Shop

Showing 97–108 of 940 results

Compare
Quick View
Bose S1 Pro+ Multi-position PA System with Battery
Portable PA Systems
₹83,799.00
Bose’s Most Portable Battery-powered PA Yet
The Bose S1 Pro+ is an ultra-lightweight, all-in-one PA system that packs a lot of power into its 14.4-pound, multi-position enclosure. Whether you tilt, seat, or mount it, the S1 Pro+ delivers rich, even coverage to an entire room, with Auto EQ to eliminate hotspots on the floor. You get two channels with independent EQ, reverb, and ToneMatch technology to ensure flattering reproduction of voices and instruments, along with a dedicated third channel with an aux input and stereo Bluetooth streaming. Optional transmitters provide a complete wireless experience with microphones and instruments alike, and guitarists will appreciate the S1 Pro+’s built-in FX loop. You also get a livestream mode via USB-C. Moreover, the S1 Pro+’s integrated OLED screens make operating this portable PA an absolute walk in the park. The Bose S1 Pro+ includes a convenient carry handle for lightning-fast load-ins and setups, plus a factory-installed Li-ion battery for the utmost portability.
More powerful than ever

The Bose S1 Pro+ offers many advancements over its predecessor. For starters, it weighs a mere 14.4 pounds — you can likely carry it one-handed. It flaunts integrated OLED screens for dead-simple operation; plus, the displays rotate depending on the speaker’s position. You’ll benefit from a full wireless experience with the use of optional transmitters (sold separately), as well as compatibility with the Bose Music App. Stereo Bluetooth streaming is on tap, as is a livestream mode with USB-C. Finally, an FX loop is present on the S1 Pro+’s inputs for use with guitar effects and pedalboards.

Even coverage with zero hotspots

Bose sound reinforcement solutions are known for their wide, even coverage, and the S1 Pro+ is no exception. Sound is dispersed not just through the front of the enclosure but the sides as well, for room-filling sound from a single unit. Reviewers were quick to note the Auto EQ feature at work, which keeps the sound consistent as listeners move about a room.

More than a mere PA

The Bose S1 Pro+ is a solid PA and a capable wedge monitor, practice amp, and playback system. Whether you’re on the road, practicing at home, or streaming music for parties, you’ll always find a use for the Bose S1 Pro+.

ToneMatch technology

The S1 Pro+ includes a streamlined version of Bose’s ToneMatch technology on channels 1 and 2. Use the microphone setting for rich, lush vocal reproduction at a touch, or the guitar setting for pre-programmed settings for your acoustic. ToneMatch can also be toggled off completely.

Factory-installed Li-ion battery

Your Bose S1 Pro+ includes a factory-installed Li-ion battery. Enjoy hours of powerful sound reproduction on the go, from the subway to the Siberian Arctic. With Bose, no location is too remote to gig.

Bose S1 Pro+ Multi-position PA System Features:

The ultimate portable PA for soloists, small acts, and event speakers

Lightweight — just 14.4 lbs. — with a convenient carry handle

Can be tilted, seated, or stand mounted (35mm pole mount)

Works great as a wedge monitor or playback system, too

Integrated OLED screens facilitate dead-simple operation

No hotspots — wide dispersion and Auto EQ deliver even coverage

ToneMatch technology offers one-touch vocal and acoustic guitar presets

2 channels with independent EQ and reverb

Dedicated 3rd channel for aux input or stereo Bluetooth streaming

Full wireless experience with the use of optional transmitters (sold separately)

Livestream mode with USB-C

FX loop for use with guitar effects and pedalboards

Factory-installed Li-ion battery gives you hours of portable playback

Compatible with the Bose Music App for easy wireless control

Tech Specs

Type:Powered PA Speaker

Speaker Drivers:1 x 6″ LF High Excursion woofer, 3 x 2.25″ HF drivers

Number of Mixer Channels:3

Number of Mic Preamps:2

EQ:2-band Channel EQ

Effects:Reverb

Inputs:2 x XLR (mic), 1 x 1/4″ TRS (aux), 1 x 1/8″ TRS (aux)

Outputs:1 x XLR (line out)

USB:1 x Type A, 1 x Type C

Bluetooth:Yes

Other I/O:2 x Integrated Bose Wireless Receivers

Total Power:150W

Frequency Response:70Hz-16khz (±3 db)

Software:Bose Music App

Features:Wireless Transmitter Charging, Live Stream Mode, Microphone EQ Presets

Enclosure Material:Polypropylene

Mounting Options:1.38″ pole mount, Tilt-back, Floor Monitor

Battery-powered:Yes

Power Source:Rechargeable battery included (11 hour play time) / Standard IEC AC cable

Height:13.1″

Width:9.4″

Depth:11.1″

Weight:14.4 lbs.
Add to cart
Compare
Quick View
Cloud Microphones Cloudlifter CL-1 Mic Activator
Recording Microphones
₹18,499.00
Must-have Tool for Dynamic and Ribbon Mics!

