Showing 61–72 of 91 results
-
Yamaha DHR15 Powered Speaker
Read moreHigh-impact Sound in a Compact Powered Speaker
Fueled by 1,000 watts of Class D power, the Yamaha DHR15 packs a high-impact sound that belies its compact size. This outstanding powered PA speaker features a high-compliance, low-frequency 15-inch driver and a 1.4-inch high-frequency compression driver, which exhibit a full-range 44Hz–20kHz frequency response and an impressive 131dB maximum SPL. Your entire audience will experience consistent sound, thanks to the DHR15’s 90-degree by 60-degree coverage angle, while 48-bit DSP and Yamaha’s acclaimed D-Contour intelligent multiband compressor assure minimal crossover distortion and predictable sonic performance at any volume. This active loudspeaker also includes flexible FOH/Main and Monitor operational modes. The DHR15 boasts a rugged polyurea-coated compact plywood enclosure and a 35mm socket for effortless placement on a stand or pole.
Clear voice reproduction and extreme musicality
Despite its compact, portable form factor, the DHR15 packs quite a wallop. This active loudspeaker pumps 1,000 watts of Class D power through a high-compliance 15-inch low-frequency driver and a 1.4-inch high-frequency compression driver. No matter your application, the DHR15 will exceed all expectations with a full-range 44Hz–20kHz frequency response and a rafter-shaking 131dB of maximum SPL. What’s more, its 90-degree by 60-degree coverage angle ensures that every seat experiences consistent — and amazing — sound.
Full and detailed imaging from advanced FIR-X tuning
Many loudspeakers exhibit a loss of clarity and/or volume in frequencies near their crossover points, but the Yamaha DHR15 maintains clear sound thanks to advanced FIR-X crossover tuning. Utilizing ultra-precise 48-bit DSP, FIR-X optimizes frequencies and phase relationships to practically eliminate crossover distortion. The result is a smooth, balanced response around the crossover frequencies and a better-sounding performance overall.
Consistent clarity and balance at any volume
While any loudspeaker’s tonal balance can vary depending on its output level, the DHR15 features Yamaha’s D-Contour intelligent multiband compressor to maintain its sonic integrity at any volume. D-Contour constantly monitors multiple frequency bands and makes real-time adjustments to keep the balance consistent — it won’t mess with your mix; it just ensures your mix stays the same at any volume level. And live sound engineers appreciate the flexibility to choose from two operational modes (FOH/Main or Monitor) to optimize the frequency balance depending on your application.
Yamaha DHR15 Powered Speaker Features:
- Compact loudspeaker fueled by 1000W of Class D power
- High-compliance 15-inch low-frequency driver; 1.4-inch high-frequency compression driver
- Full-range 44Hz–20kHz frequency response
- Rafter-shaking 131dB maximum SPL
- 90° x 60° coverage angle ensures consistent, amazing sound throughout the room
- 48-bit DSP optimizes frequencies and phase relationships to mitigate crossover distortion
- D-Contour intelligent multiband compressor maintains sonic integrity at any volume
- Flexible FOH/Main and Monitor operational modes
- Rugged polyurea-coated compact plywood enclosure
- 35mm socket for effortless placement on a stand or pole
Tech Specs
- Powered:Yes
- Power Configuration:Bi-amped
- LF Driver Size:15″ woofer
- HF Driver Size:1″ High-frequency compression driver
- LF Driver Power Amp:800W
- HF Driver Power Amp:200W
- Total Power:1000W Class D
- Inputs:1 x XLR-1/4″ combo, Dual RCA stereo
- Outputs:1 x XLR
- Frequency Range:44Hz-20khz (-10 dB)
- Maximum Peak SPL:131 dB SPL @ 1m
- Horizontal Coverage Angle:90°
- Vertical Coverage Angle:60°
- Signal Processing:48-bit DSP
- Enclosure Material:Plywood with Polyurea coating
- Mounting Options:Pole
- Power Source:Standard IEC AC cable
- Height:27.25″
- Width:17″
- Depth:16″
- Weight:52.8 lbs.
