Powered Speakers

Showing 81–96 of 110 results

  • 0 out of 5

    Yamaha DZR15 Powered Speakers

    Power, Performance, and Easy System Integration

    The Yamaha DZR15 offers superb clarity and best-in-class SPL performance. This 2-way bi-amped PA speaker boasts a high-power 2,000-watt Class D amplifier, a 34Hz–20kHz frequency range, and can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while optimized presets and an intuitive LCD display make dialing in your settings a piece of cake. As a powered PA speaker, the DZR15 integrates with any configuration. It can also operate effectively as a stage monitor. The DZR15 employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating.

    Sophisticated DSP processing

    Here, we’re impressed by the DZR15’s intelligent DSP processing. Yamaha’s Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion, ensuring smooth frequency response, stunning clarity, and accurate sound imaging. D-Contour is an intelligent multiband compressor that maintains the ultimate in clarity, even when you push the DZR15 to its highest output level. D-Contour features two settings, FOH/MAIN and MONITOR mode, allowing you to fine-tune the DZR15’s sound based on your application. You also get DSP protection that safeguards your power supply, power amplifiers, and transducers against damage. Despite all this powerful DSP, the DZR15 remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.

    Custom-designed transducers

    The Yamaha DZR15 is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a heat-resistant aluminum-cast frame. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful, yet lightweight, neodymium magnet to handle the chest-thumping low end that the DZR15 delivers. The DZR15 isn’t just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction — even at cranked volumes.

    Smart, ultra-flexible design

    The DZR15 integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90×50° dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the DZR15’s constant directivity horn — its innovative design minimizes the roll-off that conventional horns often produce.

    High-power Class D amplifier

    Loaded with 2,000 watts of Class D power, the Yamaha DZR15 is a beast. It delivers an impressive 139dB SPL, so go ahead and crank it up — the DZR15 can take it. Enjoy maximum power, along with stable, worry-free operation, thanks to a universal switching mode power supply. Beyond that, this amp was optimized to match the DZR15’s transducers, ensuring top-tier sound quality.

    Yamaha DZR15 Features:

    • 2-way powered loudspeaker with 2″ HF and 15″ LF drivers
    • Boasts a high-power 2,000-watt Class D amplifier and 34Hz–20kHz frequency range
    • Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion
    • D-Contour is an intelligent multiband compressor that maintains clarity at high output levels
    • FOH/MAIN and MONITOR modes allow you to fine-tune your sound based on your application
    • DSP protection safeguards your power supply, power amplifiers, and transducers against damage
    • Optimized factory presets and intuitive LCD screen make operation easy
    • Great-sounding, custom-designed transducers
    • Rotatable horn allows vertical or horizontal mounting
    • 90×50° dispersion from a vertical position
    • Constant directivity horn supplies smooth, level coverage without roll-off
    • Universal switching mode power supply offers maximum power, along with stable, worry-free operation
    • Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating

    Tech Specs

    • Powered:Yes
    • Power Configuration:Bi-amped Class D
    • Channels:2
    • LF Driver Size:15″ Cone, 3″ Voice Coil with Neodymium Magnet
    • HF Driver Size:2″ HF Compression Driver, 1″ Throat
    • LF Driver Power Amp:850W Continuous
    • HF Driver Power Amp:100W Continuous
    • Total Power:2000W Dynamic Peak
    • Inputs:2 x XLR-1/4″ combo (line in)
    • Outputs:2 x XLR (thru/output)
    • USB:1 x Type A
    • Frequency Range:34Hz-20khz (-10 dB)
    • Crossover Frequency:1.7kHz
    • Maximum Peak SPL:139 dB SPL @ 1m
    • Horizontal Coverage Angle:90 Degrees
    • Vertical Coverage Angle:50 Degrees
    • Signal Processing:PEQ, Delay, Routing, 8 User Presets
    • Enclosure Material:Plywood Cabinet with Polyurea Coating
    • Mounting Options:Pole: 2 x 1.37″ (35mm) socket; Fly: 12 x M10; Floor Wedge
    • Power Source:Standard IEC AC cable
    • Height:30″
    • Width:17.7″
    • Depth:18.1″
    • Weight:55.6 lbs.
    • Manufacturer Part Number:DZR15
    Read more
    Add to wishlist
    Compare
    Quick View
  • 0 out of 5

    Yamaha DZR12 Powered Speakers

    Power, Performance, and Easy System Integration

    The Yamaha DZR12 offers superb clarity and best-in-class SPL performance. This 2-way bi-amped PA speaker boasts a high-power 2,000-watt Class D amplifier, a 39Hz–20kHz frequency range, and can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while optimized presets and an intuitive LCD display make dialing in your settings a piece of cake. As a powered PA speaker, the DZR12 integrates with any configuration. It can also operate effectively as a stage monitor. The DZR12 employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating.

    Sophisticated DSP processing

    Here, we’re impressed by the DZR12’s intelligent DSP processing. Yamaha’s Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion, ensuring smooth frequency response, stunning clarity, and accurate sound imaging. D-Contour is an intelligent multiband compressor that maintains the ultimate in clarity, even when you push the DZR12 to its highest output level. D-Contour features two settings, FOH/MAIN and MONITOR mode, allowing you to fine-tune the DZR12’s sound based on your application. You also get DSP protection that safeguards your power supply, power amplifiers, and transducers against damage. Despite all this powerful DSP, the DZR12 remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.