From stage to studio, the Cloud Microphones Cloudlifter Mic Activator lets you get the best possible audio output from your low-output dynamic and ribbon microphones. The Cloudlifter CL-1 provides up to +25dB of gain that partners with your preamp in amplifying your mics’ signal for clean, transparent recordings. With a Cloudlifter in your rig, you need not hesitate to take full advantage of your favorite ribbon mics and other go-to low-output dynamic mics.
Noise-free amplification

Many preamps sound great until you push them, resulting in all the hiss and crackle produced by the amplifier itself ending up in the mix. The gain boost provided by your Cloudlifter lets your mic pre work more efficiently, giving you the levels you need, without the noise.

Instant ribbon pre mod

Ribbon mics are wonderful, but many microphone preamplifiers are simply too weak to get enough signal out of them. A Cloudlifter Mic Activator utilizes an active circuit powered by your console or preamp’s phantom power to provide as much as +25dB of extra gain, turning even a budget console into a better ribbon preamp.

Totally transparent boost

Cloud Microphones designed their Cloudlifter series around direct-coupled, Class A discrete JFET circuitry, engineered to preserve the natural sound of your mics. So, no matter how dramatic of an impact this transparent technology may have on your recordings, you can be sure you’re really just hearing your mic at its best.

Essential for long cable runs

If you work in a large, multi-room studio or an auditorium like the Sweetwater Performance Theatre, then you won’t believe what a difference a Cloudlifter will make. With its extra gain boost to drive your signal, even cable runs over hundreds of feet won’t drain the life out of your sound. The result is nothing short of remarkable.

Cloud Microphones CL-1 Cloudlifter 1-channel Mic Activator Features:

Provides up to 25dB of noise-free amplification; your low-output mics will come to life

Turns any microphone preamplifier into a studio-quality ribbon pre

Boosts the signal at the source, so long cable runs won’t sap the signal’s vitality

Ultra-transparent Class A JFET circuitry protects your tone

Free lifetime limited warranty for parts and labor with product registration

Manufactured responsibly in Cloud Microphones’ Tucson, Arizona factory

Tech Specs

Type:Mic Level Booster

Channels:1

Inputs:1 x XLR

Outputs:1 x XLR

Height:2″

Depth:4.5″

Width:2″

Weight:0.85 lbs.

Manufacturer Part Number:CL-1
Add to cart
Compare
Quick View
Crown XLi1500 Power Amplifier
Amplifiers
₹32,999.00
An Everyday Power Amp You Can Count On!

Powerful, affordable, reliable – these words define Crown’s XLi 1500 power amplifier as well as the rest of the XLi series amps. Whether you’re a musician, DJ, or live sound engineer, you’re sure to appreciate what this remarkably rugged amplifier can do for your PA system. With user-selectable input sensitivity (.755V or 1.4V) and a host of standard output connectors, the 900-watt XLi 1500 is a perfect fit for mobile rigs, traditional venues, and houses of worship alike. And with over six decades making some of the most popular power amplifiers on Earth, you know you can trust Crown and your XLi 1500 no matter what.

Crown XLi 1500 Power Amplifier at a Glance:

All the versatility you can ask for in a budget-friendly amplifier

Packed with the quality I/O your venue or mobile rig demands

Smart and rugged design protects against everyday hazards

All the versatility you can ask for in a budget-friendly amplifierYou know the old adage about how if you ask two live sound engineers how to setup a system you’ll get three answers? Well, this Crown XLi 1500 power amplifier can handle them all. Wether you need an amp that can do stereo, parallel, or bridged-mono mode, XLi series amps will do the trick. Even if you’re constantly reconfiguring your system, you’ll get all the versatility you need from your XLi 1500.

Packed with the quality I/O your venue or mobile rig demandsNo two rigs are the same, which is why Crown outfitted their XLi amplifiers (including the XLi 1500) with all of the popular connections serious live sound engineers demand. On the input side, the XLi 1500 offers both balanced XLR and unbalanced RCA jacks, accommodating professional mixers and DJ systems alike. Conversely, both low-tech binding posts and modern speakON connectors let you attach any variety of passive PA speakers.

Smart and rugged design protects against everyday hazardsOne thing no engineer can afford is losing an amp right before (or in the middle of) a show. With a Crown XLi 1500 in your rig, you can worry about setting a good mix, not keeping your amp from exploding. Crown built their XLi series power amplifiers with safety in mind, protecting against shorts, empty loads, on/off thumps, and more. And while they were at it, they even gave the XLi 1500 a mighty effective shield against the kind of RF that can ruin any show, so you don’t have to cringe the next time the talent shows up with their special (read, outdated) wireless system.

