Powered Speakers Archives - Page 7 of 9

Showing 73–84 of 100 results

Compare
Quick View
Behringer Eurolive B208D Powered Speakers
Powered Speakers
₹23,999.00
Big Sound in a Lightweight Speaker
The Behringer Eurolive B208D powered PA speaker puts out big sound at a small price. Featuring an impressive power-to-weight ratio and built-in sound processing, the B208Ds pack a punch yet are easy to transport. And thanks to the cabinet design, the B208D can be laid on its side for use as a stage monitor. It even makes a great single-speaker PA for public address or background music – just connect a microphone or music player and you’re ready to go. And with technology built-in to prevent overloads, you’ll always get a consistent sound from the Behringer Eurolive B208D speakers.

Behringer Eurolive B208D Powered PA Speaker at a Glance:
- High power, low weight
- Built-in DSP
- Flexible applications
High Power, Low Weight:The B208D packs dual power amps for the 8″ LF and 1.35″ HF drivers for a total of 200 watts of peak power in a 15 pound package. The Eurolive series features Class D amps for maximum efficiency and low operating temperatures, so you can use them all day long without worrying about overheating.

Built-in DSP:Behringer’s Eurolive series of loudspeakers feature built-in signal processing to optimize your sound quality. The B208D has an intelligent crossover, EQ, and limiter design to make sure your speakers never overload. As you raise the volume, the crossover and EQ slightly lower bass frequencies to prevent muddiness and distortion. The limiter prevents your input signal from clipping, so you’ll always hear clean audio.

Flexible Applications:You can connect a variety of signals to the B208D, making it a very flexible speaker. Use a pair of them for your main sound system or lay them on their side and use them as stage monitors. Or, just connect a single microphone for public address. The B208Ds are even pole-mountable, so you can position them any way you need to.

Behringer Eurolive B208D Powered PA Speaker Features:
- Huge power-to-weight ratio for a powerful yet easily transportable PA
- Built-in signal processing optimizes audio quality
- Class D amps for efficiency and reliability
- Angled design allows it to be used as a stage monitor
- Custom drivers designed and built by Behringer
For a powerful yet lightweight PA, check out the Behringer Eurolive 208D!
Tech Specs
- Powered:Yes
- Power Configuration:Bi-amped
- LF Driver Size:1 x 8″
- HF Driver Size:1.35″
- LF Driver Power Amp:135W Continuous
- HF Driver Power Amp:38W Continuous
- Total Power:200W Peak
- Inputs:1 x 1/4″, 1 x XLR
- Outputs:1 x XLR
- Frequency Range:65Hz-20kHz
- Crossover Frequency:2.4kHz
- Maximum Peak SPL:113dB
- Enclosure Material:Molded Plastic
- Mounting Options:Pole Mount with 1.37″ socket, Floor Wedge
- Power Source:Standard IEC AC cable
- Height:14.7″
- Width:8″
- Depth:9.8″
- Weight:14.7 lbs.
Add to cart
Compare
Quick View

Turbosound iQ15 Powered Speakers
Powered Speakers

The 2,500-Watt iQ15 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 15″ low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1″ compression driver with copper-clad aluminium voice coil for extended high frequency reproduction.

Equipped with a very efficient and lightweight two channel KLARK TEKNIK Class-D power amplifier, the iQ15 provides an impressive 2,500 Watts of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels – and long-term reliability. iQ15’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected loudspeakers.

KLARK TEKNIK also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to easily optimise the iQ15’s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors.

On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ15 features a mic/line switch and level control with signal present LED on each channel.

The iQ15 also features our proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analogue methods, but also significantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ15 via PC computer, as well as DSP and speaker modelling firmware updates.

The lightweight fibre glass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille and multiple internal rigging points for permanent installations. The iQ15 is also fitted with a dual angle pole mount socket, allowing the enclosure to be pole mounted straight on, or raised and angled downwards for optimal audience coverage. Mains power input and link output is provided via Neutrik powerCON* connectors.

Detailed Product Information
Compare
Quick View

Turbosound iQ8 Powered Speakers
Powered Speakers

The 2,500-Watt iQ8 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 8″ low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1″ compression driver with copper clad aluminium voice coil for extended high frequency reproduction.

