Shop

Showing 49–60 of 934 results

Compare
Quick View
Behringer CT100 Cable Tester
Installed Sound & Others
₹3,799.00
Check Your Cables!
Make sure your gear is ready to go with the Behringer Cable Tester CT100. Bad cables can instantly ruin your gig or session. The CT100 cable tester is the perfect, and inexpensive, way to find bad cables fast. This compact unit tests the most common audio cables including XLR, TRS, MIDI, and more. You even get to choose from three testing modes. We know that keeping your studio or live rig running in top shape is important to you, and we’re confident that the Behringer Cable Tester CT100 can help make that a reality.

Behringer Cable Tester CT100 Features:
- Easy-to-use cable tester for common audio cables
- Tests XLR, 1/4″ TRS, 1/8″ TRS, TT TRS, RCA, and MIDI cables
- Microprocessor-controlled modes include Cable Test, Installed Cable Test, and Tone
- Runs on 2 AA batteries
- Includes belt clip for busy roadies and techs
- Performs continuity check, intermittent contact check, phantom power, and ground shield check
Test your cables quickly and accurately with the Behringer Cable Tester CT100!
Read more
Compare
Quick View
Behringer CT200 Cable Tester
Installed Sound & Others
₹5,799.00
Take the Guesswork Out of Cable Testing
Behringer’s CT200 cable tester is an absolute must-have in your studio or live-sound toolbox. This super-affordable 8-in-1 cable tester lets you diagnose common problems in a wide range of cable types. On the audio side, the CT200 lets you check for faults and shorts in cables with XLR, speakON, 1/4″ and 1/8″ TRS, and RCA connectors. Techs also appreciate the way it lets you quickly sort out issues with RJ45 Ethernet cables, MIDI cables, and USB cables. What’s more, it even works on installed cables, and an onboard test tone lets you quickly check if signal is passing through clearly.
Behringer CT200 Cable Tester Features:

A quality cable tester for your studio or live toolbox

Checks XLR, speakON, 1/4″ and 1/8″ TRS, and RCA audio cables

Includes phantom power and ground shield diagnosis

Tests RJ45 (Ethernet), MIDI, and USB data cables for continuity

Intuitive LED display makes operation easy

Test-tone generator for 1kHz or 440Hz at +4dBu, -10dBV or -50dBV

Tests loose cables and installed cables

Runs on just 2 AA batteries

Note: This unit works with TS cables, but will show a Pin 1-3 short, due to TS cables not having a pin 3 ring.
Tech Specs
- Type:Crossed, shorted, open, intermittent
- Compatibility:XLR, SpeakON, 1/4″, 1/8″, RJ45, MIDI, USB
- Power Source:2 x AA Batteries
Read more
Compare
Quick View
Behringer DS2800 Distribution Splitter
Installed Sound & Others
₹12,790.00
Feature-packed, Affordable 8-channel Audio Splitter
For your studio, restaurant, or other commercial sound application, audio engineers know that distribution is simply a must-have functionality. With a capable splitter, you can send audio to multiple locations and control the amplitude of the signal from a central device. The Behringer DS2800 Professional 2-Input 8-Output Distribution Splitter is a well-priced but highly functional audio splitter that employs ultra-low-noise servo-balanced line level inputs for a clean, clear audio path. The DS2800’s rear-panel Mode button lets you choose one or two channels of input and send those channels in up to eight directions (one in/eight out or two in/four out). You also get separate A and B link output connectors for daisy-chaining multiple DS2800 units or sending your input signal on to a FOH mixer or another distribution point. Each channel has a corresponding front-panel rotary Level control and a 5-segment LED meter that brightly indicates signal activity, so you’ll always have precise control over channel amplitudes. Plus, all the XLR input/output connectors are gold-plated for the ultimate in signal transmission clarity and integrity.
Behringer Professional 2-Input 8-Output Distribution Splitter Features:

Pro-grade audio splitter distributes 1 or 2 audio sources in up to 8 directions

Choose between 1-in/8-out or 2-in/4-out for mono or stereo operation

Front-panel rotary Level control and 5-segment LED activity meter for each channel

Servo-balanced inputs and outputs with low-noise op amps for exceptionally clear audio