Crown XLi 1500 Power Amplifier Features:

An affordable and reliable power amplifier you can use in any PA system

900-watts in bridged-mono mode, up to 450-watts stereo/parallel operation

Includes both unbalanced RCA and balanced XLR input connectivity

Binding post and speakON output connectors let you use virtually any passive PA speakers

Selectable input voltage (.755V or 1.4V) lets you set up your rig to match your gear

LED power, fault, signal-presence, and clip indicators let you keep an eye on the safety of your amplifier

Forced-air cooling and protection against shorts, no-load, and on/off thumps ensure smooth operation and long life

Excellent shielding against radio-frequency interference keeps your sound clean, even in heavy wireless conditions

Get the power amp you need for a price you can afford with a Crown XLi 1500!
Tech Specs
- Number of Channels:2
- Power Class:Class AB
- Watts/Side @ 8 ohms:350W
- Watts/Side @ 4 ohms:450W
- Watts Bridged:900W @ 8 ohms
- Inputs:2 x RCA, 2 x XLR
- Outputs:2 x speakON, 2 x Binding Post
- Cooling System:Internal heat sinks with forced air plus fan-cooled, speed-regulated, thermal protection and flow-through ventilation from front
- Rack Spaces:2U
- Height:3.5″
- Depth:12.4″
- Width:19″
- Weight:28 lbs.
Add to cart
Compare
Quick View
Crown XLi2500 Power Amplifier
Amplifiers
₹34,999.00
An Everyday Power Amp You Can Count On!

Powerful, affordable, reliable – these words define Crown’s XLi 2500 power amplifier as well as the rest of the XLi series amps. Whether you’re a musician, DJ, or live sound engineer, you’re sure to appreciate what this remarkably rugged amplifier can do for your PA system. With user-selectable input sensitivity (.755V or 1.4V) and a host of standard output connectors, the 1,500-watt XLi 2500 is a perfect fit for mobile rigs, traditional venues, and houses of worship alike. And with over six decades making some of the most popular power amplifiers on Earth, you know you can trust Crown and your XLi 2500 no matter what.

Crown XLi 2500 Power Amplifier at a Glance:

All the versatility you can ask for in a budget-friendly amplifier

Packed with the quality I/O your venue or mobile rig demands

Smart and rugged design protects against everyday hazards

All the versatility you can ask for in a budget-friendly amplifier

You know the old adage about how if you ask two live sound engineers how to setup a system you’ll get three answers? Well, this Crown XLi 2500 power amplifier can handle them all. Wether you need an amp that can do stereo, parallel, or bridged-mono mode, XLi series amps will do the trick. Even if you’re constantly reconfiguring your system, you’ll get all the versatility you need from your XLi 2500.

Packed with the quality I/O your venue or mobile rig demands

No two rigs are the same, which is why Crown outfitted their XLi amplifiers (including the XLi 2500) with all of the popular connections serious live sound engineers demand. On the input side, the XLi 2500 offers both balanced XLR and unbalanced RCA jacks, accommodating professional mixers and DJ systems alike. Conversely, both low-tech binding posts and modern speakON connectors let you attach any variety of passive PA speakers.

Smart and rugged design protects against everyday hazards

One thing no engineer can afford is losing an amp right before (or in the middle of) a show. With a Crown XLi 2500 in your rig, you can worry about setting a good mix, not keeping your amp from exploding. Crown built their XLi series power amplifiers with safety in mind, protecting against shorts, empty loads, on/off thumps, and more. And while they were at it, they even gave the XLi 2500 a mighty effective shield against the kind of RF that can ruin any show, so you don’t have to cringe the next time the talent shows up with their special (read, outdated) wireless system.

Crown XLi 2500 Power Amplifier Features:

An affordable and reliable power amplifier you can use in any PA system

1,500-watts in bridged-mono mode, up to 750-watts stereo/parallel operation

Includes both unbalanced RCA and balanced XLR input connectivity

Binding post and speakON output connectors let you use virtually any passive PA speakers

Selectable input voltage (.755V or 1.4V) lets you set up your rig to match your gear

LED power, fault, signal-presence, and clip indicators let you keep an eye on the safety of your amplifier

Forced-air cooling and protection against shorts, no-load, and on/off thumps ensure smooth operation and long life

Excellent shielding against radio-frequency interference keeps your sound clean, even in heavy wireless conditions

Get the power amp you need for a price you can afford with a Crown XLi 2500!
Tech Specs
- Number of Channels:2
- Power Class:Class AB
- Watts/Side @ 8 ohms:500W
- Watts/Side @ 4 ohms:750W
- Watts Bridged:1,500W @ 8 ohms
- Inputs:2 x RCA, 2 x XLR
- Outputs:2 x speakON, 2 x Binding Post
- Cooling System:Internal heat sinks with forced air plus fan-cooled, speed-regulated, thermal protection and flow-through ventilation from front
- Rack Spaces:2U
- Height:3.5″
- Depth:12.4″
- Width:19″
- Weight:29.7 lbs.
Add to cart
Compare
Quick View
Crown XLi3500 Power Amplifer
Amplifiers
₹49,999.00
An Everyday Power Amp You Can Count On!