Equipped with a very efficient and lightweight two channel KLARK TEKNIK Class-D power amplifier, the iQ8 provides an impressive 2,500 Watts of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels – and long-term reliability. iQ8’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected loudspeakers.

KLARK TEKNIK also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to easily optimise the iQ8’s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors.

On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ8 features a mic/line switch and level control with signal present LED on each channel.

The iQ8 also features our proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analogue methods, but also significantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ8 via PC computer, as well as DSP and speaker modelling firmware updates.

The lightweight fibre glass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille and multiple internal rigging points for permanent installations. The iQ8 is also fitted with a dual angle pole mount socket, allowing the enclosure to be pole mounted straight on, or raised and angled downwards for optimal audience coverage. Mains power input and link output is provided via Neutrik powerCON* connectors.

Detailed Product Information
Compare
Quick View

Turbosound iX12 Powered Speakers
Powered Speakers

The 1000-Watt iX12 is a powered two-way 12″ loudspeaker with Bluetooth* audio streaming ideally suited for a wide range of portable and fixed music and speech sound reinforcement applications. A state-of-the-art KLARK TEKNIK DSP controls the built-in 3-channel digital mixer via a single-knob user interface, as well as providing comprehensive wireless remote control via dedicated app for iPhone/iPad. The iX12’s powerful 12″ low frequency driver and 1″ titanium dome compression driver ensure highest-quality low end, extended high frequency reproduction and articulate midrange reproduction.

The iX12 is fitted with a dual angle pole mount socket, allowing it to be pole mounted straight on, or raised higher and angled downwards to optimise audience coverage. The lightweight fibre glass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille.

Detailed Product Information
Compare
Quick View

Turbosound iX15 Powered Speakers
Powered Speakers

The 1000-Watt iX15 is a powered two-way 15″ loudspeaker with Bluetooth* audio streaming ideally suited for a wide range of portable and fixed music and speech sound reinforcement applications. A state-of-the-art KLARK TEKNIK DSP controls the built-in 3-channel digital mixer via a single-knob user interface, as well as providing comprehensive wireless remote control via dedicated app for iPhone/iPad. The iX15’s powerful 15″ low frequency driver and 1″ titanium dome compression driver ensure highest-quality low end, extended high frequency reproduction and articulate midrange reproduction.

The iX15 is fitted with a dual angle pole mount socket, allowing it to be pole mounted straight on, or raised higher and angled downwards to optimise audience coverage. The lightweight fibre glass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille.

Detailed Product Information
Compare
Quick View

Turbosound Milan M10 Powered Speakers
Powered Speakers

The 600-Watt full range MILAN M10 is a portable 10″ two-way powered loudspeaker featuring: two independent input channels with Mic and Line Inputs, selectable via a Mic/Line switch; a two-band master EQ (Bass, Treble); intelligent Limiting; and a Mix Out function for connecting additional powered loudspeakers for easy system expansion.

Designed for both portable and permanent install applications, the M10’s discrete inputs are each equipped with balanced, combination ¼ ” jack/ XLR connectors and a Level control, making them ideally suited for a wide range of music sources, from low-impedance microphones, acoustic guitars and keyboards – to mp3 players and mixing consoles.

Detailed Product Information
Compare
Quick View
Yamaha DZR315 Powered Speakers
Powered Speakers
The Yamaha DZR315 is a 3-way powered speaker with Class-D bi-amplification. The DZR315 is ideal for DJs, and performers who appreciate tight bass, clear vocals and crisp highs. Even at high sound levels, the Yamaha DZR315 produces distortion-free audio.

Yamaha’s 96kHz DSP processor focuses the speaker’s power into high-res sound. Advanced FIR-X tuning technology delivers a smooth frequency response. The result is stunning clarity from the DZR315 speaker without phase distortion.

An onboard LCD screen lets you easily navigate the DSP functions. Store up to eight presets to save your custom adjustments. Saved settings can easily transferred to a USB flash drive.

The DZR315 powered speaker features D-CONTOUR, which is an intelligent multi-band compressor. It ensures your DZR315’s sound stays consistent and clear at any volume. The D-CONTOUR technology constantly monitors the output of multiple frequency bands. Then it applies the ideal EQ adjustments for band. There are two D-CONTOUR modes: FOH/MAIN and MONITOR. These settings give you more detailed tuning of your sound, depending on your system’s setup.

