Products

Showing 129–144 of 1013 results

  • 0 out of 5

    Bose S1 Pro+ Multi-position PA System with Battery

    84,999.00

    Bose’s Most Portable Battery-powered PA Yet

    The Bose S1 Pro+ is an ultra-lightweight, all-in-one PA system that packs a lot of power into its 14.4-pound, multi-position enclosure. Whether you tilt, seat, or mount it, the S1 Pro+ delivers rich, even coverage to an entire room, with Auto EQ to eliminate hotspots on the floor. You get two channels with independent EQ, reverb, and ToneMatch technology to ensure flattering reproduction of voices and instruments, along with a dedicated third channel with an aux input and stereo Bluetooth streaming. Optional transmitters provide a complete wireless experience with microphones and instruments alike, and guitarists will appreciate the S1 Pro+’s built-in FX loop. You also get a livestream mode via USB-C. Moreover, the S1 Pro+’s integrated OLED screens make operating this portable PA an absolute walk in the park. The Bose S1 Pro+ includes a convenient carry handle for lightning-fast load-ins and setups, plus a factory-installed Li-ion battery for the utmost portability.

    More powerful than ever

    The Bose S1 Pro+ offers many advancements over its predecessor. For starters, it weighs a mere 14.4 pounds — you can likely carry it one-handed. It flaunts integrated OLED screens for dead-simple operation; plus, the displays rotate depending on the speaker’s position. You’ll benefit from a full wireless experience with the use of optional transmitters (sold separately), as well as compatibility with the Bose Music App. Stereo Bluetooth streaming is on tap, as is a livestream mode with USB-C. Finally, an FX loop is present on the S1 Pro+’s inputs for use with guitar effects and pedalboards.

    Even coverage with zero hotspots

    Bose sound reinforcement solutions are known for their wide, even coverage, and the S1 Pro+ is no exception. Sound is dispersed not just through the front of the enclosure but the sides as well, for room-filling sound from a single unit. Reviewers were quick to note the Auto EQ feature at work, which keeps the sound consistent as listeners move about a room.

    More than a mere PA

    The Bose S1 Pro+ is a solid PA and a capable wedge monitor, practice amp, and playback system. Whether you’re on the road, practicing at home, or streaming music for parties, you’ll always find a use for the Bose S1 Pro+.

    ToneMatch technology

    The S1 Pro+ includes a streamlined version of Bose’s ToneMatch technology on channels 1 and 2. Use the microphone setting for rich, lush vocal reproduction at a touch, or the guitar setting for pre-programmed settings for your acoustic. ToneMatch can also be toggled off completely.

    Factory-installed Li-ion battery

    Your Bose S1 Pro+ includes a factory-installed Li-ion battery. Enjoy hours of powerful sound reproduction on the go, from the subway to the Siberian Arctic. With Bose, no location is too remote to gig.

    Bose S1 Pro+ Multi-position PA System Features:

    • The ultimate portable PA for soloists, small acts, and event speakers
    • Lightweight — just 14.4 lbs. — with a convenient carry handle
    • Can be tilted, seated, or stand mounted (35mm pole mount)
    • Works great as a wedge monitor or playback system, too
    • Integrated OLED screens facilitate dead-simple operation
    • No hotspots — wide dispersion and Auto EQ deliver even coverage
    • ToneMatch technology offers one-touch vocal and acoustic guitar presets
    • 2 channels with independent EQ and reverb
    • Dedicated 3rd channel for aux input or stereo Bluetooth streaming
    • Full wireless experience with the use of optional transmitters (sold separately)
    • Livestream mode with USB-C
    • FX loop for use with guitar effects and pedalboards
    • Factory-installed Li-ion battery gives you hours of portable playback
    • Compatible with the Bose Music App for easy wireless control

    Tech Specs

    • Type:Powered PA Speaker
    • Speaker Drivers:1 x 6″ LF High Excursion woofer, 3 x 2.25″ HF drivers
    • Number of Mixer Channels:3
    • Number of Mic Preamps:2
    • EQ:2-band Channel EQ
    • Effects:Reverb
    • Inputs:2 x XLR (mic), 1 x 1/4″ TRS (aux), 1 x 1/8″ TRS (aux)
    • Outputs:1 x XLR (line out)
    • USB:1 x Type A, 1 x Type C
    • Bluetooth:Yes
    • Other I/O:2 x Integrated Bose Wireless Receivers
    • Total Power:150W
    • Frequency Response:70Hz-16khz (±3 db)
    • Software:Bose Music App
    • Features:Wireless Transmitter Charging, Live Stream Mode, Microphone EQ Presets
    • Enclosure Material:Polypropylene
    • Mounting Options:1.37″ pole mount, Tilt-back, Floor Monitor
    • Battery-powered:Yes
    • Power Source:Rechargeable battery included (11 hour play time) / Standard IEC AC cable
    • Height:13.1″
    • Width:9.4″
    • Depth:11.1″
    • Weight:14.4 lbs.
    Quick View
  • 0 out of 5

    Boss DD-8 Digital Delay Pedal

    15,499.00

    BOSS DD-8 Digital Delay Pedal:An Ultra-powerful, Compact Digital Delay

    Ever since they released the DM-1 Delay Machine in 1978, the BOSS name has been synonymous with great-sounding delay pedals. The BOSS DD-8 Digital Delay is their most powerful one yet. This compact delay stompbox boasts up to 10 seconds of delay, along with 11 versatile delay modes that range from crystal-clear repeats to glitchy and modulated echoes. The BOSS DD-8 is ideal for practice, soundchecks, and on-the-fly backing tracks, courtesy of its 40-second looper. And synchronizing your repeats to a song is a breeze, thanks to tap tempo. You also get a carryover switch, which enables delay trails to continue after the effect is bypassed. The BOSS DD-8 is teeming with flexible stereo I/O, while three selectable output modes achieve a wide range of effects. The BOSS DD-8 Digital Delay includes external footswitch jacks for on-demand tap tempo, extended looper control, and a captivating Twist effect.

