Shop

Showing 277–288 of 918 results

Compare
Quick View
QSC RMX2450a Power Amplifier
Amplifiers
₹51,999.00
A Clean, Reliable Power Amp!
You can count on the QSC RMX2450a when you need a reliable, tour-quality power amplifier. The sound is clear and powerful, with flexible options to help you fine-tune your sound system. The RMX2450a lets you choose between 30Hz and 50Hz low-cut filters to optimize your sound, plus a defeatable clipping limiter to protect your speakers against signal spikes. And with both XLR and 1/4″ balanced inputs, this power amp is ready to integrate into virtually any sound system. For awesome sound that you can count on for years, call us for the QSC RMX2450a power amplifier.

QSC RMX2450a Power Amplifier at a Glance:
- Compact chassis leaves more room in your rack
- Quality connections for reliable performance
- Optimize your sound with a switchable low-cut filter
Compact chassis leaves more room in your rack

Rack space counts, especially when you’re touring the country with tons of equipment. The QSC RMX2450a packs a ton of power into a chassis that’s less than 16″ deep, which gives you more room to make connections and manage your rack equipment.

Quality connections for reliable performance

The QSC RMX2450a power amplifier has both XLR and 1/4″ balanced inputs, plus vinding post and speakON outputs for maximum convenience. Whether you’re playing at the local club or managing a large-scale stage production, it’s easy to integrate the QSC RMX2450a into virtually any system that requires powerful, transparent audio performance.

Optimize your sound with a switchable low-cut filter

There’s a low-cut filter on the QSC RMX2450a, to help protect your speakers and also help you maintain more headroom. Set it at 30Hz if you’re using the RMX2450a to power a subwoofer, giving you powerful low-frequency response while filtering out sub-sonics that eat up your headroom. Set it to 50Hz if you’re powering main speakers, giving you even more headroom for clear, dynamic, full-range sound while maintaining powerful low-end presence.

QSC RMX2450a Power Amplifier Features:
- Stereo or bridged-mono power amplifier
- Compact chassis is less than 16″ deep, leaving you more space in the back of your rack
- Flexible I/O with XLR and 1/4″ balanced inputs, plus binding posts and speakON outputs
- Front-mounted gain controls give you fast, easy access to your signal levels
- Switchable 30Hz/50Hz low-cut filter lets you fine-tune your system for maximum headroom
- Signal and Clip LED indicators let you monitor performance at a glance
- Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
- Defeatable clipping limiter protects speakers against signal spikes
For Proven reliability and great sound, choose the QSC RMX2450a!
Add to cart
Compare
Quick View
QSC RMX4050a Power Amplifier
Amplifiers
₹87,999.00
This Powerful Amplifer is a Big Performer and a Great Value!
You can count on the QSC RMX4050a when you need a reliable, tour-quality power amplifier. The sound is clear and powerful, with flexible options to help you fine-tune your sound system. The RMX4050a lets you choose between 30Hz and 50Hz low-cut filters to optimize your sound, plus a defeatable clipping limiter to protect your speakers against signal spikes. And with both XLR and 1/4″ balanced inputs, this power amp is ready to integrate into virtually any sound system. For awesome sound that you can count on for years, call us for the QSC RMX4050a power amplifier.

QSC RMX4050a Power Amplifier at a Glance:
- Compact chassis leaves more room in your rack
- Quality connections for reliable performance
- Optimize your sound with a switchable low-cut filter
Compact chassis leaves more room in your rack

Rack space counts, especially when you’re touring the country with tons of equipment. The QSC RMX4050a packs a ton of power into a chassis that’s less than 16″ deep, which gives you more room to make connections and manage your rack equipment.

Quality connections for reliable performance

The QSC RMX4050a power amplifier has both XLR and 1/4″ balanced inputs, plus vinding post and speakON outputs for maximum convenience. Whether you’re playing at the local club or managing a large-scale stage production, it’s easy to integrate the QSC RMX4050a into virtually any system that requires powerful, transparent audio performance.

Optimize your sound with a switchable low-cut filter

There’s a low-cut filter on the QSC RMX4050a, to help protect your speakers and also help you maintain more headroom. Set it at 30Hz if you’re using the RMX4050a to power a subwoofer, giving you powerful low-frequency response while filtering out sub-sonics that eat up your headroom. Set it to 50Hz if you’re powering main speakers, giving you even more headroom for clear, dynamic, full-range sound while maintaining powerful low-end presence.