DSP protection built into the Yamaha DZR315 extends the life of its components. It also maximizes output. Yamaha’s DSP monitors the status of the power supply, power amplifiers, transducers and signal levels. This allows the DSP to protect each component of the DZR315 and maximize performance.

The DZR315 3-way speaker uses a redesigned Class-D power module. With 2,000W peak output, it delivers best-in-class power. It provides up to 143dB SPL and is optimized to match all three drivers. The DZR315 is fitted with a 15” woofer, 8” mid-range driver and a 1” tweeter.

A durable Polyurea coating protects the finish of the DZR315’s rugged plywood enclosure. It also features butterfly joints for extra strength. Yamaha didn’t cut any corners designing this cabinet. It’s built for professional use and life on the road.

Features

3-way, full-range powered speaker

Rugged wooden cabinet

15″ woofer, 8″ mid-range driver and 1″ tweeter

Onboard DSP and D-CONTOUR technology

Bi-amplified with 2,000W Class-D power
Specifications
Speaker Configuration

Active/passive: Active

Type: 3-way

LF driver: 15″

MF driver: 8″

HF driver: 1″

Power

Amplifier class: D

Wattage: 1,300W/2,000W

Mixer/preamp: Yes

Audio

Frequency response: 31Hz – 20kHz

Coverage pattern: 75° x 50°

Max SPL: 143dB

Inputs

XLR: 2

TRS: Not applicable

TS: Not applicable

RCA: Not applicable

SPEAKON: Not applicable

Outputs

XLR: 2

TRS: Not applicable

TS: Not applicable

RCA: Not applicable

SPEAKON: Not applicable

Enclosure

Cabinet material: Plywood

Width: 21.6″

Height: 35.3″

Depth: 20.5″

Weight: 91.7 lb.
Read more
Compare
Quick View
Yamaha DZR15 Powered Speakers
Powered Speakers
Power, Performance, and Easy System Integration
The Yamaha DZR15 offers superb clarity and best-in-class SPL performance. This 2-way bi-amped PA speaker boasts a high-power 2,000-watt Class D amplifier, a 34Hz–20kHz frequency range, and can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while optimized presets and an intuitive LCD display make dialing in your settings a piece of cake. As a powered PA speaker, the DZR15 integrates with any configuration. It can also operate effectively as a stage monitor. The DZR15 employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating.
Sophisticated DSP processing

Here, we’re impressed by the DZR15’s intelligent DSP processing. Yamaha’s Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion, ensuring smooth frequency response, stunning clarity, and accurate sound imaging. D-Contour is an intelligent multiband compressor that maintains the ultimate in clarity, even when you push the DZR15 to its highest output level. D-Contour features two settings, FOH/MAIN and MONITOR mode, allowing you to fine-tune the DZR15’s sound based on your application. You also get DSP protection that safeguards your power supply, power amplifiers, and transducers against damage. Despite all this powerful DSP, the DZR15 remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.

Custom-designed transducers

The Yamaha DZR15 is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a heat-resistant aluminum-cast frame. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful, yet lightweight, neodymium magnet to handle the chest-thumping low end that the DZR15 delivers. The DZR15 isn’t just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction — even at cranked volumes.

Smart, ultra-flexible design

The DZR15 integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90×50° dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the DZR15’s constant directivity horn — its innovative design minimizes the roll-off that conventional horns often produce.

High-power Class D amplifier

Loaded with 2,000 watts of Class D power, the Yamaha DZR15 is a beast. It delivers an impressive 139dB SPL, so go ahead and crank it up — the DZR15 can take it. Enjoy maximum power, along with stable, worry-free operation, thanks to a universal switching mode power supply. Beyond that, this amp was optimized to match the DZR15’s transducers, ensuring top-tier sound quality.