    Quick View
  • 0 out of 5

    Boss Katana 100 MKII Guitar Amplifier

    40,999.00

    New Sounds and Stereo Linking Come to the 100W/1 x 12″ BOSS Katana 100 MKII

    The BOSS Katana 100 MkII is the latest installation in BOSS’s esteemed line of Katana Series amplifiers. And whether you’re interested in accessing its pummeling hundred-watt output section and platform-perfect 12″ speaker to amplify your existing modelers and preamps, or in building your dream tones from the ground up to the create the ultimate all-in-one gig and practice solution, take it from us — the BOSS Katana 100 MkII is a powerful tool in the hands of any electric or acoustic player. Cab-emulated outputs and monitoring make the BOSS Katana 100 MkII a truly silent stage and studio guitar solution, while multi-channel footswitch support provides hands-free remote access to every sound in your arsenal. New amp variations and access to 60 timeless BOSS effects within the BOSS Tone Studio editor make the 100 MkII a tone tweaker’s holiday. There’s even single-cable stereo operation for running dual Katanas from the stage — the perfect way to fill space in a single-guitar outfit.

    Quick View
  • 0 out of 5

    Boss Katana 50 MKII Guitar Amplifier

    23,999.00

    New Sounds and Features Come to the 50W/1 x 12″ Katana

    The BOSS Katana 50 MkII is the latest installation in BOSS’s esteemed line of Katana Series amplifiers. And whether you’re interested in accessing its pummeling hundred-watt output section and platform-perfect 12″ speaker to amplify your existing modelers and preamps, or in building your dream tones from the ground up to the create the ultimate all-in-one gig and practice solution,— the Katana 50 MkII is a powerful tool in the hands of any electric or acoustic player. Cab-emulated outputs and monitoring make the BOSS Katana 50 MkII a truly silent stage and studio guitar solution, while multi-channel footswitch support provides hands-free remote access to every sound in your arsenal. New amp variations and access to 60 timeless BOSS effects within the BOSS Tone Studio editor make the 50 MkII a tone tweaker’s holiday.

    Quick View
  • 0 out of 5

    Boss RC-202 Loop Station

    38,999.00

    Powerful Tabletop Looping and Multi-effects

    The RC-202 Loop Station packs the powerful looping and multi-effects of BOSS’s venerable RC-505 into a 2-track tabletop unit. The RC-202 also shares the RC-505’s distinctive aesthetics and its simple hands-on controls. The RC-202 is primed for live performance – four input effects and four track effects are available simultaneously, and loops can be saved in real time, allowing for fluid creative expression. And if you’re a performing musician, the RC-202’s foot control and MIDI capabilities are second to none, leaving your hands free for playing your guitar, keyboard, or other instrument. The RC-202 is a powerful loop station for club performers, vocalists, keyboardist, or beatboxers.

    BOSS RC-202 Loop Station at a Glance:

    • Two stereo phrase tracks with independent controls
    • Versatile onboard effects offer easy sound enhancement
    • Phrase storage and onboard rhythms

    Two stereo phrase tracks with independent controlsThe RC-202 offers individual controls and animated status indicators for both of its stereo phrase tracks. This allows you to quickly control your performance with the touch of a button, and to play two different loops simultaneously. If you don’t like your mix, simply adjust it with the individual volume faders. These individual controls make for endless creative possibilities.

    Versatile onboard effects offer easy sound enhancementWith an arsenal of built-in effects available at your fingertips, the RC-202 makes it easy to modify your sound as you perform. Use input effects to create unique, robust sound qualities while you’re recording, or employ track effects for real-time processing of loop playback. For overall processing, the RC-202 provides global compression and master reverb effects. Featuring large, easy-to-grab knobs for adjusting parameters and dedicated panel buttons to turn effects on and off, this loop station is a versatile asset to your live performance.

    Phrase storage and onboard rhythmsThe phrase memory feature of the RC-202 allows for the storage of up to 64 different preset settings, as well as phrase track data. If you have a certain setup that you always begin with before every performance, you can save and recall your preferences through the User Set. Also built into this powerful loop station are 17 different rhythm patterns.

    BOSS RC-202 Loop Station Features:

    • Compact tabletop looper with simple hands-on controls
    • 2 stereo phrase tracks with independent controls and status indicators for creative looping
    • 4 Input FX and 4 Track FX simultaneously available for easy sound enhancement
    • 64 phrase memories (8 memories x 8 banks) to store preset settings and track data
    • 17 onboard rhythms (including odd-measure beats) act as backing tracks for loop recording
    • External MIDI control and optional footswitches for remote control
    • USB audio/MIDI interface for phrase import/export and DAW integration
    • XLR mic input with phantom power, mono/stereo instrument inputs, and stereo aux inputs

    For a compact, hands-on looper, turn to the BOSS RC-202 Loop Station!

