Installed Sound & Others

Showing 33–48 of 58 results

  • 0 out of 5

    Behringer Ultragraph Pro FBQ3102HD Graphic Equaliser

    24,590.00

    31-band Graphic EQ with Feedback Detection

    The Behringer Ultragraph Pro FBQ3102HD 31-band graphic equalizer is packed with the professional features you need. An FBQ Feedback Detection system quickly locates problem frequencies. A Planet Earth switching power supply yields noise-free audio, superior transient response, and efficient power consumption. Its 4580 dual op-amps exhibit low noise and excellent sound quality. Remove floor rumble, hiss, and other unwanted frequencies with sweepable highpass (low-cut) and lowpass (high-cut) filters on each channel. The Ultragraph Pro’s 12-segment LED meter is extremely precise, and its input gain controls make setting levels a piece of cake. The Behringer Ultragraph Pro FBQ3102HD 31-band graphic equalizer is a great value for your studio or live sound rig.

    Behringer FBQ3102HD 31-band Stereo Equalizer at a Glance:

    • FBQ provides you with a feedback-free system
    • Top-quality components deliver excellent sound quality
    • High and lowpass filters ensure clean sound

    FBQ provides you with a feedback-free systemThe Behringer Ultragraph Pro’s FBQ Feedback Detection System delivers ultra-fast detection of problem frequencies, so you can stop feedback dead in its tracks. The system is child’s play to use. Whenever feedback is detected in a specific frequency range, an LED lights up on the associated EQ fader. You then lower the fader to zap the feedback. Here, we like that we can locate out-of-control frequencies at a glance, allowing us to quickly turn our focus back on the performance.

    Top-quality components deliver excellent sound qualityThanks to excellent engineering, the Behringer Ultragraph Pro is a real performer. The 4580 dual op-amps employed throughout supply great signal integrity, while a Planet Earth switching power supply ensures low noise and superior transient response. The Ultragraph Pro is ideal for adding the finishing touch to your live show or recording, with 31 bands of smooth, precise equalization per channel.

    High and lowpass filters ensure clean soundThe sweepable highpass (low-cut) and lowpass (high-cut) filters on each of the Behringer Ultragraph Pro’s channels attenuate unwanted sounds such as hiss, wind noise, floor rumble, electrical hum, and more. Ask any of the live sound techs, and they’ll tell you that unnecessary low-frequency content really eats up your power amp’s headroom. And having the ability to fine-tune your overall sound results in crystal-clear, dynamic output with the perfect level of low-end punch.

    Behringer FBQ3102HD 31-band Stereo Equalizer Features:

    • 31-band stereo graphic equalizer for live and studio applications
    • FBQ Feedback Detection system quickly locates problem frequencies
    • 4580 dual op-amps exhibit low noise and excellent sound quality
    • Planet Earth switching power supply yields noise-free audio, superior transient response, and efficient power consumption
    • Dedicated mono subwoofer output with adjustable crossover frequency
    • Sweepable highpass (low-cut) and lowpass (high-cut) filters on each channel tame unwanted frequencies
    • 12-segment LED meter and input gain controls make setting levels easy
    • Relay-controlled hard-bypass with auto-bypass function during power failure
    • Servo-balanced inputs and outputs with 1/4″ TRS and gold-plated XLR connectors

    The Behringer Ultragraph Pro 31-band graphic equalizer has the professional features you need!

    Quick View
  • 0 out of 5

    Behringer Ultralink MS8000 Microphone Splitter

    12,999.00

    8 Flexible Channels of Connectivity

    The Behringer Ultralink MS8000 8-channel microphone splitter sends your mic signal to multiple locations, such as mixing consoles, stage monitors, and broadcast trucks. This, for example, would allow you to connect to front of house and your in-ear monitors simultaneously. Eight inputs and 16 outputs provide you with plenty of flexibility, while a Lift/Ground switch and linkable channels make the Ultralink MS8000 an indispensable tool for stage and studio. How many uses could you come up with for the Behringer Ultralink MS8000 8-channel microphone splitter?