    Custom-designed transducers

    The Yamaha DZR12 is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a heat-resistant aluminum-cast frame. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful, yet lightweight, neodymium magnet to handle the chest-thumping low end that the DZR12 delivers. The DZR12 isn’t just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction — even at cranked volumes.

    Smart, ultra-flexible design

    The DZR12 integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90×60° dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the DZR12’s constant directivity horn — its innovative design minimizes the roll-off that conventional horns often produce.

    High-power Class D amplifier

    Loaded with 2,000 watts of Class D power, the Yamaha DZR12 is a beast. It delivers an impressive 139dB SPL, so go ahead and crank it up — the DZR12 can take it. Enjoy maximum power, along with stable, worry-free operation, thanks to a universal switching mode power supply. Beyond that, this amp was optimized to match the DZR12’s transducers, ensuring top-tier sound quality.

    Yamaha DZR12 Features:

    • 2-way powered loudspeaker with 2″ HF and 12″ LF drivers
    • Boasts a high-power 2,000-watt Class D amplifier and 39Hz–20kHz frequency range
    • Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion
    • D-Contour is an intelligent multiband compressor that maintains clarity at high output levels
    • FOH/MAIN and MONITOR modes allow you to fine-tune your sound based on your application
    • DSP protection safeguards your power supply, power amplifiers, and transducers against damage
    • Optimized factory presets and intuitive LCD screen make operation easy
    • Great-sounding, custom-designed transducers
    • Rotatable horn allows vertical or horizontal mounting
    • 90×60° dispersion from a vertical position
    • Constant directivity horn supplies smooth, level coverage without roll-off
    • Universal switching mode power supply offers maximum power, along with stable, worry-free operation
    • Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating

    Tech Specs

    • Powered:Yes
    • Power Configuration:Bi-amped Class D
    • Channels:2
    • LF Driver Size:12″ Cone, 3″ Voice Coil with Neodymium Magnet
    • HF Driver Size:2″ HF Compression Driver, 1″ Throat
    • LF Driver Power Amp:850W Continuous
    • HF Driver Power Amp:100W Continuous
    • Total Power:2000W Dynamic Peak
    • Inputs:2 x XLR-1/4″ combo (line in)
    • Outputs:2 x XLR (thru/output)
    • USB:1 x Type A
    • Frequency Range:39Hz-20khz (-10 dB)
    • Crossover Frequency:1.8kHz
    • Maximum Peak SPL:139 dB SPL @ 1m
    • Horizontal Coverage Angle:90 Degrees
    • Vertical Coverage Angle:60 Degrees
    • Signal Processing:PEQ, Delay, Routing, 8 User Presets
    • Enclosure Material:Plywood Cabinet with Polyurea Coating
    • Mounting Options:Pole: 2 x 1.37″ (35mm) socket; Fly: 12 x M10; Floor Wedge
    • Power Source:Standard IEC AC cable
    • Height:25.4″
    • Width:16.1″
    • Depth:15.5″
    • Weight:47.2 lbs.
    • Manufacturer Part Number:DZR12
    Read more
    Add to wishlist
    Compare
    Quick View
  • 0 out of 5

    Yamaha DZR10 Powered Speakers

    Power, Performance, and Easy System Integration

    The Yamaha DZR10 offers superb clarity and best-in-class SPL performance. This 2-way bi-amped PA speaker boasts a high-power 2,000-watt Class D amplifier, a 44Hz–20kHz frequency range, and can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while optimized presets and an intuitive LCD display make dialing in your settings a piece of cake. As a powered PA speaker, the DZR10 integrates with any configuration. It can also operate effectively as a stage monitor. The DZR10 employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating.

    Sophisticated DSP processing

    Here, we’re impressed by the DZR10’s intelligent DSP processing. Yamaha’s Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion, ensuring smooth frequency response, stunning clarity, and accurate sound imaging. D-Contour is an intelligent multiband compressor that maintains the ultimate in clarity, even when you push the DZR10 to its highest output level. D-Contour features two settings, FOH/MAIN and MONITOR mode, allowing you to fine-tune the DZR10’s sound based on your application. You also get DSP protection that safeguards your power supply, power amplifiers, and transducers against damage. Despite all this powerful DSP, the DZR10 remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.

    Custom-designed transducers

    The Yamaha DZR10 is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a heat-resistant aluminum-cast frame. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful, yet lightweight, neodymium magnet to handle the chest-thumping low end that the DZR10 delivers. The DZR10 isn’t just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction — even at cranked volumes.

    Smart, ultra-flexible design

    The DZR10 integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90×60° dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the DZR10’s constant directivity horn — its innovative design minimizes the roll-off that conventional horns often produce.

    High-power Class D amplifier

    Loaded with 2,000 watts of Class D power, the Yamaha DZR10 is a beast. It delivers an impressive 137dB SPL, so go ahead and crank it up — the DZR10 can take it. Enjoy maximum power, along with stable, worry-free operation, thanks to a universal switching mode power supply. Beyond that, this amp was optimized to match the DZR10’s transducers, ensuring top-tier sound quality.