QSC RMX4050a Power Amplifier Features:
- Stereo or bridged-mono power amplifier
- Compact chassis is less than 16″ deep, leaving you more space in the back of your rack
- Flexible I/O with XLR and 1/4″ balanced inputs, plus binding posts and speakON outputs
- Front-mounted gain controls give you fast, easy access to your signal levels
- Switchable 30Hz/50Hz low-cut filter lets you fine-tune your system for maximum headroom
- Signal and Clip LED indicators let you monitor performance at a glance
- Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
- Defeatable clipping limiter protects speakers against signal spikes
For Proven reliability and great sound, choose the QSC RMX4050a!
Add to cart
Compare
Quick View
QSC RMX5050a Power Amplifier
Amplifiers
₹105,999.00
This Powerful Amplifier is a Big Performer and a Great Value!
You can count on the QSC RMX5050a when you need a reliable, tour-quality power amplifier. The sound is clear and powerful with flexible options to help you fine-tune your sound system. The RMX5050a lets you choose between 30Hz and 50Hz low-cut filters to optimize your sound, plus a defeatable clipping limiter to protect your speakers against signal spikes. And with both XLR and 1/4″ balanced inputs, this power amp is ready to integrate into virtually any sound system. For awesome sound that you can count on for years, call us for the QSC RMX5050a power amplifier.
Compact chassis leaves more room in your rack

Rack space counts, especially when you’re touring the country with tons of equipment. The QSC RMX5050a packs a ton of power into a chassis that’s less than 16″ deep, which gives you more room to make connections and manage your rack equipment.

Quality connections for reliable performance

The QSC RMX5050a power amplifier has both XLR and 1/4″ balanced inputs, plus binding post and speakON outputs for maximum convenience. Whether you’re playing at the local club or managing a large-scale stage production, it’s easy to integrate the QSC RMX5050a into virtually any system that requires powerful, transparent audio performance.

Optimize your sound with a switchable low-cut filter

There’s a low-cut filter on the QSC RMX5050a, to help protect your speakers and also help you maintain more headroom. Set it at 30Hz if you’re using the RMX5050a to power a subwoofer, giving you powerful low-frequency response while filtering out sub-sonics that eat up your headroom. Set it to 50Hz if you’re powering main speakers, giving you even more headroom for clear, dynamic, full-range sound while maintaining a powerful low-end presence.

QSC RMX5050a Power Amplifier Features:

Stereo or bridged-mono power amplifier

Compact chassis is less than 16″ deep, leaving you more space in the back of your rack

Flexible I/O with XLR and 1/4″ balanced inputs, plus binding posts and speakON outputs

Front-mounted gain controls give you fast, easy access to your signal levels

Switchable 30Hz/50Hz low-cut filter lets you fine-tune your system for maximum headroom

Signal and Clip LED indicators let you monitor performance at a glance

Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers

Defeatable clipping limiter protects speakers against signal spikes

Tech Specs

Number of Channels:2

Power Class:3-tier Class H

Watts/Side @ 8 ohms:1050W

Watts/Side @ 4 ohms:1600W

Watts/Side @ 2 ohms:2000W

Watts Bridged:3200W @ 8 ohms

Inputs:2 x XLR, 2 x 1/4″ TRS, 2 x Barrier Strips

Outputs:2 x speakON, 2 x dual Binding Post

Cooling System:Variable Speed Fan, back to front air flow

Filters:30Hz, 50Hz

Overload Protection:Full short circuit, open circuit, thermal, ultrasonic, RF protection

Rack Spaces:3U

Power Source:IEC C19 to NEMA 5-20 Plug included (20A outlet required)

Height:5.25″

Depth:15.9″

Width:19″

Weight:75 lbs.

Manufacturer Part Number:RMX5050A
Add to cart
Compare
Quick View
RME Fireface UCX II 40-channel USB Interface
Audio Interfaces & DI Boxes
RME’s Next-gen UCX with Femtosecond Clock

The RME Fireface UCX II packs a lot into its rugged half-rack housing. This 20-in/20-out USB audio interface includes two reference-quality microphone preamps and ample analog, digital, MIDI, and word clock connectivity for easy integration into any studio rig. The Fireface UCX II’s SteadyClock/femtosecond technology yields ultra-stable clocking, and its DC-coupled outputs permit sending CV/gate voltage control information to modular synths and other studio hardware. Take complete command of the Fireface UCX II with TotalMix FX — no external hardware mixer required — with loads of latency-free effects available for each channel. You also get comprehensive onboard metering, a DURec port for direct recording to a thumb drive or external hard drive, and support for RME’s ARC USB remote controller (sold separately). If want to upgrade your studio with a high-level audio interface, the Fireface UCX II is an excellent choice.
20-in/20-out audio interface in a half-rack package

The sheer power and flexibility of the Fireface UCX II are remarkable when you lay your eyes on it. Its space-saving half-rack design has a great clean look but still offers deep control over levels, sub-mixes, and gain structures. There are two reference-quality digitally controlled mic preamps, eight channels of balanced line-level I/O, line/instrument inputs, ADAT/AES/SPDIF I/O, a MIDI port, word clock I/O, and a headphone output. DC-coupled outputs permit sending CV/gate voltage control information to modular synths and other studio hardware. You also get onboard metering with peak and RMS calculation. Best of all, the Fireface UCX II achieves all of this while staying very straightforward and looking great in your rack. We’re impressed by the Fireface UCX II here— it packs a lot of power into a sleek-looking interface.