     

    Behringer Ultralink MS8000 at a Glance:

    • Direct and Link outputs offer amazing flexibility
    • Input Link function doubles your outputs

    Direct and Link outputs offer amazing flexibilityThe Behringer Ultralink MS8000’s eight front-panel XLR inputs make it easy to connect your microphones and DI boxes, even in a crowded rack. A Lift/Ground switch improves your sound by eliminating hum and other ground loop noises. An XLR Direct Out sends your signal post-transformer, while an XLR Link Out sends it pre-transformer. This allows you to send the Direct Out signal to front of house or a mixing console, while simultaneously sending the Link Out signal to your monitor board or headphone mixer.

    Input Link function doubles your outputsBy employing the Behringer Ultralink MS8000’s Input Link function, you can link two adjacent channels. This allows you to connect a source to one channel and send it from the outputs of two channels. Imagine plugging your mic into Channel 1. You could then send your signal to front of house and a monitor mixer from Channel 1’s outputs, while sending it to a recording interface and broadcast mixer from Channel 2’s outputs. The Ultralink MS8000 also allows you to link two adjacent channels and merge their source into a single output, which is great for managing multiple playback devices or converting stereo signals to mono.

    Behringer Ultralink MS8000 Features:

    • 8-in/16-out microphone splitter
    • Direct and Link outputs let you send pre- and post-transformer signals
    • Lift/Ground switch eliminates hum and other ground loop noises
    • Input Link function doubles your outputs
    • Passes phantom power from your console or mic pre to Direct Outputs

    The Behringer Ultralink MS8000 8-channel mic splitter is a useful tool for stage and studio!

    Tech Specs

    • Inputs:8 x XLR
    • Outputs:8 x XLR (direct out), 8 x XLR (link out)
    • Phantom Power:Passed through direct outs
    • Power Source:Passive
    • Height:1.75″
    • Width:19″
    Quick View
  • 0 out of 5

    DBX 231S Graphic Equaliser

    17,499.00

    The Benchmark of Live EQs

    There’s a reason many of today’s top live sound professionals turn to dbx for live sound EQs. With dbx’s impeccable history of making robust and reliable graphic EQs, they’ve become a standard in touring rigs and installed PA systems everywhere. The dbx 231s dual-channel 31-band graphic equalizer lives up to the legacy – providing 1/3-octave Constant Q control beyond the audible frequency spectrum. Equipped with a switchable +/-6dB or +/-12dB, the 231s gives you fine control and superb sound quality. And with over 108dB of dynamic range, you know your sound is in good hands when you trust it to the dbx 231s graphic EQ.

     

     

    dbx 231s Dual-channel 31-band Equalizer Features at a Glance:

    • 1/3-octave Constant Q frequency bands
    • Switchable boost/cut ranges of +/-6 or +/-12dB
    • 12dB/octave 50Hz low-cut filter
    • Front panel bypass switch
    • +/-12dB input gain range
    • 4-segment LED ladders for monitoring output level
    • XLR and TRS inputs and outputs
    • Frequency response of <10Hz to >50kHz
    • Dynamic range of greater than 108dB
    • Weight: 6.2 lbs.
    • Dimensions: 3.5″ x 6″ x 19″

    For precision control and quality sound, count on the dbx 231s 31-band graphic equalizer!

    Tech Specs

    • Number of Bands:2 x 31-band
    • Q Type:Fixed
    • Boost/Cut Range:±6 dB, ±12 dB (Switchable)
    • Low Cut Filter:50Hz, 12 dB/octave
    • Faders Throw:Short-throw
    • Rack Spaces:2U
    • Height:3.5″
    • Depth:6″
    • Width:19″
    • Weight:6.2 lbs.
    • Manufacturer Part Number:DBX231SV
    Quick View
  • 0 out of 5

    DBX 234XS Analog Crossover

    17,999.00

    This Crossover Is Ready for Any Rig

    The dbx 234xs is a fully versatile crossover that’s perfect for any professional live sound rig. The 234xs is capable of either 2-way or 3-way stereo or 4-way mono operation. Equipped with 24dB/octave Linkwitz-Riley filters, the 234xs gives you the steep crossover bands you demand. Each output features an independent level control and phase inversion switch, as well as a 40Hz low cut filter. For use with a subwoofer, the 234xs also includes a low-frequency output summing option.

     

     

    dbx 234xs crossover Features at a Glance:

    • 2-/3-way stereo, 4-way mono operation
    • 24dB/octave Linkwitz-Riley filters
    • XLR inputs and outputs
    • Low-frequency summing for subwoofer output
    • x10 range switch on both channels
    • 40Hz highpass (low cut) filter both channels
    • Phase reverse switch on all outputs
    • Individual level controls on all outputs
    • Stereo/Mono status LEDs indicate the selected mode
    • dbx 2-year parts and labor coverage

    Get the dbx 234xs crossover, and prepare your live rig for any configuration!

