-in delay network to ensure phase coherency across all speakers in larger rigs. And all of these advanced features are easily accessible from the LCD display.

Yamaha PX8 Dual-channel Class D Power Amplifier Features:

Dual-channel Class D power amplifier with built-in PA management processing

Connectivity includes XLR and TRS inputs, and speakON, binding post, and phono outputs

Built-in PA management tools like EQ, limiting, delays, crossovers, and filters

LCD display for easy navigation of advanced features

Drive your live sound rig with confidence, with the Yamaha PX8 dual-channel power amp.
Tech Specs

Number of Channels:2

Power Class:Class D

Watts/Side @ 8 ohms:800W

Watts/Side @ 4 ohms:1050W

Inputs:2 x XLR, 2 x 1/4″ TRS

Outputs:2 x Neutrik speakON NL4, 2 x Binding Post, 2 x 1/4″ TS

Cooling System:2 x 16-step variable speed fan, front to rear airflow

DSP:EQ, Limiting, Delay, Crossovers

Filters:Yes

Rack Spaces:2U

Height:3.46″

Depth:15.25″

Width:18.87″

Weight:15.8 lbs.

Manufacturer Part Number:PX8
Read more
Compare
Quick View
Yamaha PX5 Power Amplifier
Amplifiers
Versatile Power Amplifier with Built-in PA Processing

Yamaha’s PX5 dual-channel Class D power amplifier gives you more than great-sounding amplification. It packs powerful built-in processing that would normally require an external PA management processing. We’re talking onboard equalization for fine-tuning outputs, crossovers for integrating subs and fills, delays for correcting phase issues in large rigs, and a speaker-saving limiter. Factor in stellar sound quality, easy control via the LCD display, and its ultra-light weight, and it’s clear the Yamaha PX5 stands out among power amps in its class.

Achieve better live sound with less gear thanks to built-in PA management

Live sound engineers generally turn to dedicated speaker management processors for fine-tuning their PA systems. That’s why we’re pleased to see the Yamaha PX series of power amps offer a ton of powerful processing built right in. Fine-tune output channels with equalization, and add limiting to protect your speakers from dangerous signal spikes. Dial in crossovers to integrate subwoofers and fill speakers. Use the built-in delay network to ensure phase coherency across all speakers in larger rigs. And all of these advanced features are easily accessible from the LCD display.

Yamaha PX5 Dual-channel Class D Power Amplifier Features:

Dual-channel Class D power amplifier with built-in PA management processing

Connectivity includes XLR and TRS inputs, and speakON, binding post, and phono outputs

Power Boost Mode bridges the outputs to achieve double the wattage (reduces output to a single channel)

Built-in PA management tools like EQ, limiting, delays, crossovers, and filters

LCD display for easy navigation of advanced features

Drive your live sound rig with confidence, with the Yamaha PX5 dual-channel power amp.
Tech Specs
- Number of Channels:2
- Power Class:Class D
- Watts/Side @ 8 ohms:2 x 500W
- Watts/Side @ 4 ohms:2 x 800W
- Inputs:2 x XLR, 2 x 1/4″(TRS)
- Outputs:2 x Neutrik speakON NL4, 2 x Binding Post, 2 x 1/4″ (TS)
- Cooling System:16-step variable speed fan x 2, front to rear airflow
- DSP:Yes
- Filters:Yes
- Rack Spaces:2U
- Height:3.43″
- Depth:15.25″
- Width:18.87″
- Weight:16.31 lbs.
- Manufacturer Part Number:PX5
Read more
Compare
Quick View
Yamaha PX3 Power Amplifier
Amplifiers
Versatile Power Amplifier with Built-in PA Processing

Yamaha’s PX3 dual-channel Class D power amplifier gives you more than great-sounding amplification. It packs powerful built-in processing that would normally require external PA management processing. We’re talking onboard equalization for fine-tuning outputs, crossovers for integrating subs and fills, delays for correcting phase issues in large rigs, and a speaker-saving limiter. Factor in stellar sound quality, easy control via the LCD display, and its ultra-light weight, and it’s clear the Yamaha PX3 stands out among power amps in its class.