Powerful, affordable, reliable – these words define Crown’s XLi 3500 power amplifier as well as the rest of the XLi series amps. Whether you’re a musician, DJ, or live sound engineer, you’re sure to appreciate what this remarkably rugged amplifier can do for your PA system. With user-selectable input sensitivity (.755V or 1.4V) and a host of standard output connectors, the 2,700-watt XLi 3500 is a perfect fit for mobile rigs, traditional venues, and houses of worship alike. And with over six decades making some of the most popular power amplifiers on Earth, you know you can trust Crown and your XLi 3500 no matter what.

Crown XLi 3500 Power Amplifier at a Glance:

All the versatility you can ask for in a budget-friendly amplifier

Packed with the quality I/O your venue or mobile rig demands

Smart and rugged design protects against everyday hazards

All the versatility you can ask for in a budget-friendly amplifierYou know the old adage about how if you ask two live sound engineers how to setup a system you’ll get three answers? Well, this Crown XLi 3500 power amplifier can handle them all. Wether you need an amp that can do stereo, parallel, or bridged-mono mode, XLi series amps will do the trick. Even if you’re constantly reconfiguring your system, you’ll get all the versatility you need from your XLi 3500.

Packed with the quality I/O your venue or mobile rig demandsNo two rigs are the same, which is why Crown outfitted their XLi amplifiers (including the XLi 3500) with all of the popular connections serious live sound engineers demand. On the input side, the XLi 3500 offers both balanced XLR and unbalanced RCA jacks, accommodating professional mixers and DJ systems alike. Conversely, both low-tech binding posts and modern speakON connectors let you attach any variety of passive PA speakers.

Smart and rugged design protects against everyday hazardsOne thing no engineer can afford is losing an amp right before (or in the middle of) a show. With a Crown XLi 3500 in your rig, you can worry about setting a good mix, not keeping your amp from exploding. Crown built their XLi series power amplifiers with safety in mind, protecting against shorts, empty loads, on/off thumps, and more. And while they were at it, they even gave the XLi 3500 a mighty effective shield against the kind of RF that can ruin any show, so you don’t have to cringe the next time the talent shows up with their special (read, outdated) wireless system.

Crown XLi 3500 Power Amplifier Features:

An affordable and reliable power amplifier you can use in any PA system

2,700-watts in bridged-mono mode, up to 1350-watts stereo/parallel operation

Includes both unbalanced RCA and balanced XLR input connectivity

Binding post and speakON output connectors let you use virtually any passive PA speakers

Selectable input voltage (.755V or 1.4V) lets you set up your rig to match your gear

LED power, fault, signal-presence, and clip indicators let you keep an eye on the safety of your amplifier

Forced-air cooling and protection against shorts, no-load, and on/off thumps ensure smooth operation and long life

Excellent shielding against radio-frequency interference keeps your sound clean, even in heavy wireless conditions

Get the power amp you need for a price you can afford with a Crown XLi 3500!
Tech Specs
- Number of Channels:2
- Power Class:Class AB
- Watts/Side @ 8 ohms:1,000W
- Watts/Side @ 4 ohms:1,350W
- Watts Bridged:2,700W @ 8 ohms
- Inputs:2 x RCA, 2 x XLR
- Outputs:2 x speakON, 2 x Binding Post
- Cooling System:Internal heat sinks with forced air plus fan-cooled, speed-regulated, thermal protection and flow-through ventilation from front
- Rack Spaces:2U
- Height:3.5″
- Depth:14.4″
- Width:19″
- Weight:43 lbs.
Read more
Compare
Quick View
Crown XTi6002 Power Amplifier
Amplifiers
₹108,999.00
Need Power? Trust Crown!

Crown does it again! Their power amps are near-legendary, and the XTi 2 series is yet another example of rock-solid, powerful, innovative power amplification. Here, the XTi 6002 is packed with Peak Plus Limiters that give you full control over threshold, attack, and release. What’s more, the Enhanced Subharmonic Synth section gives you control over frequency, gain, and filter type, so you can tune your XTi 6002 to your system. Beyond that, there are three fan modes you can choose from – normal, early, and fullspeed – so you can match the fan performance to your needs. Other noteworthy features include system monitoring for software visibility of AC line voltage and power supply temperature, integrated cast-aluminum handles for easy handling and dependable durability, a locking power cord clip, high-tech control software, and 29 user-definable presets. Bottom line? The XTi 2 series, including the XTi 6002, gives you an excellent solution for power amplification. Choose the one that best meets your power needs.