    Tech Specs

    • Number of Channels:2
    • Modes:2-way (Stereo), 3-way (Stereo), 4-way (Mono)
    • Filter Types:Linkwitz-Riley
    • Filters:24dB/octave
    • Crossover Frequencies – Stereo:45Hz-960Hz/450Hz-9.6 kHz
    • Crossover Frequencies – Mono:45Hz-960Hz/450Hz-9.6 kHz
    • Inputs:2 x XLR
    • Outputs:6 x XLR
    • Rack Spaces:1U
    • Height:1.75″
    • Depth:6.9″
    • Width:19″
    • Weight:4 lbs.
    • Manufacturer Part Number:DBX234XSV
    Quick View
  • 0 out of 5

    DBX Driverack 260 Loudspeaker Management System

    46,999.00

    Everything You Need for Complete Control of Your PA System

    The 260 capitalizes on the road tested and contractor approved DriveRack, providing state-of-the-art signal processing while utilizing a simple and intuitive user interface. It offers two independent channels of processing power with a linkable 28-band Graphic Equalizer, industry-standard dbx stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input, with a six channel output system that includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts) and alignment delay.

    These features combined with the Wizard setup system and complete DriveWare GUI control represent a methodical design that is guaranteed to deliver optimal, all-inclusive processing in a completely scalable system. The 260 provides full bandpass and crossover configurations as well as independent output processing and a full time RTA for live sound applications. Contractors will appreciate its control inputs for wall-panel logic control and the patent-pending Advanced Feedback Suppression.

    dbx DriveRack 260 Features:

    • Feedback elimination
    • 2.7 seconds of Alignment and Zone Delay
    • RS-232 PC GUI control
    • Classic dbx Compression and Limiting
    • Graphic and Parametric EQ
    • Auto-EQ function
    • Full Bandpass, Crossover, and Routing configurations
    • Auto Gain control
    • Pink Noise Generator and fulltime RTA
    • Set-up Wizard with JBL speaker and Crown Power Amp tunings
    • Security lockout
    • Wall Panel Control inputs

    Tech Specs

    • Number of Channels:2
    • Presets – Factory:25
    • EQ:Graphic, Parametric
    • Compressor:Compression, Limiting
    • Feedback Eliminator:Yes
    • Noise Generator:Pink (Full-time RTA)
    • Analog Inputs:2 x XLR, 1 x XLR (RTA Mic)
    • Analog Outputs:6 x XLR
    • Computer Connectivity:DB-9
    • Rack Spaces:1U
    • Height:1.75″
    • Depth:5.75″
    • Width:19″
    • Weight:5.5 lbs
    • Manufacturer Part Number:DBX260V
    Quick View
  • 0 out of 5

    DBX Driverack PA2 Loudspeaker Management System

    28,299.00

    Get the Most From Your PA with DriveRack!

    Quickly and easily setup your PA system for optimized sound with the dbx DriveRack PA2 Loudspeaker Management System. Ideal for touring bands and artists who carry their own PA system, the DriveRack PA2 gives you the best sound possible at each and every gig. A new setup wizard gets you up and playing faster and easier than ever. Updated AutoEQ and Advanced Feedback Suppression take the guesswork out of finding the perfect sound for each venue. And now all the DriveRack PA2 functions can be accessed and controlled via your preferred mobile device or laptop. Get the most out of your PA system with the dbx DriveRack PA2 Loudspeaker Management System!

    dbx DriveRack PA2 Loudspeaker Management System Features:

    • Extremely smart loudspeaker management
    • Take complete control of your system from your mobile device
    • Setup is easier than ever

    Extremely smart loudspeaker management

    Setting up your PA is a strenuous task, but optimizing the system for each room can be an even more challenging. dbx designed the DriveRack PA2 to be a complete, easy-to-use loudspeaker management system for all types of musicians. The updated AutoEQ algorithm automatically dials in the ideal EQ for each room. It “listens” to your room via RTA mic (not included), analyzes it, and sets the appropriate speaker levels and room EQ. Setting up has never been this easy. And DriveRack PA2 anticipates potential feedback and adjusts the system before it has a chance to deafen the audience. Finally, to make this experience even more friendly, dbx lets you do all of this from the front panel of the DriveRack PA2 or from your mobile device of choice.

