Crown

Showing all 11 results

  • 0 out of 5

    Crown XLi1500 Power Amplifier

    32,999.00

    An Everyday Power Amp You Can Count On!

    Powerful, affordable, reliable – these words define Crown’s XLi 1500 power amplifier as well as the rest of the XLi series amps. Whether you’re a musician, DJ, or live sound engineer, you’re sure to appreciate what this remarkably rugged amplifier can do for your PA system. With user-selectable input sensitivity (.755V or 1.4V) and a host of standard output connectors, the 900-watt XLi 1500 is a perfect fit for mobile rigs, traditional venues, and houses of worship alike. And with over six decades making some of the most popular power amplifiers on Earth, you know you can trust Crown and your XLi 1500 no matter what.

    Crown XLi 1500 Power Amplifier at a Glance:

    • All the versatility you can ask for in a budget-friendly amplifier
    • Packed with the quality I/O your venue or mobile rig demands
    • Smart and rugged design protects against everyday hazards

    All the versatility you can ask for in a budget-friendly amplifierYou know the old adage about how if you ask two live sound engineers how to setup a system you’ll get three answers? Well, this Crown XLi 1500 power amplifier can handle them all. Wether you need an amp that can do stereo, parallel, or bridged-mono mode, XLi series amps will do the trick. Even if you’re constantly reconfiguring your system, you’ll get all the versatility you need from your XLi 1500.

    Packed with the quality I/O your venue or mobile rig demandsNo two rigs are the same, which is why Crown outfitted their XLi amplifiers (including the XLi 1500) with all of the popular connections serious live sound engineers demand. On the input side, the XLi 1500 offers both balanced XLR and unbalanced RCA jacks, accommodating professional mixers and DJ systems alike. Conversely, both low-tech binding posts and modern speakON connectors let you attach any variety of passive PA speakers.

    Smart and rugged design protects against everyday hazardsOne thing no engineer can afford is losing an amp right before (or in the middle of) a show. With a Crown XLi 1500 in your rig, you can worry about setting a good mix, not keeping your amp from exploding. Crown built their XLi series power amplifiers with safety in mind, protecting against shorts, empty loads, on/off thumps, and more. And while they were at it, they even gave the XLi 1500 a mighty effective shield against the kind of RF that can ruin any show, so you don’t have to cringe the next time the talent shows up with their special (read, outdated) wireless system.

    Crown XLi 1500 Power Amplifier Features:

    • An affordable and reliable power amplifier you can use in any PA system
    • 900-watts in bridged-mono mode, up to 450-watts stereo/parallel operation
    • Includes both unbalanced RCA and balanced XLR input connectivity
    • Binding post and speakON output connectors let you use virtually any passive PA speakers
    • Selectable input voltage (.755V or 1.4V) lets you set up your rig to match your gear
    • LED power, fault, signal-presence, and clip indicators let you keep an eye on the safety of your amplifier
    • Forced-air cooling and protection against shorts, no-load, and on/off thumps ensure smooth operation and long life
    • Excellent shielding against radio-frequency interference keeps your sound clean, even in heavy wireless conditions

    Get the power amp you need for a price you can afford with a Crown XLi 1500!

    Tech Specs

    • Number of Channels:2
    • Power Class:Class AB
    • Watts/Side @ 8 ohms:350W
    • Watts/Side @ 4 ohms:450W
    • Watts Bridged:900W @ 8 ohms
    • Inputs:2 x RCA, 2 x XLR
    • Outputs:2 x speakON, 2 x Binding Post
    • Cooling System:Internal heat sinks with forced air plus fan-cooled, speed-regulated, thermal protection and flow-through ventilation from front
    • Rack Spaces:2U
    • Height:3.5″
    • Depth:12.4″
    • Width:19″
    • Weight:28 lbs.
    Quick View
  • 0 out of 5

    Crown XLi2500 Power Amplifier

    34,999.00

    An Everyday Power Amp You Can Count On!

    Powerful, affordable, reliable – these words define Crown’s XLi 2500 power amplifier as well as the rest of the XLi series amps. Whether you’re a musician, DJ, or live sound engineer, you’re sure to appreciate what this remarkably rugged amplifier can do for your PA system. With user-selectable input sensitivity (.755V or 1.4V) and a host of standard output connectors, the 1,500-watt XLi 2500 is a perfect fit for mobile rigs, traditional venues, and houses of worship alike. And with over six decades making some of the most popular power amplifiers on Earth, you know you can trust Crown and your XLi 2500 no matter what.