DURec enables direct USB recording and playback of 40 channels

Located on the back of the RME Fireface UCX II is a DURec port. This port enables direct recording and playback of 40 channels of audio to an external thumb drive or external hard drive up to 2 TB. RME’s cutting-edge hardware delivers improved performance, so you enjoy greater reliability — even with slow or multi-partitioned flash drives. Create time-stamped files, courtesy of an internal real-time clock, and enjoy advanced playback functions.

Ultra-stable SteadyClock FS technology

Boasting the same SteadyClock FS circuit as RME’s reference-quality ADI-2 Pro AD/DA converter, the Fireface UCX II takes self-jitter to new lows, eclipsing its predecessor’s already impressive performance with an upgraded analog PLL circuit and referencing both Direct Digital Synthesis and PLL to a low-phase-noise quartz crystal. In fact, the Fireface UCX II’s self-jitter reaches levels that are usually only available in master quartz clock mode, even while running in PLL mode. Thanks to this updated circuit, the Fireface UCX II reaches jitter specs as low as a femtosecond. Just to put it in perspective, that’s 1/1,000,000,000,000,000 of a second!

TotalMix FX provides latency-free processing, monitoring, and effects

The Fireface UCX II comes loaded with RME’s TotalMix FX engine. This dual-DSP system uses one DSP chip for monitor mixing, leaving the other free for latency-free effects and processing. The routing side of TotalMix FX gives you a fully flexible mixer with 20 input channels, 20 software playback channels, and 20 hardware output channels. Each of the Fireface UCX II’s channels features a 3-band parametric equalizer, low-cut filter, echo, reverb, compressor, expander, and auto level. That means you can track with the effects and processing you need, without ever having to worry about latency or your computer’s processing power.

Optional ARC USB remote provides convenient desktop control

RME’s ARC USB remote (sold separately) connects to your computer via USB and provides you with direct control over the Fireface UCX II. The ARC USB fits conveniently on your desktop and has 15 freely assignable and illuminated buttons, one encoder wheel, and a footswitch jack. ARC USB is completely plug and play. As soon as you connect it, TotalMix FX will detect it.

RME Fireface UCX II Features:

20-in/20-out USB 2.0 audio interface

Rugged, half-rack design has a great clean look but still offers deep control

2 digitally controlled microphone preamps enable reference-quality recording

Ample analog, digital, MIDI, and word clock connectivity makes integration with your studio easy

DC-coupled outputs permit sending CV/gate voltage control information to modular synths and other studio hardware

SteadyClock/femtosecond technology yields ultra-stable clocking

TotalMix FX gives you a fully flexible mixer with 20 input, 20 software playback, and 20 hardware output channels

Each channel boasts latency-free processing, including a 3-band EQ, low-cut filter, echo, reverb, compressor, expander, and auto level

Onboard metering with peak and RMS calculation for keeping an eye on your levels

DURec port captures audio directly to a thumb drive or external hard drive

Integrates with RME’s ARC USB remote controller (sold separately)

Tech Specs

Computer Connectivity:USB 2.0

Form Factor:Rackmount

Simultaneous I/O:20 x 20

Number of Preamps:2 x mic

Phantom Power:Yes

A/D Resolution:Up to 24-bit/192kHz

Effects:3-band EQ, Low-cut Filter, Reverb, Compressor, Expander, Auto Level

Analog Inputs:2 x 1/4″ (line/instrument), 2 x XLR-1/4″ combo (mic/line), 4 x 1/4″ (line)

Analog Outputs:6 x 1/4″ (line)

Digital Inputs:1 x Optical Toslink (ADAT)

Digital Outputs:1 x Optical Toslink (ADAT)

Headphones:1 x 1/4″

MIDI I/O:In/Out

USB:1 x Type A, 1 x Type B

Clock I/O:1 x Word Clock

Other I/O:1 x 9-pin (AES/EBU, S/PDIF)

OS Requirements – Mac:OS X 10.9.5 or later

OS Requirements – PC:Windows 7 SP1 or later

Rack Spaces:1U

Power Supply:12V DC power supply (included)

Height:1.73″

Width:8.5″

Depth:5.1″

Weight:2.0 lbs.

Manufacturer Part Number:Fireface UCX II
Read more
Compare
Quick View
Rode M2 Condenser Vocal Microphone
Wired Microphones
₹10,999.00
Get Amazing Sound Onstage with This Condenser Mic From RODE!

The RODE M2 Handheld Condenser Microphone puts crystal-clear, studio-caliber sound reproduction in your hands! Though it gives you condenser-mic performance, the M2’s supercardioid pickup pattern and internal shockmount design makes it very resistant to feedback. It’s like having the best of both worlds onstage: the durability and dependability of a dynamic mic built into a high-performance condenser model! A locking on/off switch is handy for performers, and the effective windscreen protects the capsule while making the M2 very resistant to plosives.
RODE M2 Handheld Supercardioid Condenser Microphone at a Glance:

RODE quality

Designed for the stage

RODE quality
The M2 benefits from RODE’s extensive experience in crafting premium condenser microphones for studio, live and location use. This new microphone builds upon the foundation set by the TEC award-winning RODE S1.