- Manufacturer Part Number:DHR15
-
Behringer DR112DSP Powered Speakers
₹36,999.00Add to cart12″ Powered PA Speaker with 2-channel Mixer and Onboard DSP
The Behringer DR112DSP is a cost-effective powered PA speaker that packs big sound and impressive features. The DR112DSP issues 1,200 room-filling watts from its 12″ woofer and 1.35″ compression driver. A virtually full-range frequency response (50Hz–19kHz) and wide dispersion pattern (90°H x 60°V) equip this speaker for critical FOH and public address applications. Not only that, but a versatile housing design allows the DR112DSP to be flown from trussing for permanent installations, mounted to a 35mm subwoofer pole for throw-and-go concert reinforcement, or even used as a wedge monitor for live performance feedback. A built-in 2-channel mixer with XLR-1/4″ combo inputs let you use the DR112DSP even without a mixer — just plug in a mic or instrument, stream backing tracks wirelessly via Bluetooth, and you’re all set to play out. Not only is the DR112DSP powerful and portable, but it’s smart too, giving you four sound profiles (Music, Live, Speech, and DJ/Club) and a built-in crossover for seamless integration with your room and gear. Dollar for dollar, if you’re looking for output, portability, and ease of use at a great price, it’s hard to beat the Behringer DR112DSP from us
Behringer DR112DSP 12″ Powered PA Speaker Features:
- Packs big sound and impressive features
- Works great as a main speaker or monitor wedge
- 1,200 room-filling watts of output
- 12″ woofer and 1.35″ compression driver
- Full frequency response (50Hz–19kHz)
- Wide sound dispersion (90°H x 60°V)
- 35mm pole socket
- 2-channel mixer with XLR-1/4″ combo inputs
- Bluetooth audio streaming
- 1/8″ aux in for mobile devices
- 4 sound profiles: Music, Live, Speech, and DJ/Club
- Built-in crossover for subwoofer integration
Tech Specs
- Powered:Yes
- Power Configuration:Bi-amped
- Channels:2-channel mixer
- LF Driver Size:12″ woofer
- HF Driver Size:1.35″ compression driver
- Total Power:1200W Class D
- Inputs:2 x XLR-1/4″ combo, 1 x 1/8″
- Outputs:1 x XLR
- Bluetooth:Yes, v4.2
- Wireless:Bluetooth
- Frequency Response:50Hz-19kHz
- Maximum Peak SPL:134 dB SPL @ 1m
- Horizontal Coverage Angle:90 Degrees
- Vertical Coverage Angle:60 Degrees
- Enclosure Material:Molded Plastic
- Mounting Options:Pole, Floor Wedge
- Power Source:Standard IEC AC cable
- Height:23.7″
- Width:14.1″
- Depth:14.1″
- Weight:37.9 lbs.
-
Behringer DR115DSP Powered Speakers
₹35,999.00Add to cart15″ Powered PA Speaker with 2-channel Mixer and Onboard DSP
The Behringer DR115DSP is a cost-effective powered PA speaker that packs big sound and impressive features. The DR115DSP issues 1,400 room-filling watts from its 15″ woofer and 1.75″ compression driver. A virtually full-range frequency response (45Hz–19kHz) and wide dispersion pattern (90°H x 60°V) equip this speaker for critical FOH and public address applications. Not only that, but a versatile housing design allows the DR115DSP to be flown from trussing for permanent installations, mounted to a 35mm subwoofer pole for throw-and-go concert reinforcement, or even used as a wedge monitor for live performance feedback. A built-in 2-channel mixer with XLR-1/4″ combo inputs let you use the DR115DSP even without a mixer — just plug in a mic or instrument, stream backing tracks wirelessly via Bluetooth, and you’re all set to play out. Not only is the DR115DSP powerful and portable, but it’s smart, too, giving you four sound profiles (Music, Live, Speech, and DJ/Club) and a built-in crossover for seamless integration with your room and gear. Dollar for dollar, if you’re looking for output, portability, and ease of use at a great price, it’s hard to beat the Behringer DR115DSP.