    Crown XLi 2500 Power Amplifier at a Glance:

    • All the versatility you can ask for in a budget-friendly amplifier
    • Packed with the quality I/O your venue or mobile rig demands
    • Smart and rugged design protects against everyday hazards

    All the versatility you can ask for in a budget-friendly amplifier

    You know the old adage about how if you ask two live sound engineers how to setup a system you’ll get three answers? Well, this Crown XLi 2500 power amplifier can handle them all. Wether you need an amp that can do stereo, parallel, or bridged-mono mode, XLi series amps will do the trick. Even if you’re constantly reconfiguring your system, you’ll get all the versatility you need from your XLi 2500.

    Packed with the quality I/O your venue or mobile rig demands

    No two rigs are the same, which is why Crown outfitted their XLi amplifiers (including the XLi 2500) with all of the popular connections serious live sound engineers demand. On the input side, the XLi 2500 offers both balanced XLR and unbalanced RCA jacks, accommodating professional mixers and DJ systems alike. Conversely, both low-tech binding posts and modern speakON connectors let you attach any variety of passive PA speakers.

    Smart and rugged design protects against everyday hazards

    One thing no engineer can afford is losing an amp right before (or in the middle of) a show. With a Crown XLi 2500 in your rig, you can worry about setting a good mix, not keeping your amp from exploding. Crown built their XLi series power amplifiers with safety in mind, protecting against shorts, empty loads, on/off thumps, and more. And while they were at it, they even gave the XLi 2500 a mighty effective shield against the kind of RF that can ruin any show, so you don’t have to cringe the next time the talent shows up with their special (read, outdated) wireless system.

    Crown XLi 2500 Power Amplifier Features:

    • An affordable and reliable power amplifier you can use in any PA system
    • 1,500-watts in bridged-mono mode, up to 750-watts stereo/parallel operation
    • Includes both unbalanced RCA and balanced XLR input connectivity
    • Binding post and speakON output connectors let you use virtually any passive PA speakers
    • Selectable input voltage (.755V or 1.4V) lets you set up your rig to match your gear
    • LED power, fault, signal-presence, and clip indicators let you keep an eye on the safety of your amplifier
    • Forced-air cooling and protection against shorts, no-load, and on/off thumps ensure smooth operation and long life
    • Excellent shielding against radio-frequency interference keeps your sound clean, even in heavy wireless conditions

    Get the power amp you need for a price you can afford with a Crown XLi 2500!

    Tech Specs

    • Number of Channels:2
    • Power Class:Class AB
    • Watts/Side @ 8 ohms:500W
    • Watts/Side @ 4 ohms:750W
    • Watts Bridged:1,500W @ 8 ohms
    • Inputs:2 x RCA, 2 x XLR
    • Outputs:2 x speakON, 2 x Binding Post
    • Cooling System:Internal heat sinks with forced air plus fan-cooled, speed-regulated, thermal protection and flow-through ventilation from front
    • Rack Spaces:2U
    • Height:3.5″
    • Depth:12.4″
    • Width:19″
    • Weight:29.7 lbs.
    Quick View
  • 0 out of 5

    Crown XLi3500 Power Amplifer

    57,999.00

    An Everyday Power Amp You Can Count On!

    Powerful, affordable, reliable – these words define Crown’s XLi 3500 power amplifier as well as the rest of the XLi series amps. Whether you’re a musician, DJ, or live sound engineer, you’re sure to appreciate what this remarkably rugged amplifier can do for your PA system. With user-selectable input sensitivity (.755V or 1.4V) and a host of standard output connectors, the 2,700-watt XLi 3500 is a perfect fit for mobile rigs, traditional venues, and houses of worship alike. And with over six decades making some of the most popular power amplifiers on Earth, you know you can trust Crown and your XLi 3500 no matter what.

    Crown XLi 3500 Power Amplifier at a Glance:

    • All the versatility you can ask for in a budget-friendly amplifier
    • Packed with the quality I/O your venue or mobile rig demands
    • Smart and rugged design protects against everyday hazards

    All the versatility you can ask for in a budget-friendly amplifierYou know the old adage about how if you ask two live sound engineers how to setup a system you’ll get three answers? Well, this Crown XLi 3500 power amplifier can handle them all. Wether you need an amp that can do stereo, parallel, or bridged-mono mode, XLi series amps will do the trick. Even if you’re constantly reconfiguring your system, you’ll get all the versatility you need from your XLi 3500.

