Showing 841–852 of 940 results
A member of the T Series, ADAM Audio’s affordable line of professional 2-way active studio monitors, the T7V features a 7″ polypropylene low-frequency driver that delivers bass extension down to an impressive 39Hz, while the company’s U-ART accelerated-ribbon tweeter provides pristine highs extended up to 25kHz – quite remarkable for a monitor in this price range. The tweeter’s broad, uniform dispersion pattern is assisted by a precision waveguide modeled on the High Frequency Propagation (HPS) waveguide used in ADAM’s premium S Series studio monitors, which provides an impressively wide sweet spot that liberates you from being constrained to a rigid listening position.
The T7V’s beveled cabinet features a rear-firing bass reflex port affixed to a thick metal backplate that houses the analog input connections and DSP-controlled driver crossovers and equalization. The woofer’s 50W Class D amplifier, in combination with the 20W Class D tweeter amp, enables a pair of T7Vs to achieve an impressive maximum SPL of 110dB at one meter. The T7V’s extended frequency response, robust dynamic range, exemplary transient response, broad sweet spot, and compact footprint make it ideally suited for use in small control rooms for music production, video post, and broadcast applications. It’s a perfect monitoring solution, considering the modest budgets that many facilities have to work with.
The drivers in ADAM Audio studio monitors benefit from years of in-house research and development and take advantage of the latest advances in technology and materials science. The woofer in the T7V is engineered to deliver optimized low-frequency reproduction with extended dynamic range and freedom from coloration. It incorporates a rigid, yet low-mass polypropylene driver cone; a highly efficient magnet assembly and precisely aligned voice coil; and an optimized driver chassis/basket design. The T7V’s 7″ woofer extends response down to 39Hz, making the speaker a suitable choice for nearfield monitoring in small control rooms, with or without a subwoofer. If more low-end extension is desirable, ADAM Audio’s Sub8 and Sub7 subwoofers pair perfectly with the T7V.
Instead of producing sound with a piston-like diaphragm like most loudspeakers, ADAM Audio’s U-ART accelerated-ribbon tweeter uses a pleated diaphragm that prevents distortion by moving air four times faster than the folds themselves are moving. Built to the tightest tolerances, the U-ART tweeter delivers ultra-low distortion and extends the frequency range up to 25kHz, enriching the soundfield with stunning detail and faithfully conveying every nuance of the source material so you can work over long periods without listening fatigue.
From its 1999 launch in Berlin, ADAM Audio has built a solid reputation among the pro audio cognoscente. We know that a superior speaker system has superior components, and this is one area where the company has a distinct edge. With years of R&D behind each proprietary driver, ADAM Audio’s custom driver technology expresses itself in breakthroughs such as their X-ART (eXtended Accelerating Ribbon Technology) tweeter, which is based on a groundbreaking 1960s invention, the Heil Air Motion Transformer — and in fact, was the main impetus for the formation of ADAM Audio. The X-ART tweeter became the key to ADAM’s signature transparent, high-definition sound; and the core development of ADAM’s proprietary designs going forward.
Embracing, exploiting, and working with modern materials has allowed ADAM Audio to formulate loudspeaker components that continually elevate the state of the art in studio monitor design. Materials such as rare-earth magnets and high-strength diaphragm foils have increased reliability, enhanced performance, and made possible new driver geometry. As compared with conventional driver technology, Adam drivers deliver optimized radiation characteristics, lower distortion, and higher efficiency. Along with installations in a growing number of top studios, ADAM Audio’s monitor range has garnered rave reviews from audio experts and recording engineers worldwide. If you’re considering an upgrade to world-class monitoring, you’ll be in good company with ADAM Audio monitors.
Are your attempts to get your signals to multiple places giving you a headache? The Behringer MX882 V2 splitter/mixer makes it easy. This splitter, line mixer, or level conditioner will let you send and receive signals any way you want. Each channel can operate independently in either splitter or mixer mode. Live sound engineers at Sweetwater also appreciate the ability to use the MX882 V2 as a 6-in/6-out level-matching amplifier or DI box too. When it comes to splitting and mixing signals, the Behringer MX882 V2 makes it simple.
The Behringer XENYX Q502USB mixer is made to handle live gigs, and provide you with the required tools necessary to capture professional-quality recordings. Along with its built-in USB/audio interface, and “one-knob” mono channel compressor, the XENYX Q1002USB mixer comes with enough recording and editing software to turn your computer into a complete recording studio. The smallest of the XENYX Q Series, the Q502USB is a 5-input, 2-bus mixer with a XENYX mic preamp and compressor, just the right size for smaller solo gigs. Thanks to onboard phantom power, Q502USB’s XENYX mic preamp can handle dynamic, as well as a studio-grade condenser mic. Elegant in its simplicity, the British-style, 2-band EQ provides warm and musical tone correction. The Q502USB also sports RCA CD/Tape I/O, handy for playing break music or for recording your set.