Yamaha DZR15 Features:

2-way powered loudspeaker with 2″ HF and 15″ LF drivers

Boasts a high-power 2,000-watt Class D amplifier and 34Hz–20kHz frequency range

Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion

D-Contour is an intelligent multiband compressor that maintains clarity at high output levels

FOH/MAIN and MONITOR modes allow you to fine-tune your sound based on your application

DSP protection safeguards your power supply, power amplifiers, and transducers against damage

Optimized factory presets and intuitive LCD screen make operation easy

Great-sounding, custom-designed transducers

Rotatable horn allows vertical or horizontal mounting

90×50° dispersion from a vertical position

Constant directivity horn supplies smooth, level coverage without roll-off

Universal switching mode power supply offers maximum power, along with stable, worry-free operation

Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating

Tech Specs

Powered:Yes

Power Configuration:Bi-amped Class D

Channels:2

LF Driver Size:15″ Cone, 3″ Voice Coil with Neodymium Magnet

HF Driver Size:2″ HF Compression Driver, 1″ Throat

LF Driver Power Amp:850W Continuous

HF Driver Power Amp:100W Continuous

Total Power:2000W Dynamic Peak

Inputs:2 x XLR-1/4″ combo (line in)

Outputs:2 x XLR (thru/output)

USB:1 x Type A

Frequency Range:34Hz-20khz (-10 dB)

Crossover Frequency:1.7kHz

Maximum Peak SPL:139 dB SPL @ 1m

Horizontal Coverage Angle:90 Degrees

Vertical Coverage Angle:50 Degrees

Signal Processing:PEQ, Delay, Routing, 8 User Presets

Enclosure Material:Plywood Cabinet with Polyurea Coating

Mounting Options:Pole: 2 x 1.37″ (35mm) socket; Fly: 12 x M10; Floor Wedge

Power Source:Standard IEC AC cable

Height:30″

Width:17.7″

Depth:18.1″

Weight:55.6 lbs.

Manufacturer Part Number:DZR15
Read more
Compare
Quick View
Yamaha DZR12 Powered Speakers
Powered Speakers
Power, Performance, and Easy System Integration
The Yamaha DZR12 offers superb clarity and best-in-class SPL performance. This 2-way bi-amped PA speaker boasts a high-power 2,000-watt Class D amplifier, a 39Hz–20kHz frequency range, and can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while optimized presets and an intuitive LCD display make dialing in your settings a piece of cake. As a powered PA speaker, the DZR12 integrates with any configuration. It can also operate effectively as a stage monitor. The DZR12 employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating.
Sophisticated DSP processing

Here, we’re impressed by the DZR12’s intelligent DSP processing. Yamaha’s Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion, ensuring smooth frequency response, stunning clarity, and accurate sound imaging. D-Contour is an intelligent multiband compressor that maintains the ultimate in clarity, even when you push the DZR12 to its highest output level. D-Contour features two settings, FOH/MAIN and MONITOR mode, allowing you to fine-tune the DZR12’s sound based on your application. You also get DSP protection that safeguards your power supply, power amplifiers, and transducers against damage. Despite all this powerful DSP, the DZR12 remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.

Custom-designed transducers

The Yamaha DZR12 is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a heat-resistant aluminum-cast frame. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful, yet lightweight, neodymium magnet to handle the chest-thumping low end that the DZR12 delivers. The DZR12 isn’t just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction — even at cranked volumes.

Smart, ultra-flexible design

The DZR12 integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90×60° dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the DZR12’s constant directivity horn — its innovative design minimizes the roll-off that conventional horns often produce.

High-power Class D amplifier

Loaded with 2,000 watts of Class D power, the Yamaha DZR12 is a beast. It delivers an impressive 139dB SPL, so go ahead and crank it up — the DZR12 can take it. Enjoy maximum power, along with stable, worry-free operation, thanks to a universal switching mode power supply. Beyond that, this amp was optimized to match the DZR12’s transducers, ensuring top-tier sound quality.