    Packed with the quality I/O your venue or mobile rig demandsNo two rigs are the same, which is why Crown outfitted their XLi amplifiers (including the XLi 3500) with all of the popular connections serious live sound engineers demand. On the input side, the XLi 3500 offers both balanced XLR and unbalanced RCA jacks, accommodating professional mixers and DJ systems alike. Conversely, both low-tech binding posts and modern speakON connectors let you attach any variety of passive PA speakers.

    Smart and rugged design protects against everyday hazardsOne thing no engineer can afford is losing an amp right before (or in the middle of) a show. With a Crown XLi 3500 in your rig, you can worry about setting a good mix, not keeping your amp from exploding. Crown built their XLi series power amplifiers with safety in mind, protecting against shorts, empty loads, on/off thumps, and more. And while they were at it, they even gave the XLi 3500 a mighty effective shield against the kind of RF that can ruin any show, so you don’t have to cringe the next time the talent shows up with their special (read, outdated) wireless system.

    Crown XLi 3500 Power Amplifier Features:

    • An affordable and reliable power amplifier you can use in any PA system
    • 2,700-watts in bridged-mono mode, up to 1350-watts stereo/parallel operation
    • Includes both unbalanced RCA and balanced XLR input connectivity
    • Binding post and speakON output connectors let you use virtually any passive PA speakers
    • Selectable input voltage (.755V or 1.4V) lets you set up your rig to match your gear
    • LED power, fault, signal-presence, and clip indicators let you keep an eye on the safety of your amplifier
    • Forced-air cooling and protection against shorts, no-load, and on/off thumps ensure smooth operation and long life
    • Excellent shielding against radio-frequency interference keeps your sound clean, even in heavy wireless conditions

    Get the power amp you need for a price you can afford with a Crown XLi 3500!

    Tech Specs

    • Number of Channels:2
    • Power Class:Class AB
    • Watts/Side @ 8 ohms:1,000W
    • Watts/Side @ 4 ohms:1,350W
    • Watts Bridged:2,700W @ 8 ohms
    • Inputs:2 x RCA, 2 x XLR
    • Outputs:2 x speakON, 2 x Binding Post
    • Cooling System:Internal heat sinks with forced air plus fan-cooled, speed-regulated, thermal protection and flow-through ventilation from front
    • Rack Spaces:2U
    • Height:3.5″
    • Depth:14.4″
    • Width:19″
    • Weight:43 lbs.
    Quick View
  • 0 out of 5

    Crown XTi6002 Power Amplifier

    125,000.00

    Need Power? Trust Crown!

    Crown does it again! Their power amps are near-legendary, and the XTi 2 series is yet another example of rock-solid, powerful, innovative power amplification. Here, the XTi 6002 is packed with Peak Plus Limiters that give you full control over threshold, attack, and release. What’s more, the Enhanced Subharmonic Synth section gives you control over frequency, gain, and filter type, so you can tune your XTi 6002 to your system. Beyond that, there are three fan modes you can choose from – normal, early, and fullspeed – so you can match the fan performance to your needs. Other noteworthy features include system monitoring for software visibility of AC line voltage and power supply temperature, integrated cast-aluminum handles for easy handling and dependable durability, a locking power cord clip, high-tech control software, and 29 user-definable presets. Bottom line? The XTi 2 series, including the XTi 6002, gives you an excellent solution for power amplification. Choose the one that best meets your power needs.

     

     

    Crown XTi 6002 Features at a Glance:

    • Stereo Wattage: 3000W @ 2 ohms, 2100W @ 4 ohms, 1200W @ 8 ohms
    • Bridged Mono Wattage: 4200W @ 8 ohms, 6000W @ 4 ohms
    • Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
    • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
    • 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
    • New system monitoring provides software visibility of AC line voltage and power supply temperature
    • Integrated cast-aluminum handles for easy handling and enhanced durability
    • Locking power cord clip provides a secure connection between the amplifier and power cord
    • Updated HiQnet Band Manager and System Architect control software
    • Increased number of presets to a total of 30; 29 of which are user definable
    • 20 Amp power

    Trust the Crown XTi 6002 for dependable power amplification!

