Shop

Showing 697–708 of 935 results

Compare
Quick View
Yamaha Stagepas 600BT Portable PA System
Portable PA Systems
₹86,900.00
An Ideal Compact PA for Small-to-midsized Venues

Whether you’re a public speaker, singer-songwriter, or in a band; the Yamaha StagePas 600BT is your all-in-one PA solution for pristine sound in small-to-midsized venues. The StagePas 600BT offers extensive connectivity. Equipped with Bluetooth wireless audio connectivity, the 600BT can stream audio to your StagePas system from any Bluetooth-paired device such as a smartphone, tablet, or laptop up to 33 feet away. The StagePas 600BT offers 3-band EQ on each channel. Four mic/line inputs feature XLR jacks, with phantom power on channels 1–2 and 1/4″ XLR combo inputs on channels 3–4; channel 4 is switchable to hi-Z for instruments with passive pickups. In addition, there are three stereo line input channels switchable for mono operation, plus support for RCA and 1/8″ stereo mini inputs. Monitor and subwoofer outputs on the 600BT provide easy expandability. For shows that require a monitor mix or extended low end, simply connect powered speakers such as Yamaha’s DXR Series full-range speakers or DXS Series subwoofers.
Bluetooth connectivity for setup flexibility

We’ve found the StagePas 600BT’s Bluetooth connectivity handy for effortlessly incorporating backing tracks, loops, intermission music, or even software instruments into your live performance setup without a cable — while placing the device for maximum access/safety. Audio is routed to channels 9/10 on the StagePas 600BT’s mixer. Couldn’t be simpler!

Lightweight and portable

The StagePas 600BT consists of two lightweight speakers and a detachable powered mixer, a pair of speaker cables, and a power cable, for a complete portable sound reinforcement solution that you can set up easily in virtually any environment. The mixer also fits into one of the speaker enclosures, making for easy transport and a smaller footprint while in use.

Excellent sound quality without hassles

Advanced Yamaha technologies help the StagePas achieve excellent professional sound quality without hassles. Built-in feedback suppression targets problem frequencies before they become audible. With one-knob control, Yamaha Master EQ optimizes audio to match its environment. Channels 1 through 4 are equipped with independent sends for the four studio-grade reverb types (Hall, Plate, Room, and Echo), which are derived from Yamaha’s acclaimed SPX series effects processors. You can also turn Reverb on and off via an optional footswitch — perfect for when an event host is speaking between songs.

Intelligent power management

With the StagePas 600BT delivering 680 watts of power, you are sure to be heard clearly throughout small-to-midsized venues. Intelligent DSP and advanced limiting protect the system and ensure the most efficient power usage. What’s more, custom designed waveguides help the StagePas achieve broad sound distribution for maximum coverage.

Yamaha StagePas 600BT Portable PA with Bluetooth Features:

Full stereo operation with 680 watts of power; ideal for small-to-midsized venues

1-Knob Master EQ; 3-band EQ on each channel

One Button Intelligent Feedback Suppression

Best-in-class sound quality

High-quality SPX digital reverb

Class 2 Bluetooth v4.1 audio streaming

Tech Specs

Type:Powered mixer with 2 passive speakers

Speaker Drivers:1 x 10″ LF, 1 x 1.4″ HF

Number of Mixer Channels:10

Number of Mic Preamps:4

Phantom Power:Channel 1, 2

EQ:3-band Channel EQ, 1-Knob Master EQ

Effects:Reverb

Inputs:2 x XLR, 2 x XLR-1/4″ combo, 6 x 1/4″ TS, 1 x Dual RCA Stereo, 1 x 1/8″

Outputs:2 x 1/4″ (speaker), 2 x 1/4″ (monitor), 1 x 1/4″ (subwoofer)

Bluetooth:Yes, v4.1

Other I/O:1 x 1/4″ (reverb footswitch)

Total Power:680W

Frequency Response:40Hz-20khz (-3 dB)

Playback:Bluetooth streaming

Mounting Options:Pole, Floor

Power Source:Standard IEC AC cable

Height:21.45″ (speaker), 7.75″ (mixer)

Width:13.18″ (speaker), 13.7″ (mixer)

Depth:12.55″ (speaker), 5.31″ (mixer)

Weight:56.43 lbs. (total), 24.03 lbs. (2 x speaker), 8.37 lbs. (mixer)

Manufacturer Part Number:STAGEPAS 600BT
Add to cart
Compare
Quick View
Yamaha Stagepas 400BT Portable PA System
Portable PA Systems
₹63,999.00
An Ideal Compact PA for Intimate Venues