Crown XTi 6002 Features at a Glance:
- Stereo Wattage: 3000W @ 2 ohms, 2100W @ 4 ohms, 1200W @ 8 ohms
- Bridged Mono Wattage: 4200W @ 8 ohms, 6000W @ 4 ohms
- Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack, and release
- Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
- 3 User-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application
- New system monitoring provides software visibility of AC line voltage and power supply temperature
- Integrated cast-aluminum handles for easy handling and enhanced durability
- Locking power cord clip provides a secure connection between the amplifier and power cord
- Updated HiQnet Band Manager and System Architect control software
- Increased number of presets to a total of 30; 29 of which are user definable
Trust the Crown XTi 6002 for dependable power amplification!
Tech Specs
- Number of Channels:2
  
  Watts/Side @ 8 ohms:1200W
  
  Watts/Side @ 4 ohms:2100W
  
  Watts/Side @ 2 ohms:3000W
  
  Watts Bridged:4200W @ 8 ohms
  
  Inputs:2 x XLR
  
  Outputs:2 x Binding Post, 2 x SpeakON
  
  Cooling System:Proportional Speed Fan with Front-to-Rear Airflow
  
  DSP:Yes
  
  Filters:Yes
  
  Rack Spaces:2U
  
  Power Source:NEMA 5-20 Plug (20A outlet or adapter required)
  
  Height:3.5″
  
  Depth:16.2″
  
  Width:19″
  
  Weight:24 lbs.
Add to cart
Compare
Quick View
DBX DriveRack 260 Loudspeaker Management System
Powered Speakers
₹47,299.00
Everything You Need for Complete Control of Your PA System
The 260 capitalizes on the road tested and contractor approved DriveRack, providing state-of-the-art signal processing while utilizing a simple and intuitive user interface. It offers two independent channels of processing power with a linkable 28-band Graphic Equalizer, industry-standard dbx stereo compressor module, feedback eliminator and the 120A Subharmonic Synthesizer on the input, with a six channel output system that includes parametric EQs, PeakStopPlus limiters (to provide protection against speaker blowouts) and alignment delay.

These features combined with the Wizard setup system and complete DriveWare GUI control represent a methodical design that is guaranteed to deliver optimal, all-inclusive processing in a completely scalable system. The 260 provides full bandpass and crossover configurations as well as independent output processing and a full time RTA for live sound applications. Contractors will appreciate its control inputs for wall-panel logic control and the patent-pending Advanced Feedback Suppression.
dbx DriveRack 260 Features:

Feedback elimination

2.7 seconds of Alignment and Zone Delay

RS-232 PC GUI control

Classic dbx Compression and Limiting

Graphic and Parametric EQ

Auto-EQ function

Full Bandpass, Crossover, and Routing configurations

Auto Gain control

Pink Noise Generator and fulltime RTA

Set-up Wizard with JBL speaker and Crown Power Amp tunings

Security lockout

Wall Panel Control inputs
Add to cart
Compare
Quick View
DBX RTA-M Measurement Microphone
Installed Sound & Others
₹11,999.00
RTA Mic for the DriveRack

Real-time analyzer microphone for the DriveRack PA. Flat frequency response, super-accurate omnidirectional mic. Requires 15-48V phantom power to operate.

Tech Specs
- Microphone Type:Condenser
- Polar Pattern:Omni
- Frequency Response:20Hz-20kHz
- Output Impedance:250 ohms
- Sensitivity:-63 dB +-3 dB
- Connector:XLR
- Power Source:Phantom Power 9V-52VDC
- Dimensions:5.7″ x 0.78″
- Manufacturer Part Number:DBXRTA-M
Read more
Compare
Quick View
Electro-Voice ELX200-12P Powered Speakers
Powered Speakers
₹60,999.00
A New Champion Among Portable Loudspeakers
Electro-Voice ELX200 series powered speakers are engineered to deliver greater functionality than their predecessors in lighter-weight, ultra-portable form factors with superb build quality and elegant design. Live performers, DJs, and production companies will be amazed by the value packed into each ELX200 unit. This ELX200 12-inch 2-way powered speaker consists of a strong, internally reinforced composite cabinet with an ergonomically sound 3-handle design and M10 suspension points, an anteriorly placed Signal Synchronized Transducer (SST) waveguide that time aligns the woofer and the tweeter, and app-controllable QuickSmartDSP for best-in-class processing.
Heavyweight talent in a portable form

ELX200 series speakers deliver heavyweight sonics, thanks to extra-efficient, low-distortion Class-D amplification. But don’t worry; load in and load out will be a cinch, thanks to light but strong composite cabinet construction with internal reinforcement. These cabinets also feature a 3-handle design that gives you comfortable carry options to lessen strain.