    Take complete control of your system from your mobile device

    The live audio experts  know that running around the venue and back to the board can be a pain, and the dbx DriveRack PA2 has eliminated that issue. You can now take complete control of the DriveRack PA2 with your mobile device or laptop using Ethernet control via an Android, iOS, Mac, or Windows device. You can roam around the venue accurately tweaking EQs, volumes, and more. Whether you’re at the soundboard, behind stage, or in the balcony, you can control the dbx DriveRack PA2 to dial in the perfect sound.

    Setup is easier than ever

    Having the dbx DriveRack PA2 in your rig is like permanently hiring an experienced Live Sound Engineer! This Loudspeaker Management System can intelligently set itself up to get the best sound possible from your PA. Just bring a measurement microphone to your next gig, run the “Wizard” setup, and let the DriveRack PA2 take it from there! It can instantly configure itself to get optimized EQ settings for any room.

    dbx DriveRack PA2 Loudspeaker Management System at a Glance:

    • Take control of your PA system with this state-of-the-art loudspeaker management system
    • Automatically set up your PA with updated Wizard functions
    • Take control of the DriveRack PA2 with your favorite mobile device or laptop
    • Enhanced Advanced Feedback Suppression and AutoEQ functions
    • Includes dbx’s legendary compression
    • Works with Android, iOS, Mac, and Windows devices
    • Built-in crossover, limiting, and driver alignment delays
    • Note: RTA microphone is NOT included

    Set up and optimize your PA system in no time with the dbx DriveRack PA2 Loudspeaker Management System!

    Tech Specs

    • Rack Spaces:1U
    • Analog Outputs:6 x XLR (stereo low, mid, high)
    • Feedback Eliminator:Advanced Feedback Suppression
    • EQ:8-band (Parametric)
    • Number of Channels:2
    • Computer Connectivity:USB Type B
    • Analog Inputs:2 x XLR
    • Compressor:Yes
    • Presets – User:75 user presets
    • Manufacturer Part Number:DBXPA2-V-TW
    Quick View
  • 0 out of 5

    DBX Driverack Venu360 Loudspeaker Management System

    59,999.00

    Smart and Powerful Loudspeaker Management

    The DriveRack VENU360 brings together everything you love about dbx processors and puts it into one powerful loudspeaker management tool. With the latest advances in AFS and AutoEQ, the VENU360 joins the DriveRack line with powerful DSP that makes your setup life easier and your sound even sweeter. dbx is famous for giving engineers all of the system processing power they need from convenient crossover configurations to system EQ to presets for specific speaker cabinets that automatically set you up for sound success, and all in one piece of roadworthy gear. Tuning your PA, no matter what size, is an important step towards getting great sound in any room, use dbx’s DriveRack VENU360 and get it done right.

    System configuration virtually any way you like it

    The VENU360 gives you three analog inputs, AES digital inputs, and six balanced, analog outputs that are designed to take signal directly from your mixer to fully support mono, stereo, LCR, and aux-fed sub systems. The balanced XLR outputs with full EQ and dynamics processing give you expanded system configuration options that include separate processing for monitor systems and making up to 6-way system operations possible. The VENU360 works great for installed systems and is compatible with Ethernet wall controllers. For portable systems – whether you’re flying a line array in an arena or setting up your band at the local pub – the VENU360 makes light work of getting the show ready for downbeat. And since dbx is continually working on making their processing cleaner and better, they included a USB port for easy firmware updates.

    Get the latest in dbx processing technologies

    The VENU360 gives you professional-level processing power by providing essential loudspeaker tuning tools. With the latest in dbx processing including their most accurate AFS (Automatic Feedback Suppression) ever, AutoEQ and Level Assist functions with front panel RTA mic input, graphic and parametric EQs on both the inputs and outputs, compression and other dynamics processing, time delay functions, and bass-bumping subharmonic synthesis, you get all the power you’d usually find in two racks full of gear in one VENU360!