Whether you’re a public speaker, singer-songwriter, or in a band; the Yamaha StagePas 400BT is your all-in-one PA solution for pristine sound in smaller venues. The StagePas 400BT offers extensive connectivity. Equipped with Bluetooth wireless audio connectivity, the 400BT can stream audio to your StagePas system from any Bluetooth-paired device such as a smartphone, tablet, or laptop up to 33 feet away. The StagePas 400BT offers 2-band EQ on each channel. Four mic/line inputs feature XLR jacks, with phantom power on channels 1–2 and 1/4″ XLR combo inputs on channels 3–4; channel 4 is switchable to hi-Z for instruments with passive pickups. In addition, there are two stereo line input channels switchable for mono operation, plus support for RCA and 1/8″ stereo mini inputs. Monitor and subwoofer outputs on the 400BT provide easy expandability. For shows that require a monitor mix or extended low end, simply connect powered speakers such as Yamaha’s DXR Series full-range speakers or DXS Series subwoofers.
Bluetooth connectivity for setup flexibility

Here , we’ve found the StagePas 400BT’s Bluetooth connectivity handy for effortlessly incorporating backing tracks, loops, intermission music, or even software instruments into your live performance setup without a cable — while placing the device for maximum access/safety. Audio is routed to channels 7/8 on the StagePas 400BT’s mixer. Couldn’t be simpler!

Lightweight and portable

The StagePas 400BT consists of two lightweight speakers and a detachable powered mixer, a pair of speaker cables, and a power cable, for a complete portable sound reinforcement solution that you can set up easily in virtually any environment. The mixer also fits into one of the speaker enclosures, making for easy transport and a smaller footprint while in use.

Excellent sound quality without hassles

Advanced Yamaha technologies help the StagePas achieve excellent professional sound quality without hassles. Built-in feedback suppression targets problem frequencies before they become audible. With one-knob control, Yamaha Master EQ optimizes audio to match its environment. Channels 1 through 4 are equipped with independent sends for the four studio-grade reverb types (Hall, Plate, Room, and Echo), which are derived from Yamaha’s acclaimed SPX series effects processors. You can also turn Reverb on and off via an optional footswitch — perfect for when an event host is speaking between songs.

Intelligent power management

With the StagePas 400BT delivering 400 watts of power, you are sure to be heard clearly throughout smaller venues. Intelligent DSP and advanced limiting protect the system and ensure the most efficient power usage. What’s more, custom designed waveguides help the StagePas achieve broad sound distribution for maximum coverage.

Yamaha StagePas 400BT Portable PA with Bluetooth Features:

Full stereo operation with 400 watts of power; ideal for intimate venues

1-Knob Master EQ; 2-band EQ on each channel

One Button Intelligent Feedback Suppression

Best-in-class sound quality

High-quality SPX digital reverb

Class 2 Bluetooth v4.1 audio streaming
Tech Specs

Type:Powered mixer with 2 passive speakers

Speaker Drivers:1 x 8″ LF, 1 x 1″ HF

Number of Mixer Channels:8

Number of Mic Preamps:4

Phantom Power:Channel 1, 2

EQ:2-band Channel EQ, 1-Knob Master EQ

Effects:Reverb

Inputs:2 x XLR, 1 x XLR-1/4″ combo (mic/line), 1 x XLR-1/4″ combo (mic/line/Hi-Z), 4 x 1/4″ TS (dual stereo), 1 x Dual RCA Stereo

Outputs:2 x 1/4″ (speaker), 2 x 1/4″ (monitor), 1 x 1/4″ (subwoofer)

Bluetooth:Yes, v4.1

Other I/O:1 x 1/4″ (reverb footswitch)

Total Power:400W

Frequency Response:40Hz-20khz (-3 dB)

Playback:Bluetooth streaming

Mounting Options:Pole, Floor

Power Source:Standard IEC AC cable

Height:18.58″ (speaker), 7.08″ (mixer)

Width:11.37″ (speaker), 12.12″ (mixer)

Depth:10.82″ (speaker), 4.56″ (mixer)

Weight:40.34 lbs. (total), 16.97 lbs. (2 x speaker), 6.36 lbs. (mixer)

Manufacturer Part Number:STAGEPAS 400BT
Add to cart
Compare
Quick View
JBL EON208P Portable PA System
Portable PA Systems
₹61,999.00
Portable PA for Music, Speech, and More

The JBL EON208P is a portable PA system you can carry in one hand, and it’s perfect for solo artists, small musical groups, public speaking, DJ gigs, and more. It weighs less than 40 pounds, but its dual speakers driven with 300 total watts of power provide clear, dynamic sound with excellent projection. Solo musicians know the convenience you get from a compact all-in-one PA system, especially in smaller rooms like coffee shops or art studios. For a compact eight-channel PA system that’s easy to transport and set up, check out the JBL EON208P.
JBL EON208P Portable PA System at a Glance:

Ready for instruments, microphones, and more

Optimized sound thanks to built-in DSP

Incredibly portable and easy to set up

Ready for instruments, microphones, and more

From small acoustic groups to DJ dance parties, you’re ready to perform with the JBL EON208P portable PA. Four microphone/instrument inputs are available for musicians, each with their own Treble, Bass, and Reverb controls. Additional line inputs are available on 1/4″, RCA, and 1/8″ connectors, and there’s a stereo output for adding a monitor speaker too. You can also stream audio from your mobile device via Bluetooth – perfect for backing tracks or break music.