Link A and Link B separate outputs for daisy-chaining units

All XLR input/output connectors are gold-plated for exceptional signal clarity

Designed and engineered with German precision for superior functionality and performance

Tech Specs

Type:Active Line Splitter

Channels:8

Inputs:2 x XLR (input A/B)

Outputs:8 x XLR (channel out), 2 x XLR (link A/B)

Power Source:Standard IEC AC cable

Width:19″
Add to cart
Compare
Quick View
Behringer Eurolive B105D Powered Monitor Speaker
Powered Speakers
₹14,999.00
Perfectly Portable Personal Powered Monitor

The Behringer Eurolive B105D 50W Powered Monitor is a multi-purpose, active monitor that vocalists will love. This ultra-compact speaker can be used for a wide variety of applications, including vocal performance, keyboard monitoring, and small-scale public addresses. The B105D was built with a Class D power section that gives the driver tons of power without losing any definition. It’s loaded with two preamps for condenser microphones and one instrument-ready input. Complete with a built-in MP3 player and Bluetooth audio streaming, you can keep the party going even when you need to slip away from the stage. Whether you’re belting out tunes or reading a public address, the Behringer B105D Powered Monitor has you covered.
Inputs that are ready for anything

The Behringer Eurolive B105D has input options to fit almost any performer. The monitor is loaded with three combination XLR/TRS inputs and a 3-channel mixer. Two of the inputs are equipped with Behringer’s “Invisible” mic preamps that provide crystal clear vocal reproduction. The Line 2 input is instrument-ready, so you don’t have to bring a DI to hear your keyboard or guitar in the monitor. Audio professionals appreciate that the B105D has an integrated limiter that protects the driver and internal components. Once you have all your instruments and mics connected, simply tweak the 3-band EQ to your liking.

Keep the vibe going with Bluetooth playback and built-in MP3 player

For solo performers who prefer the fuller sound that a backing track gives them, the B150D is a great option. This monitor is Bluetooth-enabled, so you can stream music from your smartphone or tablet instantaneously. If using Bluetooth isn’t your forte, the B105D has you covered. The front panel of the monitor has a convenient USB input and an integrated MP3 player. Simply load up the songs into a flash drive, plug it into the monitor, and you’re ready to go. The B105D also has a dedicated stereo 3.5mm input for use with MP3 players, keyboards, or a CD player — if you’re into that sort of thing.

Mount it your way

The Behringer Eurolive B105D is equally at home sitting on the stage or mounted on a mic stand. If you have a tough time hearing your floor monitors, you’ll love the extra freedom that mic stand mounting gives you. Just secure the B105D to your mic stand, adjust to the perfect position, and get playing!

Behringer Eurolive B105D Powered Monitor Features:

Perfect for vocalists, keyboardists, and public speakers

Lightweight design makes transport and setup a breeze

3-band EQ lets you shape your sound to fit the venue

Mic stand mountable design enables even more convenient placement

Bluetooth connectivity lets you stream audio right from your smart device

Combo mic/line inputs give you greater connectivity options

USB input provides quick and easy MP3 playback

Tech Specs

Type:Personal Monitor Speaker

Powered:Yes

Power Configuration:Single Amp

Speaker Size:5″ Full Range

Total Power:50W Class D

Inputs:2 x XLR-1/4″ combo (mic/line), 1 x XLR-1/4″ combo (line), 1 x 1/8″ TRS (stereo)

Outputs:1 x XLR (thru)

USB:1 x Type A

Bluetooth:Yes

Frequency Response:80 Hz to 18 kHz (-10 dB)

Maximum Peak SPL:95 dB SPL @ 1m

Mounting Options:Pole Mount, Desktop

Power Source:Standard IEC AC power cable

Height:8.25″

Width:11.2″

Depth:6.9″

Weight:6.7 lbs.