Complex DSP made simple

Digital signal processing (DSP) has been around for a while now — so what makes Electro-Voice QuickSmartDSP special? For one thing, it embodies best-in-class processing power, giving you the highest-quality digital audio available to wow your audience. Plus, all the massive signal-shaping prowess of QuickSmartDSP is accessible through a single knob and an integrated liquid crystal display (LCD). Its four presets (Music, Live, Speech, and Club) are powerful and intuitively arranged within the menu, and they simply sound great, whether you’re the FOH engineer for a band, belting out your original tunes, running sound for a presenter, or spinning a killer set under the lights. QuickSmartDSP also gives you five user-programmable presets, crossover system matching for sub/top applications, input level control with precise metering, and of course Master volume control.

Tomorrow’s functionality — today

Have you been looking for mobile device management of your DSP? Via wireless Bluetooth technology, the QuickSmartMobile app lets you configure up to six ELX200 loudspeakers at the same time — from out front, where you can actually hear what the audience hears — ensuring your sound check results in optimal audio quality. It’s DSP accessibility is ahead of its time, and for you, it means quick, simple, precise, and mobile sound control.

SST design for enhanced acoustics

By positioning the ELX200 speaker’s horn more anteriorly than in conventional designs, the LF and HF transducers are more accurately time-aligned, resulting in enhanced sound quality. This design, called Signal Synchronized Transducer (SST), also allows for a more compact enclosure, a larger waveguide for better control over the dispersion pattern, deeper bass response, and reduction of distortion and standing waves inside the speaker enclosure. All of this results in better acoustics with a lower weight and a smaller footprint.

Electro-Voice ELX200 12″ 2-way Powered Speaker Features:

12-inch woofer and high-performance tweeter for balanced low-end punch and high-end clarity

Lightweight, easy-carry loudspeaker with next-level features for optimal performance

Class D amplification is extra-efficient and reduces distortion for cleaner audio

QuickSmartDSP offers best-in-class signal processing power with single-knob control

Efficient LCD menu access to four factory presets (Music, Live, Speech, and Club)

5 user-programmable presets let you dial in perfect sound for every venue or room

QuickSmartMobile app for simultaneous out-front configuration of up to 6 ELX200 speakers

SST optimizes transducer time alignment for enhanced acoustic quality

Integrated M10 suspension points for flying your speaker

Tech Specs

Powered:Yes

LF Driver Size:12″ EVS-12M

HF Driver Size:1″ DH-1C Titanium Compression Driver

Total Power:1200W Class D

Inputs:2 x XLR-1/4 combo, 1 x Dual RCA Stereo

Outputs:1 x XLR (thru)

Bluetooth:Yes (control/configure only)

Frequency Range:51Hz-20kHz (-10dB)

Frequency Response:57Hz-16kHz (-3dB)

Crossover Frequency:1700Hz

Maximum Peak SPL:130 dB SPL

Horizontal Coverage Angle:90 Degrees

Vertical Coverage Angle:60 Degrees

Signal Processing:QuickSmart DSP

Software:QuickSmart Mobile app

Enclosure Material:Polypropylene Composite

Mounting Options:Pole Mount, Floor Wedge, 3 x M10 Fly Points

Power Source:Standard IEC AC cable

Height:24.76″

Width:14.29″

Depth:13.54″

Weight:34.39 lbs.
Add to cart
Compare
Quick View
Electro-Voice ELX200-12SP Powered Subwoofer
Powered Speakers
₹74,999.00
A New Champion Among Portable Loudspeakers
The Electro-Voice ELX200 series powered speakers are engineered to deliver greater functionality than their predecessors in lighter-weight, ultra-portable form factors with superb build quality and elegant design. Live performers, DJs, and production companies will be amazed by the value packed into each ELX200 unit. This ELX200 12″ powered subwoofer consists of a strong, lightweight plywood enclosure, an integrated M20 pole mount, and a convenient two-handle design. On top of that, the ELX200’s app-controllable QuickSmartDSP gives you best-in-class processing that you can manage from your mobile device.
Heavyweight talent in a portable form

ELX200 series subwoofers deliver heavyweight sonics, thanks to extra-efficient, low-distortion Class-D amplification. But don’t worry; load-in and -out will be a cinch, due to the ELX200’s light but strong plywood cabinet construction that can survive the tour without straining your back. These cabinets also feature a two-handle design that gives you comfortable carry positioning and facilitates team-lifting to lessen strain to an even greater degree.

Complex DSP made simple

Digital signal processing (DSP) has been around for a while now — so what makes Electro-Voice QuickSmartDSP special? For one thing, it embodies best-in-class processing power, giving you the highest-quality digital audio available to wow your audience. Plus, all the massive signal-shaping prowess of QuickSmartDSP is accessible through a single knob and an integrated liquid crystal display (LCD). Its four presets (Music, Live, Speech, and Club) are powerful and intuitively arranged within the menu, and they simply sound great, whether you’re the FOH engineer for a band, belting out your original tunes, running sound for a presenter, or spinning a killer set under the lights. QuickSmartDSP also gives you five user-programmable presets, crossover system matching for sub/top applications, input level control with precise metering, and of course Master volume control.