Optimized sound thanks to built-in DSP

It’s easy to dial in optimum sound with the JBL EON208P portable PA. An LED next to the main volume control shows you how close you are to maximum output power. To protect your speakers and ensure the best sound, a built-in DSP limiter will automatically tame harsh audio peaks. And because it’s made by JBL, you can expect clear, detailed sound from the JBL EON208P at any volume level.

Incredibly portable and easy to set up

You can carry your guitar and the JBL EON208P to the stage in just one trip. The EON208P sports a convenient carry handle, and the speakers attach to the mixer for a complete all-in-one solution. Setup is easy too – just put the speakers up on speaker poles, attach them to the mixer with speaker cables, and you’re ready to perform!

JBL EON208P Portable PA System Features:

Portable PA system with 300 total watts of power and built-in mixer

4 inputs for mics and instruments, perfect for singer/songwriters and small musical groups

Additional line-level inputs for keyboards, drum machines, and music players

Polish your sound with Treble and Bass tone controls and built-in Reverb

Clear, detailed sound in a lightweight package thanks to the Class D amplifier

Bluetooth connectivity for streaming audio from your mobile device

Perform with confidence with the JBL EON208P!

Tech Specs

Type:Portable PA System

Inputs:4 x XLR-1/4″ combo, 2 x 1/4″ (left, right), 1 x stereo RCA pair, 2 x 1/4″ (keyboards, media), 1 x 1/8″ TRS (aux in)

Outputs:2 x 1/4″ (speaker out), 1 x stereo RCA pair, 2 x 1/4″ (monitor out), 1 x 1/4″ (sub out), 1 x 1/8″ (headphones)

Bluetooth:Yes

Power Amp:2 x 150W Class D

Total Power:300W

Enclosure Material:Plastic

Mounting Options:Pole

Power Source:Standard IEC AC cable

Height:22.6″

Width:30.5″

Depth:15.7″

Weight:38.8 lbs.

Manufacturer Part Number:EON208P
Add to cart
Compare
Quick View
JBL EON ONE Compact All-In-One Rechargeable Personal PA System
Portable PA Systems
₹39,999.00
JBL EON One Compact: Play Anywhere with This Battery-powered All-in-one PA

Want to play a gig in the middle of nowhere? With the JBL EON One Compact you can — no AC power required! The JBL EON One delivers 112dB of clean, full-range audio with a low-frequency range that extends all the way down to 37.5Hz. A built-in 4-channel mixer and generous I/O options accommodate your microphones, instrument, and portable media player. Bluetooth enables you to stream audio from your mobile device. You also get an 8-band EQ and high-quality digital effects for optimizing your sound, and a 1/4” passthrough for expanding the system for larger rooms. What’s more, the JBL EON One Compact weighs a mere 17.6 pounds, so it’s light enough to carry with one hand!

Ultra-portable PA with clean, full-range sound

The EON One Compact brings JBL Professional quality audio to any gig: speaking events, movie nights, coffeehouse shows — and with its rechargeable lithium-ion battery, you can even play where there’s no AC power! JBL EON One easily fits in the space of a passenger seat, and thanks to its even weight distribution and ergonomic handle, it loads into the gig and sets up in mere seconds. Just plug in up to four signal sources, and rock on. The JBL EON One Compact’s capable amp feeds a 1” high-frequency driver and 8″ low-frequency to deliver 112dB of clean, full-range audio anywhere.

4 well-equipped channels for greater flexibility and control

JBL put some serious thought into the EON One Compact. Channels 1–2 have combo 1/4″/XLR inputs, as well as 48V phantom power for your condenser mics. You also get a 1/4” hi-Z input and one 3.5mm aux input, enabling you to connect your guitar and portable media player. An 8-band EQ, customizable via presets, is on hand to optimize your sound, along with great-sounding reverb, chorus, and delay to give your performance a pro-quality sheen. You also get a one-touch ducking feature that safeguards the clarity of every word you speak. The JBL EON One Compact’s impressive feature set offers both top-shelf sound and convenience you’re sure to appreciate.

The JBL EON One is Bluetooth-equipped for wireless music streaming

The JBL EON One Compact makes it easy to keep weddings and dance parties spontaneous by allowing you to stream music from your mobile via Bluetooth from anywhere within range. This keeps dangerous wires off the dance floor and saves you and your guests from running to the PA every few minutes to switch songs. The JBL EON One Compact even has a built-in tablet stand to keep your device within reach and two USB 3.0 ports for high-speed charging. The JBL EON One Compact even has two USB 3.0 ports for charging. Take it from us: if you’re looking for extra-clean audio, a multichannel mixer, and wireless streaming in a compact box, the JBL Professional EON Compact is it.