Manufacturer Part Number:000-E2W02-00010
Add to cart
Compare
Quick View
Behringer Europort EPS500MP3 Portable PA System
Portable PA Systems
₹63,000.00
Amazing Sound Anywhere You Need it!
The Behringer Europort EPS500MP3 portable PA system lets you turn any midsize room into an auditorium, by putting all of your basic sound-reinforcement needs into a single ready-to-go rig. At the center of the EPS500MP3 there’s a rock-solid 8-channel powered mixer with four Xenyx preamps and refreshingly comprehensive setup options. Dual 250-watt amplifiers provide perfect power for the system’s 8″ loudspeakers, which come specially designed to house the mixer as well as cables and microphones. Wherever you need it, the Behringer Europort EPS500MP3 portable PA system has your PA needs covered.
Behringer Europort EPS500MP3 Portable PA System at a Glance:

Your complete PA system bundled in a convenient grab-and-go format

Fully loaded 8-channel mixer includes all of the bells and whistles you want

No music player? No problem! Onboard MP3 playback lets you get the party started

Your complete PA system bundled in a convenient grab-and-go formatIt’s all there, mixer, amps, speakers, effects, music player, you name it – it’s all part of the delightfully easy-to-use and super-portable Behringer Europort EPS500MP3 PA system. The mixer itself locks into place on the back of one of the speakers (though you can detach it if you like easily enough), and the rest of the accessories fit in a compartment on the back of the other speaker housing. There are even standard 1.378″ (35mm) pole sockets on the bottom of the EPS500MP3’s speakers, providing you with even more setup flexibility.

Fully loaded 8-channel mixer includes all of the bells and whistles you wantLoaded with a 4-pack of Behringer’s excellent Xenyx microphone preamplifiers, the Europort EPS500MP3 PA system’s mixer is already off to a good start, before you start digging in. Thanks to its comprehensive I/O, you can certainly plug in more than just microphones too. In fact, there’s even a special connection for a Behringer ULM system, so adding a wireless microphone to your rig is child’s play. And thanks to the onboard digital reverb, you can easily add extra depth to your sound with the EPS500MP3’s mixer.

No music player? No problem! Onboard MP3 playback lets you get the party startedAnd now for the icing on the cake: the Europort EPS500MP3 PA system’s handy onboard MP3 player. Just stick in an standard USB thumb drive loaded with MP3s, and you’re ready to get the party started with the push of a button. That’s not all – the EPS500MP3 also features Behringer’s Voice-Over-Priority function, which will automatically lower the stereo channel volume when it detects mic signal, allowing you to effortlessly speak over the music, without reaching for the controls.

Behringer Europort EPS500MP3 Portable PA System Features:

Ultra-compact 8-channel PA system with custom matched speakers and 500-watt, stereo powered mixer

Provides a ton of flexibility and excellent sound quality in a lightweight and easy-to-use package

Power amplifier section can detach from its speaker for easy positioning and access

Speaker cabinets feature 8″ woofers, 1″ tweeters, and standard 1.378″ (35mm) pole mounts

4 x Xenyx microphone preamps offer switchable +48V phantom power

Simple and convenient 2-band EQ available on all channels

Onboard MP3 player lets you play audio files from any class-compliant USB drive

Dial in added depth and dimension with onboard stereo reverb

Voice-Over-Priority Function ducks music when microphone signal is detected

Wireless-ready design accommodates Behringer ULM wireless mic systems

Auto limiter prevents overload damage to power amplifier and speakers

Storage compartment available for microphone, cables, and accessories

2 x 20′ speaker cables included

Pick up a Behringer Europort EPS500MP3 for all of your portable PA needs!
Add to cart
Compare
Quick View
Behringer Europower PMP500 Powered Analog Mixing Console
Analog Mixing Consoles
₹43,999.00
A Powerful Mixer, With Effects!

You’re ready to run the show with the Behringer Europower PMP500 powered mixer with effects. This stereo 500 watt powered mixer gives you 6 channels with mic pres and mono line inputs, plus four more stereo line input channels. The built-in FX processor gives you 25 effects presets including delays, reverbs, chorus, and more. We’ve seen a lot of powered mixers, and we’re impressed with the PMP500’s feature set – in addition to the effects you also get a 3-band EQ on each channel, and a 7-band graphic EQ with FBQ feedback detection. If you want a powered mixer that makes a sonic impact, check out the Behringer PMP500 powered mixer with effects.