XENYX Mic Preamps
All XENYX mixers have one thing in common; great-sounding, high headroom XENYX mic preamps. XENYX preamps offer 130dB of dynamic range with a bandwidth that extends from below 10Hz to well above 200kHz. As a result, XENYX mixers can reproduce a cleaner, transparent performance.
British EQ
The British consoles of the 1960s and ˜70s changed the sound of rock and roll. Without them, the British Invasion might not have even happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The channel EQs on all XENYX mixers are based on that very same circuitry, allowing you to saturate signals with warmth and character. Even when applied generously, these equalizers exhibit forgiveness and superb audio quality.
USB Audio Interface
Modern technology has put personal recording well within the reach of virtually anyone with access to a computer. But how do you get all that music flying around your brain into a computer? Thanks to the built-in, bi-directional stereo USB audio interface, you can connect directly to your PC or Mac computer via a single USB cable. Now any signal source connected to the mixer can be recorded straight to your hard drive.
Included Software
Behringer has put together a massive software download that includes Audacity (the most popular open source audio editor), Podifier, Juice, Podnova and Golden Ear (a great selection of podcasting software). You’re ready to go live on your PC or Mac right out of the box! You also get more than 100 virtual instruments and 50 FX plug-ins, turning your computer into a complete home-based or mobile recording studio.
The Behringer XENYX Q802USB mixer is made to handle live gigs, and provide you with the required tools necessary to capture professional-quality recordings. Along with its built-in USB/audio interface, and “one-knob” mono channel compressor, the XENYX Q802USB mixer comes with enough recording and editing software to turn your computer into a complete recording studio. The second-most compact of the XENYX Q Series, the 8-input, 2-bus XENYX Q802USB has two phantom-powered XENYX mic preamps, making it possible to use up to two dynamic and/or studio-grade condenser mics. Onboard 3-band British EQ makes it easy to fine-tune any input signal and is available on both the mic and stereo channels. Another feature exclusive to the Q802USB is an FX Send control per channel, allowing you to use an external effects processor to add the finishing touch to your performance or recording. RCA CD/Tape I/O comes standard on all XENYX mixers.
XENYX Mic Preamps
All XENYX mixers have one thing in common; great-sounding, high headroom XENYX mic preamps. XENYX preamps offer 130dB of dynamic range with a bandwidth that extends from below 10Hz to well above 200kHz. As a result, XENYX mixers can reproduce a cleaner, transparent performance.
British EQ
The British consoles of the 1960s and ˜70s changed the sound of rock and roll. Without them, the British Invasion might not have even happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The channel EQs on all XENYX mixers are based on that very same circuitry, allowing you to saturate signals with warmth and character. Even when applied generously, these equalizers exhibit forgiveness and superb audio quality.
USB Audio Interface
Modern technology has put personal recording well within the reach of virtually anyone with access to a computer. But how do you get all that music flying around your brain into a computer? Thanks to the built-in, bi-directional stereo USB audio interface, you can connect directly to your PC or Mac computer via a single USB cable. Now any signal source connected to the mixer can be recorded straight to your hard drive.
Included Software
Behringer has put together a massive software download that includes Audacity (the most popular open source audio editor), Podifier, Juice, Podnova and Golden Ear (a great selection of podcasting software). You’re ready to go live on your PC or Mac right out of the box! You also get more than 100 virtual instruments and 50 FX plug-ins, turning your computer into a complete home-based or mobile recording studio.
Durability and sound quality: the AR-133 direct box is without peer in both categories. The AR-133’s metal casing could hold up under a buffalo stampede, and its strong rubber grips ensure it can’t be kicked around easily. The sound is low-impedance bliss-clear, powerful and incredibly transparent. The AR-133 will be part of your gear for a long time to come.
The JBL Professional SRX815 Passive – 15″ Two-Way Bass Reflex Passive System is designed for use as a light-duty main PA, monitor, or rear or side fill. Featuring M10 suspension points and feet for both floor standing and monitor use, the speaker is suitable for musicians, bands, and DJs, concert use, public speaking, or installations such as performance venues, corporate spaces, educational facilities or houses of worship. Tunings and presets are available for Crown ITech HD and XTI 2 amps as well as dbx VENU360 signal processor.