JBL EON One Compact Features:

120W all-in-one PA delivers 112dB of clean, full-range audio anywhere

8” low-frequency driver exhibits earth-shaking bass down to 37.5Hz

4-channel mixer makes balancing your levels a breeze

Includes 2 x 1/4”/XLR combo inputs, 1 x 1/4” hi-Z input, and 1 x 3.5mm aux input

48V phantom power for your condenser microphones

Headphone jack for private monitoring

8-band EQ, customizable via presets, for optimizing your sound

Great-sounding reverb, chorus, and delay gives your performance a pro-quality sheen

1-touch ducking feature safeguards the clarity of every word you speak

Bluetooth-equipped with USB 3.0 charging ports and tablet stand for streaming from mobile devices

Works in both vertical and stage monitor orientations

1/4” passthrough so you can link another EON One Compact to reinforce your sound for larger rooms

Weighs only 17.6 lbs., so it’s easy to transport from gig to gig

Built-in pole mount opens up more configuration options

12-hour rechargeable battery

Tech Specs

Type:Speaker PA System

Speaker Drivers:1 x 8″ LF, 1 x 1″ HF Tweeter

Number of Mixer Channels:4

Number of Mic Preamps:2

Phantom Power:Yes

EQ:2-band Channel EQ, 8-band Output EQ

Effects:Reverb, Delay, Chorus

Inputs:2 x XLR-1/4 combo (mic/line), 1 x 1/4″ (Hi-Z), 1 x 1/8″ (aux)

Outputs:1 x 1/8″ (headphones), 1 x 1/4″ TRS (pass thru)

USB:2 x Type A 3.0

Bluetooth:Yes

Total Power:120W

Frequency Response:37.55Hz-20kHz

Software:JBL Compact Connect App (iOS/Android)

Enclosure Material:Polypropylene

Mounting Options:Floor, 1.38″ Stand Mount

Battery-powered:Yes

Power Source:Standard IEC AC cable / Rechargeable Lithium battery

Height:15.71″

Width:10.04″

Depth:11.46″

Weight:17.63 lbs.

Manufacturer Part Number:EON ONE COMPACT-NA
Add to cart
Compare
Quick View
Bose S1 Pro Portable PA System
Portable PA Systems
Bose S1 Pro: An Unbeatable Battery-powered All-in-One PA

Fully loaded and weighing in at just 15 pounds, the Bose S1 Pro is the ultimate all-in-one PA for soloists, event speakers, and smaller acts. Whether you tilt it, seat it, or mount it, the Bose S1 Pro delivers rich, even coverage to an entire room, with Auto EQ to eliminate hotspots out on the floor. Two channels with independent EQ, reverb, and ToneMatch technology promise flattering reproduction of voices and instruments, while a dedicated third channel with 1/8″ aux input and one-touch Bluetooth pairing and streaming handles music playback. The Bose S1 Pro has a convenient carry handle that facilitates speedy load-ins and setups, while a factory-installed Li-ion battery gives you unmatched PA portability.
Even coverage — no hotspots

Bose sound reinforcement are known for their wide, even coverage, and the Bose S1 Pro is no exception. Sound is dispersed not just through the front of the enclosure, but the sides as well, for room-filling sound from a single unit.

The Bose S1 Pro is not just for live sound

The Bose S1 Pro is not just solid PA, but a capable wedge monitor, practice amp, and playback system as well. Whether you’re on the road, practicing at home, or streaming music for parties, you’ll always find a use for the Bose S1 Pro from us

ToneMatch technology

The Bose S1 Pro includes a streamlined version of Bose’s ToneMatch technology on channels 1 and 2. Use the microphone setting for rich, lush vocal reproduction at a touch, or the guitar setting for pre-programmed settings for your acoustic. ToneMatch can also be toggled off completely.

Factory-installed Li-ion battery

Your Bose S1 Pro includes a factory-installed Li-ion battery. Enjoy hours of powerful sound reproduction on the go, from the subway to the Siberian arctic. With Bose, no location is too remote to gig.

Bose S1 Pro All-in-one PA Features:

The ultimate portable PA for soloists, small acts, and event speakers

Lightweight — just 15 lbs. — with a convenient carry handle

Can be tilted, seated, or stand mounted (35mm pole mount)

Works great as a wedge monitor or playback system, too

No hotspots — wide dispersion and Auto EQ deliver even coverage

2 channels with independent EQ and reverb

Dedicated 3rd channel for aux input or Bluetooth streaming

ToneMatch technology offers one-touch vocal and acoustic guitar presets

Factory-installed Li-ion battery gives you hours of portable playback

Tech Specs

Type:Powered PA System

Speaker Drivers:1 x 6″ LF High Excursion woofer, 3 x 2.25″ HF drivers

Number of Mixer Channels:3

Number of Mic Preamps:2

EQ:2-band Channel EQ

Effects:Reverb

Inputs:2 x XLR-1/4″ combo, 1 x 1/8″ (aux)

Outputs:1 x 1/4″ (line out)

USB:1 x Type Micro-B (service use)

Bluetooth:Yes

Total Power:150W

Frequency Response:70Hz-16khz (±3 db)

Enclosure Material:Polypropylene Plastic

Mounting Options:1.37″ pole mount, Tilt-back, Floor Monitor

Battery-powered:Yes

Power Source:Rechargeable battery (up to 11 hour play time), Standard IEC AC cable

Height:13.1″

Width:9.4″

Depth:11.1″

Weight:15.7 lbs.