Behringer Europower PMP500 Powered Mixer at a Glance:

Sound your best with built-in FX

Lightweight and efficient Class D amplifier technology

Graphic EQ with feedback detection

Sound your best with built-in FXThe PMP500 sports a built-in FX processor featuring 25 effects presets. You get a whole slew of delays, reverbs, modulations, pitch-shifters, and multi-FX to spice up your sound. Add a hint of reverb and delay to vocals, or a lush chorus to your acoustic guitar. The PMP500’s 24-bit digital effects add a professional touch to any performance.

Lightweight and efficient Class D amplifier technologyThanks to the revolutionary Class D technology with “near-zero” thermal buildup, the lightweight PMP500 runs very cool, no more massive heat sinks or toroid transformers. We’ve been impressed with the punch and clarity of this Class D power amp, and we’re sure your band will be too.

Graphic EQ with Feedback DetectionThe 7-band graphic EQ on the PMP500 features Behringer’s FBQ feedback detection system to help you sound your best. When feedback occurs, LEDs on the EQ sliders light up – just turn down the slider with the brightest LED, and you’ve turned down the offending frequency. It’s a great problem solver if you have to mix and perform at the same time, taking the guesswork out of eliminating feedback.

Behringer Europower PMP500 Powered Mixer Features:

12-channel powered mixer with EQ, effects, and FBQ feedback detection

Built-in FX processor adds some sparkle to your live sound

Up to 500 peak watts to power your speakers

Can be expanded for wireless mic operation with the Ultralinnk ULM100USB system (sold separately)

Fader control over all channels and outputs

The Behringer Europower PMP500 is a powerful performer!
Add to cart
Compare
Quick View
Behringer Europower PMP500MP3 Powered Analog Mixing Console
Analog Mixing Consoles
₹30,999.00
Value-loaded, Compact Powered Mixer

Although it weighs a mere 6.6 pounds, the Behringer Europower PMP500MP3 is enormous — power- and performance-wise, that is. This lightweight, 500-watt, 8-channel powered mixer is simply a great all-in-one solution. It boasts four high-quality preamps with +48V phantom power, a musical 2-band EQ on each channel, and a Voice-Over-Priority function for broadcast-style ducking. The PMP500MP3 delivers optimal sound with minimal effort, thanks to a system-wide Music/Speech EQ switch. This value-laden live sound mixer also includes a built-in MP3 player and a studio-class stereo reverb. Compatibility with Behringer’s Ultralink ULM wireless systems, an integrated mic stand adapter, and flexible switching power supply round out the Europower PMP500MP3’s robust features.
Packed with Behringer’s best features

Achieving outstanding sound is no problem for the Europower PMP500MP3. This 8-channel powered mixer includes four of Behringer’s clean-sounding XENYX mic preamps, which include +48V phantom power for your condenser microphones, and two stereo channels. Each channel has a dedicated 2-band EQ for sound shaping. You also get a global Music/Speech switch to tailor the mixer’s overall EQ to your application, plus a broadcast-style Voice-Over-Priority function that automatically lowers the stereo channels when there’s a mic signal present. A studio-style digital reverb puts the final polish on your sound.

Convenient built-in MP3 player

The Behringer Europower PMP500MP3 features a built-in MP3 player — something that we appreciate here. This feature permits you to plug a music-loaded USB thumb drive into the PMP500MP3, then play it back with the mixer’s Random, Play/Pause, Rewind, and Forward buttons. Thanks to this convenient feature, you’ll be able to use the PMP500MP3 to deliver break and background music, karaoke performance tracks, and more.

Behringer Europower PMP500MP3 Features:

500W of stereo output ensures room-filling, class-leading sound

8 channels (4 mono/2 stereo) with 4 XENYX preamps and +48V phantom power

2-band EQ on each channel provides musical sound shaping

System-wide Music/Speech EQ switch tailors the overall EQ to your application

Voice-Over-Priority function for broadcast-style ducking

Built-in MP3 player plays audio files back via a USB thumb drive

Studio-class stereo reverb puts the final polish on your sound

Compatible with Behringer’s Ultralink ULM wireless systems (sold separately)