Behringer DR115DSP 15″ Powered PA Speaker Features:
- Packs big sound and impressive features
- Works great as a main speaker or monitor wedge
- 1,400 room-filling watts of output
- 15″ woofer and 1.35″ compression driver
- Full frequency response (45Hz–19kHz)
- Wide sound dispersion (90°H x 60°V)
- 35mm pole socket
- 2-channel mixer with XLR-1/4″ combo inputs
- Bluetooth audio streaming
- 1/8″ aux in for mobile devices
- 4 sound profiles: Music, Live, Speech, and DJ/Club
- Built-in crossover for subwoofer integration
Tech Specs
- Powered:Yes
- Power Configuration:Bi-amped
- Channels:2-channel mixer
- LF Driver Size:15″ woofer
- HF Driver Size:1.75″ compression driver
- Total Power:1400W Class D
- Inputs:2 x XLR-1/4″ combo, 1 x 1/8″ (aux)
- Outputs:1 x XLR
- Bluetooth:Yes, v4.2
- Wireless:Bluetooth
- Frequency Response:45Hz-19kHz
- Horizontal Coverage Angle:90 Degrees
- Vertical Coverage Angle:60 Degrees
- Signal Processing:DSP
- Enclosure Material:Molded Plastic
- Mounting Options:Pole, Floor Wedge
- Power Source:Standard IEC AC cable
- Height:27″
- Width:16.6″
- Depth:15.3″
- Weight:47.6 lbs.
-
Behringer Eurolive B208D Powered Speakers
₹23,999.00Add to cartBig Sound in a Lightweight Speaker
The Behringer Eurolive B208D powered PA speaker puts out big sound at a small price. Featuring an impressive power-to-weight ratio and built-in sound processing, the B208Ds pack a punch yet are easy to transport. And thanks to the cabinet design, the B208D can be laid on its side for use as a stage monitor. It even makes a great single-speaker PA for public address or background music – just connect a microphone or music player and you’re ready to go. And with technology built-in to prevent overloads, you’ll always get a consistent sound from the Behringer Eurolive B208D speakers.
Behringer Eurolive B208D Powered PA Speaker at a Glance:
- High power, low weight
- Built-in DSP
- Flexible applications
High Power, Low Weight:The B208D packs dual power amps for the 8″ LF and 1.35″ HF drivers for a total of 200 watts of peak power in a 15 pound package. The Eurolive series features Class D amps for maximum efficiency and low operating temperatures, so you can use them all day long without worrying about overheating.
Built-in DSP:Behringer’s Eurolive series of loudspeakers feature built-in signal processing to optimize your sound quality. The B208D has an intelligent crossover, EQ, and limiter design to make sure your speakers never overload. As you raise the volume, the crossover and EQ slightly lower bass frequencies to prevent muddiness and distortion. The limiter prevents your input signal from clipping, so you’ll always hear clean audio.
Flexible Applications:You can connect a variety of signals to the B208D, making it a very flexible speaker. Use a pair of them for your main sound system or lay them on their side and use them as stage monitors. Or, just connect a single microphone for public address. The B208Ds are even pole-mountable, so you can position them any way you need to.
Behringer Eurolive B208D Powered PA Speaker Features:
- Huge power-to-weight ratio for a powerful yet easily transportable PA
- Built-in signal processing optimizes audio quality
- Class D amps for efficiency and reliability
- Angled design allows it to be used as a stage monitor
- Custom drivers designed and built by Behringer
For a powerful yet lightweight PA, check out the Behringer Eurolive 208D!