Manufacturer Part Number:787930-1120
Read more
Compare
Quick View
Behringer HA6000 Headphone Amplifier
Headphones and Earphones
₹20,999.00
A Value-packed 6-channel Headphone Amp

Does your project studio need a headphone amplifier? If so, you’ll be hard-pressed to find a better bang-for-your-buck value than Behringer’s Powerplay HA6000. The Powerplay HA6000 features six independent amplifier sections that provide up to six stereo mixes with individual Balance controls. You can adjust each section separately for “more me” mixing, and stereo auxiliary inputs for each channel make adding in any extra sound source easy. Beyond that, you can customize your individual mix, thanks to a Bass and Treble EQ on each channel. Each channel on the Powerplay HA6000 also boasts an Output Level control with 8-segment LED meter, Mono L/Mono R switches, and dual headphone outputs.
Packed with essential features

Each section on the Powerplay HA6000 is loaded with essential features. Each of its six high-power amplifiers can drive loads down to 8 ohms. Every section features its own individual 2-band EQ, 8-segment LED output meter, Mono L/Mono R switches, and a stereo auxiliary input for adding in any instrument or sound source. And, of course, each section boasts its own dedicated 1/4″ Phones Out jack. In the main section, the HA6000 has an 8-segment LED input meter, Direct In 1/4″ jack, and a Master Level knob.

All the connections you need

The Powerplay HA6000’s back panel boasts all the connections you need. Each channel features an additional 1/4″ output, allowing up to 12 pairs of headphones to listen to six separate mixes simultaneously. The back panel also boasts parallel Main outputs, making it easy to cascade multiple HA6000 units for greater listening capacity. The HA6000 features high-quality servo-balanced inputs and outputs on 1/4″ TRS and gold-plated XLR connectors.

Behringer Powerplay HA6000 Features:

6 independent amplifier sections that provide up to 6 stereo mixes with individual Balance controls

Adjust each section separately for “more me” mixing

Stereo auxiliary inputs for each channel make adding in any extra sound source easy

Bass and Treble EQ on each channel for customizing your individual mix

Each channel boasts an Output Level control with 8-segment LED meter and Mono L/Mono R switches

Each channel features an additional 1/4″ output, allowing up to 12 pairs of headphones to listen to six separate mixes simultaneously

Main section has an 8-segment LED input meter, Direct In 1/4″ jack, and a Master Level knob

Parallel Main outputs for cascading multiple units to expand your listening capacity

High-quality servo-balanced inputs and outputs on 1/4″ TRS and gold-plated XLR connectors

Tech Specs

Input Channels:1 x stereo, 6 x auxillary

Output Channels:6 x stereo mixes

Analog Inputs:2 x XLR (main), 2 x 1/4″ TRS (main), 6 x 1/4″ TRS (aux in), 1 x 1/4″ TRS (direct)

Analog Outputs:6 x 1/4″ TRS (stereo mix out), 2 x XLR (main), 2 x 1/4″ TRS (main)

Controls per Channel:Volume, Bass, Treble

Form Factor:Rackmount

Power Supply:Standard IEC AC cable

Height:1.7″

Width:19″

Depth:5.9″

Weight:4.4 lbs.

Manufacturer Part Number:HA6000
Add to cart
Compare
Quick View
Behringer Powerplay P1 Personal Wired In-Ear Monitor Amplfier
Headphones and Earphones
₹8,399.00
Need More Me?

The Behringer Powerplay P1 personal in-ear monitor amplifier puts monitor mix control into your hands. On stage, stop trying to flag down the sound engineer for your monitor mix tweaks. Instead, turn yourself up when needed. If you’re a studio engineer, the Powerplay P1’s dual inputs put the cue mix in the musician’s hands and lets you focus on the main mix. Powered by battery or optional power supply, the level and balance/mix controls give you the tools you need to create your perfect monitor mix. Incredibly useful on stage or in the studio, Behringer’s Powerplay P1 personal in-ear monitor amplifier is a budget-friendly solution to your monitoring woes.
Behringer Powerplay P1 Personal in-ear Monitor Amplifier at a Glance:

Take care of your most important instrument

Easily get “more me”

What about studio monitoring?

Take care of your most important instrumentSweetwater engineers and musicians know their primary instrument is their ears, and so is yours! By wearing in-ear monitors or headphones on stage instead of using a floor monitor, your ears are protected from screaming amps and hard-hitting drummers, and the isolation keeps your ears focused on your mix. You won’t need nearly as much volume and you’ll get a better monitoring experience. Behringer respects how important your hearing is as a performer too, so the P1 also includes a built-in limiter to protect your ears even further.