Designed for the stage
Combining sound quality equal to that of the finest studio microphones, the M2 features a tailored response to reduce feedback, as well as an integrated shock mounting system to minimise handling noise. A locking on/off switch located on the microphone’s body provides the switching feature required by singers with self-operated sound systems, yet can be locked off when used in larger, dedicated operator environments.

RODE M2 Handheld Supercardioid Condenser Microphone Features:

Live condenser vocal microphone

Feedback rejecting supercardioid pickup pattern

Locking on/off switch

Heavy-duty metal body

High level of RF rejection

Low handling noise

Designed and manufactured in Australia

Zip pouch and stand mount with 3/8″ thread adapter included

Ten-year warranty

The RODE M2 puts studio-caliber sound reproduction in a handheld mic built for the stage!

Tech Specs

Microphone Type:Condenser

Polar Pattern:Supercardioid

Diaphragm Size:0.5″ (12.7mm)

Frequency Response:35Hz-20kHz

Max SPL:141dB

Output Impedance:50 ohms

Signal to Noise Ratio:71dB

Self Noise:23dB (A weighted)

Color:Black

Connector:XLR

Weight:0.7 lbs.

Included Accessories:Stand Clamp, Microphone Pouch

Manufacturer Part Number:M2
Add to cart
Compare
Quick View
Rode M5 Matched Pair Pencil Condenser Microphone
Wired Microphones
₹19,999.00
A Matched Pair of Microphones for Less!

If you’re looking for a pair of affordable small-diaphragm condenser microphones, take a look at the RODE M5 Matched Pair cardioid condenser microphones. These mics give you the kind of performance that will exceed what you’d expect from condensers at this price point. M5s are excellent mics for recording and sound reinforcement. They work great with guitars, percussion, strings, woodwinds, brass, and more. This matched pair is also great for stereo recording techniques.
RODE M5 Matched Pair of Small-diaphragm Condenser Mics at a Glance:

A mic pair for all occasions

All the accessories you need to get going

Consistent quality from RODE

A mic pair for all occasions

The exceptionally clear-sounding RODE M5 Matched Pair is ideal in the studio and onstage. A typical use of the M5 Matched Pair would be as drum overheads or recording high-hats. They’re excellent mics for recording practically any instrument – guitar, flute, violin, saxophone, drums, you name it! And this precision matched pair of condenser microphones is perfect for stereo XY and other stereo recording configurations.

All the accessories you need to get going

Ensuring that the M5 Matched Pair is ready to go out of the box, RODE included a pair of wind shields and stand mounts so you have everything you need to get started. The WS5 windscreens are perfect for outdoor reinforcement needs.

Consistent quality from RODE

RODE Microphones was one of the earliest established manufacturers of professional and affordable recording-quality condenser microphones. Committed to offering the highest quality microphones possible for the dollar, RODE has developed a solid reputation among professional and project studios the world over for just that. In fact, their NT2-A won a series of accolades including “World’s Best Studio Microphone” at the prestigious Frankfurt Musikmesse. With corporate headquarters and all manufacturing based in Australia, we continue to see some of the highest quality, affordable microphones in existence from RODE Microphones.

RODE M5 Matched Pair of Small-diaphragm Condenser Mics Features:

Matched pair of small-diaphragm cardioid condenser microphones

1/2″ capsules

Heavy duty ceramic-coated bodies

Frequency Response: 20Hz to 20kHz

Includes two WS5 wind shields

Includes two RM5 stand mounts

Requires +48V phantom power

Stock your studio with the affordable and flexible RODE M5 Matched Pair cardioid condenser microphones!
Tech Specs

Microphone Type:Condenser

Mono/Stereo:Stereo Pair

Polar Pattern:Cardioid

Frequency Response:20Hz-20kHz

Max SPL:140dB

Output Impedance:200 ohms

Signal to Noise Ratio:75dB (A weighted)

Color:Black

Connector:XLR

Weight:0.17 lbs.

Manufacturer Part Number:M5-MP
Add to cart
Compare
Quick View
Rode NT-USB+ Microphone
Recording Microphones
₹20,499.00
A High-quality USB Mic with Built-in DSP
The Rode NT-USB+ offers streamlined recording directly to your computer of mobile device. This high-quality USB condenser microphone boasts a large-diaphragm condenser capsule, along with an ultra-low-noise, high-gain Revolution Preamp for optimal sound on any source. You’ll appreciate the NT-USB+’s high-power headphones output, which offers zero latency — a must-have for monitoring in real time. Our favorite feature here is this USB mic’s powerful Aphex processing, which is accessible via Rode Connect podcasting and streaming software. The NT-USB+ comes with everything you need to get started, including a detachable pop filter, a desktop stand, a ring mount, and a USB-C cable.
Rode NT-USB+ USB Condenser Microphone Features:

Offers streamlined recording directly to your computer of mobile device

Ultra-low-noise, high-gain Revolution Preamp supplies optimal sound on any source

High-power headphones output features zero-latency monitoring

Powerful built-in Aphex processing via Rode Connect podcasting and streaming software