    Yamaha DZR10 Features:

    • 2-way powered loudspeaker with 2″ HF and 10″ LF drivers
    • Boasts a high-power 2,000-watt Class D amplifier and 44Hz–20kHz frequency range
    • Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion
    • D-Contour is an intelligent multiband compressor that maintains clarity at high output levels
    • FOH/MAIN and MONITOR modes allow you to fine-tune your sound based on your application
    • DSP protection safeguards your power supply, power amplifiers, and transducers against damage
    • Optimized factory presets and intuitive LCD screen make operation easy
    • Great-sounding, custom-designed transducers
    • Rotatable horn allows vertical or horizontal mounting
    • 90×60° dispersion from a vertical position
    • Constant directivity horn supplies smooth, level coverage without roll-off
    • Universal switching mode power supply offers maximum power, along with stable, worry-free operation
    • Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating

    Tech Specs

    • Powered:Yes
    • Power Configuration:Bi-amped
    • Channels:2
    • LF Driver Size:10″ Cone, 3″ Voice Coil with Neodymium Magnet
    • HF Driver Size:2″ HF Compression Driver, 1″ Throat
    • LF Driver Power Amp:1000W Peak, 920W Continuous
    • HF Driver Power Amp:1000W Peak, 380W Continuous
    • Total Power:2000W Class D Peak, 1300W Continuous
    • Inputs:2 x XLR-1/4″ combo (line in)
    • Outputs:2 x XLR (thru/output)
    • USB:1 x Type A
    • Frequency Range:44Hz-20kHz (-10 dB)
    • Crossover Frequency:1.8kHz
    • Maximum Peak SPL:137 dB SPL @ 1m
    • Horizontal Coverage Angle:90 Degrees
    • Vertical Coverage Angle:60 Degrees
    • Signal Processing:PEQ, Delay, Routing, 8 User Presets
    • Enclosure Material:Plywood Cabinet with Polyurea Coating
    • Mounting Options:Pole: 2 x 1.37″ (35mm) socket; Fly: 8 x M10, 2 x M8; Floor Wedge
    • Power Source:Standard IEC AC cable
    • Height:21.1″ (with feet)
    • Width:12.4″
    • Depth:13.6″
    • Weight:39.5 lbs.
    • Manufacturer Part Number:DZR10
    Read more
    Add to wishlist
    Compare
    Quick View
  • 0 out of 5

    Yamaha DXS18XLF Powered Subwoofer

    Power, Performance, and Easy System Integration

    The Yamaha DXS18XLF offers thunderous low end, superb clarity, and best-in-class SPL performance. This powered bass-reflex subwoofer boasts a high-power 1,600-watt Class D amplifier, a 30Hz–150Hz frequency range, and can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while optimized presets and an intuitive LCD display make dialing in your settings a piece of cake. This sub employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating. The DXS18XLF is a must-have for completing your full-range DZR system.

    Sophisticated DSP processing

    Here, we’re impressed by the DXS18XLF’s intelligent DSP processing. Yamaha’s D-XSUB LF processing gives you total command of your low end. Choose between a NORMAL mode that offers balanced low-frequency response and a BOOST mode that provides tighter, more focused bass with extra punch. Beyond that, XTENDED LF mode drops your low-end even lower, yielding chest-thumping low-frequencies that must be heard to be believed. Ensure a clean stage monitoring environment, thanks to the DXS18XLF’s Cardioid Mode, which effectively decreases the sound pressure onstage while increasing the low-frequency output directed towards your audience. Despite all this powerful DSP, the DXS18XLF remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.

    Custom-designed transducer

    The Yamaha DXS18XLF is loaded with a great-sounding, custom-designed transducer. Its durable die-cast aluminum frame and 4-inch voice coil deliver impressive bass response, even at cranked volumes. Experience extraordinary low-frequency linearity, thanks to the DXS18XLF’s dual damper, which mitigates unwanted vibration during high-output situations.

    Yamaha DXS15XLF Features:

    • Powered subwoofer with 18″ LF driver
    • A must-have for completing your full-range DZR system
    • Boasts a high-power 1,600-watt Class D amplifier and 30Hz–150Hz frequency range
    • D-XSUB LF processing gives you total command of your low end with NORMAL, BOOST, and XTENDED LF modes
    • Cardioid Mode decreases stage volume while increasing the low-frequency output directed towards your audience
    • Optimized factory presets and intuitive LCD screen make operation easy
    • Great-sounding, custom-designed transducer
    • Dual damper ensures extraordinary low-frequency linearity during high-output situations
    • Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating

    Tech Specs

    • Powered/Unpowered:Powered
    • LF Driver Size:18″ Cone, 4″ Voice Coil, Ferrite Magnet
    • Power Rating:1230W Continuous
    • Total Power:1600W Peak
    • Inputs:2 x XLR-1/4″ combo
    • Outputs:2 x XLR (thru/output)
    • Other I/O:1 x USB Type A
    • Frequency Range:30Hz-150hz (-10 dB)
    • Maximum Peak SPL:136dB SPL @ 1m
    • Signal Processing:EQ, Delay, Cardioid Mode, D-XSUB Processing
    • Mounting Options:Floor, Pole Mount with 1.37″ (35mm) and M20 sockets
    • Power Source:Standard IEC AC cable
    • Enclosure Material:Plywood Cabinet with Polyurea Coating, Black Finish
    • Height:25.9″ (with feet)
    • Width:21.7″
    • Depth:28.3″
    • Weight:107.8 lbs.
    • Manufacturer Part Number:DXS18XLF
    Read more
    Add to wishlist
    Compare
    Quick View
  • 0 out of 5