    Tech Specs

    • Number of Channels:2
    • Watts/Side @ 8 ohms:1200W
    • Watts/Side @ 4 ohms:2100W
    • Watts/Side @ 2 ohms:3000W
    • Watts Bridged:4200W @ 8 ohms
    • Inputs:2 x XLR
    • Outputs:2 x Binding Post, 2 x SpeakON
    • Cooling System:Proportional Speed Fan with Front-to-Rear Airflow
    • DSP:Yes
    • Filters:Yes
    • Rack Spaces:2U
    • Height:3.5″
    • Depth:16.2″
    • Width:19″
    • Weight:24 lbs.
    Quick View
  • 0 out of 5

    Crown XTi4002 Power Amplifier

    68,999.00

    Need Power? Trust Crown!

    Crown does it again! Their power amps are near-legendary, and the XTi 2 series is yet another example of rock-solid, powerful, innovative power amplification. Here, the XTi 4002 is packed with Peak Plus Limiters that give you full control over threshold, attack, and release. What’s more, the Enhanced Subharmonic Synth section gives you control over frequency, gain, and filter type, so you can tune your XTi 4002 to your system. Beyond that, there are three fan modes you can choose from – normal, early, and fullspeed – so you can match the fan performance to your needs. Other noteworthy features include system monitoring for software visibility of AC line voltage and power supply temperature, integrated cast-aluminum handles for easy handling and dependable durability, a locking power cord clip, high-tech control software, and 29 user-definable presets. Bottom line? The XTi 2 series, including the XTi 4002, gives you an excellent solution for power amplification. Choose the one that best meets your power needs.

    Crown XTi 4002 Features at a Glance:

    • Stereo Wattage: 1600W @ 2 ohms, 1200W @ 4 ohms, 650W @ 8 ohms
    • Bridged Mono Wattage: 2400W @ 8 ohms, 3200W @ 4 ohms
    • Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
    • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
    • 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
    • New system monitoring provides software visibility of AC line voltage and power supply temperature
    • Integrated cast-aluminum handles for easy handling and enhanced durability
    • Locking power cord clip provides a secure connection between the amplifier and power cord
    • Updated HiQnet Band Manager and System Architect control software
    • Increased number of presets to a total of 30; 29 of which are user definable

    Trust the Crown XTi 4002 for dependable power amplification!

    Tech Specs

    • Number of Channels:2
    • Watts/Side @ 8 ohms:650W
    • Watts/Side @ 4 ohms:1200W
    • Watts/Side @ 2 ohms:1600W
    • Watts Bridged:2400W @ 8 ohms
    • Inputs:2 x XLR
    • Outputs:2 x Binding Post, 2 x SpeakON
    • Cooling System:Proportional Speed Fan with Front-to-Rear Airflow
    • DSP:Yes
    • Filters:Yes
    • Rack Spaces:2U
    • Height:3.5″
    • Depth:12.25″
    • Width:19″
    • Weight:18.5 lbs.
    Quick View
  • 0 out of 5

    Crown XTi2002 Power Amplifier

    Need Power? Trust Crown!

    Crown does it again! Their power amps are near-legendary, and the XTi 2 series is yet another example of rock-solid, powerful, innovative power amplification. Here, the XTi 2002 is packed with Peak Plus Limiters that give you full control over threshold, attack, and release. What’s more, the Enhanced Subharmonic Synth section gives you control over frequency, gain, and filter type, so you can tune your XTi 2002 to your system. Beyond that, there are three fan modes you can choose from – normal, early, and fullspeed – so you can match the fan performance to your needs. Other noteworthy features include system monitoring for software visibility of AC line voltage and power supply temperature, integrated cast-aluminum handles for easy handling and dependable durability, a locking power cord clip, high-tech control software, and 29 user-definable presets. Bottom line? The XTi 2 series, including the XTi 2002, gives you an excellent solution for power amplification. Choose the one that best meets your power needs.

    Crown XTi 2002 Features at a Glance:

    • Stereo Wattage: 1000W @ 2 ohms, 800W @ 4 ohms, 475W @ 8 ohms
    • Bridged Mono Wattage: 1600W @ 8 ohms, 2000W @ 4 ohms
    • Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
    • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
    • 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
    • New system monitoring provides software visibility of AC line voltage and power supply temperature
    • Integrated cast-aluminum handles for easy handling and enhanced durability
    • Locking power cord clip provides a secure connection between the amplifier and power cord
    • Updated HiQnet Band Manager and System Architect control software
    • Increased number of presets to a total of 30; 29 of which are user definable

    Trust the Crown XTi 2002 for dependable power amplification!