    Tech Specs

    • Presets:17 onboard rhythm patterns
    • Looper:Two simultaneous stereo phrase tracks, 8 stereo phrases x 8 banks, 3 hours max time
    • Effects:Reverb, Chorus, Tape Echo, Phaser, Ring Modulator, Pitch Shift, Vocoder, Octave, Beat Shift, Compressor and more
    • Analog Inputs:2 x 1/4″ (instrument), 1 x XLR (mic), 1 x 1/8″ TRS (aux in)
    • Analog Outputs:2 x 1/4″ (line out), 1 x 1/8″ (headphones)
    • MIDI I/O:In/Out/USB
    • USB:1 x Type B (DAW integration, Import/Export WAV)
    • Pedal Inputs:1 x 1/4″ (footswitch/expression pedal)
    • Height:2.19″
    • Width:9.44″
    • Depth:6.94″
    • Weight:2 lbs., 2 oz.
    • Manufacturer Part Number:RC-202
    Quick View
  • 0 out of 5

    Cloud Microphones Cloudlifter CL-1 Mic Activator

    18,499.00

    Must-have Tool for Dynamic and Ribbon Mics!

    From stage to studio, the Cloud Microphones Cloudlifter Mic Activator lets you get the best possible audio output from your low-output dynamic and ribbon microphones. The Cloudlifter CL-1 provides up to +25dB of gain that partners with your preamp in amplifying your mics’ signal for clean, transparent recordings. With a Cloudlifter in your rig, you need not hesitate to take full advantage of your favorite ribbon mics and other go-to low-output dynamic mics.

    Quick View
  • 0 out of 5

    Crown XLi1500 Power Amplifier

    32,999.00

    An Everyday Power Amp You Can Count On!

    Powerful, affordable, reliable – these words define Crown’s XLi 1500 power amplifier as well as the rest of the XLi series amps. Whether you’re a musician, DJ, or live sound engineer, you’re sure to appreciate what this remarkably rugged amplifier can do for your PA system. With user-selectable input sensitivity (.755V or 1.4V) and a host of standard output connectors, the 900-watt XLi 1500 is a perfect fit for mobile rigs, traditional venues, and houses of worship alike. And with over six decades making some of the most popular power amplifiers on Earth, you know you can trust Crown and your XLi 1500 no matter what.

    Crown XLi 1500 Power Amplifier at a Glance:

    • All the versatility you can ask for in a budget-friendly amplifier
    • Packed with the quality I/O your venue or mobile rig demands
    • Smart and rugged design protects against everyday hazards

    All the versatility you can ask for in a budget-friendly amplifierYou know the old adage about how if you ask two live sound engineers how to setup a system you’ll get three answers? Well, this Crown XLi 1500 power amplifier can handle them all. Wether you need an amp that can do stereo, parallel, or bridged-mono mode, XLi series amps will do the trick. Even if you’re constantly reconfiguring your system, you’ll get all the versatility you need from your XLi 1500.

    Packed with the quality I/O your venue or mobile rig demandsNo two rigs are the same, which is why Crown outfitted their XLi amplifiers (including the XLi 1500) with all of the popular connections serious live sound engineers demand. On the input side, the XLi 1500 offers both balanced XLR and unbalanced RCA jacks, accommodating professional mixers and DJ systems alike. Conversely, both low-tech binding posts and modern speakON connectors let you attach any variety of passive PA speakers.

    Smart and rugged design protects against everyday hazardsOne thing no engineer can afford is losing an amp right before (or in the middle of) a show. With a Crown XLi 1500 in your rig, you can worry about setting a good mix, not keeping your amp from exploding. Crown built their XLi series power amplifiers with safety in mind, protecting against shorts, empty loads, on/off thumps, and more. And while they were at it, they even gave the XLi 1500 a mighty effective shield against the kind of RF that can ruin any show, so you don’t have to cringe the next time the talent shows up with their special (read, outdated) wireless system.

    Crown XLi 1500 Power Amplifier Features:

    • An affordable and reliable power amplifier you can use in any PA system
    • 900-watts in bridged-mono mode, up to 450-watts stereo/parallel operation
    • Includes both unbalanced RCA and balanced XLR input connectivity
    • Binding post and speakON output connectors let you use virtually any passive PA speakers
    • Selectable input voltage (.755V or 1.4V) lets you set up your rig to match your gear
    • LED power, fault, signal-presence, and clip indicators let you keep an eye on the safety of your amplifier
    • Forced-air cooling and protection against shorts, no-load, and on/off thumps ensure smooth operation and long life
    • Excellent shielding against radio-frequency interference keeps your sound clean, even in heavy wireless conditions

    Get the power amp you need for a price you can afford with a Crown XLi 1500!

    Tech Specs

    • Number of Channels:2
    • Power Class:Class AB
    • Watts/Side @ 8 ohms:350W
    • Watts/Side @ 4 ohms:450W
    • Watts Bridged:900W @ 8 ohms
    • Inputs:2 x RCA, 2 x XLR
    • Outputs:2 x speakON, 2 x Binding Post
    • Cooling System:Internal heat sinks with forced air plus fan-cooled, speed-regulated, thermal protection and flow-through ventilation from front
    • Rack Spaces:2U
    • Height:3.5″
    • Depth:12.4″
    • Width:19″
    • Weight:28 lbs.
    Quick View
  • 0 out of 5

    Crown XLi2500 Power Amplifier

    34,999.00

    An Everyday Power Amp You Can Count On!