Yamaha DZR12 Features:

2-way powered loudspeaker with 2″ HF and 12″ LF drivers

Boasts a high-power 2,000-watt Class D amplifier and 39Hz–20kHz frequency range

Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion

D-Contour is an intelligent multiband compressor that maintains clarity at high output levels

FOH/MAIN and MONITOR modes allow you to fine-tune your sound based on your application

DSP protection safeguards your power supply, power amplifiers, and transducers against damage

Optimized factory presets and intuitive LCD screen make operation easy

Great-sounding, custom-designed transducers

Rotatable horn allows vertical or horizontal mounting

90×60° dispersion from a vertical position

Constant directivity horn supplies smooth, level coverage without roll-off

Universal switching mode power supply offers maximum power, along with stable, worry-free operation

Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating

Tech Specs

Powered:Yes

Power Configuration:Bi-amped Class D

Channels:2

LF Driver Size:12″ Cone, 3″ Voice Coil with Neodymium Magnet

HF Driver Size:2″ HF Compression Driver, 1″ Throat

LF Driver Power Amp:850W Continuous

HF Driver Power Amp:100W Continuous

Total Power:2000W Dynamic Peak

Inputs:2 x XLR-1/4″ combo (line in)

Outputs:2 x XLR (thru/output)

USB:1 x Type A

Frequency Range:39Hz-20khz (-10 dB)

Crossover Frequency:1.8kHz

Maximum Peak SPL:139 dB SPL @ 1m

Horizontal Coverage Angle:90 Degrees

Vertical Coverage Angle:60 Degrees

Signal Processing:PEQ, Delay, Routing, 8 User Presets

Enclosure Material:Plywood Cabinet with Polyurea Coating

Mounting Options:Pole: 2 x 1.37″ (35mm) socket; Fly: 12 x M10; Floor Wedge

Power Source:Standard IEC AC cable

Height:25.4″

Width:16.1″

Depth:15.5″

Weight:47.2 lbs.

Manufacturer Part Number:DZR12
Read more
Compare
Quick View
Yamaha DZR10 Powered Speakers
Powered Speakers
Power, Performance, and Easy System Integration
The Yamaha DZR10 offers superb clarity and best-in-class SPL performance. This 2-way bi-amped PA speaker boasts a high-power 2,000-watt Class D amplifier, a 44Hz–20kHz frequency range, and can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while optimized presets and an intuitive LCD display make dialing in your settings a piece of cake. As a powered PA speaker, the DZR10 integrates with any configuration. It can also operate effectively as a stage monitor. The DZR10 employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating.
Sophisticated DSP processing

Here, we’re impressed by the DZR10’s intelligent DSP processing. Yamaha’s Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion, ensuring smooth frequency response, stunning clarity, and accurate sound imaging. D-Contour is an intelligent multiband compressor that maintains the ultimate in clarity, even when you push the DZR10 to its highest output level. D-Contour features two settings, FOH/MAIN and MONITOR mode, allowing you to fine-tune the DZR10’s sound based on your application. You also get DSP protection that safeguards your power supply, power amplifiers, and transducers against damage. Despite all this powerful DSP, the DZR10 remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.

Custom-designed transducers

The Yamaha DZR10 is loaded with great-sounding, custom-designed transducers. Its high-frequency transducer includes a 2-inch voice coil and 1-inch throat compression driver, a titanium diaphragm, and neodymium magnet housed in a heat-resistant aluminum-cast frame. Its low-frequency transducer uses a large 3-inch voice coil, cast-aluminum frame, and powerful, yet lightweight, neodymium magnet to handle the chest-thumping low end that the DZR10 delivers. The DZR10 isn’t just all about power, however. Its low-end response is tightly controlled, especially in the mid-bass and vocal range, assuring crystal-clear sound reproduction — even at cranked volumes.

Smart, ultra-flexible design

The DZR10 integrates with any configuration, thanks to its ultra-flexible design. Its rotatable horn allows vertical or horizontal mounting. Benefit from a 90×60° dispersion from a vertical position. Enjoy smooth, level coverage, by virtue of the DZR10’s constant directivity horn — its innovative design minimizes the roll-off that conventional horns often produce.

High-power Class D amplifier

Loaded with 2,000 watts of Class D power, the Yamaha DZR10 is a beast. It delivers an impressive 137dB SPL, so go ahead and crank it up — the DZR10 can take it. Enjoy maximum power, along with stable, worry-free operation, thanks to a universal switching mode power supply. Beyond that, this amp was optimized to match the DZR10’s transducers, ensuring top-tier sound quality.