Tech Specs
- Powered:Yes
- Power Configuration:Bi-amped
- LF Driver Size:1 x 8″
- HF Driver Size:1.35″
- LF Driver Power Amp:135W Continuous
- HF Driver Power Amp:38W Continuous
- Total Power:200W Peak
- Inputs:1 x 1/4″, 1 x XLR
- Outputs:1 x XLR
- Frequency Range:65Hz-20kHz
- Crossover Frequency:2.4kHz
- Maximum Peak SPL:113dB
- Enclosure Material:Molded Plastic
- Mounting Options:Pole Mount with 1.37″ socket, Floor Wedge
- Power Source:Standard IEC AC cable
- Height:14.7″
- Width:8″
- Depth:9.8″
- Weight:14.7 lbs.
-
Turbosound iQ15 Powered Speakers
Detailed Product InformationThe 2,500-Watt iQ15 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 15″ low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1″ compression driver with copper-clad aluminium voice coil for extended high frequency reproduction.
Equipped with a very efficient and lightweight two channel KLARK TEKNIK Class-D power amplifier, the iQ15 provides an impressive 2,500 Watts of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels – and long-term reliability. iQ15’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected loudspeakers.
KLARK TEKNIK also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to easily optimise the iQ15’s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors.
On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ15 features a mic/line switch and level control with signal present LED on each channel.
The iQ15 also features our proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analogue methods, but also significantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ15 via PC computer, as well as DSP and speaker modelling firmware updates.
The lightweight fibre glass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille and multiple internal rigging points for permanent installations. The iQ15 is also fitted with a dual angle pole mount socket, allowing the enclosure to be pole mounted straight on, or raised and angled downwards for optimal audience coverage. Mains power input and link output is provided via Neutrik powerCON* connectors.
-
Turbosound iQ8 Powered Speakers
Detailed Product InformationThe 2,500-Watt iQ8 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 8″ low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1″ compression driver with copper clad aluminium voice coil for extended high frequency reproduction.
Equipped with a very efficient and lightweight two channel KLARK TEKNIK Class-D power amplifier, the iQ8 provides an impressive 2,500 Watts of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels – and long-term reliability. iQ8’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected loudspeakers.
KLARK TEKNIK also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to easily optimise the iQ8’s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors.
On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ8 features a mic/line switch and level control with signal present LED on each channel.
The iQ8 also features our proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analogue methods, but also significantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ8 via PC computer, as well as DSP and speaker modelling firmware updates.
The lightweight fibre glass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille and multiple internal rigging points for permanent installations. The iQ8 is also fitted with a dual angle pole mount socket, allowing the enclosure to be pole mounted straight on, or raised and angled downwards for optimal audience coverage. Mains power input and link output is provided via Neutrik powerCON* connectors.
-
Turbosound iX12 Powered Speakers
Detailed Product InformationThe 1000-Watt iX12 is a powered two-way 12″ loudspeaker with Bluetooth* audio streaming ideally suited for a wide range of portable and fixed music and speech sound reinforcement applications. A state-of-the-art KLARK TEKNIK DSP controls the built-in 3-channel digital mixer via a single-knob user interface, as well as providing comprehensive wireless remote control via dedicated app for iPhone/iPad. The iX12’s powerful 12″ low frequency driver and 1″ titanium dome compression driver ensure highest-quality low end, extended high frequency reproduction and articulate midrange reproduction.
The iX12 is fitted with a dual angle pole mount socket, allowing it to be pole mounted straight on, or raised higher and angled downwards to optimise audience coverage. The lightweight fibre glass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille.
-
Turbosound iX15 Powered Speakers
Detailed Product InformationThe 1000-Watt iX15 is a powered two-way 15″ loudspeaker with Bluetooth* audio streaming ideally suited for a wide range of portable and fixed music and speech sound reinforcement applications. A state-of-the-art KLARK TEKNIK DSP controls the built-in 3-channel digital mixer via a single-knob user interface, as well as providing comprehensive wireless remote control via dedicated app for iPhone/iPad. The iX15’s powerful 15″ low frequency driver and 1″ titanium dome compression driver ensure highest-quality low end, extended high frequency reproduction and articulate midrange reproduction.