Comes with pop filter, desk stand, ring mount, and USB-C cable

Tech Specs

Microphone Type:Pressure Gradient Condenser

Polar Pattern:Cardioid

Diaphragm Size:0.5″ (12.7mm)

Frequency Response:20Hz-20kHz

A/D Resolution:24-bit/48kHz

Max SPL:118dB SPL

Dynamic Range:97dB

Color:Black

Connector:USB-C, 1/8″ (headphones)

Requirements – Mac:macOS 10.14 or later, iOS 14 or later

Requirements – PC:Windows 10 or later, Android 11 of later

Mounting Options:Mini Tripod, Ring Mount

Power Source:USB Powered

Dimensions:7.24″ x 2.44″

Weight:1.14 lbs

Included Accessories:Pop Filter, USB Cable

Manufacturer Part Number:NTUSB+
Add to cart
Compare
Quick View
Rode NT1 5th Generation Condenser Microphone with SM6 Shockmount and Pop Filter – Black
Recording Microphones
₹27,498.90
Transparent, Versatile Condenser Mic
The fifth evolution of the Rode NT1 Condenser Microphone comes with a handful of exciting updates, including a first-of-its-kind hybrid output that features both XLR and USB connections. From mixers and interfaces to directly recording to your computer, the NT1 is up for any connection. This mic is near silent, too, offering impeccable low self-noise at just 4dBA plus a super low noise Revolution Preamp for clear, hum-less recording. Additionally, the NT1’s onboard DSP features grant you total audio processing access with compression, gating, highpass filtering, and even more advanced APHEX processing controls. And to top it all off, the NT1 comes with an SM6 shockmount and pop filter combination, plus a couple of cables for a great value that gets you up and recording instantly. Studio pros recommend the NT1 5th Generation Condenser Microphone from Rode for ultra-clear studio recordings at a fantastic price.
Incomparably clear audio signal

Rode knows how to build workhorse condenser mics right, and the legacy of the NT1 is a testament to their accumulated trust within the industry. The NT1 is the world’s quietest studio condenser mic, backed by a minuscule 4dbA of self-noise and a low-noise Revolution Preamp to ensure your signal stays as clear as possible, preserving what you want to hear and eliminating what you don’t. Its cardioid polar pattern and large diaphragm, 1-inch gold-sputtered condenser capsule delivers your audio tracks with studio-grade warmth and precision, thanks to the NT1’s extended frequency range. Its sensitive engineering handles high sound pressure levels with no problem and converts analog to digital signals with 192kHz of high-resolution strength and stunningly unclippable 32-bit float digital output. See what we mean by “workhorse”?

Revolutionary hybrid XLR/USB output

There are no limits to where and how you can connect the Rode NT1. Courtesy of a proprietary XLR/USB hybrid output design, the NT1 can handle conjunctive usage in various applications, including audio mixing hardware and recording interfaces. Want to record tracks directly to your computer? Switch to the USB-C connection, and your stunning NT1 signal quality is delivered effortlessly to your DAW. This cardioid condenser mic offers pro-level production for studios of all calibers without the limitations of the past inhibiting your studio space or creative capabilities.

Bundled with the SM6 shockmount and pop screen

Rode wasn’t content to supply the NT1 with any ordinary shockmount. That’s why they came up with the SM6 combination shockmount and pop screen. The entire frame of the SM6 is made from an engineering-grade polymer, which provides excellent stability without much added weight. That makes the NT1 incredibly easy to use with any ordinary microphone stand in your studio. A dual Lyre suspension system offers superior resistance to vibration with none of the drawbacks of conventional rubber-band shockmounts. The SM6’s clamp is robust and easy to operate, and the pop filter offers excellent plosive protection.

Rode NT1 5th Generation USB Condenser Microphone with SM6 Shockmount and Pop Filter Features:

Large-diaphragm, gold-sputtered condenser capsule with cardioid polar pattern

4dBA of self-noise and low-noise Revolution Preamp supply virtually silent operation

Extended frequency range means superior signal capturing across the board

High-SPL handling accommodates tracking at all dynamics

Digital to analog conversion at a super-high resolution of 192kHz with 32-bit float digital output

XLR/USB hybrid output allows for simple integration into hardware- and computer-based studios

Onboard DSP and advanced APHEX controls, including compression, gating, highpass filtering, Aural Exciter, and Big Bottom effects

Includes an SM6 shockmount and pop screen for the utmost studio convenience

6m XLR cable and 3m SC29 USB-C to USB-C cables included!

Tech Specs

Microphone Type:Hybrid Condenser

Polar Pattern:Cardioid

Diaphragm Size:1″ (25mm)

Frequency Response:20Hz-20kHz

A/D Resolution:32-bit floating point/192kHz

Max SPL:142dB SPL

Output Impedance:100 ohms

Self Noise:4dB A weighted

Sensitivity:-32 dB (1V @ 1Pa)

Color:Black

Connector:USB, XLR

Software:APHEX DSP

Requirements – Mac:macOS 10.15 or later

Requirements – PC:Windows 10 or later

Power Source:USB bus powered, 48V phantom power

Dimensions:7.44″ x 2.04″

Weight:0.68 lbs.