Integrated mic stand adapter fits standard 5/8-inch and 3/8-inch threads

Auto limiter function safeguards against excessive levels

Flexible switching power supply yields low-noise audio, superior transient response, and excellent energy savings
Add to cart
Compare
Quick View
Behringer FBQ1000 Feedback Destroyer
Installed Sound & Others
₹20,599.00
Destroyer of Feedback

The Behringer FBQ1000 Feedback Destroyer is the fastest feedback suppressor on the market. With its lightning-quick feedback detection, the FBQ1000 will safeguard you and your audiences from feedback. The “search-and-destroy” algorithm automatically pinpoints up to 24 feedback frequencies per channel, then sets ultra-narrow notch filters to knock out feedback frequencies – leaving the rest of your signal untouched. Auto Mode continuously monitors the mix, resetting programmed filters automatically, while the Manual Mode lets you tweak up to 24 parametric filters for frequency, bandwidth and gain. Exterminate feedback effortlessly with the Behringer FBQ1000 Feedback Destroyer .
Behringer FBQ1000 Feedback Destroyer at a Glance:

Intelligent feedback suppression

Easy to operate

Always be prepared

Intelligent feedback suppressionWith its ultra-speedy feedback-detection algorithm, the Behringer FBQ1000 Feedback Destroyer automatically and intelligently identifies up to 24 feedback frequencies per channel. The algorithm will then set very narrow notch filters – up to 1/60th of an octave – to “take out” feedback frequencies – leaving the remainder of your signal virtually untouched. Using the default Auto setting, plus the Panic button, you can have the FBQ1000 up and running in seconds.

Easy to operateThe Behringer FBQ1000 Feedback Destroyer ‘s Auto Mode continuously monitors your mix, resetting filters automatically, while Manual Mode allows individual frequency, bandwidth and gain tweakage of up to 24 fully-parametric filters. Open MIDI architecture makes future firmware updates and flexible communication with other gear dead simple.

Always be preparedWith the Behringer FBQ1000 Feedback Destroyer ‘s various modes, you can ace just about any live sound challenge – or use the FBQ1000 as a creative sound-shapinger. A single FBQ1000 can protect you from feedback in both your mono PA mains as well as your monitor mix. In the fight against feedback, the FBQ1000 Behringer Feedback Destroyer is your knight in shining armor.

Behringer FBQ1000 Feedback Destroyer Features:

Automatic and Ultra-Fast Feedback Destroyer/Parametric EQ with 24 FBQ Filters

Ultra-high performance 2-channel Feedback Destroyer and Parametric EQ

24-bit Sigma-Delta converter, 64/128-times oversampling

Automatically and “intelligently” locates and destroys up to 40 feedback frequencies

Ultra-narrow FBQ filters for extremely effective feedback suppression, while retaining sonic quality

Set-and-forget default setting enables immediate and super-easy Feedback Destroyer performance

Auto mode continuously monitors the mix and automatically sets filters

Single-shot mode automatically detects and destroys feedback and locks filters until manual reset

Extensive MIDI implementation and user preset memories for instant program recalls

Balanced inputs and servo-balanced outputs with 1/4″ TRS and gold-plated XLR connectors

High-quality components and exceptionally rugged construction ensure long life

Exterminate feedback with the Behringer FBQ1000 Feedback Destroyer !
Read more
Compare
Quick View
Behringer FLOW 8 Bluetooth Controlled Digital Mixer
Digital Mixing Consoles
₹24,999.00
Get into the FLOW with this User-friendly Digital Mixer

The Behringer FLOW 8 8-input digital mixer provides an easy-to-use interface, automatic preamps, and an intuitive stage view to help you nail a mix in no time flat. This compact digital mixer allows remote mixing through the FLOW app, which also offers mix assistance and total recall of all settings via remote snapshots. Store as many as you want to expedite your mix in any situation! Packed with studio-quality Midas preamps and X32 digital converters, the Behringer FLOW 8 exhibits professional sonic performance. It also doubles as a 10 x 2 channel USB audio interface for capturing live performances, cutting tracks in your home studio, or hosting a podcast. Gigging artists appreciate the FLOW 8’s Bluetooth connectivity for streaming backing tracks and playing music during set breaks. With the Behringer FLOW 8, you don’t need to be a professional live sound engineer or break your gear budget to get a great mix!
Assisted setup and EZ-Gain gain staging