    Tech Specs

    • Number of Channels:2
    • Watts/Side @ 8 ohms:475W
    • Watts/Side @ 4 ohms:800W
    • Watts/Side @ 2 ohms:1000W
    • Watts Bridged:1600W @ 8 ohms
    • Inputs:2 x XLR
    • Outputs:2 x Binding Post, 2 x SpeakON
    • Cooling System:Proportional Speed Fan with Front-to-Rear Airflow
    • DSP:Yes
    • Filters:Yes
    • Rack Spaces:2U
    • Height:3.5″
    • Depth:12.25″
    • Width:19″
    • Weight:18.5 lbs.
    Quick View
  • 0 out of 5

    Crown XTi1002 Power Amplifier

    Need Power? Trust Crown!

    Crown does it again! Their power amps are near-legendary, and the XTi 2 series is yet another example of rock-solid, powerful, innovative power amplification. Here, the XTi 1002 is packed with Peak Plus Limiters that give you full control over threshold, attack, and release. What’s more, the Enhanced Subharmonic Synth section gives you control over frequency, gain, and filter type, so you can tune your XTi 1002 to your system. Beyond that, there are three fan modes you can choose from – normal, early, and fullspeed – so you can match the fan performance to your needs. Other noteworthy features include system monitoring for software visibility of AC line voltage and power supply temperature, integrated cast-aluminum handles for easy handling and dependable durability, a locking power cord clip, high-tech control software, and 29 user-definable presets. Bottom line? The XTi 2 series, including the XTi 1002, gives you an excellent solution for power amplification. Choose the one that best meets your power needs.

    Crown XTi 1002 Features at a Glance:

    • Stereo Wattage: 700W @ 2 ohms, 500W @ 4 ohms, 275W @ 8 ohms
    • Bridged Mono Wattage: 1000W @ 8 ohms, 1400W @ 4 ohms
    • Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
    • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
    • 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
    • New system monitoring provides software visibility of AC line voltage and power supply temperature
    • Integrated cast-aluminum handles for easy handling and enhanced durability
    • Locking power cord clip provides a secure connection between the amplifier and power cord
    • Updated HiQnet Band Manager and System Architect control software
    • Increased number of presets to a total of 30; 29 of which are user definable

    Trust the Crown XTi 1002 for dependable power amplification!

    Tech Specs

    • Number of Channels:2
    • Watts/Side @ 8 ohms:275W
    • Watts/Side @ 4 ohms:500W
    • Watts/Side @ 2 ohms:700W
    • Watts Bridged:1000W @ 8 ohms
    • Inputs:2 x XLR
    • Outputs:2 x Binding Post, 2 x SpeakON
    • Cooling System:Proportional Speed Fan with Front-to-Rear Airflow
    • DSP:Yes
    • Filters:Yes
    • Rack Spaces:2U
    • Height:3.5″
    • Depth:12.25″
    • Width:19″
    • Weight:18.5 lbs.
    Quick View
  • 0 out of 5

    Crown XLS1002 Power Amplifier

    31,999.00

    An All-purpose Amp Delivering 350 Watts

    Crown Audio outdid themselves with the XLS 1002, delivering not only a high-performing power amplifier but an affordable one at that. In addition to its sleek look, this amp has a large and vivid LCD screen to monitor your parameters with ease. Loudspeaker matching, multi-filter crossover tuning, and system EQ are just some of the DSP capabilities available to maximize your audio quality.

    Comprehensive controls to dial in the perfect setup

    From managing input sensitivity to toggling amp modes, full customization is only a few clicks away. Included on the front panel is a user-friendly LCD screen, LED level indicators, on/off switch, and dedicated menu buttons. At a glance, the XLS 1002’s rear panel includes an array of inputs to accommodate any audio source. Add additional amps through 1/4-inch line-level outputs, Neutron Speakon outputs and binding posts — all while being protected against overload with the help of a built-in circuit breaker. With a built-in PureBand crossover system, Crown’s XLS 1002 has onboard highpass, lowpass, and band-pass filters that can be set up to 3000Hz with a 24 dB/octave slope.