    Powerful, affordable, reliable – these words define Crown’s XLi 2500 power amplifier as well as the rest of the XLi series amps. Whether you’re a musician, DJ, or live sound engineer, you’re sure to appreciate what this remarkably rugged amplifier can do for your PA system. With user-selectable input sensitivity (.755V or 1.4V) and a host of standard output connectors, the 1,500-watt XLi 2500 is a perfect fit for mobile rigs, traditional venues, and houses of worship alike. And with over six decades making some of the most popular power amplifiers on Earth, you know you can trust Crown and your XLi 2500 no matter what.

    Crown XLi 2500 Power Amplifier at a Glance:

    • All the versatility you can ask for in a budget-friendly amplifier
    • Packed with the quality I/O your venue or mobile rig demands
    • Smart and rugged design protects against everyday hazards

    All the versatility you can ask for in a budget-friendly amplifier

    You know the old adage about how if you ask two live sound engineers how to setup a system you’ll get three answers? Well, this Crown XLi 2500 power amplifier can handle them all. Wether you need an amp that can do stereo, parallel, or bridged-mono mode, XLi series amps will do the trick. Even if you’re constantly reconfiguring your system, you’ll get all the versatility you need from your XLi 2500.

    Packed with the quality I/O your venue or mobile rig demands

    No two rigs are the same, which is why Crown outfitted their XLi amplifiers (including the XLi 2500) with all of the popular connections serious live sound engineers demand. On the input side, the XLi 2500 offers both balanced XLR and unbalanced RCA jacks, accommodating professional mixers and DJ systems alike. Conversely, both low-tech binding posts and modern speakON connectors let you attach any variety of passive PA speakers.

    Smart and rugged design protects against everyday hazards

    One thing no engineer can afford is losing an amp right before (or in the middle of) a show. With a Crown XLi 2500 in your rig, you can worry about setting a good mix, not keeping your amp from exploding. Crown built their XLi series power amplifiers with safety in mind, protecting against shorts, empty loads, on/off thumps, and more. And while they were at it, they even gave the XLi 2500 a mighty effective shield against the kind of RF that can ruin any show, so you don’t have to cringe the next time the talent shows up with their special (read, outdated) wireless system.

    Crown XLi 2500 Power Amplifier Features:

    • An affordable and reliable power amplifier you can use in any PA system
    • 1,500-watts in bridged-mono mode, up to 750-watts stereo/parallel operation
    • Includes both unbalanced RCA and balanced XLR input connectivity
    • Binding post and speakON output connectors let you use virtually any passive PA speakers
    • Selectable input voltage (.755V or 1.4V) lets you set up your rig to match your gear
    • LED power, fault, signal-presence, and clip indicators let you keep an eye on the safety of your amplifier
    • Forced-air cooling and protection against shorts, no-load, and on/off thumps ensure smooth operation and long life
    • Excellent shielding against radio-frequency interference keeps your sound clean, even in heavy wireless conditions

    Get the power amp you need for a price you can afford with a Crown XLi 2500!

    Tech Specs

    • Number of Channels:2
    • Power Class:Class AB
    • Watts/Side @ 8 ohms:500W
    • Watts/Side @ 4 ohms:750W
    • Watts Bridged:1,500W @ 8 ohms
    • Inputs:2 x RCA, 2 x XLR
    • Outputs:2 x speakON, 2 x Binding Post
    • Cooling System:Internal heat sinks with forced air plus fan-cooled, speed-regulated, thermal protection and flow-through ventilation from front
    • Rack Spaces:2U
    • Height:3.5″
    • Depth:12.4″
    • Width:19″
    • Weight:29.7 lbs.
    Quick View
  • 0 out of 5

    Crown XLi3500 Power Amplifer

    57,999.00

    An Everyday Power Amp You Can Count On!

    Powerful, affordable, reliable – these words define Crown’s XLi 3500 power amplifier as well as the rest of the XLi series amps. Whether you’re a musician, DJ, or live sound engineer, you’re sure to appreciate what this remarkably rugged amplifier can do for your PA system. With user-selectable input sensitivity (.755V or 1.4V) and a host of standard output connectors, the 2,700-watt XLi 3500 is a perfect fit for mobile rigs, traditional venues, and houses of worship alike. And with over six decades making some of the most popular power amplifiers on Earth, you know you can trust Crown and your XLi 3500 no matter what.

    Crown XLi 3500 Power Amplifier at a Glance:

    • All the versatility you can ask for in a budget-friendly amplifier
    • Packed with the quality I/O your venue or mobile rig demands
    • Smart and rugged design protects against everyday hazards

    All the versatility you can ask for in a budget-friendly amplifierYou know the old adage about how if you ask two live sound engineers how to setup a system you’ll get three answers? Well, this Crown XLi 3500 power amplifier can handle them all. Wether you need an amp that can do stereo, parallel, or bridged-mono mode, XLi series amps will do the trick. Even if you’re constantly reconfiguring your system, you’ll get all the versatility you need from your XLi 3500.

    Packed with the quality I/O your venue or mobile rig demandsNo two rigs are the same, which is why Crown outfitted their XLi amplifiers (including the XLi 3500) with all of the popular connections serious live sound engineers demand. On the input side, the XLi 3500 offers both balanced XLR and unbalanced RCA jacks, accommodating professional mixers and DJ systems alike. Conversely, both low-tech binding posts and modern speakON connectors let you attach any variety of passive PA speakers.

    Smart and rugged design protects against everyday hazardsOne thing no engineer can afford is losing an amp right before (or in the middle of) a show. With a Crown XLi 3500 in your rig, you can worry about setting a good mix, not keeping your amp from exploding. Crown built their XLi series power amplifiers with safety in mind, protecting against shorts, empty loads, on/off thumps, and more. And while they were at it, they even gave the XLi 3500 a mighty effective shield against the kind of RF that can ruin any show, so you don’t have to cringe the next time the talent shows up with their special (read, outdated) wireless system.