Tomorrow’s functionality — today

Have you been looking for mobile device management of your DSP? Via wireless Bluetooth technology, the QuickSmartMobile app lets you configure up to six ELX200 loudspeakers at the same time — from out front, where you can actually hear what the audience hears — ensuring your sound check results in optimal audio quality. It’s DSP accessibility is ahead of its time, and for you, it means quick, simple, precise, and mobile sound control.

Electro-Voice ELX200 12″ Powered Subwoofer Features:

12″ woofer cranks out plenty of low-end punch

Lightweight, easy-carry sub with next-level features for optimal performance

1200W Class D amplification is extra-efficient and reduces distortion for cleaner audio

QuickSmartDSP offers best-in-class signal processing power with single-knob control

LCD menu access to sophisticated signal shaping, four factory presets, and five user presets

QuickSmartMobile app for simultaneous out-front configuration of up to 6 ELX200 speakers

Tech Specs

Powered:Yes

LF Driver Size:12″ EVS-12L woofer

Power Rating:1200W

Inputs:2 x XLR-1/4″ combo

Outputs:2 x XLR (thru)

Frequency Range:41Hz-165Hz (-10dB)

Frequency Response:49Hz-135Hz (-3dB)

Crossover Frequency:Low Pass 80Hz, 100Hz, 120Hz, 150Hz

Maximum Peak SPL:129 dB SPL

Signal Processing:QuickSmart DSP, QuickSmart Mobile app

Wireless :Bluetooth (control/configure only)

Mounting Options:M20 Pole Mount Plate

Enclosure Material:15mm Plywood with EVCoat

Height:15.63″

Width:17.52″

Depth:17.99″

Weight:42.11 lbs.
Add to cart
Compare
Quick View
Electro-Voice ELX200-18SP Powered Subwoofer
Powered Speakers
₹89,999.00
A New Champion Among Portable Loudspeakers
The Electro-Voice ELX200 series powered speakers are engineered to deliver greater functionality than their predecessors in lighter-weight, ultra-portable form factors with superb build quality and elegant design. Live performers, DJs, and production companies will be amazed by the value packed into each ELX200 unit. This ELX200 18″ powered subwoofer consists of a strong, lightweight plywood enclosure, an integrated M20 pole mount, and a convenient 2-handle design. On top of that, the ELX200’s app-controllable QuickSmartDSP gives you best-in-class processing that you can manage from your mobile device.
Heavyweight talent in a portable form

ELX200 series subwoofers deliver heavyweight sonics, thanks to extra-efficient, low-distortion Class-D amplification. But don’t worry; load-in and -out will be a cinch, due to the ELX200’s light but strong plywood cabinet construction that can survive the tour without straining your back. These cabinets also feature a two-handle design that gives you comfortable carry positioning and facilitates team-lifting to lessen strain to an even greater degree.

Complex DSP made simple

Digital signal processing (DSP) has been around for a while now — so what makes Electro-Voice QuickSmartDSP special? For one thing, it embodies best-in-class processing power, giving you the highest-quality digital audio available to wow your audience. Plus, all the massive signal-shaping prowess of QuickSmartDSP is accessible through a single knob and an integrated liquid crystal display (LCD). Its four presets (Music, Live, Speech, and Club) are powerful and intuitively arranged within the menu, and they simply sound great, whether you’re the FOH engineer for a band, belting out your original tunes, running sound for a presenter, or spinning a killer set under the lights. QuickSmartDSP also gives you five user-programmable presets, crossover system matching for sub/top applications, input level control with precise metering, and of course Master volume control.

Tomorrow’s functionality — today

Have you been looking for mobile device management of your DSP? Via wireless Bluetooth technology, the QuickSmartMobile app lets you configure up to six ELX200 loudspeakers at the same time — from out front, where you can actually hear what the audience hears — ensuring your sound check results in optimal audio quality. It’s DSP accessibility is ahead of its time, and for you, it means quick, simple, precise, and mobile sound control.