If you’re unexperienced with audio, running a digital mixer can be a daunting task. You have to know the right input to use for a source, how to set compressors and tweak EQs, and understand sometimes complex signal routing. But FLOW 8 flattens the learning curve by providing assisted setup with the FLOW 8 app. This setup wizard guides you, step by step, on how to set up a mix. Just select the source you want to work with, and the FLOW 8 app will walk you through the rest. Once you’ve got all of your mics and instruments connected, FLOW 8’s EZ-Gain feature will help you set the ideal channel gain by automatically adjusting to the input level of the source signal, keeping noise low and preventing clipping.

Studio-quality preamps, converters, and effects

With FLOW 8, Behringer delivers an affordable and powerful digital mixer with outsized sonic performance. It shares the same high-quality converters and 32 VFP-Processing found on Behringer’s popular X32, X-Air, and WING series of digital mixers, and it’s loaded with two studio-grade Midas microphone preamps, which are known for their uncolored, transparent sound. Each channel comes equipped with a 4-band EQ, easy-to-use compressor, and two effects sends for blending effects such as delay and reverb. Speaking of which, FLOW 8 boasts no less than 12 reverb programs, on top of numerous delays and modulation effects.

Bluetooth remote control with the FLOW app

Behringer’s FLOW 8 digital mixer has intuitive physical controls, including faders, encoders, and a large master volume knob, if you want to run a quick mix right from the front panel. But if you want to dig deeper, launch the FLOW app from any iOS/Android device. Not only does the app provide remote control of FLOW 8 via Bluetooth, but it also gives you access to FLOW 8’s assistance features and lets you save and load unlimited snapshots of your favorite mixer settings.

Built-in USB audio interface

Doubling as a multichannel USB audio interface, the FLOW 8 is just at home in the studio as it is onstage. Whether you’re livestreaming, podcasting, or recording music, FLOW 8 is an excellent studio partner. It features zero-latency monitoring and works with any DAW. It’s also brilliant for recording gigs and capturing live in-studio performances.

Behringer FLOW 8 Digital Mixer Features:

Ultra-low noise, high headroom digital mixer with wireless remote control

FLOW app for Bluetooth remote control from iOS/Android mobile phones or tablets

60mm channel faders and master rotary control with LED collar

EZ-Gain function analyzes the signals in your application and automatically sets the gain for optimum headroom

2 Midas microphone preamps with 48V phantom power and programmable gain

2 additional mic/line inputs on combo XLR/TRS jacks

2 pairs of balanced stereo line inputs, each featuring a hi-Z jack for direct connection of guitar/bass

All channels with 4-band EQ and compressor, 2 FX, and 2 monitor sends

Monitor and main buses feature 9-band EQ and limiter

2 independent studio-grade effects engines — each with 16 presets, including reverbs, delay, and modulation effects

Built-in 10 x 2 channel USB computer audio interface, with 48 kHz/24-bit resolution

Bluetooth audio streaming for adding click or backing tracks to your performance, or for playing music during a break

Balanced main outputs on gold-plated XLR and balanced monitor outputs on 1/4-inch TRS

FLOW app with assisted setup, unlimited mixer snapshots and intuitive, customizable Stage-View

FX adjustment control, FX mute, and tap tempo buttons

Footswitch input for controlling FX mute/tap tempo or  preset up/down functions

Optional mic stand adapter allows placing the mixer within reach of your performance (FLOW CLIP or P16-MB not included)

USB powered via AC adapter (included) or power bank (not included)

Tech Specs

Type:Digital Mixer

Channels:8

Inputs – Mic Preamps:2 x XLR, 2 x XLR-1/4″ combo

Phantom Power:2 channels

Inputs – Line:2 x 1/4″ TRS (stereo/mono)

Inputs – Other:2 x 1/4″ TRS (Hi-Z)

Outputs – Main:2 x XLR (L/R), 2 x 1/4″ TRS (monitor)

Aux Sends:2 x FX Sends, 2 x Monitor Sends

Remote:1 x 1/4″ (footswitch)

USB:1 x Type B (audio), 1 x Type Micro-B (power)

Computer Connectivity:USB (10 x 2)