Achieve better live sound with less gear, thanks to built-in PA management
Live sound engineers at generally turn to dedicated speaker management processors for fine-tuning their PA systems. That’s why we’re pleased to see the Yamaha PX series of power amps offer a ton of powerful processing built right in. Fine-tune output channels with equalization, and add limiting to protect your speakers from dangerous signal spikes. Dial in crossovers to integrate subwoofers and fill speakers. Use the built-in delay network to ensure phase coherency across all speakers in larger rigs. And all of these advanced features are easily accessible from the LCD display.

Yamaha PX3 Dual-channel Class D Power Amplifier Features:

Dual-channel Class D power amplifier with built-in PA management processing

Connectivity includes XLR and TRS inputs and speakON, binding post, and phono outputs

Power Boost Mode bridges the outputs to achieve double the wattage (reduces output to a single channel)

Built-in PA management tools such as EQ, limiting, delays, crossovers, and filters

LCD display for easy navigation of advanced features

Drive your live sound rig with confidence, with the Yamaha PX3 dual-channel power amp.
Tech Specs
- Number of Channels:2
- Power Class:Class D
- Watts/Side @ 8 ohms:300W
- Watts/Side @ 4 ohms:500W
- Watts/Side @ 2 ohms:300W
- Watts Bridged:600W @ 8 ohms, 1000W @ 4 ohms
- Inputs:2 x XLR, 2 x 1/4″ TRS
- Outputs:2 x speakON NL4, 2 x Binding Post, 2 x 1/4″ TS
- Cooling System:2 x 16-step variable speed fan, front to rear airflow
- DSP:EQ, Limiting, Delay, Crossovers (saved via USB Type A port)
- Filters:Yes
- Rack Spaces:2U
- Height:3.46″
- Depth:15.25″
- Width:18.87″
- Weight:15.21 lbs.
- Manufacturer Part Number:PX3
Read more
Compare
Quick View
Yamaha PC412-D Power Amplifier
Amplifiers
The PC-D / DI series are so much more than just amplifiers—they are the first power amps ever to be capable of forming the core of a completely connected audio network for multi-zone installed or live sound applications. The ever-changing demands and rapid advances of amplifier technology and sound reinforcement in general require both versatility and power, and this series has plenty of both. Now you can leverage the power and flexibility of the most comprehensive matrix processing to be found on a power amplifier, all enhanced by the simplicity and ease of Dante connectivity, to create a fully integrated, effective sound solution. What’s more, full compatibility with ProVisionaire series gives you complete control over the entire network chain, from mixers through to amplifiers, processors, and speakers. In short, the PC-D / DI series gives you what every sound engineer has always dreamed of—total control.
PC412-D Power Amplifier

The PC-D / DI series are so much more than just high power amplifier. The impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard. PC-D / DI series are also compatible with ProVisionaire Touch and ProVisionaire Control, and we can provide customized remote controls if required. 1200W x 4 at 8Ω.

4 x 1200W at 8Ω

20 x 8 powerful input matrix function

Sampling frequency is up to 96k

16ch Dante input/output

Speaker processor such as 16 band PEQ, crossover, filters, delay and limiter

Yamaha speaker presets

Remote control via ProVisionaire Touch/Control
Read more
Compare
Quick View
Yamaha PC406-D Power Amplifier
Amplifiers
The PC-D / DI series are so much more than just amplifiers—they are the first power amps ever to be capable of forming the core of a completely connected audio network for multi-zone installed or live sound applications. The ever-changing demands and rapid advances of amplifier technology and sound reinforcement in general require both versatility and power, and this series has plenty of both. Now you can leverage the power and flexibility of the most comprehensive matrix processing to be found on a power amplifier, all enhanced by the simplicity and ease of Dante connectivity, to create a fully integrated, effective sound solution. What’s more, full compatibility with ProVisionaire series gives you complete control over the entire network chain, from mixers through to amplifiers, processors, and speakers. In short, the PC-D / DI series gives you what every sound engineer has always dreamed of—total control.
PC406-D Power Amplifier

The PC-D / DI series are so much more than just high power amplifier. The impressive 20 x 8 input matrix capability of PC-D / DI Series amplifiers combines with Dante I/O to provide dramatic improvements to the versatility of any system. Featuring powerful onboard speaker processors as standard. PC-D / DI series are also compatible with ProVisionaire Touch and ProVisionaire Control, and we can provide customized remote controls if required. 600W x 4 at 8Ω.