    Crown XLi 3500 Power Amplifier Features:

    • An affordable and reliable power amplifier you can use in any PA system
    • 2,700-watts in bridged-mono mode, up to 1350-watts stereo/parallel operation
    • Includes both unbalanced RCA and balanced XLR input connectivity
    • Binding post and speakON output connectors let you use virtually any passive PA speakers
    • Selectable input voltage (.755V or 1.4V) lets you set up your rig to match your gear
    • LED power, fault, signal-presence, and clip indicators let you keep an eye on the safety of your amplifier
    • Forced-air cooling and protection against shorts, no-load, and on/off thumps ensure smooth operation and long life
    • Excellent shielding against radio-frequency interference keeps your sound clean, even in heavy wireless conditions

    Get the power amp you need for a price you can afford with a Crown XLi 3500!

    Tech Specs

    • Number of Channels:2
    • Power Class:Class AB
    • Watts/Side @ 8 ohms:1,000W
    • Watts/Side @ 4 ohms:1,350W
    • Watts Bridged:2,700W @ 8 ohms
    • Inputs:2 x RCA, 2 x XLR
    • Outputs:2 x speakON, 2 x Binding Post
    • Cooling System:Internal heat sinks with forced air plus fan-cooled, speed-regulated, thermal protection and flow-through ventilation from front
    • Rack Spaces:2U
    • Height:3.5″
    • Depth:14.4″
    • Width:19″
    • Weight:43 lbs.
    Quick View
  • 0 out of 5

    DBX 266XS Dual Compressor/Gate

    18,999.00

    Excellent Live Sound Compressor!

    Keep your live sound under control! When you add a dbx 266xs compressor/limiter/gate to your live sound rig, maintaining a polished and professional edge to your dynamics is incredibly easy. The 266xs’s transparent sound lends itself perfectly to guitars, drums, vocals, and virtually any other sound sources. Classic dbx auto mode makes smoothing out levels nearly 100% fool proof. Bright and easy-to-read LED indicators let you easily keep an eye on levels and gain reduction. The 266xs also features a program-adaptive expander/gate on either channel, allowing you to achieve maximum clarity.

    dbx 266xs 2-channel Compressor/Gate Features at a Glance:

    • Great sounding dynamics control for any program material
    • New gate timing algorithms ensure the smoothest release
    • Program-adaptive expander/gates
    • LEDs for gain reduction, compression and gate threshold
    • Stereo or dual-mono operation
    • Balanced inputs and outputs on 1/4″ TRS and XLR connectors
    • Side Chain insert
    • Classic dbx Auto mode for nearly error-proof operation

    No live sound rig is complete, without a dbx 266xs 2-channel compressor/limiter/gate or two!

    Tech Specs

    • Number of Channels:2
    • Controls:Threshold, Ratio (Gate), Threshold, Ratio, Attack, Release, Gain (Compressor)
    • Threshold:-40 dB to 20 dB (Compressor)
    • Ratio:1:1 to Inf.
    • Frequency Response:35Hz-95kHz
    • Inputs:2 x XLR, 2 x 1/4″
    • Outputs:2 x XLR, 2 x 1/4″
    • Sidechain I/O:2 x 1/4″
    • Rack Spaces:1U
    • Height:1.75″
    • Depth:5.75″
    • Width:19″
    • Weight:4.84 lbs.
    • Manufacturer Part Number:DBX266XSV

     

    Quick View
  • 0 out of 5

    Dynacord CMS2200-3 Analog Mixing Console

    244,999.00

    The WorkHorse !!

    The Dynacord CMS 2200-3 Compact 22-Channel Mixer features 18 mic/line and four mic/stereo-line channels. There are six auxiliary ports, two with pre, two with post, and two with pre/post switchable faders. Two effects processors offer 100 factory presets and a TAP key allows precise setting of delay times. Each preset can be edited and stored to 20 user memories.

    The built-in USB audio interface shares four playback and four recording channels simultaneously with a PC or Mac, following studio standard 24-bit, 96 kHz. An additional MIDI interface allows integration of instruments such as keyboards. The 11-band stereo graphic equalizer can be routed to master or monitor channels.

    • License for Steinberg’s Cubase software included
    • Large, contrast-rich OLED display
    • All faders are dust protected
    • For dark environments, an optional gooseneck light can be connected via a 4-pin XLR
    Quick View
  • 0 out of 5

    Electro-Voice Everse 8 Battery Powered Speaker

    61,999.00

    The First-ever Battery-powered PA from Electro-Voice!

    Good things take time — including speakers! That’s why Electro-Voice put years of thoughtful research into the Everse 8, their first-ever battery-powered PA. The Everse 8 offers a host of travel-friendly features, including 12-hour battery life, Bluetooth streaming, QuickSmart Mobile control, and more. All this is paired with top-tier components like a Dynacord high-efficiency Class-D amplifier and a DSP module, as well as an 8-inch woofer and a high-output titanium tweeter. The Everse 8 maximizes its great components with a suite of powerful mixing tools onboard; there’s a 4-channel digital mixer, studio-quality effects and processing, feedback suppression, and 48-volt phantom power for microphones. All that and more is housed in a rugged but elegant polypropylene shell that’s weatherized for water resistance to splashes and rain. This speaker is an amazing pick for musicians, DJs, event hosts, buskers, and more! You get a little bit of everything, all with exceptional sound quality, when you choose the Everse 8 from us!