Included Accessories:SM6 Shockmount, XLR Cable, USB-C to USB-C cable, Dust Cover

Manufacturer Part Number:NT1GEN5B
Add to cart
Compare
Quick View
Rode NT1 5th Generation Condenser Microphone with SM6 Shockmount and Pop Filter – Silver
Recording Microphones
₹27,498.90
Transparent, Versatile Condenser Mic
The fifth evolution of the Rode NT1 Condenser Microphone comes with a handful of exciting updates, including a first-of-its-kind hybrid output that features both XLR and USB connections. From mixers and interfaces to directly recording to your computer, the NT1 is up for any connection. This mic is near silent, too, offering impeccable low self-noise at just 4dBA plus a super low noise Revolution Preamp for clear, hum-less recording. Additionally, the NT1’s onboard DSP features grant you total audio processing access with compression, gating, highpass filtering, and even more advanced APHEX processing controls. And to top it all off, the NT1 comes with an SM6 shockmount and pop filter combination, plus a couple of cables for a great value that gets you up and recording instantly. Studio pros recommend the NT1 5th Generation Condenser Microphone from Rode for ultra-clear studio recordings at a fantastic price.
Incomparably clear audio signal

Rode knows how to build workhorse condenser mics right, and the legacy of the NT1 is a testament to their accumulated trust within the industry. The NT1 is the world’s quietest studio condenser mic, backed by a minuscule 4dbA of self-noise and a low-noise Revolution Preamp to ensure your signal stays as clear as possible, preserving what you want to hear and eliminating what you don’t. Its cardioid polar pattern and large diaphragm, 1-inch gold-sputtered condenser capsule delivers your audio tracks with studio-grade warmth and precision, thanks to the NT1’s extended frequency range. Its sensitive engineering handles high sound pressure levels with no problem and converts analog to digital signals with 192kHz of high-resolution strength and stunningly unclippable 32-bit float digital output. See what we mean by “workhorse”?

Revolutionary hybrid XLR/USB output

There are no limits to where and how you can connect the Rode NT1. Courtesy of a proprietary XLR/USB hybrid output design, the NT1 can handle conjunctive usage in various applications, including audio mixing hardware and recording interfaces. Want to record tracks directly to your computer? Switch to the USB-C connection, and your stunning NT1 signal quality is delivered effortlessly to your DAW. This cardioid condenser mic offers pro-level production for studios of all calibers without the limitations of the past inhibiting your studio space or creative capabilities.

Bundled with the SM6 shockmount and pop screen

Rode wasn’t content to supply the NT1 with any ordinary shockmount. That’s why they came up with the SM6 combination shockmount and pop screen. The entire frame of the SM6 is made from an engineering-grade polymer, which provides excellent stability without much added weight. That makes the NT1 incredibly easy to use with any ordinary microphone stand in your studio. A dual Lyre suspension system offers superior resistance to vibration with none of the drawbacks of conventional rubber-band shockmounts. The SM6’s clamp is robust and easy to operate, and the pop filter offers excellent plosive protection.

Rode NT1 5th Generation USB Condenser Microphone with SM6 Shockmount and Pop Filter Features:

Large-diaphragm, gold-sputtered condenser capsule with cardioid polar pattern

4dBA of self-noise and low-noise Revolution Preamp supply virtually silent operation

Extended frequency range means superior signal capturing across the board

High-SPL handling accommodates tracking at all dynamics

Digital to analog conversion at a super-high resolution of 192kHz with 32-bit float digital output

XLR/USB hybrid output allows for simple integration into hardware- and computer-based studios

Onboard DSP and advanced APHEX controls, including compression, gating, highpass filtering, Aural Exciter, and Big Bottom effects

Includes an SM6 shockmount and pop screen for the utmost studio convenience

6m XLR cable and 3m SC29 USB-C to USB-C cables included!

Tech Specs

Microphone Type:Hybrid Condenser

Polar Pattern:Cardioid

Diaphragm Size:1″ (25mm)

Frequency Response:20Hz-20kHz

A/D Resolution:32-bit floating point/192kHz

Max SPL:142dB SPL

Output Impedance:100 ohms

Self Noise:4dB A weighted

Sensitivity:-32dB (1V @ 1Pa)

Color:Silver

Connector:USB, XLR

Software:APHEX DSP

Requirements – Mac:macOS 10.15 or later

Requirements – PC:Windows 10 or later

Power Source:USB bus powered, 48V phantom power

Dimensions:7.44″ x 2.04″

Weight:0.68 lbs.