    A versatile two-channel amp to power any event

    The Crown XLS 1002 can power 2-, 4-, or 8-ohm loads and can be bridged for 4-ohm or 8-ohm mono operation. As a Class D amplifier, you can expect optimal efficiency when driving the most demanding loudspeakers or subwoofers. And when pushing the amp to the limits, the internal heatsink and forced-air fans will automatically cool down the XLS 1002 for consistent reliability and an extended lifespan. Its lightweight design makes this power amp a clear choice for touring musicians or live production companies needing portability.

    Experience Crown’s patented DriveCore technology

    Here, our Sales Engineers are incredibly impressed by the amount of headroom that the Crown XLS 1002 packs under the hood. Their patented DriveCore technology provides an ultra-clean signal in even the most unpredictable live settings, so that you receive powerful, undistorted playback no matter the circumstances. Paired with transparent Peak-x Limiters, the XLS 1002 is a standout solution among Class D power amplifiers. Audiophiles and live sound engineers alike are in for a treat with any of the Crown XLS series power amplifiers.

    Crown XLS 1002 Power Amplifier Features:

    • Class D amp with Crown’s ultra-efficient DriveCore technology
    • Lightweight design weighs less than 9 lbs.
    • Massive DSP capabilities maximize your sound
    • Bandpass filters for crossover tuning, loudspeaker matching, and system EQ
    • Large LCD display lets you keep an eye on your parameters
    • Selectable input sensitivity with 1.4Vrms and .775Vrms options
    • Sleep mode shuts the unit down after a specified time
    • Security setting disables menu buttons
    • System reset allows factory settings to be restored
    • Remote power trigger
    • Peak-x Limiters provide maximum output while protecting your speakers
    • XLR, 1/4″, and RCA inputs provide flexibility
    • Integrated PureBand Crossover System for better performance and control
    • Efficient forced-air fans prevent excessive thermal buildup

    Tech Specs

    • Number of Channels:2
    • Power Class:Class D
    • Watts/Side @ 8 ohms:215W
    • Watts/Side @ 4 ohms:350W
    • Watts/Side @ 2 ohms:550W
    • Watts Bridged:1100W @ 4 ohms, 700W @ 8 ohms
    • Inputs:2 x XLR, 1 x stereo RCA, 2 x 1/4″
    • Outputs:2 x speakON, 2 x Binding Posts
    • Cooling System:Efficient Forced-air Fans
    • DSP:Yes
    • Filters:Yes
    • Rack Spaces:2U
    • Height:3.5″
    • Depth:7.7″
    • Width:19″
    • Weight:8.6 lbs.
    Quick View
  • 0 out of 5

    Crown XLS1502 Power Amplifier

    32,999.00

    An All-purpose Amp Delivering 525 Watts

    Crown Audio outdid themselves with the XLS 1502, delivering not only a high-performing power amplifier but an affordable one at that. In addition to its sleek look, this amp has a large, vivid LCD screen to monitor your parameters with ease. Loudspeaker matching, multi-filter crossover tuning, and system EQ are just some of the DSP capabilities available to maximize your audio quality.

    A versatile 2-channel amp to power any event

    The Crown XLS 1502 can power 2-, 4-, or 8-ohm loads and can be bridged for 4-ohm or 8-ohm mono operation. As a Class D amplifier, you can expect optimal efficiency when driving the most demanding loudspeakers or subwoofers. And when pushing the amp to the limits, the internal heatsink and forced-air fans will automatically cool down the XLS 1502 for consistent reliability and an extended lifespan. Its lightweight design makes this power amp a clear choice for touring musicians or live production companies needing portability.

    Comprehensive controls to dial in the perfect setup

    From managing input sensitivity to toggling amp modes, full customization is only a few clicks away. Included on the front panel is a user-friendly LCD screen, LED level indicators, an on/off switch, and dedicated menu buttons. At a glance, the XLS 1502’s rear panel includes an array of inputs to accommodate any audio source. Add additional amps through 1/4-inch line-level outputs, Neutron Speakon outputs, and binding posts — all while being protected against overload with the help of a built-in circuit breaker. With a built-in PureBand crossover system, Crown’s XLS 1502 has onboard a highpass filter, a lowpass filter, and a band-pass filter — all of which can be set up to 3000Hz with a 24 dB/octave slope.

    Experience Crown Audio’s patented DriveCore technology

    Here, our Sales Engineers are incredibly impressed by the amount of headroom that the Crown XLS 1502 packs under the hood. The company’s patented DriveCore technology provides an ultra-clean signal in even the most unpredictable live settings, so that you receive powerful, undistorted playback no matter the circumstances. Paired with transparent Peakx Limiters, the XLS 1502 is a standout solution among Class D power amplifiers. Audiophiles and live sound engineers alike are in for a treat with any of the Crown XLS series power amplifiers.