Bluetooth:v4.0

Headphones:1 x 1/4″

Faders:6 x 60mm

A/D Resolution:24-bit/48kHz

EQ Bands:4-band EQ (channel), 9-band EQ (main/monitor)

Effects:2 x FX Engines, 16 x FX Presets, 12 x Reverbs

Signal Processing:Compression, Limiter

Software:FLOW 8 Remote App (Android/iOS)

Power Source:USB bus powered

Height:1.9″

Depth:6.8″

Width:9.0″

Weight:3.1 lbs.
Add to cart
Compare
Quick View
Behringer KM750 Power Amplifier
Amplifiers
₹29,999.00
This Lightweight Power Amp Really Packs a Punch
The Behringer KM750 750-watt stereo power amplifier combines ample power with efficient performance. Behringer’s Accelerated Transient Response design coordinates your speakers with the speed of the signals that are passing through them, ensuring a tight and punchy sound. Easy-to-use front panel controls and LED indicators make operating the KM750 child’s play. The XLR, 1/4″, and RCA input connectors on the KM750’s rear panel accommodate nearly any source. Connect your speakers securely to the KM750’s dual locking connectors or touch-proof binding posts. A built-in limiter ensures maximum output with reliable overload protection. The Behringer KM750 is a workhorse 750-watt stereo power amplifier.
Behringer KM750 750-watt Stereo Power Amplifier at a Glance:

Accelerated Transient Response ensures a tight and punchy sound

Streamlined controls for simple operation

Broad connectivity accommodates nearly any source

Accelerated Transient Response ensures a tight and punchy soundThe Behringer KM750’s Accelerated Transient Response design employs transistors with high slew rates and a high-current toroidal transformer to coordinate your audio with your speakers. This ultra-fast transient response ensures that every beat of your music comes through loud and clear, with maximum punch and clarity. Rail tracking effectively modulates the KM750’s power supply rails with only the peaks of the input signal, giving rise to efficient performance with low signal distortion.

Streamlined controls for simple operationUsing the Behringer KM750 is dead simple. Push the Power button, and an LED shows you that the unit is on. A pair of positive-dent Gain controls with signal LEDs provides you with an at-a-glance view of your levels. A Mode switch selects between mono, stereo, and bridge modes. A Limiter switch turns the KM750’s overload protection on and off. You also get Ground-lift and Sensitivity switches.

Broad connectivity accommodates nearly any sourceTo provide you with near-universal compatibility, the Behringer KM750 is loaded with XLR, 1/4″, and RCA input connectors. Dual locking connectors or touch-proof binding posts create a secure connection for your speakers. We’re impressed by the excellent compatibility of the KM750 here.

Behringer KM750 750-watt Stereo Power Amplifier Features:

750W 2-channel power amplifier (into 8 ohms in bridge mode)

Accelerated Transient Response design and high-current toroidal transformer deliver maximum punch and clarity

Easy-to-use front panel controls and LED indicators for easy operation

XLR, 1/4″, and RCA input connectors accommodate nearly any source

Connect your speakers securely via dual locking connectors or touch-proof binding posts

Switchable limiter yields maximum output with reliable overload protection

Independent DC and short circuit protection on each channel protects your amplifier and speakers

Active cooling on heat sink prevents overheating

Lightweight yet durable all-steel chassis

The Behringer KM750 750-watt stereo power amplifier is a workhorse.
Tech Specs
- Number of Channels:2
- Power Class:Class AB
- Watts/Side @ 8 ohms:200W
- Watts/Side @ 4 ohms:400W
- Watts Bridged:750W @ 8 ohms
- Inputs:2 x 1/4″, 2 x XLR, 2 x stereo RCA
- Outputs:2 x Binding Posts, 2 x speakON
- Overload Protection:Independent DC and short circuit protection
- Rack Spaces:2U
- Height:3.5″
- Depth:12.5″
- Width:19″
- Weight:18.7 lbs.
Add to cart
Compare
Quick View
Behringer Monitor Speakers 1C-BK
Installed Sound & Others
₹12,799.00
Ultra-compact Monitor Speakers

Behringer 1C-BK passive monitor speakers merge stunningly accurate sound with stylish, neo-classic design. Ideal for fixed installation in home theaters, restaurants, and multimedia production suites, 1C-BK speakers produce a massive sound, despite their compact, easily concealed size. Built with high-precision components, these speakers’ stellar power handling capabilities deliver a full-range output with extremely low distortion. Whether you place them in bookshelves, on desktops, or hang them from the rafters, Behringer 1C-BK passive monitor speakers won’t disappoint.