    Flexible features at a great price

    The Everse 8 excels at practically every possible application we’ve thrown at it. The speaker itself can be setup multiple different ways. Mount it on a tripod for the ultimate long throw at sporting events or outdoor gatherings; turn it into a stage wedge monitor using the 55° angle; or turn it upright with a 30° kick-back angle that projects upward and out. And with up to 12 hours of battery life per charge, the Everse 8 is ready for events that last all day or all night.

    Microphone ready

    What’s more, the Everse 8 pairs extremely well with wireless and wired microphone systems. The speaker features 48-volt phantom power output and a 12-volt DC port for powering wireless mic systems straight from the Everse 8 battery. Additionally, the Everse 8 accessory tray (sold separately) easily mounts to the top of the speaker for neatly organizing receivers and other wireless gear.

    Mobile controls

    The Everse 8 offers straightforward Bluetooth streaming with additional control options via the QuickSmart Mobile app. The QuickSmart Mobile app gives users simplified, streamlined control of audio, effects, and mix functions via a mobile smart device. Essentially, you can control all of the speaker’s audio features from afar — a must-have feature for busy hosts and dedicated sound technicians alike! If you find yourself wanting even more power than what comes stock, Everse 8 speakers can also be used in true stereo via Bluetooth.

    Top-notch EV and Dynacord components

    Each component on the Everse 8 adheres to rigorous Electro-Verse standards of quality and performance. It’s the same exceptional look, feel, and sound we expect from EV microphones and speakers, but streamlined for portable and outdoor use. Regarding hardware, the Everse 8’s 8-inch woofer features patented Electro-Voice SST (Signal Synchronized Transducers) port design that yields big sound even from a compact speaker enclosure. Paired with that is a deluxe titanium tweeter mounted onto a custom constant-directivity waveguide for high, consistent output. What’s more, the Everse 8 borrows several coveted components from EV sister brand Dynacord, including a Class-D amplifier and a top-notch DSP sound module. Inside and out, this is one speaker that settles for nothing but the best.

    Electro-Voice Everse 8 8-inch 2-way Battery-Powered PA Speaker Features:

    • Battery-powered portable PA for indoor or outdoor use
    • Best-in-class audio via a Dynacord high-efficiency Class-D amplifier and Dynacord DSP module
    • Built-in 4-channel digital mixer with studio-quality DSP effects and processing, 48V phantom power, feedback suppression, and audio ducking
    • Custom-designed high-capacity li-ion battery pack with up to 12 hours of run time per charge
    • Effortless battery removal and swaps with a tool-free design
    • 8-inch woofer with patented SST (Signal Synchronized Transducers) port design
    • High-output titanium tweeter mounted onto a custom constant-directivity waveguide
    • Flexible function — use it with a tripod to boost range, as a stage wedge using the 55° monitor angle, or use upright with a 30° kick-back angle to project upward and out
    • Stream via Bluetooth in mono or stereo
    • EV QuickSmart Mobile app remote control of all audio, effects, and mix functions via phone or tablet
    • 12V DC port for powering wireless microphone systems (using system battery) plus a charging port for mobile devices
    • Weatherized polypropylene shell with an IP43 rating (water resistant to splashes and light rain)
    • No-skid rubber pads for a slip-free experience
    • Available with a wide variety of accessories (sold separately), including padded totes, accessory trays, rain covers, and extra batteries

    Tech Specs

    • Type:Portable PA Speaker
    • Speaker Drivers:1 x 8″ LF, 1 x 1″ Dome
    • Number of Mixer Channels:4
    • Number of Mic Preamps:2
    • Phantom Power:Yes
    • EQ:3-band Channel EQ
    • Effects:30 Effects, Reverb, Delay, Chorus
    • Inputs:2 x XLR-1/4″ combo, 1 x 1/8″
    • Outputs:1 x XLR (mix out), 1 x 12V 500mA Barrel (wireless receiver power)
    • USB:1 x USB-C 5V 1.5A (power out)
    • Bluetooth:v5.0
    • Other I/O:1 x 1/4″ (footswitch)
    • Total Power:Variable, 800W at Full Battery
    • Frequency Response:50Hz-20khz
    • Software:Electro-Voice QuickSmart Remote App
    • Features:Compression, Ducking, Feedback Suppression
    • Mounting Options:Pole, Floor, Monitor
    • Battery-powered:Yes (12 hours @ 95dB, 6 hours @ 121dB, 3 hours @ 121db with wireless receiver attached)
    • Power Source:Lithium-ion Battery (rechargeable using standard IEC AC cable)
    • Height:10.7″
    • Width:15.7″
    • Depth:10.8″
    • Weight:16.8 lbs.
    Quick View
  • 0 out of 5

    Electro-Voice Evolve 50M

    175,000.00

    Low-Profile PA with Standout Sound

    The Electro-Voice EVOLVE 50M is a versatile, ultra-compact PA system that’s perfect for small- and medium-sized venues. Packing 1,000 watts of power, the EVOLVE 50M can be used on its own by solo artists or daisy-chained with other units for larger venues with ensembles. This PA system consists of three major parts: a potent 12-inch woofer, a lightweight aluminum sub pole, and a column array with eight 3.5-inch neodymium drivers. The EVOLVE 50M has a proprietary waveguide design that provides 120° of horizontal coverage and 40° of vertical coverage to ensure that the back of the house will always hear your mix. It has an onboard 8-channel digital mixer that can handle microphones, guitars, instruments, and many more. Featuring wireless control via the QuickSmart mobile app and seamless Bluetooth streaming, the EVOLVE 50M has enough functionality for any performer.