    The power you need but easier than ever to use

    Just because it’s powerful doesn’t mean the VENU360 is complicated. In fact, with its automated wizard setup utilities, getting great sound is easy whether there’s a pro at the desk or a Sunday services volunteer. A large, super-bright LCD screen gives you access to a setup wizard that supports full system configuration and tuning including monitoring systems, access to loudspeaker presets, and hundreds of other audio paramaters. Like what you hear? Then save it! You’ll have up to 75 user-definable presets to make switching from the Saturday night service praise and worship band to the Sunday morning choir configuration a snap. These presets are especially helpful if you rely on volunteers, because even if you run full range and mono, the VENU360 works to protect your system components while optimizing your sound. And if you’re a member of a touring band, nothing makes an impression on a venue manager like a quick setup and great sound, and nothing makes it easier for you to do than the VENU360.

    The convenience of wireless control

    Setting up a PA is hard work. You spend the day unloading gear, getting it into position, cabling it up, getting signal through it, and now, it’s time to tune – here’s where the VENU360 can be your hero. Simply plug a router into the VENU360 and you’ll be able to set up and operate it using dbx’s app on your Mac or PC or iOS or Android device – the VENU360 gives you the flexibility to configure your PA offline and get it all done before you even step foot in the venue. When you’re ready to fine tune your pre-configurations, fire up your tablet or iPad and tune while you walk the room, the VENU360 gives you a chance to tune your PA from the audience perspective and not just from the front of house position.

    dbx DriveRack VENU360 Loudspeaker Management Processor Features:

    • AFS automatically identifies feedback frequencies and eliminates the problem
    • Driver alignment and zone delay functions
    • Wireless control from your Mac, PC, iOS, or Android devices
    • Classic transparent dbx compression and limiting
    • Graphic and parametric EQs for fine-tuning control
    • Auto-EQ function takes the guesswork out of tuning your PA to troublesome rooms
    • Full bandpass, crossover, and routing configurations up to 6-way operation
    • Auto gain control for easy setup
    • Subharmonic synthesis gives your bass a boost
    • Set-up wizard with speaker and amp tunings makes light work of system tuning
    • Security lockout keeps curious fingers from ruining your setup
    • Compatible with Ethernet audio wall controllers for installed sound

    Tech Specs

    • EQ:31-band (Graphic), 12-band (Parametric)
    • Compressor:Yes
    • Feedback Eliminator:Yes
    • Rack Spaces:1U
    • Height:1.75″
    • Width:19″
    • Manufacturer Part Number:DBXVENU360-V-TW
    Quick View
  • 0 out of 5

    JBL Control 1 Pro Surface Mount Speakers

    12,599.00

    The JBL Control 1 Pro is a compact professional studio monitor speaker that is widely used in recording studios, broadcast studios, and other professional audio environments. It is a popular choice for near-field monitoring, meaning it is designed to deliver accurate sound reproduction at close listening distances.

    Here are some key features of the JBL Control 1 Pro:

    1. Design: The Control 1 Pro features a compact and rugged design, making it suitable for desktop or wall-mounting installations. It has a black enclosure with a metal grille to protect the speaker.
    2. Drivers: It has a 5.25-inch low-frequency driver (woofer) and a 0.75-inch high-frequency driver (tweeter). These drivers are designed to provide a balanced and detailed sound reproduction.
    3. Frequency Response: The Control 1 Pro has a frequency response range of 80Hz to 20kHz. This range covers most of the audible spectrum and allows for accurate monitoring of audio content.
    4. Power Handling: It has a power handling capacity of 150 watts peak and 75 watts continuous. This allows for sufficient volume levels and dynamic range in professional audio applications.
    5. Connectivity: The speaker has a standard 5-way binding post input terminal that accepts speaker wire connections. It can be easily connected to audio interfaces, mixers, or amplifiers.
    6. Applications: The Control 1 Pro is suitable for a variety of audio applications, including recording and mixing in small studios, multimedia presentations, broadcast monitoring, and home theater setups.
    7. Accessories: JBL offers optional accessories for the Control 1 Pro, such as wall-mount brackets and adjustable mounting brackets, which enhance flexibility for installation in different environments.

    Overall, the JBL Control 1 Pro is known for its accurate sound reproduction, durability, and versatility, making it a reliable choice for professionals and enthusiasts in the audio industry.

    Quick View
  • 0 out of 5

    JBL Control 23-1 Surface Mount Speakers

    24,000.00

    Great Sound, Indoors or Out

    Experience rich sonic character, wide coverage, and broad frequency response with the JBL Control 23-1 compact speaker. Ideal for retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and more, the Control 23-1 is a piece of cake to mount, and its contemporary design looks great anywhere. Here, we appreciate the versatility of the Control 23-1’s built-in InvisiBall mounting hardware. Indoors or out, the weather-resistant JBL Control 23-1 compact speaker achieves excellent sound quality wherever foreground/background music and/or paging is required.