    Yamaha DXS15XLF Powered Subwoofer

    Power, Performance, and Easy System Integration

    The Yamaha DXS15XLF offers thunderous low end, superb clarity, and best-in-class SPL performance. This powered bass-reflex subwoofer boasts a high-power 1,600-watt Class D amplifier, a 33Hz–150Hz frequency range, and can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while optimized presets and an intuitive LCD display make dialing in your settings a piece of cake. This sub employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating. The DXS15XLF is a must-have for completing your full-range DZR system.

    Sophisticated DSP processing

    Here , we’re impressed by the DXS15XLF’s intelligent DSP processing. Yamaha’s D-XSUB LF processing gives you total command of your low end. Choose between a NORMAL mode that offers balanced low-frequency response and a BOOST mode that provides tighter, more focused bass with extra punch. Beyond that, XTENDED LF mode drops your low-end even lower, yielding chest-thumping low-frequencies that must be heard to be believed. Ensure a clean stage monitoring environment, thanks to the DXS15XLF’s Cardioid Mode, which effectively decreases the sound pressure onstage while increasing the low-frequency output directed towards your audience. Despite all this powerful DSP, the DXS15XLF remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.

    Custom-designed transducer

    The Yamaha DXS15XLF is loaded with a great-sounding, custom-designed transducer. Its durable die-cast aluminum frame and 4-inch voice coil deliver impressive bass response, even at cranked volumes. Experience extraordinary low-frequency linearity, thanks to the DXS15XLF’s dual damper, which mitigates unwanted vibration during high-output situations.

    Yamaha DXS15XLF Features:

    • Powered subwoofer with 15″ LF driver
    • A must-have for completing your full-range DZR system
    • Boasts a high-power 1,600-watt Class D amplifier and 33Hz–150Hz frequency range
    • D-XSUB LF processing gives you total command of your low end with NORMAL, BOOST, and XTENDED LF modes
    • Cardioid Mode decreases stage volume while increasing the low-frequency output directed towards your audience
    • Optimized factory presets and intuitive LCD screen make operation easy
    • Great-sounding, custom-designed transducer
    • Dual damper ensures extraordinary low-frequency linearity during high-output situations
    • Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating

    Tech Specs

    • Powered/Unpowered:Powered
    • LF Driver Size:15″ Cone, 4″ Voice Coil, Ferrite Magnet
    • Power Rating:1230W Continuous
    • Total Power:1600W Peak
    • Inputs:2 x XLR-1/4″ combo
    • Outputs:2 x XLR (thru/output)
    • Other I/O:1 x USB Type A
    • Frequency Range:33Hz-150hz (-10 dB)
    • Maximum Peak SPL:136dB SPL @ 1m
    • Signal Processing:EQ, Delay, Cardioid Mode, D-XSUB Processing
    • Mounting Options:Floor, Pole Mount with 1.37″ (35mm) and M20 sockets
    • Power Source:Standard IEC AC cable
    • Enclosure Material:Plywood Cabinet with Polyurea Coating, Black Finish
    • Height:23.1″
    • Width:17.7″
    • Depth:23.6″
    • Weight:88.2 lbs.
    • Manufacturer Part Number:DXS15XLF
    Read more
    Add to wishlist
    Compare
    Quick View
  • 0 out of 5

    Yamaha DXR15 MKII Powered Speakers

    You’ll Love the Sound of These Versatile PA Speakers

    You’ll be amazed at the sonic clarity and depth you get from Yamaha’s DXR15mkII powered loudspeakers, part of their DXR/DXS line of Class D–powered PA speakers. Housed in durable, compact ABS enclosures, the 15″ DXR15mkII 2-way speakers represent Yamaha’s latest sound reinforcement technology. While they’re ready for duty as part of a full-scale stage rig, DXR15mkII speakers pack maximum performance into an efficient design that’s also perfect for gigging musicians. And thanks to the built-in 3-channel mixer, the DXR15mkII is perfect for those times when you need sound reinforcement but don’t need an entire PA system. Whether you’re playing pre-recorded music or performing for a crowd, you’ll love the transparent sound of Yamaha’s DXR15mkII powered loudspeakers.

    Consistent clarity and balance at any volume

    While any loudspeaker’s tonal balance can vary depending on its output level, the DXR15mkII features Yamaha’s D-Countour intelligent multiband compressor to maintain its sonic integrity at any volume. D-Contour constantly monitors multiple frequency bands, and makes real-time adjustments to keep the balance consistent — it won’t mess with your mix, it just ensures your mix stays the same at any volume level. And live sound engineers appreciate the flexibility to choose from two operational modes (FOH/Main or Monitor) to optimize the frequency balance depending on your application.

    Full and detailed imaging thanks to advanced FIR-X tuning

    Many loudspeakers exhibit a loss of clarity and/or volume in frequencies near their crossover points, but the Yamaha DXR15mkII maintains clear sound thanks to advanced FIR-X crossover tuning. Utilizing ultra-precise 48-bit DSP, FIR-X optimizes frequencies and phase relationships to practically eliminate crossover distortion. The result is a smooth, balanced response around the crossover frequencies and a better-sounding performance overall.