The JBL Professional SRX812 Passive – 12″ Two-Way Bass Reflex Passive System is designed for use as a light-duty main PA, monitor, or rear or side fill. Featuring M10 suspension points and feet for both floor-standing and monitor use, the speaker is suitable for musicians, bands, and DJs, concert use, public speaking, or installations such as performance venues, corporate spaces, educational facilities or houses of worship. Tunings and presets are available for Crown ITech HD and XTI 2 amps as well as the dbx VENU360 signal processor.
The JBL SRX835 Passive 15″ Three-Way Bass Reflex Passive System is suitable for live performance, mobile and fixed DJ, sound system rental, touring, and permanent installation applications. The system can deliver a frequency response of 41 to 20 kHz (-3 dB) and a maximum SPL of 137 dB.
The JBL Professional SRX818S Passive – 18″ Passive Subwoofer System is designed for concert, touring, or installed applications. With a standard M20 pole cup for use with top boxes, indexed feet for stacking in both standard and cardioid positons, and a maximum SPL of 136 dB, the subwoofer is suitable for musicians, bands, DJs, PA systems, performance venues, corporate spaces, houses of worship, and more. A variety of tunings and presets is available for Crown ITech HD and XTI 2 amps as well as the dbx VENU signal processor.
The JBL Professional SRX828S Passive- Dual-18″ Passive Subwoofer System is designed for concert, touring, or installed applications. With indexed feet for stacking in both standard and cardioid positions, 4800W peak-power handling, and a maximum SPL of 141 dB, the subwoofer is suitable for musicians, bands, DJs, PA, performance venues, corporate spaces, houses of worship, and more. The wide stance of the subwoofer is suitable for splaying top boxes. A variety of tunings and presets is available for Crown ITech HD and XTI 2 amps as well as the dbx VENU360 signal processor.
The Yamaha CXS15XLF offers thunderous low end, superb clarity, and best-in-class SPL performance. This bass-reflex subwoofer boasts 1,600-watt power handling, a 33Hz–150Hz frequency range, and can tackle any application you throw at it. A great-sounding, custom-designed transducer delivers rafter-shaking low end. The CXS15XLF can take full advantage of processor tuning settings when used with a Yamaha PX Series amplifier. This sub employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating. The CXS15XLF is a must-have for completing your full-range CZR system.
The Yamaha CXS15XLF is loaded with a great-sounding, custom-designed transducer. Its durable cast-aluminum frame and 4-inch voice coil deliver jaw-dropping bass response, even at cranked volumes. Adding a CXS15XLF can extend your system’s low-frequency performance down to a startling 33Hz, for a throbbing low-end thump that’s sure to make an impression.
If you power the CXS15XLF with a Yamaha PX Series amplifier, you can take full advantage of its dedicated speaker processor tuning settings. Fine-tune your low end with equalization, and add limiting to protect your transducer from dangerous signal spikes. Dial in your crossover and activate Cardioid Mode to decrease stage volume while increasing the low-frequency output directed towards your audience. Use the built-in delay network to ensure phase coherency across all speakers in larger rigs. And all of these advanced features are easily accessible from the LCD display. We find that a PX Series amplifier and CXS15XLF are a match made in heaven.
The Yamaha CXS18XLF offers thunderous low end, superb clarity, and best-in-class SPL performance. This bass-reflex subwoofer boasts 2,000-watt power handling, a 29Hz–150Hz frequency range, and can tackle any application you throw at it. A great-sounding, custom-designed transducer delivers rafter-shaking low end. The CXS18XLF can take full advantage of processor tuning settings when used with a Yamaha PX Series amplifier. This sub employs a lightweight, yet durable, plywood cabinet with a premium-grade polyurea coating. The CXS18XLF is a must-have for completing your full-range CZR system.
The Yamaha CXS18XLF is loaded with a great-sounding, custom-designed transducer. Its durable cast-aluminum frame and 4-inch voice coil deliver jaw-dropping bass response, even at cranked volumes. Adding a CXS18XLF can extend your system’s low-frequency performance down to a startling 29Hz, for a throbbing low-end thump that’s sure to make an impression.
If you power the CXS18XLF with a Yamaha PX Series amplifier, you can take full advantage of its dedicated speaker processor tuning settings. Fine-tune your low end with equalization, and add limiting to protect your transducer from dangerous signal spikes. Dial in your crossover and activate Cardioid Mode to decrease stage volume while increasing the low-frequency output directed towards your audience. Use the built-in delay network to ensure phase coherency across all speakers in larger rigs. And all of these advanced features are easily accessible from the LCD display. We find that a PX Series amplifier and CXS18XLF are a match made in heaven.
Copyright © 2020 electronicemporium. All Rights Reserved. Developed By R2A
Select at least 2 products
to compare