    JBL Control 23-1 Compact Speaker Features at a Glance:

    • 3″ woven fiberglass cone woofer yields excellent low-end response
    • 0.5″ PEI-diaphragm tweeter with fluid cooling delivers great-sounding high frequencies
    • 70Hz-20kHz frequency response for rich, high-fidelity sound
    • Wide 100-degree x 100-degree coverage fills the entire area with sound
    • Built-in InvisiBall hardware mounts almost anywhere
    • Weather-resistant enclosure and transducers
    • Contemporary design looks great anywhere
    • Transformer Taps: 70V: 15W, 7.5W, 3.7W, 1.8W; 100V: 15W, 7.5W, 3.7W

    Indoors or out, the JBL Control 23-1 compact speaker delivers excellent sound!

    Tech Specs

    • Powered:No
    • LF Driver Size:3″
    • HF Driver Size:.5″
    • Power Rating:100W
    • Impedance:8 ohms
    • Inputs:Screw terminal (#6/#8/#10 spade lug or bare wire)
    • Frequency Range:70Hz – 20kHz
    • Maximum Peak SPL:103dB
    • Horizontal Coverage Angle:100 Degrees
    • Vertical Coverage Angle:100 Degrees
    • Enclosure Material:High Impact Polystyrene
    • Mounting Options:Wall Mount (hardware included), Suspended (optional U-bracket)
    • Height:7.9″
    • Width:5.6″
    • Depth:4.4″
    • Weight:4 lbs.
    • Manufacturer Part Number:CONTROL 23-1

     

    Quick View
  • 0 out of 5

    JBL Control 88M Garden Speakers

    Designed for outdoor applications, the highly weather resistant Control 80 Series Landscape speakers provide excellent full-range sound quality and 360 degree coverage. Designed to be mounted on or in the ground, Control 80 Series Landscape speakers can be used in a wide variety of applications including shopping malls, theme parks, sports venues, hotels, casinos, resorts, restaurants, hospitality and leisure venues, entrance ways, and anywhere a high quality music and/or paging speaker landscape speaker is required. Compact in design, the speaker is unobtrusive and easily blends in with its surroundings. A tough polyethylene enclosure resists abuse from lawn care equipment and the elements, and the enclosure color extends throughout the material so the speaker will maintain color even when scraped or scratched.

    Features

    • Components:
      • 8” highly weather-resistant driver
      • 1” soft-dome highly weather-resistant tweeter
    • 120W Pink Noise Power Handling (240W program) in direct 8Ώ setting, plus built-in 60W 70V/100V multi-tap transformer
    • Tough polyethylene highly weather resistant enclosure
    • Fully isolated center chamber for wiring protection
    • High fidelity sound character with broad frequency range of 47Hz – 16kHz
    Quick View
  • 0 out of 5

    JBL CSMA1120 Mixer Amplifier

    The JBL® CSMA series of Mixer-Amplifiers are a professional tool with a sleek industrial look that is designed and built for commercial sound applications. Utilizing Crown’s DriveCore technology enables significantly reduced size and weight – all mixer/amps are highly efficient, fanless and just 1U rack space high. There are both single channel and two channel models with four or eight mixer channels, respectively.

    The CSMA mixer/amps offer unmatched ease of use, with a clean, front panel featuring only volume controls for each channel, master volume adjustment, adjustable bass and treble controls and a power switch. All the volume controls are surrounded by an illuminated ring, making them easy to see and operate in darkened environments. The amplifier can drive 8 ohm and 4 ohm loads and can be used with 70V and 100V distributed audio systems without the need for a separate transformer. In addition to balanced mic/line inputs, unbalanced RCA inputs and speaker connections, all units include RJ45 connectors for use with JBL CSR-V in-wall volume controls. All models feature a universal power supply which enables the ability to accept AC voltages from 100 to 240 VAC, 50/60Hz.

    JBL Commercial mixer/amps are manufactured under HARMAN’s GreenEdge™ environmental initiative, conforming to lead-free RoHS standards and utilizing recycled copper, aluminum and steel, an energy-saving powder coat finishing process and other environmentally-conscious manufacturing processes. Their highly efficient DriveCore design reduces power consumption and yields much more efficient operation – up to 80 percent more efficient than previous designs. All models carry a 3-year no-fault transferable warranty.