The iX15 is fitted with a dual angle pole mount socket, allowing it to be pole mounted straight on, or raised higher and angled downwards to optimise audience coverage. The lightweight fibre glass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille.
-
Turbosound Milan M10 Powered Speakers
Detailed Product InformationThe 600-Watt full range MILAN M10 is a portable 10″ two-way powered loudspeaker featuring: two independent input channels with Mic and Line Inputs, selectable via a Mic/Line switch; a two-band master EQ (Bass, Treble); intelligent Limiting; and a Mix Out function for connecting additional powered loudspeakers for easy system expansion.
Designed for both portable and permanent install applications, the M10’s discrete inputs are each equipped with balanced, combination ¼ ” jack/ XLR connectors and a Level control, making them ideally suited for a wide range of music sources, from low-impedance microphones, acoustic guitars and keyboards – to mp3 players and mixing consoles.
-
Yamaha DZR315 Powered Speakers
Read moreThe Yamaha DZR315 is a 3-way powered speaker with Class-D bi-amplification. The DZR315 is ideal for DJs, and performers who appreciate tight bass, clear vocals and crisp highs. Even at high sound levels, the Yamaha DZR315 produces distortion-free audio.
Yamaha’s 96kHz DSP processor focuses the speaker’s power into high-res sound. Advanced FIR-X tuning technology delivers a smooth frequency response. The result is stunning clarity from the DZR315 speaker without phase distortion.
An onboard LCD screen lets you easily navigate the DSP functions. Store up to eight presets to save your custom adjustments. Saved settings can easily transferred to a USB flash drive.
The DZR315 powered speaker features D-CONTOUR, which is an intelligent multi-band compressor. It ensures your DZR315’s sound stays consistent and clear at any volume. The D-CONTOUR technology constantly monitors the output of multiple frequency bands. Then it applies the ideal EQ adjustments for band. There are two D-CONTOUR modes: FOH/MAIN and MONITOR. These settings give you more detailed tuning of your sound, depending on your system’s setup.
DSP protection built into the Yamaha DZR315 extends the life of its components. It also maximizes output. Yamaha’s DSP monitors the status of the power supply, power amplifiers, transducers and signal levels. This allows the DSP to protect each component of the DZR315 and maximize performance.
The DZR315 3-way speaker uses a redesigned Class-D power module. With 2,000W peak output, it delivers best-in-class power. It provides up to 143dB SPL and is optimized to match all three drivers. The DZR315 is fitted with a 15” woofer, 8” mid-range driver and a 1” tweeter.
A durable Polyurea coating protects the finish of the DZR315’s rugged plywood enclosure. It also features butterfly joints for extra strength. Yamaha didn’t cut any corners designing this cabinet. It’s built for professional use and life on the road.
Features
- 3-way, full-range powered speaker
- Rugged wooden cabinet
- 15″ woofer, 8″ mid-range driver and 1″ tweeter
- Onboard DSP and D-CONTOUR technology
- Bi-amplified with 2,000W Class-D power
Specifications
Speaker Configuration
- Active/passive: Active
- Type: 3-way
- LF driver: 15″
- MF driver: 8″
- HF driver: 1″
Power
- Amplifier class: D
- Wattage: 1,300W/2,000W
- Mixer/preamp: Yes
Audio
- Frequency response: 31Hz – 20kHz
- Coverage pattern: 75° x 50°
- Max SPL: 143dB
Inputs
- XLR: 2
- TRS: Not applicable
- TS: Not applicable
- RCA: Not applicable
- SPEAKON: Not applicable
Outputs
- XLR: 2
- TRS: Not applicable
- TS: Not applicable
- RCA: Not applicable
- SPEAKON: Not applicable
Enclosure
- Cabinet material: Plywood
- Width: 21.6″
- Height: 35.3″
- Depth: 20.5″
- Weight: 91.7 lb.