4 x 600W at 8Ω

20 x 8 powerful input matrix function

Sampling frequency is up to 96k

16ch Dante input/output

Speaker processor such as 16 band PEQ, crossover, filters, delay and limiter

Yamaha speaker presets

Remote control via ProVisionaire Touch/Control
Read more
Compare
Quick View
Crown XLi800 Power Amplifier
Amplifiers
₹29,999.00
An Everyday Power Amp You Can Count On!

Powerful, affordable, reliable – these words define Crown’s XLi 800 power amplifier as well as the rest of the XLi series amps. Whether you’re a musician, DJ, or live sound engineer, you’re sure to appreciate what this remarkably rugged amplifier can do for your PA system. With user-selectable input sensitivity (.755V or 1.4V) and a host of standard output connectors, the 800-watt XLi 800 is a perfect fit for mobile rigs, traditional venues, and houses of worship alike. And with over six decades making some of the most popular power amplifiers on Earth, you know you can trust Crown and your XLi 800 no matter what.

Crown XLi 800 Power Amplifier at a Glance:

All the versatility you can ask for in a budget-friendly amplifier

Packed with the quality I/O your venue or mobile rig demands

Smart and rugged design protects against everyday hazards

All the versatility you can ask for in a budget-friendly amplifierYou know the old adage about how if you ask two live sound engineers how to setup a system you’ll get three answers? Well, this Crown XLi 800 power amplifier can handle them all. Wether you need an amp that can do stereo, parallel, or bridged-mono mode, XLi series amps will do the trick. Even if you’re constantly reconfiguring your system, you’ll get all the versatility you need from your XLi 800.

Packed with the quality I/O your venue or mobile rig demandsNo two rigs are the same, which is why Crown outfitted their XLi amplifiers (including the XLi 800) with all of the popular connections serious live sound engineers demand. On the input side, the XLi 800 offers both balanced XLR and unbalanced RCA jacks, accommodating professional mixers and DJ systems alike. Conversely, both low-tech binding posts and modern speakON connectors let you attach any variety of passive PA speakers.

Smart and rugged design protects against everyday hazardsOne thing no engineer can afford is losing an amp right before (or in the middle of) a show. With a Crown XLi 800 in your rig, you can worry about setting a good mix, not keeping your amp from exploding. Crown built their XLi series power amplifiers with safety in mind, protecting against shorts, empty loads, on/off thumps, and more. And while they were at it, they even gave the XLi 800 a mighty effective shield against the kind of RF that can ruin any show, so you don’t have to cringe the next time the talent shows up with their special (read, outdated) wireless system.

Crown XLi 800 Power Amplifier Features:

An affordable and reliable power amplifier you can use in any PA system

600-watts in bridged-mono mode, up to 300-watts stereo/parallel operation

Includes both unbalanced RCA and balanced XLR input connectivity

Binding post and speakON output connectors let you use virtually any passive PA speakers

Selectable input voltage (.755V or 1.4V) lets you set up your rig to match your gear

LED power, fault, signal-presence, and clip indicators let you keep an eye on the safety of your amplifier

Forced-air cooling and protection against shorts, no-load, and on/off thumps ensure smooth operation and long life

Excellent shielding against radio-frequency interference keeps your sound clean, even in heavy wireless conditions