    Ultra-portable, collapsible design saves you time and effort

    Lugging a heavy PA into the venue is a lot of work. The Electro-Voice EVOLVE 50M seeks to change that, tipping the scale at just 57.75 pounds. To make transportation easy, the EVOLVE 50M ships to your door with an included backpack for the column array and the aluminum speaker pole. Setup is simple: the two-section aluminum pole mounts into the subwoofer and transmits audio to the column array via internal integrated speaker wires. The intuitive design helps you get set up for your gig in no time at all. Just plug it all in and play!

    The fully configurable digital mixer is ready for anything

    The EVOLVE 50M has a fully configurable 8-channel digital mixer that you can control from your smartphone via the QuickSmart mobile app. You get four presets to cover some of the situations you may encounter. It includes a 3-band EQ, an onboard compressor, dual FX sends, and independent channel gain controls. In the app, you can add any one of the 30 professional-quality effects to your mix, including reverb, delay, chorus, flanger, and echo! Here, we especially appreciate the built-in Bluetooth streaming capability that allows you to keep the vibe going even if you need to step away from the stage.

    Neodymium drivers deliver top-notch sound and expansive coverage

    The EVOLVE 50M is a sonic powerhouse. The column array is loaded with eight 3.5-inch neodymium high-frequency drivers and a proprietary waveguide that provides an impressive 120° of horizontal coverage and 40° of vertical coverage. The excellent sound quality and dispersion of the column array is paired with the raw power of the ported 12-inch subwoofer to produce up to 127dB SPL with a frequency response as low as 43Hz. No matter where you’re playing, you can rest assured that every inch of the venue receives the best sound possible.

    Electro-Voice EVOLVE 50M Features:

    • 1,000W system packs a big punch
    • Collapsible design allows for compact storage and easy transport
    • Composite waveguides provide spacious coverage for the entire venue
    • 8 column-arrayed HF drivers and 12-inch LF driver deliver impressive power
    • 4 factory presets (Music, Live, Speech, and Club) help you set up for common situations
    • 3-band EQ makes sound shaping simple and easy
    • Built-in Bluetooth connectivity allows you stream music seamlessly for intermission or backing tracks
    • QuickSmart mobile app provides powerful DSP and a variety of professional effects
    • Phantom power enables use with condenser microphones

    Tech Specs

    • Type:Portable PA System
    • Speaker Drivers:1 x 12″ LF, 8 x 3.5″ HF
    • Number of Mixer Channels:8
    • EQ:3-band system EQ, 7-band graphic EQ
    • Effects:Reverb, Chorus, Echo
    • Inputs:4 x XLR/1/4″ combo, 2 x XLR/1/4″ combo (L/R), 1 x Dual RCA Stereo (line), 1 x 1/8″ (aux), 1 x 1/4″ (HI-Z)
    • Outputs:2 x XLR
    • Bluetooth:Yes
    • Other I/O:1 x 1/4″ (footswitch), 1 x RJ45
    • Total Power:1000W
    • Frequency Response:43Hz-20khz (±3 db)
    • Enclosure Material:15mm. Plywood, Aluminum Pole
    • Mounting Options:Floor
    • Power Source:Standard IEC AC power cord
    • Height:20.9″ (sub), 32.5″ (array)
    • Width:13.6″ (sub), 4″ (array)
    • Depth:18.5″ (sub), 6.9″ (array)
    • Weight:57.75 lbs. (total)
    Quick View
  • 0 out of 5

    Electrovoice Everse 12 Battery Powered Speaker

    90,000.00

    A Better Battery-powered PA

    Building on the success of the original Everse 8, the Everse 12 offers better sound, more output, and greater coverage. Electro-Voice loaded this battery-powered PA speaker with a 12-inch woofer to handle the lows and a 1-inch compression driver for the highs. The drivers, together with the patented SST (Signal Synchronized Transducers) port design, supply a crisp, clear tone regardless of how hard you push the master volume. Plus, the lightweight design makes the Everse 12 extremely easy to carry into venues, park pavilions, and more. You can even use the Everse 12 to power your wireless system and charge your phone simultaneously. Other excellent features include onboard effects and Dynacord DSP. With the Everse 12 in tow, you’ll ace your next gig.

    Lightweight and easy to transport

    A/V professionals are quick to champion the Everse 12’s lightweight design. Coming in at just a shade over 31 pounds, this speaker’s easy to load in and out of a gig. There’s also an ergonomically designed soft-touch handle that’s gentle on your hand during load-in and lout-out. Don’t let the weight fool you, though. This speaker’s 400 watts of power really delivers the boom.

    Flexible and functional

    Electro-Voice designed the Everse 12 to be more than a simple PA speaker. It offers expandable functionality to better serve you onstage. First, the speaker includes a 12-volt DC port to power a wireless mic system. Simply secure your wireless receiver to the Everse 12 Accessory Tray (sold separately) and attach it to the top of the speaker to keep your performance gear in one place. Next, there’s a charging port for mobile devices. Finally, the multi-angle cabinet design allows you to pole-mount the speaker, kick it back for better projection, or use it upright. What about backing music? Bluetooth connectivity makes it easy.