Included Accessories:SM6 Shockmount, XLR Cable, USB-C to USB-C cable, Dust Cover

Manufacturer Part Number:NT1GEN5
Add to cart
Compare
Quick View
Rode NT1 Signature Black Condenser Microphone
Recording Microphones
₹20,898.90
High-class Condenser Versatility
The NT1 Signature series microphone represents the pinnacle of Rode’s iconic NT1 design, thoughtfully constructed and reasonably priced to fit the likes of any level studio environment. Its traditional large-diaphragm cardioid design is a coveted quality among a range of musicians, vocalists, and content creators. Further, an emphasis on low noise guarantees solid, versatile performance on any project. Bass-heavy vocals and high-end instrument tones are no threat to the NT1’s wide 20Hz to 20kHz frequency range, ensuring crystalline occupancy over the entire audial spectrum. To top everything off, the NT1 Signature Series microphone includes an SM6 combination shockmount and pop filter, plus a 6-meter XLR cable for instant utility! If you’re looking for a reliable, time-trusted microphone option at a fantastic price, look no further than the NT1 Signature series microphone from Rode.
Proprietary NT1 signal delivery

Recording pros were happy to discover that Rode took no shortcuts when designing the NT1 Signature series condenser microphone. A familiar 1-inch large-diaphragm HF6 condenser capsule with a cardioid polar pattern ensures the rich tonal qualities expected of a traditional NT1 microphone. Moreover, 4dBA of A-weighted equivalent noise means you’ll have little to no interruptions in any signal path, keeping your recordings clear and consistent in any studio environment. A 20Hz to 20kHz frequency range and high SPL handling top off the NT1 Signature Series’ sound construction to present wide-reaching audio capture with an extremely dynamic range. If you’re familiar with Rode’s iconic NT1 sound, you’ll be right at home with an NT1 Signature series microphone in your setup.

Bundled with the SM6 shockmount and pop screen

Rode wasn’t content to supply the NT1 with any ordinary shockmount. That’s why they came up with the SM6 combination shockmount and pop screen. The entire frame of the SM6 is made from an engineering-grade polymer, which provides excellent stability without much added weight. That makes the NT1 incredibly easy to use with any ordinary microphone stand in your studio. A dual Lyre suspension system offers superior resistance to vibration with none of the drawbacks of conventional rubber-band shockmounts. The SM6’s clamp is robust and easy to operate, and the pop filter offers excellent plosive protection.

Rode NT1 Features:

A signature take on Rode’s compellingly popular NT1 condenser microphone model

Large-diaphragm HF6 1-in. condenser capsule with cardioid polar pattern — perfect for vocal and instrument recording, podcasts, streaming, and more

Extended 20Hz–20kHz frequency range ensures a superior, balanced signal on all ends

Low-noise (4dBA) capture for record-breaking condenser clarity

Ultra-high SPL handling accommodates tracking at all dynamics

Industry-standard 3-pin XLR output connection

Included combination shockmount and pop filter for instant integration into your recording setup

Premium scratch-resistant finish

Tech Specs

Microphone Type:Condenser Microphone

Polar Pattern:Cardioid

Diaphragm Size:1″ (25mm)

Frequency Response:20Hz-20kHz

Max SPL:142dB SPL

Output Impedance:100 ohms

Sensitivity:-32dBV/Pa

Self Noise:4dB (A-weighted)

Connector:XLR

Color:Black

Power Source:48V Phantom Power

Dimensions:7.44″ x 2.04″

Weight:11.04 oz

Included Accessories:1 x SM6 Shockmount with Pop Filter, 1 x 19.6′ XLR Cable

Manufacturer Part Number:NT1SIG
Read more
Compare
Quick View
Rode NT1 Signature Blue
Recording Microphones
₹17,999.00
High-class Condenser Versatility
The NT1 Signature Series microphone represents the pinnacle of Rode’s iconic NT1 design, thoughtfully constructed and reasonably priced to fit the likes of any level studio environment. Its traditional large-diaphragm cardioid design is a coveted quality among a range of musicians, vocalists, and content creators. Further, an emphasis on low noise guarantees solid, versatile performance on any project. Bass-heavy vocals and high-end instrument tones are no threat to the NT1’s wide 20Hz to 20kHz frequency range, ensuring crystalline occupancy over the entire audial spectrum. To top everything off, the NT1 Signature Series microphone includes an SM6 combination shockmount and pop filter, plus a 6-meter XLR cable for instant utility! If you’re looking for a reliable, time-trusted microphone option at a fantastic price, look no further than the NT1 Signature Series microphone from Rode.
Proprietary NT1 signal delivery

Recording pros were happy to discover that Rode took no shortcuts when designing the NT1 Signature Series condenser microphone. A familiar 1-inch large-diaphragm HF6 condenser capsule with a cardioid polar pattern ensures the rich tonal qualities expected of a traditional NT1 microphone. Moreover, 4dBA of A-weighted equivalent noise means you’ll have little to no interruptions in any signal path, keeping your recordings clear and consistent in any studio environment. A 20Hz to 20kHz frequency range and high SPL handling top off the NT1 Signature Series’ sound construction to present wide-reaching audio capture with an extremely dynamic range. If you’re familiar with Rode’s iconic NT1 sound, you’ll be right at home with an NT1 Signature Series microphone in your setup.