Get the power amp you need for a price you can afford with a Crown XLi 800!
Tech Specs
- Number of Channels:2
- Power Class:Class AB
- Watts/Side @ 8 ohms:200W
- Watts/Side @ 4 ohms:300W
- Watts Bridged:600W @ 8 ohms
- Inputs:2 x RCA, 2 x XLR
- Outputs:2 x speakON, 2 x Binding Post
- Cooling System:Internal heat sinks with forced air plus fan-cooled, speed-regulated, thermal protection and flow-through ventilation from front
- Rack Spaces:2U
- Height:3.5″
- Depth:12.4″
- Width:19″
- Weight:25.1 lbs.
Add to cart
Compare
Quick View
Crown XLS1002 Power Amplifier
Amplifiers
₹31,999.00
An All-purpose Amp Delivering 350 Watts

Crown Audio outdid themselves with the XLS 1002, delivering not only a high-performing power amplifier but an affordable one at that. In addition to its sleek look, this amp has a large and vivid LCD screen to monitor your parameters with ease. Loudspeaker matching, multi-filter crossover tuning, and system EQ are just some of the DSP capabilities available to maximize your audio quality.
Comprehensive controls to dial in the perfect setup

From managing input sensitivity to toggling amp modes, full customization is only a few clicks away. Included on the front panel is a user-friendly LCD screen, LED level indicators, on/off switch, and dedicated menu buttons. At a glance, the XLS 1002’s rear panel includes an array of inputs to accommodate any audio source. Add additional amps through 1/4-inch line-level outputs, Neutron Speakon outputs and binding posts — all while being protected against overload with the help of a built-in circuit breaker. With a built-in PureBand crossover system, Crown’s XLS 1002 has onboard highpass, lowpass, and band-pass filters that can be set up to 3000Hz with a 24 dB/octave slope.

A versatile two-channel amp to power any event

The Crown XLS 1002 can power 2-, 4-, or 8-ohm loads and can be bridged for 4-ohm or 8-ohm mono operation. As a Class D amplifier, you can expect optimal efficiency when driving the most demanding loudspeakers or subwoofers. And when pushing the amp to the limits, the internal heatsink and forced-air fans will automatically cool down the XLS 1002 for consistent reliability and an extended lifespan. Its lightweight design makes this power amp a clear choice for touring musicians or live production companies needing portability.

Experience Crown’s patented DriveCore technology

Here, our Sales Engineers are incredibly impressed by the amount of headroom that the Crown XLS 1002 packs under the hood. Their patented DriveCore technology provides an ultra-clean signal in even the most unpredictable live settings, so that you receive powerful, undistorted playback no matter the circumstances. Paired with transparent Peak-x Limiters, the XLS 1002 is a standout solution among Class D power amplifiers. Audiophiles and live sound engineers alike are in for a treat with any of the Crown XLS series power amplifiers.

Crown XLS 1002 Power Amplifier Features:

Class D amp with Crown’s ultra-efficient DriveCore technology

Lightweight design weighs less than 9 lbs.

Massive DSP capabilities maximize your sound

Bandpass filters for crossover tuning, loudspeaker matching, and system EQ

Large LCD display lets you keep an eye on your parameters

Selectable input sensitivity with 1.4Vrms and .775Vrms options

Sleep mode shuts the unit down after a specified time

Security setting disables menu buttons

System reset allows factory settings to be restored

Remote power trigger

Peak-x Limiters provide maximum output while protecting your speakers

XLR, 1/4″, and RCA inputs provide flexibility

Integrated PureBand Crossover System for better performance and control

Efficient forced-air fans prevent excessive thermal buildup

Tech Specs

Number of Channels:2

Power Class:Class D

Watts/Side @ 8 ohms:215W

Watts/Side @ 4 ohms:350W

Watts/Side @ 2 ohms:550W

Watts Bridged:1100W @ 4 ohms, 700W @ 8 ohms

Inputs:2 x XLR, 1 x stereo RCA, 2 x 1/4″

Outputs:2 x speakON, 2 x Binding Posts

Cooling System:Efficient Forced-air Fans

DSP:Yes

Filters:Yes

Rack Spaces:2U

Height:3.5″

Depth:7.7″

Width:19″

Weight:8.6 lbs.
Add to cart
Compare
Quick View
Crown XLS1502 Power Amplifier
Amplifiers
₹32,999.00
An All-purpose Amp Delivering 525 Watts