-
Yamaha DZR15 Powered Speakers
Read morePower, Performance, and Easy System Integration
The Yamaha DZR15 offers superb clarity and best-in-class SPL performance. This 2-way bi-amped PA speaker boasts a high-power 2,000-watt Class D amplifier, a 34Hz–20kHz frequency range, and can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while optimized presets and an intuitive LCD display make dialing in your settings a piece of cake. As a powered PA speaker, the DZR15 integrates with any configuration. It can also operate effectively as a stage monitor. The DZR15 employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating.
Sophisticated DSP processing
Here, we’re impressed by the DZR15’s intelligent DSP processing. Yamaha’s Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion, ensuring smooth frequency response, stunning clarity, and accurate sound imaging. D-Contour is an intelligent multiband compressor that maintains the ultimate in clarity, even when you push the DZR15 to its highest output level. D-Contour features two settings, FOH/MAIN and MONITOR mode, allowing you to fine-tune the DZR15’s sound based on your application. You also get DSP protection that safeguards your power supply, power amplifiers, and transducers against damage. Despite all this powerful DSP, the DZR15 remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.
Custom-designed transducers
The Yamaha DZR15 is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a heat-resistant aluminum-cast frame. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful, yet lightweight, neodymium magnet to handle the chest-thumping low end that the DZR15 delivers. The DZR15 isn’t just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction — even at cranked volumes.
Smart, ultra-flexible design
The DZR15 integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90×50° dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the DZR15’s constant directivity horn — its innovative design minimizes the roll-off that conventional horns often produce.
High-power Class D amplifier
Loaded with 2,000 watts of Class D power, the Yamaha DZR15 is a beast. It delivers an impressive 139dB SPL, so go ahead and crank it up — the DZR15 can take it. Enjoy maximum power, along with stable, worry-free operation, thanks to a universal switching mode power supply. Beyond that, this amp was optimized to match the DZR15’s transducers, ensuring top-tier sound quality.
Yamaha DZR15 Features:
- 2-way powered loudspeaker with 2″ HF and 15″ LF drivers
- Boasts a high-power 2,000-watt Class D amplifier and 34Hz–20kHz frequency range
- Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion
- D-Contour is an intelligent multiband compressor that maintains clarity at high output levels
- FOH/MAIN and MONITOR modes allow you to fine-tune your sound based on your application
- DSP protection safeguards your power supply, power amplifiers, and transducers against damage
- Optimized factory presets and intuitive LCD screen make operation easy
- Great-sounding, custom-designed transducers
- Rotatable horn allows vertical or horizontal mounting
- 90×50° dispersion from a vertical position
- Constant directivity horn supplies smooth, level coverage without roll-off
- Universal switching mode power supply offers maximum power, along with stable, worry-free operation
- Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating
Tech Specs
- Powered:Yes
- Power Configuration:Bi-amped Class D
- Channels:2
- LF Driver Size:15″ Cone, 3″ Voice Coil with Neodymium Magnet
- HF Driver Size:2″ HF Compression Driver, 1″ Throat
- LF Driver Power Amp:850W Continuous
- HF Driver Power Amp:100W Continuous
- Total Power:2000W Dynamic Peak
- Inputs:2 x XLR-1/4″ combo (line in)
- Outputs:2 x XLR (thru/output)
- USB:1 x Type A
- Frequency Range:34Hz-20khz (-10 dB)
- Crossover Frequency:1.7kHz
- Maximum Peak SPL:139 dB SPL @ 1m
- Horizontal Coverage Angle:90 Degrees
- Vertical Coverage Angle:50 Degrees
- Signal Processing:PEQ, Delay, Routing, 8 User Presets
- Enclosure Material:Plywood Cabinet with Polyurea Coating
- Mounting Options:Pole: 2 x 1.37″ (35mm) socket; Fly: 12 x M10; Floor Wedge
- Power Source:Standard IEC AC cable
- Height:30″
- Width:17.7″
- Depth:18.1″
- Weight:55.6 lbs.