    Crown XLS 1502 Power Amplifier Features:

    • Class D amp with Crown’s ultra-efficient DriveCore technology
    • Lightweight design weighs less than 9 lbs.
    • Massive DSP capabilities maximize your sound
    • Bandpass filters for crossover tuning, loudspeaker matching, and system EQ
    • Large LCD display lets you keep an eye on your parameters
    • Selectable input sensitivity with 1.4Vrms and .775Vrms options
    • Sleep mode shuts the unit down after a specified time
    • Security setting disables menu buttons
    • System reset allows factory settings to be restored
    • Remote power trigger
    • Peak-x Limiters provide maximum output while protecting your speakers
    • XLR, 1/4-inch, and RCA inputs provide flexibility
    • Integrated PureBand Crossover System for better performance and control
    • Efficient forced-air fans prevent excessive thermal buildup

    A versatile 2-channel amp to power any event

    The Crown XLS 1502 can power 2-, 4-, or 8-ohm loads and can be bridged for 4-ohm or 8-ohm mono operation. As a Class D amplifier, you can expect optimal efficiency when driving the most demanding loudspeakers or subwoofers. And when pushing the amp to the limits, the internal heatsink and forced-air fans will automatically cool down the XLS 1502 for consistent reliability and an extended lifespan. Its lightweight design makes this power amp a clear choice for touring musicians or live production companies needing portability.

    Comprehensive controls to dial in the perfect setup

    From managing input sensitivity to toggling amp modes, full customization is only a few clicks away. Included on the front panel is a user-friendly LCD screen, LED level indicators, an on/off switch, and dedicated menu buttons. At a glance, the XLS 1502’s rear panel includes an array of inputs to accommodate any audio source. Add additional amps through 1/4-inch line-level outputs, Neutron Speakon outputs, and binding posts — all while being protected against overload with the help of a built-in circuit breaker. With a built-in PureBand crossover system, Crown’s XLS 1502 has onboard a highpass filter, a lowpass filter, and a band-pass filter — all of which can be set up to 3000Hz with a 24 dB/octave slope.

    Experience Crown Audio’s patented DriveCore technology

    At Sweetwater, our Sales Engineers are incredibly impressed by the amount of headroom that the Crown XLS 1502 packs under the hood. The company’s patented DriveCore technology provides an ultra-clean signal in even the most unpredictable live settings, so that you receive powerful, undistorted playback no matter the circumstances. Paired with transparent Peakx Limiters, the XLS 1502 is a standout solution among Class D power amplifiers. Audiophiles and live sound engineers alike are in for a treat with any of the Crown XLS series power amplifiers.

    Crown XLS 1502 Power Amplifier Features:

    • Class D amp with Crown’s ultra-efficient DriveCore technology
    • Lightweight design weighs less than 9 lbs.
    • Massive DSP capabilities maximize your sound
    • Bandpass filters for crossover tuning, loudspeaker matching, and system EQ
    • Large LCD display lets you keep an eye on your parameters
    • Selectable input sensitivity with 1.4Vrms and .775Vrms options
    • Sleep mode shuts the unit down after a specified time
    • Security setting disables menu buttons
    • System reset allows factory settings to be restored
    • Remote power trigger
    • Peak-x Limiters provide maximum output while protecting your speakers
    • XLR, 1/4-inch, and RCA inputs provide flexibility
    • Integrated PureBand Crossover System for better performance and control
    • Efficient forced-air fans prevent excessive thermal buildup
    Quick View
  • 0 out of 5

    Crown XLS2002 Power Amplifier

    31,499.00

    A Clean 650-watt Sound Experience

    Crown gave their DriveCore series a mighty makeover with the XLS 2002 power amplifier. In addition to its sleek look, the XLS 2002 provides you with a large LCD display so you can keep an eye on your parameters, and massive DSP capabilities to maximize the quality of your sound. In addition to highpass and lowpass filters, the XLS 2002 provides you with a bandpass filter on each channel for precise DSP crossover tuning, loudspeaker matching, and system EQ capabilities. Incredibly versatile, the XLS 2002 can power 2-, 4-, or 8-ohm loads and can be bridged for 4-ohm or 8-ohm mono operation. Here, we’re impressed by the amount of headroom that the Crown XLS 2002 power amplifier provides. Expect a powerful, clean, undistorted sound experience!