Yamaha DZR10 Features:

2-way powered loudspeaker with 2″ HF and 10″ LF drivers

Boasts a high-power 2,000-watt Class D amplifier and 44Hz–20kHz frequency range

Advanced FIR-X tuning employs a combination of FIR filtering and corrective EQ to minimize phase distortion

D-Contour is an intelligent multiband compressor that maintains clarity at high output levels

FOH/MAIN and MONITOR modes allow you to fine-tune your sound based on your application

DSP protection safeguards your power supply, power amplifiers, and transducers against damage

Optimized factory presets and intuitive LCD screen make operation easy

Great-sounding, custom-designed transducers

Rotatable horn allows vertical or horizontal mounting

90×60° dispersion from a vertical position

Constant directivity horn supplies smooth, level coverage without roll-off

Universal switching mode power supply offers maximum power, along with stable, worry-free operation

Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating

Tech Specs

Powered:Yes

Power Configuration:Bi-amped

Channels:2

LF Driver Size:10″ Cone, 3″ Voice Coil with Neodymium Magnet

HF Driver Size:2″ HF Compression Driver, 1″ Throat

LF Driver Power Amp:1000W Peak, 920W Continuous

HF Driver Power Amp:1000W Peak, 380W Continuous

Total Power:2000W Class D Peak, 1300W Continuous

Inputs:2 x XLR-1/4″ combo (line in)

Outputs:2 x XLR (thru/output)

USB:1 x Type A

Frequency Range:44Hz-20kHz (-10 dB)

Crossover Frequency:1.8kHz

Maximum Peak SPL:137 dB SPL @ 1m

Horizontal Coverage Angle:90 Degrees

Vertical Coverage Angle:60 Degrees

Signal Processing:PEQ, Delay, Routing, 8 User Presets

Enclosure Material:Plywood Cabinet with Polyurea Coating

Mounting Options:Pole: 2 x 1.37″ (35mm) socket; Fly: 8 x M10, 2 x M8; Floor Wedge

Power Source:Standard IEC AC cable

Height:21.1″ (with feet)

Width:12.4″

Depth:13.6″

Weight:39.5 lbs.

Manufacturer Part Number:DZR10
Read more
Compare
Quick View
Yamaha DXS18XLF Powered Subwoofer
Powered Speakers
₹91,999.00
Power, Performance, and Easy System Integration

The Yamaha DXS18XLF offers thunderous low end, superb clarity, and best-in-class SPL performance. This powered bass-reflex subwoofer boasts a high-power 1,600-watt Class D amplifier, a 30Hz–150Hz frequency range, and can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while optimized presets and an intuitive LCD display make dialing in your settings a piece of cake. This sub employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating. The DXS18XLF is a must-have for completing your full-range DZR system.
Sophisticated DSP processing

Here, we’re impressed by the DXS18XLF’s intelligent DSP processing. Yamaha’s D-XSUB LF processing gives you total command of your low end. Choose between a NORMAL mode that offers balanced low-frequency response and a BOOST mode that provides tighter, more focused bass with extra punch. Beyond that, XTENDED LF mode drops your low-end even lower, yielding chest-thumping low-frequencies that must be heard to be believed. Ensure a clean stage monitoring environment, thanks to the DXS18XLF’s Cardioid Mode, which effectively decreases the sound pressure onstage while increasing the low-frequency output directed towards your audience. Despite all this powerful DSP, the DXS18XLF remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.

Custom-designed transducer

The Yamaha DXS18XLF is loaded with a great-sounding, custom-designed transducer. Its durable die-cast aluminum frame and 4-inch voice coil deliver impressive bass response, even at cranked volumes. Experience extraordinary low-frequency linearity, thanks to the DXS18XLF’s dual damper, which mitigates unwanted vibration during high-output situations.