Electro-Voice ELX200 Features:

18-inch woofer cranks out massive low-end punch

Lightweight, easy-carry sub with next-level features for optimal performance

1200W Class D amplification is extra-efficient and reduces distortion for cleaner audio

QuickSmartDSP offers best-in-class signal processing power with single-knob control

LCD menu access to sophisticated signal shaping, four factory presets, and five user presets

QuickSmartMobile app for simultaneous out-front configuration of up to 6 ELX200 speakers

Tech Specs

Powered:Yes

LF Driver Size:18″ EVS-18L woofer

Power Rating:1200W

Inputs:2 x XLR-1/4″ combo

Outputs:2 x XLR (thru)

Frequency Range:40Hz-145Hz (-10dB)

Frequency Response:47Hz-105Hz (-3dB)

Crossover Frequency:Low Pass 80Hz, 100Hz, 120Hz, 150Hz

Maximum Peak SPL:132 dB SPL

Signal Processing:QuickSmart DSP, QuickSmart Mobile app

Wireless :Bluetooth (control/configure only)

Mounting Options:M20 Pole Mount Plate

Enclosure Material:15mm Plywood with EVCoat

Height:23.62″

Width:19.96″

Depth:22.6″

Weight:63.93 lbs.
Add to cart
Compare
Quick View
Electro-Voice EV Evolve 50M
Portable PA Systems
₹151,999.00
Low-Profile PA with Standout Sound

The Electro-Voice EVOLVE 50M is a versatile, ultra-compact PA system that’s perfect for small- and medium-sized venues. Packing 1,000 watts of power, the EVOLVE 50M can be used on its own by solo artists or daisy-chained with other units for larger venues with ensembles. This PA system consists of three major parts: a potent 12-inch woofer, a lightweight aluminum sub pole, and a column array with eight 3.5-inch neodymium drivers. The EVOLVE 50M has a proprietary waveguide design that provides 120° of horizontal coverage and 40° of vertical coverage to ensure that the back of the house will always hear your mix. It has an onboard 8-channel digital mixer that can handle microphones, guitars, instruments, and many more. Featuring wireless control via the QuickSmart mobile app and seamless Bluetooth streaming, the EVOLVE 50M has enough functionality for any performer.
Ultra-portable, collapsible design saves you time and effort

Lugging a heavy PA into the venue is a lot of work. The Electro-Voice EVOLVE 50M seeks to change that, tipping the scale at just 57.75 pounds. To make transportation easy, the EVOLVE 50M ships to your door with an included backpack for the column array and the aluminum speaker pole. Setup is simple: the two-section aluminum pole mounts into the subwoofer and transmits audio to the column array via internal integrated speaker wires. The intuitive design helps you get set up for your gig in no time at all. Just plug it all in and play!

The fully configurable digital mixer is ready for anything

The EVOLVE 50M has a fully configurable 8-channel digital mixer that you can control from your smartphone via the QuickSmart mobile app. You get four presets to cover some of the situations you may encounter. It includes a 3-band EQ, an onboard compressor, dual FX sends, and independent channel gain controls. In the app, you can add any one of the 30 professional-quality effects to your mix, including reverb, delay, chorus, flanger, and echo! Here, we especially appreciate the built-in Bluetooth streaming capability that allows you to keep the vibe going even if you need to step away from the stage.

Neodymium drivers deliver top-notch sound and expansive coverage

The EVOLVE 50M is a sonic powerhouse. The column array is loaded with eight 3.5-inch neodymium high-frequency drivers and a proprietary waveguide that provides an impressive 120° of horizontal coverage and 40° of vertical coverage. The excellent sound quality and dispersion of the column array is paired with the raw power of the ported 12-inch subwoofer to produce up to 127dB SPL with a frequency response as low as 43Hz. No matter where you’re playing, you can rest assured that every inch of the venue receives the best sound possible.

Electro-Voice EVOLVE 50M Features:

1,000W system packs a big punch

Collapsible design allows for compact storage and easy transport

Composite waveguides provide spacious coverage for the entire venue

8 column-arrayed HF drivers and 12-inch LF driver deliver impressive power

4 factory presets (Music, Live, Speech, and Club) help you set up for common situations

3-band EQ makes sound shaping simple and easy

Built-in Bluetooth connectivity allows you stream music seamlessly for intermission or backing tracks

QuickSmart mobile app provides powerful DSP and a variety of professional effects

Phantom power enables use with condenser microphones

Tech Specs

Type:Portable PA System

Speaker Drivers:1 x 12″ LF, 8 x 3.5″ HF

Number of Mixer Channels:8

EQ:3-band system EQ, 7-band graphic EQ

Effects:Reverb, Chorus, Echo

Inputs:4 x XLR/1/4″ combo, 2 x XLR/1/4″ combo (L/R), 1 x Dual RCA Stereo (line), 1 x 1/8″ (aux), 1 x 1/4″ (HI-Z)

Outputs:2 x XLR

Bluetooth:Yes

Other I/O:1 x 1/4″ (footswitch), 1 x RJ45

Total Power:1000W

Frequency Response:43Hz-20khz (±3 db)

Enclosure Material:15mm. Plywood, Aluminum Pole

Mounting Options:Floor

Power Source:Standard IEC AC power cord

Height:20.9″ (sub), 32.5″ (array)

Width:13.6″ (sub), 4″ (array)

Depth:18.5″ (sub), 6.9″ (array)

Weight:57.75 lbs. (total)
Add to cart