- Manufacturer Part Number:DZR15
-
Yamaha DZR12 Powered Speakers
Read morePower, Performance, and Easy System Integration
The Yamaha DZR12 offers superb clarity and best-in-class SPL performance. This 2-way bi-amped PA speaker boasts a high-power 2,000-watt Class D amplifier, a 39Hz–20kHz frequency range, and can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while optimized presets and an intuitive LCD display make dialing in your settings a piece of cake. As a powered PA speaker, the DZR12 integrates with any configuration. It can also operate effectively as a stage monitor. The DZR12 employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating.
Sophisticated DSP processing
Here, we’re impressed by the DZR12’s intelligent DSP processing. Yamaha’s Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion, ensuring smooth frequency response, stunning clarity, and accurate sound imaging. D-Contour is an intelligent multiband compressor that maintains the ultimate in clarity, even when you push the DZR12 to its highest output level. D-Contour features two settings, FOH/MAIN and MONITOR mode, allowing you to fine-tune the DZR12’s sound based on your application. You also get DSP protection that safeguards your power supply, power amplifiers, and transducers against damage. Despite all this powerful DSP, the DZR12 remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.
Custom-designed transducers
The Yamaha DZR12 is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a heat-resistant aluminum-cast frame. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful, yet lightweight, neodymium magnet to handle the chest-thumping low end that the DZR12 delivers. The DZR12 isn’t just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction — even at cranked volumes.
Smart, ultra-flexible design
The DZR12 integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90×60° dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the DZR12’s constant directivity horn — its innovative design minimizes the roll-off that conventional horns often produce.
High-power Class D amplifier
Loaded with 2,000 watts of Class D power, the Yamaha DZR12 is a beast. It delivers an impressive 139dB SPL, so go ahead and crank it up — the DZR12 can take it. Enjoy maximum power, along with stable, worry-free operation, thanks to a universal switching mode power supply. Beyond that, this amp was optimized to match the DZR12’s transducers, ensuring top-tier sound quality.
Yamaha DZR12 Features:
- 2-way powered loudspeaker with 2″ HF and 12″ LF drivers
- Boasts a high-power 2,000-watt Class D amplifier and 39Hz–20kHz frequency range
- Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion
- D-Contour is an intelligent multiband compressor that maintains clarity at high output levels
- FOH/MAIN and MONITOR modes allow you to fine-tune your sound based on your application
- DSP protection safeguards your power supply, power amplifiers, and transducers against damage
- Optimized factory presets and intuitive LCD screen make operation easy
- Great-sounding, custom-designed transducers
- Rotatable horn allows vertical or horizontal mounting
- 90×60° dispersion from a vertical position
- Constant directivity horn supplies smooth, level coverage without roll-off
- Universal switching mode power supply offers maximum power, along with stable, worry-free operation
- Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating
Tech Specs
- Powered:Yes
- Power Configuration:Bi-amped Class D
- Channels:2
- LF Driver Size:12″ Cone, 3″ Voice Coil with Neodymium Magnet
- HF Driver Size:2″ HF Compression Driver, 1″ Throat
- LF Driver Power Amp:850W Continuous
- HF Driver Power Amp:100W Continuous
- Total Power:2000W Dynamic Peak
- Inputs:2 x XLR-1/4″ combo (line in)
- Outputs:2 x XLR (thru/output)
- USB:1 x Type A
- Frequency Range:39Hz-20khz (-10 dB)
- Crossover Frequency:1.8kHz
- Maximum Peak SPL:139 dB SPL @ 1m
- Horizontal Coverage Angle:90 Degrees
- Vertical Coverage Angle:60 Degrees
- Signal Processing:PEQ, Delay, Routing, 8 User Presets
- Enclosure Material:Plywood Cabinet with Polyurea Coating
- Mounting Options:Pole: 2 x 1.37″ (35mm) socket; Fly: 12 x M10; Floor Wedge
- Power Source:Standard IEC AC cable
- Height:25.4″
- Width:16.1″
- Depth:15.5″
- Weight:47.2 lbs.
- Manufacturer Part Number:DZR12