    Crown XLS 2002 Power Amplifier Features at a Glance:

    • Class D amp with Crown’s ultra-efficient DriveCore technology
    • Lightweight design weighs less than 11 lbs.
    • Massive DSP capabilities maximize your sound
    • Bandpass filters for crossover tuning, loudspeaker matching, and system EQ
    • Large LCD display lets you keep an eye on your parameters
    • Selectable input sensitivity with 1.4Vrms and .775Vrms options
    • Sleep mode shuts the unit down after a specified time
    • Security setting disables menu buttons
    • System reset allows factory settings to be restored
    • Remote power trigger
    • Peak-x Limiters provide maximum output while protecting your speakers
    • XLR, 1/4″, and RCA inputs provide flexibility
    • Integrated PureBand Crossover System for better performance and control
    • Efficient forced-air fans prevent excessive thermal buildup

    Give your gear the power it needs with the trustworthy, rock-solid Crown XLS 2002!

    Tech Specs

    • Number of Channels:2
    • Power Class:Class D
    • Watts/Side @ 8 ohms:375W
    • Watts/Side @ 4 ohms:650W
    • Watts/Side @ 2 ohms:1050W
    • Watts Bridged:2100W @ 4 ohms, 1300W @ 8 ohms
    • Inputs:2 x XLR, 1 x stereo RCA, 2 x 1/4″
    • Outputs:2 x speakON, 2 x Binding Posts
    • Cooling System:Efficient Forced-air Fans
    • DSP:Yes
    • Filters:Yes
    • Rack Spaces:2U
    • Height:3.5″
    • Depth:10.7″
    • Width:19″
    • Weight:10.8 lbs.
    Quick View
  • 0 out of 5

    Crown XLS2502 Power Amplifier

    39,999.00

    A Powerful 775-watt Sound Experience

    The XLS 2502 power amplifier represents a mighty makeover for Crown’s DriveCore series. In addition to its sleek look, the XLS 2502 provides you with a large LCD display so you can keep an eye on your parameters, and massive DSP capabilities to maximize the quality of your sound. In addition to highpass and lowpass filters, the XLS 2502 provides you with a bandpass filter on each channel for precise DSP crossover tuning, loudspeaker matching, and system EQ capabilities. Incredibly versatile, the XLS 2502 can power 2-, 4-, or 8-ohm loads and can be bridged for 4-ohm or 8-ohm mono operation. Here we’re impressed by the amount of headroom that the Crown XLS 2502 power amplifier provides. Expect a powerful, clean, undistorted sound experience!

    Crown XLS 2502 Power Amplifier Features at a Glance:

    • Class D amp with Crown’s ultra-efficient DriveCore technology
    • Lightweight design weighs less than 11 lbs.
    • Massive DSP capabilities maximize your sound
    • Bandpass filters for crossover tuning, loudspeaker matching, and system EQ
    • Large LCD display lets you keep an eye on your parameters
    • Selectable input sensitivity with 1.4Vrms and .775Vrms options
    • Sleep mode shuts the unit down after a specified time
    • Security setting disables menu buttons
    • System reset allows factory settings to be restored
    • Remote power trigger
    • Peak-x Limiters provide maximum output while protecting your speakers
    • XLR, 1/4″, and RCA inputs provide flexibility
    • Integrated PureBand Crossover System for better performance and control
    • Efficient forced-air fans prevent excessive thermal buildup

    Give your gear the power it needs with the trustworthy, rock-solid Crown XLS 2502!

    Tech Specs

    • Number of Channels:2
    • Power Class:Class D
    • Watts/Side @ 8 ohms:440W
    • Watts/Side @ 4 ohms:775W
    • Watts/Side @ 2 ohms:1200W
    • Watts Bridged:2400W @ 4 ohms, 1550W @ 8 ohms
    • Inputs:2 x XLR, 1 x stereo RCA, 2 x 1/4″
    • Outputs:2 x speakON, 2 x Binding Posts
    • Cooling System:Efficient Forced-air Fans
    • DSP:Yes
    • Filters:Yes
    • Rack Spaces:2U
    • Height:3.5″
    • Depth:10.7″
    • Width:19″
    • Weight:10.8 lbs.
    Quick View
X