Easily get “more me”There’s nothing wrong with needing “more me” and the P1’s powerful headphone output makes sure you’ll be able to hear yourself perfectly no matter how loud things get on stage. Get the band together for rehearsal and use your digital audio mixer to dial in and save everyone’s monitor mix – cut your sound check time down to nothing and finally take advantage of all those auxiliary outputs. Dual XLR inputs give you two channels of signal that you can use in mono or stereo mode so you have the power to hear yourself and blend in the perfect amount of the band. Slip the P1 on your belt and get the best monitoring experience you’ve ever had – your band and the audience will thank you!

What about studio monitoring?The 9-volt battery operation and rugged metal chassis make the P1 perfect for stage, but what about the studio? As an engineer, the P1 puts the control of balance and volume into the hands of the musicians, leaving you to focus on the tracking. As a musician, control your mix and level without having to stop in the middle of a take. Using an optional power supply, you can set up a permanent monitoring station by mounting the device to a mic stand – run your input cables once and easily do all the cue signal routing within your DAW.

Behringer Powerplay P1 Personal In-ear Monitor Amplifier Features:

High-powered headphone output with limiter protects your ears; loud enough for drummers

Dual XLR inputs, mono or stereo operation, and Level and Balance controls give you control over your monitor mix

Convenient belt-clip and 9-volt battery with dual LED capacity indicators keeps you grooving on stage

Use with an optional power supply and mount on a standard mic stand for a permanent studio monitoring station

Bring hands-on control to your monitoring with Behringer’s Powerplay P1!

Tech Specs

Type:In-ear Monitor Amp

Input Channels:2-channel mono/Stereo

Analog Inputs:2 x XLR

Analog Outputs:1 x 1/8″ (headphones)

Form Factor:Stand Mountable

Power Source:1 x 9V battery / 9V DC power supply (sold separately)

Manufacturer Part Number:P1/B
Add to cart
Compare
Quick View
Behringer Powerplay P2 Ultra-Compact Personal In-Ear Monitor Amplifier
Headphones and Earphones
₹7,299.00
Convenient Active Volume Control for In-ears

The Powerplay P2 is the powered successor to Behringer’s completely passive PM1 personal in-ear monitor amp. The P2 delivers clear audio right to your in-ear monitors with the signal boost of an active amplifier, and it can run up to 12 hours on two AAA batteries (not included). This powerful belt- or strap-worn in-ear amp is specially designed for musicians and performers whose instruments require stationary play. Every part of the P2 is engineered to withstand the rigors of the road, from the smooth rotary volume control to the overbuilt metal enclosure and belt clip. Sweetwater reviewers were impressed with the locking XLR/TRS combo input, which helps keep foot traffic and stage mishaps from disconnecting your monitor source. The Behringer Powerplay P2 uses a standard 3.5mm output jack to drive in-ears, headphones, or earbuds, and it even features an internal switch for selecting mono or stereo use.
Behringer Powerplay P2 Personal In-ear Monitor Amplifier Features:

Delivers crystal-clear, amplified audio directly to your in-ear monitors or headphones

Built for instrumentalists and other performers who primarily play in a stationary position

Smooth volume control is built to last a lifetime

Rugged metal housing is engineered for superior durability

Belt clip keeps the P2 anchored to your belt or strap

Runs up to 12 hours on 2 AAA batteries (not included)

3.5mm output jack supports in-ear monitors, earbuds, and headphones

Locking XLR input foils stage mishaps

Stereo/mono source switch (internal)

Tech Specs

Input Channels:Stereo/Mono internal source switch

Analog Inputs:1 x XLR-1/4″ combo (line in)

Analog Outputs:1 x 1/8″ (headphones)

Manufacturer Part Number:P2
Add to cart
Compare
Quick View
Behringer Powerplay PM1 Personal In-Ear Monitor Belt-Pack
Headphones and Earphones
₹4,799.00
Passive Volume Control for Amplified In-ears

The Behringer Powerplay PM1 restores freedom of movement to the in-ear user. This completely passive box is tiny, requires no power, and lets you control your in-ear volume from your hip. Every part of the PM1 is designed to withstand the rigors of the road, from the smooth volume pot to the overbuilt metal chassis and belt clip.Reviewers were impressed with the locking XLR input, which keeps foot traffic and stage mishaps from disconnecting your monitor source. Best of all, the Behringer Powerplay PM1 uses a standard 3.5mm output jack to drive in-ears, headphones, or earbuds.