    Built-in 3-channel mixer

    While multiple DXR15mkII powered loudspeakers make a great sound system — especially when paired with a Yamaha DXS subwoofer — what about those situations where you just need a little bit of reinforcement without an entire sound system? Just turn the DXR15mkII around, and connect up to three microphones or line-level signals for instant amplification. The versatile nature of the DXR15mkII makes it the ideal loudspeaker for solo musicians, as well as schools and houses of worship that need a flexible sound system for multiple applications.

    Yamaha DXR15 mkII Powered Loudspeaker Features:

    • High-powered portable loudspeaker with multi-use flexibility
    • 15″ speaker, powered by 1,100 watts of peak power in a 2-way design
    • Built-in 3-channel mixer lets you connect microphones or line-level sources directly without an entire PA system
    • Built-in DSP for phase optimization and transparent dynamic control
    • ABS cabinet is durable, with a low-resonance design for maximum sound quality

    Tech Specs

    • Powered:Yes
    • Power Configuration:Bi-amped
    • Channels:3-channel mixer
    • LF Driver Size:15″ woofer
    • HF Driver Size:1.75″ Neodymium compression driver
    • LF Driver Power Amp:950W
    • HF Driver Power Amp:150W
    • Total Power:1100W Class D
    • Inputs:1 x XLR-1/4″ combo (mic/line), 2 x 1/4″ (L/Mono, R), Dual RCA Stereo
    • Outputs:1 x XLR (link out), 1 x XLR (thru)
    • Frequency Range:49Hz-20khz
    • Crossover Frequency:2100 Hz
    • Maximum Peak SPL:134 dB SPL @ 1m
    • Horizontal Coverage Angle:90°
    • Vertical Coverage Angle:60°
    • Enclosure Material:ABS
    • Mounting Options:Pole, Floor Wedge, Fly
    • Power Source:Standard IEC AC cable
    • Height:27.5″
    • Width:17.5″
    • Depth:15″
    • Weight:48.1 lbs.
    • Manufacturer Part Number:DXR15mkII
    Read more
    Add to wishlist
    Compare
    Quick View
  • 0 out of 5

    Yamaha DXR12 MKII Powered Speakers

    You’ll Love the Sound of These Versatile PA Speakers

    You’ll be amazed at the sonic clarity and depth you get from Yamaha’s DXR12mkII powered loudspeakers, part of their DXR/DXS line of Class D–powered PA speakers. Housed in durable, compact ABS enclosures, the 12″ DXR12mkII 2-way speakers represent Yamaha’s latest sound reinforcement technology. While they’re ready for duty as part of a full-scale stage rig, DXR12mkII speakers pack maximum performance into an efficient design that’s also perfect for gigging musicians. And thanks to the built-in 3-channel mixer, the DXR12mkII is perfect for those times when you need sound reinforcement but don’t need an entire PA system. Whether you’re playing pre-recorded music or performing for a crowd, you’ll love the transparent sound of Yamaha’s DXR12mkII powered loudspeakers.

    Consistent clarity and balance at any volume

    While any loudspeaker’s tonal balance can vary depending on its output level, the DXR12mkII features Yamaha’s D-Contour intelligent multiband compressor to maintain its sonic integrity at any volume. D-Contour constantly monitors multiple frequency bands, and makes real-time adjustments to keep the balance consistent — it won’t mess with your mix, it just ensures your mix stays the same at any volume level. And live sound engineers  appreciate the flexibility to choose from two operational modes (FOH/Main or Monitor) to optimize the frequency balance depending on your application.

    Full and detailed imaging thanks to advanced FIR-X tuning

    Many loudspeakers exhibit a loss of clarity and/or volume in frequencies near their crossover points, but the Yamaha DXR12mkII maintains clear sound thanks to advanced FIR-X crossover tuning. Utilizing ultra-precise 48-bit DSP, FIR-X optimizes frequencies and phase relationships to practically eliminate crossover distortion. The result is a smooth, balanced response around the crossover frequencies and a better-sounding performance overall.

    Built-in 3-channel mixer

    While multiple DXR12mkII powered loudspeakers make a great sound system — especially when paired with a Yamaha DXS subwoofer — what about those situations where you just need a little bit of reinforcement without an entire sound system? Just turn the DXR12mkII around, and connect up to three microphones or line-level signals for instant amplification. The versatile nature of the DXR12mkII makes it the ideal loudspeaker for solo musicians, as well as schools and houses of worship that need a flexible sound system for multiple applications.