Crown Audio outdid themselves with the XLS 1502, delivering not only a high-performing power amplifier but an affordable one at that. In addition to its sleek look, this amp has a large, vivid LCD screen to monitor your parameters with ease. Loudspeaker matching, multi-filter crossover tuning, and system EQ are just some of the DSP capabilities available to maximize your audio quality.
A versatile 2-channel amp to power any event

The Crown XLS 1502 can power 2-, 4-, or 8-ohm loads and can be bridged for 4-ohm or 8-ohm mono operation. As a Class D amplifier, you can expect optimal efficiency when driving the most demanding loudspeakers or subwoofers. And when pushing the amp to the limits, the internal heatsink and forced-air fans will automatically cool down the XLS 1502 for consistent reliability and an extended lifespan. Its lightweight design makes this power amp a clear choice for touring musicians or live production companies needing portability.

Comprehensive controls to dial in the perfect setup

From managing input sensitivity to toggling amp modes, full customization is only a few clicks away. Included on the front panel is a user-friendly LCD screen, LED level indicators, an on/off switch, and dedicated menu buttons. At a glance, the XLS 1502’s rear panel includes an array of inputs to accommodate any audio source. Add additional amps through 1/4-inch line-level outputs, Neutron Speakon outputs, and binding posts — all while being protected against overload with the help of a built-in circuit breaker. With a built-in PureBand crossover system, Crown’s XLS 1502 has onboard a highpass filter, a lowpass filter, and a band-pass filter — all of which can be set up to 3000Hz with a 24 dB/octave slope.

Experience Crown Audio’s patented DriveCore technology

Here, our Sales Engineers are incredibly impressed by the amount of headroom that the Crown XLS 1502 packs under the hood. The company’s patented DriveCore technology provides an ultra-clean signal in even the most unpredictable live settings, so that you receive powerful, undistorted playback no matter the circumstances. Paired with transparent Peakx Limiters, the XLS 1502 is a standout solution among Class D power amplifiers. Audiophiles and live sound engineers alike are in for a treat with any of the Crown XLS series power amplifiers.
Crown XLS 1502 Power Amplifier Features:

Class D amp with Crown’s ultra-efficient DriveCore technology

Lightweight design weighs less than 9 lbs.

Massive DSP capabilities maximize your sound

Bandpass filters for crossover tuning, loudspeaker matching, and system EQ

Large LCD display lets you keep an eye on your parameters

Selectable input sensitivity with 1.4Vrms and .775Vrms options

Sleep mode shuts the unit down after a specified time

Security setting disables menu buttons

System reset allows factory settings to be restored

Remote power trigger

Peak-x Limiters provide maximum output while protecting your speakers

XLR, 1/4-inch, and RCA inputs provide flexibility

Integrated PureBand Crossover System for better performance and control

Efficient forced-air fans prevent excessive thermal buildup

A versatile 2-channel amp to power any event

The Crown XLS 1502 can power 2-, 4-, or 8-ohm loads and can be bridged for 4-ohm or 8-ohm mono operation. As a Class D amplifier, you can expect optimal efficiency when driving the most demanding loudspeakers or subwoofers. And when pushing the amp to the limits, the internal heatsink and forced-air fans will automatically cool down the XLS 1502 for consistent reliability and an extended lifespan. Its lightweight design makes this power amp a clear choice for touring musicians or live production companies needing portability.

Comprehensive controls to dial in the perfect setup

From managing input sensitivity to toggling amp modes, full customization is only a few clicks away. Included on the front panel is a user-friendly LCD screen, LED level indicators, an on/off switch, and dedicated menu buttons. At a glance, the XLS 1502’s rear panel includes an array of inputs to accommodate any audio source. Add additional amps through 1/4-inch line-level outputs, Neutron Speakon outputs, and binding posts — all while being protected against overload with the help of a built-in circuit breaker. With a built-in PureBand crossover system, Crown’s XLS 1502 has onboard a highpass filter, a lowpass filter, and a band-pass filter — all of which can be set up to 3000Hz with a 24 dB/octave slope.