Yamaha DXS15XLF Features:

Powered subwoofer with 18″ LF driver

A must-have for completing your full-range DZR system

Boasts a high-power 1,600-watt Class D amplifier and 30Hz–150Hz frequency range

D-XSUB LF processing gives you total command of your low end with NORMAL, BOOST, and XTENDED LF modes

Cardioid Mode decreases stage volume while increasing the low-frequency output directed towards your audience

Optimized factory presets and intuitive LCD screen make operation easy

Great-sounding, custom-designed transducer

Dual damper ensures extraordinary low-frequency linearity during high-output situations

Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating

Tech Specs

Powered/Unpowered:Powered

LF Driver Size:18″ Cone, 4″ Voice Coil, Ferrite Magnet

Power Rating:1230W Continuous

Total Power:1600W Peak

Inputs:2 x XLR-1/4″ combo

Outputs:2 x XLR (thru/output)

Other I/O:1 x USB Type A

Frequency Range:30Hz-150hz (-10 dB)

Maximum Peak SPL:136dB SPL @ 1m

Signal Processing:EQ, Delay, Cardioid Mode, D-XSUB Processing

Mounting Options:Floor, Pole Mount with 1.37″ (35mm) and M20 sockets

Power Source:Standard IEC AC cable

Enclosure Material:Plywood Cabinet with Polyurea Coating, Black Finish

Height:25.9″ (with feet)

Width:21.7″

Depth:28.3″

Weight:107.8 lbs.

Manufacturer Part Number:DXS18XLF
Add to cart
Compare
Quick View
Yamaha DXS15XLF Powered Subwoofer
Powered Speakers
₹89,999.00
Power, Performance, and Easy System Integration

The Yamaha DXS15XLF offers thunderous low end, superb clarity, and best-in-class SPL performance. This powered bass-reflex subwoofer boasts a high-power 1,600-watt Class D amplifier, a 33Hz–150Hz frequency range, and can tackle any application you throw at it. Sophisticated DSP processing yields high-resolution sound with super-low latency, while optimized presets and an intuitive LCD display make dialing in your settings a piece of cake. This sub employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating. The DXS15XLF is a must-have for completing your full-range DZR system.
Sophisticated DSP processing

Here , we’re impressed by the DXS15XLF’s intelligent DSP processing. Yamaha’s D-XSUB LF processing gives you total command of your low end. Choose between a NORMAL mode that offers balanced low-frequency response and a BOOST mode that provides tighter, more focused bass with extra punch. Beyond that, XTENDED LF mode drops your low-end even lower, yielding chest-thumping low-frequencies that must be heard to be believed. Ensure a clean stage monitoring environment, thanks to the DXS15XLF’s Cardioid Mode, which effectively decreases the sound pressure onstage while increasing the low-frequency output directed towards your audience. Despite all this powerful DSP, the DXS15XLF remains easy to use, thanks to optimized factory presets and an intuitive LCD screen.

Custom-designed transducer

The Yamaha DXS15XLF is loaded with a great-sounding, custom-designed transducer. Its durable die-cast aluminum frame and 4-inch voice coil deliver impressive bass response, even at cranked volumes. Experience extraordinary low-frequency linearity, thanks to the DXS15XLF’s dual damper, which mitigates unwanted vibration during high-output situations.

Yamaha DXS15XLF Features:

Powered subwoofer with 15″ LF driver

A must-have for completing your full-range DZR system

Boasts a high-power 1,600-watt Class D amplifier and 33Hz–150Hz frequency range

D-XSUB LF processing gives you total command of your low end with NORMAL, BOOST, and XTENDED LF modes

Cardioid Mode decreases stage volume while increasing the low-frequency output directed towards your audience

Optimized factory presets and intuitive LCD screen make operation easy

Great-sounding, custom-designed transducer

Dual damper ensures extraordinary low-frequency linearity during high-output situations

Lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating

Tech Specs

Powered/Unpowered:Powered

LF Driver Size:15″ Cone, 4″ Voice Coil, Ferrite Magnet

Power Rating:1230W Continuous

Total Power:1600W Peak

Inputs:2 x XLR-1/4″ combo

Outputs:2 x XLR (thru/output)

Other I/O:1 x USB Type A

Frequency Range:33Hz-150hz (-10 dB)

Maximum Peak SPL:136dB SPL @ 1m

Signal Processing:EQ, Delay, Cardioid Mode, D-XSUB Processing

Mounting Options:Floor, Pole Mount with 1.37″ (35mm) and M20 sockets

Power Source:Standard IEC AC cable

Enclosure Material:Plywood Cabinet with Polyurea Coating, Black Finish

Height:23.1″

Width:17.7″

Depth:23.6″

Weight:88.2 lbs.

Manufacturer Part Number:DXS15XLF
Add to cart