Behringer 1C-BK Passive Monitor Speakers at a Glance:
High-precision components deliver incredible sound quality

Behringer – a brief history

High-precision components deliver incredible sound quality
1C-BK passive monitor speakers derive their massive sound from powerful 5.5″ cellulose cone woofers and high-resolution 0.5″ tweeters. Built with high-precision components, these speakers exhibit absolute phase linearity, delivering exceptionally clear sound reproduction and excellent frequency response from 60Hz all the way up to 23kHz. On top of that, you won’t have to worry about blowing the 1C-BK’s tweeters, thanks to the auto-overload protection that’s built into these speakers’ low-distortion, phase-optimized crossovers. In other words, these little guys sound great!

Behringer – a brief history
Uli Behringer showed an interest in music technology design at a young age, building his own synthesizer by the age of 16. In 1982, Uli began studying sound engineering and classical piano at the Robert Schumann Conservatory in Dusseldorf, Germany. Uli’s defining moment came when he was repairing a signal processor made by a high-end manufacturer. Despite the processor’s expensive price tag, Uli realized that its internal components could be bought for a fraction of the cost. Being a strapped-for-cash student, Uli began building his own signal processors. Before he knew it, other students began requesting equipment from him. In 1989, after being bombarded with more orders than he could handle by himself, Uli created Behringer, Inc.

Behringer 1C-BK Passive Monitor Speakers Features:

Ultra-linear design delivers exceptionally clear sound reproduction and excellent frequency response

High power handling capabilities provide full-range output with extremely low distortion

Phase-optimized and high-precision crossovers for absolute phase linearity

Auto-overload protection prevents tweeter damage and resets automatically

Solid protective grills and exceptionally rugged construction for long life and durability

Brackets for wall/ceiling mounting are included

For stunningly accurate sound and stylish, neo-classic design, look to Behringer 1C-BK passive monitor speakers!
Tech Specs
- Powered:No
- LF Driver Size:1 x 5.5″
- HF Driver Size:0.5″
- Peak Power Capacity:100W
- Impedance:4 ohms
- Frequency Range:60Hz-23kHz (-10dB)
- Crossover Frequency:5kHz
- Maximum Peak SPL:112dB
Add to cart
Compare
Quick View
Behringer MS16 Active Personal Monitor Speakers
Studio Monitors
₹13,799.00
Multimedia Monitors That Won’t Break the Bank
The Behringer MS16 is a compact 2-way stereo speaker system for home studio or multimedia applications. Eight watts drive the MS16’s 4″ woofer and high-resolution tweeter, while a front-mounted volume control and individual bass and treble controls make accurate sound adjustments a breeze. Two stereo line inputs (RCA and 1/8 TRS) allow simultaneous use of two stereo sources, so you can play back CDs, MDs or MP3s and use an electric guitar/keyboard at the same time. In addition, the TRS microphone input lets you mix vocals with a stereo track. Magnetic shielding and compact size make the Behringer MS16 ideal for placement near video monitors or computer displays.

Behringer MS16 2-Way Powered Monitors (pair) Features at a Glance:

4″ woofers and high-resolution tweeters

Each speaker is driven by an 8W amplifier

Dedicated volume, bass and treble controls for more flexibility

Stereo RCA inputs; 1/8″ TRS stereo input

Separately adjustable 1/4″ TRS microphone input mixable with stereo inputs

1/8″ TRS headphone connector with auto-mute loudspeaker function

Magnetically shielded for placement near computer monitors

Complete your setup with Behringer MS16 multimedia monitors!
Tech Specs
- Powered:Yes
- Power Configuration:Single Amp
- Quantity:Pair
- LF Driver Size:4″
- HF Driver Size:1.5″
- Total Power:8W
- Frequency Range:80Hz-20kHz
Add to cart