    Yamaha DXR12mkII Powered Loudspeaker Features:

    • High-powered portable loudspeaker with multi-use flexibility
    • 12″ speaker, powered by 1,100 watts of peak power in a 2-way design
    • Built-in 3-channel mixer lets you connect microphones or line-level sources directly without an entire PA system
    • Built-in DSP for phase optimization and transparent dynamic control
    • ABS cabinet is durable, with a low-resonance design for maximum sound quality

    Tech Specs

    • Powered:Yes
    • Power Configuration:Bi-amped
    • Channels:3-channel mixer
    • LF Driver Size:12″ woofer
    • HF Driver Size:1.75″ Neodymium compression driver
    • LF Driver Power Amp:950W
    • HF Driver Power Amp:150W
    • Total Power:1100W Class D
    • Inputs:1 x XLR (mic/line), 2 x 1/4″ (L/mono, R), 1 x Dual RCA Stereo
    • Outputs:1 x XLR (link out), 1 x XLR (thru)
    • Frequency Range:52Hz-20khz
    • Crossover Frequency:2100 Hz
    • Maximum Peak SPL:134 dB SPL
    • Horizontal Coverage Angle:90°
    • Vertical Coverage Angle:60°
    • Signal Processing:100Hz/120Hz Highpass Filter, D-Contour Multi-band Compression
    • Enclosure Material:ABS
    • Mounting Options:Pole, Floor Wedge, Fly
    • Power Source:Standard IEC AC cable
    • Height:23.6″
    • Width:14.25″
    • Depth:13.75″”
    • Weight:41 lbs.
    • Manufacturer Part Number:DXR12mkII
    Read more
    Add to wishlist
    Compare
    Quick View
  • 0 out of 5

    Yamaha DBR15 Powered Speakers

    A Versatile, High-performance PA Speaker from Yamaha

    The Yamaha DBR15 15″ active speaker is able to withstand a whopping 132dB SPL, while still delivering an accurate, controlled performance. Using the latest DSP, Yamaha applied their proprietary FIR-X tuning to optimize the sound and protection algorithms of the DBR15, giving you plenty of muscle, despite this active speaker’s rather diminutive size. Incredibly versatile, you can use the DBR15 as a great-sounding main speaker or as a high-performance floor monitor with a quick flick of the Yamaha DBR15 15″ active speaker’s D-Contour switch. A switchable highpass filter also makes it easy for you to add a subwoofer to your rig.

    Yamaha DBR15 15″ Active Speaker Features at a Glance:

    Read more
    Add to wishlist
    Compare
    Quick View
  • 0 out of 5

    Yamaha DBR12 Powered Speakers

    A Portable, High-performance PA Speaker from Yamaha

    Able to withstand a whopping 131dB SPL, the Yamaha DBR12 12″ active speaker gives you an accurate, controlled performance. Using the latest DSP, Yamaha applied their proprietary FIR-X tuning to optimize the sound and protection algorithms of the DBR12, providing you with plenty of muscle, despite this active speaker’s rather diminutive size. Incredibly versatile, you can use the DBR12 as a great-sounding main speaker or as a high-performance floor monitor with a quick flick of the Yamaha DBR12 12″ active speaker’s D-Contour switch. A switchable highpass filter also makes it easy for you to add a subwoofer to your rig.

    Read more
    Add to wishlist
    Compare
    Quick View
  • SOLD OUT
    0 out of 5

    Yamaha DBR10 Powered Speakers

    A Great-sounding Portable PA Speaker from Yamaha

    Delivering an accurate, controlled performance, the Yamaha DBR10 10″ active speaker can withstand a whopping 129dB SPL. Using the latest DSP, Yamaha applied their proprietary FIR-X tuning to optimize the sound and protection algorithms of the DBR10, providing you with plenty of muscle, despite this active speaker’s rather diminutive size. Incredibly versatile, you can use the DBR10 as a great-sounding main speaker or as a high-performance floor monitor with a quick flick of the Yamaha DBR10 10″ active speaker’s D-Contour switch. A switchable highpass filter also makes it easy for you to add a subwoofer to your rig.

    Read more
    Add to wishlist
    Compare
    Quick View
  • 0 out of 5

    JBL IRX108BT Powered Speakers

     ₹29,800.00

    High-powered Active Speaker with Bluetooth

    The JBL IRX-108BT combines ample volume, powerful features, and extreme ease-of-use into a lightweight, power-packed enclosure. This 1,000-watt active speaker boasts a wide frequency response for top-notch audio reproduction, along with essentials like feedback suppression, 1-touch ducking, and real-world EQ presets that make optimizing your sound child’s play. Two XLR/TRS combo inputs and one XLR output offer a range of connectivity choices. You also get built-in Bluetooth integration, enabling you to stream music from your tablet, phone, or other smart device. Complete with an ultra-rugged honeycomb steel grille and ergonomic handles, the IRX-108BT takes all of the guesswork out of building a high-powered live rig.

    Add to cart
    Add to wishlist
    Compare
    Quick View
  • 0 out of 5

    JBL IRX112BT Powered Speakers

     ₹44,999.00

    High-powered Active Speaker with Bluetooth

    The JBL IRX-112BT combines ample volume, powerful features, and extreme ease-of-use into a lightweight, power-packed enclosure. This 1,300-watt active speaker boasts a wide frequency response for top-notch audio reproduction, along with essentials like feedback suppression, 1-touch ducking, and real-world EQ presets that make optimizing your sound child’s play. Two XLR/TRS combo inputs and one XLR output offer a range of connectivity choices. You also get built-in Bluetooth integration, enabling you to stream music from your tablet, phone, or other smart device. Complete with an ultra-rugged honeycomb steel grille and ergonomic handles, the IRX-112BT takes all of the guesswork out of building a high-powered live rig.