Experience Crown Audio’s patented DriveCore technology

At Sweetwater, our Sales Engineers are incredibly impressed by the amount of headroom that the Crown XLS 1502 packs under the hood. The company’s patented DriveCore technology provides an ultra-clean signal in even the most unpredictable live settings, so that you receive powerful, undistorted playback no matter the circumstances. Paired with transparent Peakx Limiters, the XLS 1502 is a standout solution among Class D power amplifiers. Audiophiles and live sound engineers alike are in for a treat with any of the Crown XLS series power amplifiers.

Crown XLS 1502 Power Amplifier Features:

Class D amp with Crown’s ultra-efficient DriveCore technology

Lightweight design weighs less than 9 lbs.

Massive DSP capabilities maximize your sound

Bandpass filters for crossover tuning, loudspeaker matching, and system EQ

Large LCD display lets you keep an eye on your parameters

Selectable input sensitivity with 1.4Vrms and .775Vrms options

Sleep mode shuts the unit down after a specified time

Security setting disables menu buttons

System reset allows factory settings to be restored

Remote power trigger

Peak-x Limiters provide maximum output while protecting your speakers

XLR, 1/4-inch, and RCA inputs provide flexibility

Integrated PureBand Crossover System for better performance and control

Efficient forced-air fans prevent excessive thermal buildup
Add to cart
Compare
Quick View
Crown XLS2002 Power Amplifier
Amplifiers
₹38,999.00
A Clean 650-watt Sound Experience

Crown gave their DriveCore series a mighty makeover with the XLS 2002 power amplifier. In addition to its sleek look, the XLS 2002 provides you with a large LCD display so you can keep an eye on your parameters, and massive DSP capabilities to maximize the quality of your sound. In addition to highpass and lowpass filters, the XLS 2002 provides you with a bandpass filter on each channel for precise DSP crossover tuning, loudspeaker matching, and system EQ capabilities. Incredibly versatile, the XLS 2002 can power 2-, 4-, or 8-ohm loads and can be bridged for 4-ohm or 8-ohm mono operation. Here, we’re impressed by the amount of headroom that the Crown XLS 2002 power amplifier provides. Expect a powerful, clean, undistorted sound experience!

Crown XLS 2002 Power Amplifier Features at a Glance:
- Class D amp with Crown’s ultra-efficient DriveCore technology
- Lightweight design weighs less than 11 lbs.
- Massive DSP capabilities maximize your sound
- Bandpass filters for crossover tuning, loudspeaker matching, and system EQ
- Large LCD display lets you keep an eye on your parameters
- Selectable input sensitivity with 1.4Vrms and .775Vrms options
- Sleep mode shuts the unit down after a specified time
- Security setting disables menu buttons
- System reset allows factory settings to be restored
- Remote power trigger
- Peak-x Limiters provide maximum output while protecting your speakers
- XLR, 1/4″, and RCA inputs provide flexibility
- Integrated PureBand Crossover System for better performance and control
- Efficient forced-air fans prevent excessive thermal buildup
Give your gear the power it needs with the trustworthy, rock-solid Crown XLS 2002!

Tech Specs
- Number of Channels:2
- Power Class:Class D
- Watts/Side @ 8 ohms:375W
- Watts/Side @ 4 ohms:650W
- Watts/Side @ 2 ohms:1050W
- Watts Bridged:2100W @ 4 ohms, 1300W @ 8 ohms
- Inputs:2 x XLR, 1 x stereo RCA, 2 x 1/4″
- Outputs:2 x speakON, 2 x Binding Posts
- Cooling System:Efficient Forced-air Fans
- DSP:Yes
- Filters:Yes
- Rack Spaces:2U
- Height:3.5″
- Depth:10.7″
- Width:19″
- Weight:10.8 lbs.
Add to cart