    • Ideal for commercial and industrial use
    • Sleek industrial look with illuminated rings, making them easy to see and operate
    • 4 inputs with 1 output of 120-watts of power
    • Euro-block type mic/line input and output connectors, and unbalanced RCA inputs for consumer connection
    • Supports 70V and 100V distributed audio systems without needing a separate transformer
    • Includes rack mounting kit
    • Fanless, space-saving 1U design
    Quick View
  • 0 out of 5

    JBL CSMA2120 Mixer Amplifier

    The JBL® CSMA series of Mixer-Amplifiers are a professional tool with a sleek industrial look that is designed and built for commercial sound applications. Utilizing Crown’s DriveCore technology enables significantly reduced size and weight – all mixer/amps are highly efficient, fanless and just 1U rack space high. There are both single channel and two channel models with four or eight mixer channels, respectively.

    The CSMA mixer/amps offer unmatched ease of use, with a clean, front panel featuring only volume controls for each channel, master volume adjustment, adjustable bass and treble controls and a power switch. All the volume controls are surrounded by an illuminated ring, making them easy to see and operate in darkened environments. The amplifier can drive 8 ohm and 4 ohm loads and can be used with 70V and 100V distributed audio systems without the need for a separate transformer. In addition to balanced mic/line inputs, unbalanced RCA inputs and speaker connections, all units include RJ45 connectors for use with JBL CSR-V in-wall volume controls. All models feature a universal power supply which enables the ability to accept AC voltages from 100 to 240 VAC, 50/60Hz.

    JBL Commercial mixer/amps are manufactured under HARMAN’s GreenEdge™ environmental initiative, conforming to lead-free RoHS standards and utilizing recycled copper, aluminum and steel, an energy-saving powder coat finishing process and other environmentally-conscious manufacturing processes. Their highly efficient DriveCore design reduces power consumption and yields much more efficient operation – up to 80 percent more efficient than previous designs. All models carry a 3-year no-fault transferable warranty.

    • Ideal for commercial and industrial use
    • Sleek industrial look with illuminated rings, making them easy to see and operate
    • 8 inputs with 2 outputs of 120-watts of power
    • Euro-block type mic/line input and output connectors, and unbalanced RCA inputs for consumer connection
    • Supports 70V and 100V distributed audio systems without needing a separate transformer
    • Includes rack mounting kit
    • Fanless, space-saving 1U design

     

    Quick View
  • 0 out of 5

    Sennheiser MEG14-40-LB Goosneck Microphone

    21,499.00

    The MEG 14-40-LB features a made in Germany quality gooseneck microphone on an attractive price. It features a Sennheiser KE 10 microphone capsule with cardioid directivity for universal miking. The flexible element of the streamlined 40 cm gooseneck ensures precise alignment of the microphone. Additionally the MEG 14-40-L (L: red)) which indicates the spokesperson that is allowed to take the floor.

    • Gooseneck with integrated Sennheiser KE10 microphone capsule
    • RF shielding against intermodulation from wireless devices
    • Streamlined design for seamless integration
    • Integrated light ring MEG 14-40-L (red)
    • Premium quality made in Germany
    Quick View
  • 0 out of 5

    Sennheiser MEG14-40B Gooseneck Microphone

    17,999.00

    A Great Podium Mic!

    The Sennheiser MEG 14-40 gooseneck microphone gives you the unobtrusive flexibility you need for lectures and seminars. A streamlined 15.75″ gooseneck brings the MEG 14-40’s condenser element close to your face, allowing you to maintain an upright posture while speaking directly into the microphone. The MEG 14-40 also features Sennheiser’s high-performance KE10 microphone capsule. This capsule’s cardioid pickup pattern provide excellent unidirectional reception while preventing off-axis noise from interfering with your presentations and keeping feedback at bay.

     

     

    Sennheiser MEG 14-40 Gooseneck Condenser Microphone Features at a Glance:

    • Vocal-optimized condenser element
    • Streamlined 15.75″ gooseneck is unobtrusive and easy to position
    • Integrated KE10 microphone capsule with a focused cardioid polar pattern
    • RF shielding protects against intermodulation from wireless devices
    • Terminated with a standard XLR connector

    Get the focused sound and clarity your presentations demand, from the Sennheiser MEG 14-40 gooseneck condenser microphone!