Bundled with the SM6 shockmount and pop screen

Rode wasn’t content to supply the NT1 with any ordinary shockmount. That’s why they came up with the SM6 combination shockmount and pop screen. The entire frame of the SM6 is made from an engineering-grade polymer, which provides excellent stability without much added weight. That makes the NT1 incredibly easy to use with any ordinary microphone stand in your studio. A dual Lyre suspension system offers superior resistance to vibration with none of the drawbacks of conventional rubber-band shockmounts. The SM6’s clamp is robust and easy to operate, and the pop filter offers excellent plosive protection.

Rode NT1 Features:

A signature take on Rode’s compellingly popular NT1 condenser microphone model

Large-diaphragm HF6 1-in. condenser capsule with cardioid polar pattern — perfect for vocal and instrument recording, podcasts, streaming, and more

Extended 20Hz–20kHz frequency range ensures a superior, balanced signal on all ends

Low-noise (4dBA) capture for record-breaking condenser clarity

Ultra-high SPL handling accommodates tracking at all dynamics

Industry-standard 3-pin XLR output connection

Included combination shockmount and pop filter for instant integration into your recording setup

Premium scratch-resistant finish

Tech Specs

Microphone Type:Condenser

Polar Pattern:Cardioid

Diaphragm Size:1″ (25mm)

Frequency Response:20Hz-20kHz

Max SPL:142dB SPL

Output Impedance:100 ohms

Sensitivity:-32dBV/Pa

Self Noise:4dB (A weighted)

Connector:XLR

Color:Blue

Power Source:48V phantom power

Dimensions:7.44″ x 1.96″ x 1.96″

Weight:1 lbs.

Included Accessories:1 x SM6 Shockmount with Pop Filter, 1 x 19.6′ XLR Cable

Manufacturer Part Number:NT1SIG-B
Add to cart
Compare
Quick View
Rode NT1 Signature Green
Recording Microphones
₹17,999.00
High-class Condenser Versatility
The NT1 Signature Series microphone represents the pinnacle of Rode’s iconic NT1 design, thoughtfully constructed and reasonably priced to fit the likes of any level studio environment. Its traditional large-diaphragm cardioid design is a coveted quality among a range of musicians, vocalists, and content creators. Further, an emphasis on low noise guarantees solid, versatile performance on any project. Bass-heavy vocals and high-end instrument tones are no threat to the NT1’s wide 20Hz to 20kHz frequency range, ensuring crystalline occupancy over the entire audial spectrum. To top everything off, the NT1 Signature Series microphone includes an SM6 combination shockmount and pop filter, plus a 6-meter XLR cable for instant utility! If you’re looking for a reliable, time-trusted microphone option at a fantastic price, look no further than the NT1 Signature Series microphone from Rode.
Proprietary NT1 signal delivery

Recording pros were happy to discover that Rode took no shortcuts when designing the NT1 Signature Series condenser microphone. A familiar 1-inch large-diaphragm HF6 condenser capsule with a cardioid polar pattern ensures the rich tonal qualities expected of a traditional NT1 microphone. Moreover, 4dBA of A-weighted equivalent noise means you’ll have little to no interruptions in any signal path, keeping your recordings clear and consistent in any studio environment. A 20Hz to 20kHz frequency range and high SPL handling top off the NT1 Signature Series’ sound construction to present wide-reaching audio capture with an extremely dynamic range. If you’re familiar with Rode’s iconic NT1 sound, you’ll be right at home with an NT1 Signature Series microphone in your setup.

Bundled with the SM6 shockmount and pop screen

Rode wasn’t content to supply the NT1 with any ordinary shockmount. That’s why they came up with the SM6 combination shockmount and pop screen. The entire frame of the SM6 is made from an engineering-grade polymer, which provides excellent stability without much added weight. That makes the NT1 incredibly easy to use with any ordinary microphone stand in your studio. A dual Lyre suspension system offers superior resistance to vibration with none of the drawbacks of conventional rubber-band shockmounts. The SM6’s clamp is robust and easy to operate, and the pop filter offers excellent plosive protection.

Rode NT1 Features:

A signature take on Rode’s compellingly popular NT1 condenser microphone model

Large-diaphragm HF6 1-in. condenser capsule with cardioid polar pattern — perfect for vocal and instrument recording, podcasts, streaming, and more

Extended 20Hz–20kHz frequency range ensures a superior, balanced signal on all ends

Low-noise (4dBA) capture for record-breaking condenser clarity

Ultra-high SPL handling accommodates tracking at all dynamics

Industry-standard 3-pin XLR output connection

Included combination shockmount and pop filter for instant integration into your recording setup

Premium scratch-resistant finish

Tech Specs

Microphone Type:Condenser

Polar Pattern:Cardioid

Diaphragm Size:1″

Frequency Response:20Hz-20kHz

Max SPL:142dB SPL

Output Impedance:100 ohms

Sensitivity:-32dBV/Pa

Self Noise:4dB (A weighted)

Connector:XLR

Color:Green

Power Source:48V phantom power

Dimensions:7.44″ x 1.96″ x 1.96″

Weight:1 lbs.

Included Accessories:1 x SM6 Shockmount with Pop Filter, 1 x 19.6′ XLR Cable

Manufacturer Part Number:NT1SIG-G
Add to cart