    Onboard Dynacord DSP

    The Everse 12 speaker retains built-in digital signal processing (DSP) powered by Dynacord. The onboard DSP module supercharges the 4-channel digital mixer with studio-quality processing and effects, plus a host of performance tools to improve your quality of life onstage. You get a 7-band EQ, user-programmable presets, and input level control with metering. Each digital effect is controllable via the free QuickSmart Mobile app, putting a universe of control in the palm of your hand.

    Electro-Voice Everse 12 12-inch Battery-powered PA Speaker Features:

    • 400W battery-powered portable PA system
    • 12-inch woofer and 1-inch compression driver produce clear, crisp sound
    • Lightweight, ergonomic design makes transporting the Everse 12 effortless
    • QuickSmart DSP lets you apply EQ curves, adjust levels, and trigger digital effects
    • Includes 12-volt DC port for powering wireless mic systems
    • EV QuickSmart Mobile app offers quick setup, control, and monitoring of up to six Everse 12 systems
    • Bluetooth capability streams audio wirelessly from any smart device
    • Multi-position enclosure lets you mount the PA however you want
    • Steel grille protects your speakers

    Tech Specs

    • Type:Battery-powered PA Speaker
    • Speaker Drivers:1 x 12″ woofer, 1 x 1″ compression driver
    • Inputs:2 x XLR/TRS combo, 1 x 3.5mm stereo, 1 x TRS Footswitch
    • Outputs:1 x XLR
    • Bluetooth:Yes
    • Total Power:400W Peak
    • Frequency Response:55Hz-20khz (±3 db)
    • Maximum Peak SPL:126dB SPL
    • Horizontal Coverage Angle:100°
    • Vertical Coverage Angle:60°
    • Enclosure Material:Polypropylene
    • Mounting Options:Pole, Floor
    • Battery-powered:Yes, 12 hour run time
    • Power Source:12V DC Power Output
    • Height:23.5″
    • Width:13.58″
    • Depth:13.66″
    • Weight:31.22 lbs.

     

    Quick View
  • 0 out of 5

    Electrovoice ZLX12P-G2 Powered Speakers

    44,999.00

    The Sound You Love Just Got Better

    Electro-Voice has been hard at work refining the sound and functionality of ZLX speakers since the originals hit the market. Now, with the introduction of ZLX G2, we can report that Electro-Voice has truly outdone itself. Available in 15-, 12-, and 8-inch sizes, the improved ZLX speaker offers better audio fidelity than ever, thanks to the patented Signal Synchronized Transducers. What’s more, the powered versions boast an updated 4-channel mixer, 30 new effects presets, a brand-new DSP engine, Bluetooth control, and phantom power. Finally, the ZLX G2 comes with the exact same grille as the previous generation, so you can add more speakers to your setup without sacrificing visual continuity. It all adds up to a speaker with every feature optimized for performers who need to get the most out of their sound.

    Built-in digital mixer

    Every ZLX G2 powered speaker comes with an onboard 4-channel digital mixer. The mixer features two combination XLR/TRS inputs and a dedicated hi-Z input to cover any application, from small groups to large ensembles running through an external mixer. After setting levels, you can add stunning DynaCord DSP and effects to the signal. You get a 7-band EQ, compression, ducking, reverb, chorus, and delay to shape your sound to perfection. Everything is accessible via the intuitive 1-knob user interface or the Electro-Voice QuickSmart Mobile app on your smart device.

    Complete wireless control

    Download the Electro-Voice QuickSmart Mobile app on your smartphone or tablet, and you can access a whole world of simple control. The app lets you monitor the status of your performance and control a speaker’s functionality — a must-have for production crews of all kinds. Plus, the app grants easy access to the 7-band EQ, effects, and more. Music makers who need more from their PA speakers will absolutely love how effectively the QuickSmart Mobile app manages and controls performances.

    Flexible enough for any application

    ZLX G2 speakers are extremely capable pieces of kit. They’re right at home sitting on a tripod or sub pole and functioning as front of house mains. You can also use any of the ZLX G2 speakers as an ultra-clear, full-range, flat-response floor monitor. Finally, the 15- and 12-inch iterations come with an additional kickback function, which helps angle sound upward for street performers or coffee shop gigs. Each position comes with a dedicated EQ setting to guarantee amazing performance in any application.

    Electro-Voice ZLX-12P-G2 12-inch Powered Speaker Features:

    • 1,000-watt powered speaker with the versatility to handle any application
    • 12-inch woofer pumps out robust low end
    • 1.4-inch compression driver delivers shining trebles
    • Patented Signal Synchronized Transducers increase fidelity and improve acoustic dispersion
    • 4-channel digital mixer and onboard effects help you refine your sound
    • Built-in DSP polishes your sound to perfection
    • QuickSmart Mobile app monitors and controls speaker performance
    • True Wireless Stereo function lets you stream stereo music via Bluetooth (additional speakers sold separately)
    • 3 positioning options make the speaker even more versatile

    Tech Specs

    • Powered:Yes
    • LF Driver Size:12″ woofer
    • HF Driver Size:1.4″ Titanium compression driver
    • Total Power:1000W Peak
    • Inputs:2 x XLR-TSR combo, 1 x 1/4″ TS
    • Outputs:1 x XLR
    • Frequency Range:48Hz-20khz (-10 dB)
    • Maximum Peak SPL:127 dB SPL @ 1m
    • Horizontal Coverage Angle:90°
    • Vertical Coverage Angle:60°
    • Mounting Options:Pole, Floor
    • Height:24.45″
    • Width:14.02″
    • Depth:14.01″
    • Weight:42.67″
    Quick View
X