    Jam-packed with useful features

    The IRX-112BT is jam-packed with useful features. Stop feedback before it starts with dbx AFS feedback suppression, while four real-world EQ presets make tailoring your sound to your application a breeze. 1-touch ducking automatically lowers music volume when you speak into a microphone, resulting in much-improved intelligibility. Two XLR/TRS combo inputs accept mic or line sources, while an XLR output makes expanding your setup easy. Bluetooth integration enables you to stream audio from your tablet, phone, or other smart device — ideal for backing tracks or break music. Here, we’ve found the IRX-112BT to be a dead-simple way to achieve high-quality live sound.

    JBL IRX-112BT Powered Speaker Features:

    • 1,300W active speaker offers enough power for most applications
    • dbx AFS feedback suppression stops feedback before it starts
    • 4 real-world EQ presets make tailoring your sound to your application a breeze
    • 1-touch ducking automatically lowers music volume when you speak into a microphone
    • 2 XLR/TRS combo inputs accept mic or line sources
    • XLR output makes expanding your setup easy
    • Bluetooth integration enables you to stream audio from your smart device
    • Ergonomic handles make transportation a cinch
    • Built-in pole mount for easy positioning
    • Can be used as a wedge monitor
    • Ultra-rugged honeycomb steel grille

    Tech Specs

    • Powered:Yes
    • Power Configuration:Single Amp
    • Channels:2
    • LF Driver Size:12″ woofer
    • Total Power:1300W Peak
    • Inputs:2 x XLR-1/4″ combo (mic/line)
    • Outputs:1 x XLR (thru)
    • Bluetooth:v5.0
    • Wireless:Bluetooth
    • Frequency Response:53Hz-20kHz (±3dB)
    • Maximum Peak SPL:129 dB SPL
    • Horizontal Coverage Angle:90°
    • Vertical Coverage Angle:60°
    • Signal Processing:4 x EQ Presets, Music Ducking
    • Enclosure Material:Polypropylene Cabinet with Honeycomb Grille
    • Mounting Options:Pole Mount with 1.37″ Socket
    • Power Source:Standard IEC AC cable
    • Height:24.35″
    • Width:15.75″
    • Depth:11.77″
    • Weight:27.3 lbs.
    • Manufacturer Part Number:IRX112BT-NA
    Add to cart
    Add to wishlist
    Compare
    Quick View
  • 0 out of 5

    Electrovoice ETX15P Powered Speakers

    At the heart of the EV ETX line is the ETX-15P. The most common configuration for bands and DJs is the 15 in. woofer and high-frequency horn horn built into a single enclosure. This is the ETX line’s iteration of this popular, time-tested design. A 15 in. speaker can reproduce bass drums, electric bass and powerful bass singers with great effectiveness, and the horn captures guitars, cymbals and the Ts and CHs of a vocalist with great clarity and articulation. The ETX-15P packs 2000 peak watts into this enclosure and provides a sophisticated rear panel for versatile use. Inside each low-profile, tour-grade wood enclosure are a range of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.

    15″ Powered Loudspeaker

    • 15-inch LF SMX woofer
    • 1.25-inch HF titanium compression driver
    • 2000 W Class-D power amplifier with integrated FIR-Drive DSP
    • 135 dB peak SPL
    Buy product
    Add to wishlist
    Compare
    Quick View
  • 0 out of 5

    Electrovoice EKX15P Powered Speakers

    QuickSmartDSP features best-in-class processing, EV’s signature single-knob user interface, and intuitive menu navigation via LCD.

    High-efficiency 1500 W Class D power amplifier delivers up to 134 dB peak SPL on the EKX-15P via high-sensitivity transducers designed and engineered by EV.

    Intelligent thermal management with a variable-speed fan controlled by multiple onboard sensors, ensuring superior performance and reliability in demanding environmental conditions.

    EV-patented Signal Synchronized Transducers™ (SST) waveguide design provides precise and consistent coverage.

    Lightweight, compact 15-mm wood enclosure with internal bracing, durable EVCoat finish, eight M10 threaded mounting points, aluminum pole mounts, and all-metal handles.

    Buy product
    Add to wishlist
    Compare
    Quick View
  • 0 out of 5

    Electrovoice EKX12P Powered Speakers

     ₹95,000.00

    12″ Powered Speaker from E-V

    The EKX series combines legendary EV sound quality and reliability with the latest technology – all in a compact package suitable for a wide range of sound reinforcement scenarios, including musicians/DJs and live/club/installed sound applications. The EKX series features eight models (four powered and four passive), including 12″ and 15″ two-way models and 15″ and 18″ subwoofers. EKX is positioned above the ZLX and ELX series and below the ETX series.