    Tech Specs

    • Microphone Type:Condenser
    • Polar Pattern:Cardioid
    • Frequency Response:50Hz-20kHz
    • Max SPL:130dB
    • Output Impedance:100 ohms
    • Self Noise:26dB (A weighted)
    • Connector:XLR
    • Gooseneck Length:15.7″
    • Weight:0.295 lbs.
    • Manufacturer Part Number:504791
    Quick View
  • 0 out of 5

    Yamaha VXC3FW Ceiling Speakers

    • 3.5” full-range speaker unit
    • Engineered for optimum BGM reproduction
    • Low-profile design facilitates installation in limited ceiling spaces
    • Direct support for low-impedance or high-impedance connections
    • Built-in carrying band increases safety during installation
    • Anti-drop tab mechanism provide secure temporary positioning during installation
    • Double-threaded speaker clamp screws for speedy tightening
    • Paintable grilles with magnetic catches
    • Black and white versions available
    • 2.5kg (5.5lbs), Ø285 x D112 mm (Ø11-1/4″ x D4-7/16″)
    Quick View
  • 0 out of 5

    JBL CBT100LA-1 Line Array Column Speakers

    56,999.00

    Amazingly Balanced Sound for Any Room or Theater

    The JBL CBT 100LA-1 passive speaker uses JBL’s breakthrough Constant Beamwidth Technology to produce a column speaker with incredibly balanced projection across a large area. Passive column speakers normally create inconsistencies in sound when you move about the room, but not the CBT 100LA-1! JBL’s patent-pending design uses an array of 16 full-range 2″ drivers with 325 watts of power capacity, and the result is consistent, natural sound coverage – both horizontally and vertically. You can even tailor the vertical dispersion to optimize the sound to any room! Perfect for large rooms like churches, school auditoriums, and theaters, the CBT 100LA-1 is easy to install as well as easy to optimize for your room. Call us today to find out how you can integrate the JBL CBT 100LA-1 passive speakers into your live sound system!

    JBL CBT 100LA-1Passive Speaker at a Glance:

    • Innovative design for superior sound coverage
    • Perfect for performance and speech
    • Easy to install
    Innovative design for superior sound coverageThe JBL CBT 100LA-1 handles up to 325 watts of power to drive an array of 16 full-range 2″ speakers. That may not seem like much, but 10 years of research have created a column speaker that uses analog delay beam-forming and amplitude tapering to make sure directivity is even across the CBT 100LA-1’s extended 80Hz-20kHz frequency range. The result is even, balanced sound without frequency lobing inconsistencies as you move around the coverage area. Best of all, you can switch between 40-degree vertical dispersion (for medium-throw coverage in smaller rooms) and 15-degree vertical dispersion (for long-throw coverage in larger rooms).

    Perfect for performance and speechAny place you need clear, balanced sound that covers a large area well, the JBL CBT 100LA-1 will deliver. Switchable voicings let the CBT 100LA-1 use a flat frequency response for music playback, as well as a speech mode with a midrange presence boost. It’s ideal for school auditoriums and churches, allowing your message to be heard clearly throughout the room. Anywhere you have a large room that requires lots of coverage without the compromise of dead spots or frequency lobing, the CBT 100LA-1 is ready to perform.

    Easy to installJBL’s CBT 100LA-1 column speakers come with a swiveling wall bracket, and also have 10 threaded insert points on the rear of the fiberglass reinforced ABS cabinet. Contractors love how easy it is to install the CBT series, and it’s easy to position them for the maximum coverage in your room. Call us to find out more about how to integrate the CBT 100LA-1 into your sound system!

    JBL CBT 100LA-1 Passive Speaker Features:

    • Passive column speaker for installation with incredibly balanced horizontal and vertical directivity
    • 325W RMS power handling 2 hours continuous operation, 200W RMS power handling 100 hours continuous
    • 80Hz-20kHz frequency range is perfect for both music or speech
    • Switchable voicing adds a presence boost for speech applications
    • SonicGuard overload protection prevents distortion
    • Built-in 70V/100V transformer, and 8 ohm direct capability, for flexible installation
    • Color: Black

    Fill your room with exceptional sound, with the JBL CBT 100LA-1 passive speaker!

    Quick View
X