Note: the PM1 is just a level control. You’ll still need a headphone amp to drive your monitors.
Behringer Powerplay PM1 Personal In-ear Monitor Beltpack Features:

Restores freedom of movement to in-ear users

Built for singers, instrumentalists, and speakers who like to explore the stage

Smooth volume control is built to last a lifetime

Rugged metal housing is stage-proof

Belt clip keeps the PM1 anchored to your person

3.5mm output jack supports in-ear monitors, earbuds, and headphones

Locking unbalanced stereo XLR input foils stage mishaps
Tech Specs
- Type:Monitor Beltpack
- Input Channels:Single channel
- Analog Inputs:1 x XLR (line in)
- Headphones:1 x 1/8″ TRS
- Controls per Channel:Volume control
- Form Factor:Portable with belt clip
- Manufacturer Part Number:000-BKB00-00010
Add to cart
Compare
Quick View
Steinberg UR44C USB Audio Interface
Audio Interfaces & DI Boxes
Superior Connectivity Meets Portability

The Steinberg UR44C strikes the perfect balance between portability and connectivity. This 6-in/4-out USB interface delivers professional quality audio resolution with both analog and MIDI connections. The Steinberg UR44C has advanced software compatibility that allows it to work with any USB-C equipped Mac or Windows PC, or iPad Pro. Steinberg’s interfaces have a sturdy, low-profile design and stellar audio quality that’s earned them many loyal fans. Included with your Steinberg UR44C is a free download of Cubase AI and Cubasis LE, two innovative DAWs for your computer or iPad.
Capture your ideas anywhere

The Steinberg UR44C was designed to provide you with an amazing blend of connection options while remaining sleek enough to fit inside a backpack. Steinberg wanted to ensure you can capture your tracks the moment inspiration strikes. Whether you’re on the road, at a jam session, or at your home studio, just whip out the UR44C and an iPad, fire up Cubasis LE, and get going. You can then transfer your work to the full version of Cubase for mixing and mastering in your studio.

Included software for your computer or iPad

When you receive your UR44C you’ll also receive a free download of Cubase AI. Cubase AI is a sleek version of Steinberg’s Mac/Windows production software. For your iPad, you can download Cubasis LE, a full production studio with features that have been optimized for touchscreen controls. For added convenience, projects you create on Cubasis LE can be opened up in Cubase on the computer in your studio. The ability to capture ideas on the go and take them back to the studio makes using the UR44C a no-brainer.
Steinberg UR44C USB Audio Interface Features:

Four Combination XLR/TRS inputs allow for versatile connection options

Windows, Mac OS, and iOS cross-platform compatibility for superior flexibility

MIDI I/O syncs effortlessly with outside hardware

Latency-free DSP monitoring

USB 3.0 to USB-C connector can connect to most modern devices

Four Class A microphone preamps

Dual headphone monitoring capabilities

Switchable power source: USB 3.0 or 12V DC

Tech Specs

Computer Connectivity:USB 3.0

Form Factor:Desktop

Simultaneous I/O:6 x 4

Number of Preamps:4

Phantom Power:4 channels

A/D Resolution:Up to 32-bit Integer/192kHz

Effects:dspMixFx: REV-X Reverb, Sweet Spot Morphing Channel Strip, Guitar Amp Classics

Analog Inputs:2 x XLR-1/4″ combo (mic/line), 2 x XLR-1/4″ combo (mic/line/Hi-Z), 2 x 1/4″ (line)

Analog Outputs:2 x 1/4″ TRS (main out), 4 x 1/4″ (line out)

Headphones:2 x 1/4″

MIDI I/O:In/Out/USB

USB:1 x USB-C 3.1 Gen 1 (audio/MIDI)

Software:Cubase AI, Cubasis LE (iOS)

OS Requirements – Mac:macOS 10.12 or later, 4GB RAM minimum, Intel Core i3 or higher, iOS 9 or later (select software)

OS Requirements – PC:Windows 7 SP1 64-bit or later, 4GB RAM minimum, Intel Core i3 or higher

Bus Powered:Yes

Power Supply:USB bus powered (USB-C) / 12V DC power supply (included)

Height:1.85″

Width:9.92″

Depth:6.25″

Weight:3.3 lbs.

Manufacturer Part Number:UR44C
Read more
Compare
Quick View
Steinberg UR22C USB Audio Interface
Audio Interfaces & DI Boxes
Pro-level Interface for Mac, PC, and iPad

In a market saturated with USB interfaces for home recording, Steinberg’s UR22C stands out from the crowd. This USB interface showcases top-notch build quality and high-definition audio along with advanced connectivity that make it the perfect interface for the masses. Want to plug into a Mac or PC using USB 3.0? It’s got you covered. Recording your mixtape on your iPad or other USB-C device? Not a problem. The UR22C has flexible I/O options, thanks to its dual mic/line inputs, switchable phantom power, MIDI I/O, and TRS main outputs. Steinberg has gone all-out designing the UR22C USB Interface to provide you with a pro-level recording experience no matter what gear you’re using.

Versatile connection options for any rig

The UR22C was designed to be compatible with nearly any rig. This compact interface supports Core Audio, AISO, and WDM standards. This allows you to use the Steinberg UR22C with any DAW supporting these universal standards — a feature that’s appreciated r. For power, you can choose between USB 3.0 and 5V DC.