    Electro Voice EKX-12P Powered Loudspeaker Features:

    • QuickSmartDSP features best-in-class processing, EV’s signature single-knob user interface, and intuitive menu navigation via LCD
    • High-efficiency 1500 W Class D power amplifier delivers up to 132 dB peak SPL on the EKX-12P via high-sensitivity transducers designed and engineered by EV
    • Intelligent thermal management with a variable-speed fan controlled by multiple onboard sensors, ensuring superior performance and reliability in demanding environmental conditions
    • EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage
    • Lightweight, compact 15-mm wood enclosure with internal bracing, durable EVCoat finish, eight M10 threaded mounting points, aluminum pole mounts, and all-metal handles

    Tech Specs

    • Powered:Yes
    • LF Driver Size:12″ EVS-12M
    • HF Driver Size:1″ titanium compression driver
    • Total Power:1500W
    • Inputs:2 x XLR-1/4″ combo, 2 x RCA
    • Outputs:1 x XLR
    • Frequency Range:50Hz-20kHz (-3 dB)
    • Frequency Response:60Hz-18kHz (-10 dB)
    • Crossover Frequency:1.7kHz
    • Maximum Peak SPL:132 dB SPL
    • Horizontal Coverage Angle:90°
    • Vertical Coverage Angle:60°
    • Signal Processing:3-band EQ, limiter, Mode and Location presets, Crossover presets
    • Enclosure Material:15mm plywood with EV coat
    • Mounting Options:Pole Mount, Floor Wedge, 8 x M10 Fly Points
    • Height:23.9″
    • Width:14.7″
    • Depth:14″
    • Weight:41.4 lbs.
    • Manufacturer Part Number:F.01U.303.368
    Add to cart
    Add to wishlist
    Compare
    Quick View
  • 0 out of 5

    QSC K12.2 Powered Speakers

     ₹74,999.00

    Upgraded Sound and Double the Power

    The QSC K12.2 offers the familiar voicing, elegant style, and rugged reliability that the K Series is known for, plus double the power, increased SPL, and greater bass extension. Improved DSP management exhibits unprecedented clarity. It’s also deceptively easy to use — the K12.2’s factory presets cover just about any application you can think of. And if you want to tweak things yourself, there are multiple user-adjustable parameters on tap. This lightweight powerhouse is ideal for bands, DJs, and more, and its wide dispersion ensures that your entire audience experiences top-notch sound. Whether you use the QSC K12.2 in a portable or installed situation, you’ll achieve superior results.

    The K.2 Series gives you more of everything

    The K.2 Series is packed with more of everything. Double the power. Higher SPL. Greater low-frequency extension. Experience sublime clarity, thanks to the power boost and improved DSP management, while the higher SPL and greater bass extension injects your performance with chest-thumping vigor. Optimize your system with user-adjustable DSP parameters and presets. Dual pole cups (straight-firing and down-tilt) replace the previous generation’s tilt-direct single cup for added stability. On top of that, every speaker in the K.2 Series can pull double duty as a high-performance floor monitor.

    Get up and running fast with useful presets

    Operating the QSC K12.2 is pure simplicity, thanks to its factory presets. And user-adjustable parameters make creating your own custom configurations a piece of cake. Best of all, you can save your configurations as recallable Scenes, making repeated setups a snap.

    Factory presets cover just about any application you can think of:

    • Dance music
    • Stage monitor
    • Vocal monitor
    • Instrument amplifier
    • and more

    User-adjustable parameters include:

    • EQ
    • Delay
    • Input configuration
    • Crossover
    • and more

    Extensive DSP enhances your system’s performance

    The K12.2 is loaded with powerful DSP to enhance your system’s performance. DMT (Directivity Matched Transition) provides matched low- and high-frequency response across your audience’s entire listening area, eliminating dead and hot zones. Intrinsic Correction ensures that your speaker performs consistently across the entire sound field. It achieves this by mapping spatially averaged measurements to IIR and FIR filters that actively adjust time, frequency, and amplitude response. Here , we’re blown away by the K12.2’s reliable performance — it sounds great in any situation.

    QSC K12.2 Features:

    • Powerful active PA speaker with 12″ LF driver and 1.4″ HF driver
    • 2,000W, efficient and lightweight Class D power module
    • Factory presets cover just about any application you can think of
    • User-adjustable parameters for tweaking your system’s sound
    • Saveable/recallable Scenes make repeated setups a snap
    • Multifunction digital display provides useful at-a-glance information
    • Directivity Matched Transition (DMT) and Intrinsic Correction DSP for accurate, undistorted performance across the entire sound field
    • Doubles as a high-performance floor monitor
    • Dual pole cup mounts (straight-firing and down-tilt) and M10 fittings for flown applications
    • Rugged ABS enclosure

    Tech Specs

    • Powered:Yes
    • Power Configuration:Bi-amped
    • LF Driver Size:12″ woofer
    • HF Driver Size:1.4″ titanium compression driver
    • LF Driver Power Amp:1800W
    • HF Driver Power Amp:225W
    • Total Power:2000W
    • Inputs:2 x XLR-1/4″ combo (mic/line), 1 x 1/8″ (aux stereo in)
    • Outputs:2 x XLR (thru), 1 x XLR (mix out)
    • Frequency Range:45Hz-20kHz
    • Frequency Response:50Hz-20kHz
    • Maximum Peak SPL:132 dB SPL @ 1m
    • Horizontal Coverage Angle:75 Degrees
    • Signal Processing:EQ, Delay, Dynamics, User Scene Presets, Crossover
    • Enclosure Material:ABS plastic enclosure with 18 AWG steel grille
    • Mounting Options:Pole Mount with 1.37″ socket, Floor Wedge, 2 x M10 Fly Points
    • Power Source:Standard IEC AC cable
    • Height:23.7″
    • Width:14″
    • Depth:13.8″
    • Weight:39 lbs.
    • Manufacturer Part Number:K12.2-NA
    Add to cart
    Add to wishlist
    Compare
    Quick View
X