Included software for your computer or iPad

When you receive your UR22C, you’ll receive a free download of Cubase AI. Cubase AI is a light version of Steinberg’s Mac/Windows production software. For your iPad, you can download Cubasis LE, a full production studio with features that have been optimized for touchscreen control. For added convenience, projects you create on Cubasis LE can be opened up in Cubase on your studio computer. The ability to capture ideas on the go and take them back to the studio make using the UR22C a no-brainer.
Steinberg UR22C USB Audio Interface Features:

Windows, macOS, and iOS cross-platform compatibility for superior flexibility

Class-A D-PRE microphone preamps with +48V phantom power

Dual combination inputs support instruments and mic connections

USB 3.0 to USB-C connector can connect to most modern devices

Latency-free monitoring has mix balance controls

MIDI I/O allows you to synch with outboard hardware

Separate headphone level control

Switchable power source: USB 3.0 or 9V DC

Tech Specs

Computer Connectivity:USB 3.0

Form Factor:Desktop

Simultaneous I/O:2 x 2

Number of Preamps:2

Phantom Power:2 channels

A/D Resolution:Up to 32-bit Integer/192kHz

Effects:dspMixFx: REV-X Reverb, Sweet Spot Morphing Channel Strip, Guitar Amp Classics

Analog Inputs:1 x XLR-1/4″ combo (mic/line), 1 x XLR-1/4″ combo (mic/line/Hi-Z)

Analog Outputs:2 x 1/4″ TRS (main out)

Headphones:1 x 1/4″

MIDI I/O:In/Out/USB

USB:1 x USB-C 3.1 Gen 1 (audio/MIDI), 1 x Type Micro-B (power)

Software:Cubase AI, Cubasis LE (iOS)

OS Requirements – Mac:macOS 10.12 or later, 4GB RAM minimum, Intel Core i3 or higher, iOS 9 or later (select software)

OS Requirements – PC:Windows 7 SP1 64-bit or later, 4GB RAM minimum, Intel Core i3 or higher

Bus Powered:Yes

Power Supply:USB bus powered (USB-C) / 5V DC power adapter (sold separately)

Height:1.85″

Width:6.25″

Depth:6.25″

Weight:2.2 lbs.

Manufacturer Part Number:UR22C
Read more
Compare
Quick View
Behringer U-Phoria UMC1820 USB Audio Interface
Audio Interfaces & DI Boxes
₹29,999.00
USB Interface with Plenty of I/O

If you need lots of I/O for your home studio, the Behringer U-PHORIA UMC1820 USB 2.0 audio interface is worth a look. With 18 inputs and 10 outputs, the U-PHORIA UMC1820 gives you plenty of options for connecting your synths and outboard gear. Add eight Midas-designed mic pres and high-resolution 24-bit/96kHz converters to the mix, and you have yourself a complete studio in a box. Not enough I/O? Connect a Behringer ADA8200 to the U-PHORIA UMC1820’s ADAT input and expand to a total of 16 preamps. Have questions? Our Sales Engineers receive ongoing product training on nearly everything we sell. Give us a call, and we’ll point you in the right direction!
Behringer U-PHORIA UMC1820 USB 2.0 Audio Interface at a Glance:

Ample I/O provides extensive connectivity

Midas-designed mic preamps deliver high-quality audio reproduction

Direct monitoring for zero-latency cue mixes

Ample I/O provides extensive connectivityThe U-PHORIA UMC1820 provides 18 inputs and 20 outputs, as well as MIDI I/O, enough to connect and sync all of your favorite synths, modules, compressors, external mic pres, and whatever else you have lying around. The U-PHORIA UMC1820’s TRS, RCA, and XLR outputs ensure that you have your analog playback options covered. With support for S/PDIF, ADAT, and S/MUX digital formats, the U-PHORIA UMC1820 lets you use all three signals simultaneously, allowing for plenty of expansion.

Midas-designed mic preamps deliver high-quality audio reproductionIncorporating Midas-designed mic pres, the U-PHORIA UMC1820 allows you to record vocals or acoustic instruments directly into your DAW with surprising clarity. The U-PHORIA UMC1820 includes +48-volt phantom power for your condenser microphones and sufficient gain for your dynamic mics. On top of that, high-resolution 24-bit/96kHz converters ensure that what goes into your U-PHORIA UMC1820 is captured with accuracy.

Direct monitoring for zero-latency cue mixesIt’s no secret that when artists can hear their performance with no delay or lag, they perform better. The U-PHORIA UMC1820’s zero-latency direct monitoring ensures that technology will never get in the way of a great performance. Additionally, the U-PHORIA UMC1820 features dual headphone outputs with separate level controls and monitor A/B source select for DJ-style cueing.

Behringer U-PHORIA UMC1820 USB 2.0 Audio Interface Features:

Midas-designed mic preamps deliver high-quality audio reproduction

24-bit/96kHz resolution for professional audio quality

Ample I/O provides extensive connectivity

Simultaneous use of all signals allows for plenty of expansion

Direct monitoring for zero-latency cue mixes

Dual headphone outputs with individual level controls and monitor A/B source select for DJ-style cueing

High-quality components and rugged construction ensure long life

The Behringer U-PHORIA UMC1820 is a great all-around audio interface!
Add to cart