Shop

Showing 781–792 of 908 results

Compare
Quick View
Soundcraft Notepad 8FX Analog Mixing Console
Analog Mixing Consoles
₹11,499.00
Compact Mixer with Lexicon Effects

From personal mixing to podcasting, Soundcraft’s Notepad-8FX delivers the quality and convenience you need in a compact and pocketbook-friendly fashion. With the inclusion of USB connectivity, the Notepad-8FX lets you easily bring the sound from Soundcraft to the live stage and the home studio. The Notepad-8FX includes two of Soundcraft’s acclaimed microphone preamplifiers, which offer clear sound and tons of headroom — exactly what you need for voice-over work and other applications where your voice is the center of attention. It also includes a direct input, which lets you plug in your bass or guitar. Top it off with a 2-band EQ plus two stereo channels for your line-level gear, and the Notepad-8FX is everything you could want in a mixer that’s small enough to go anywhere.
Equipped with two versatile Soundcraft preamps

Live sound engineers have long counted on Soundcraft to deliver clear sound onstage, and a lot of that has to do with their mic pres. While there’s +48-volt phantom power onboard for your condenser mics, the two high-headroom preamps included on your Notepad-8FX deliver plenty of gain for even the most sluggish of dynamic microphones, with enough gain leftover to handle sudden level spikes that can sneak up on you onstage or in the studio. An instrument-level input on channel 1, along with stereo inputs on the other three channels, let you plug in a guitar, keyboard, or another instrument as well as a vocal mic, making the Notepad-8FX ideal for singer/songwriters.

USB delivers recording and performance possibilities

For a lightweight portable mixer, the Notepad-8FX certainly doesn’t fall short where I/O is concerned. You get XLR combo jacks, 1/4″ inputs, and RCA line inputs. On the output side, there’s a pair of XLR outputs that feed the mains (perfect for PA systems and studio monitors), a 1/4″ aux output, and a switchable main/aux headphone jack. USB turns the Notepad-8FX into even more of a mini-workhorse mixer, by providing a direct connection to your computer. This allows it to act as a 2-in/2-out USB audio interface, making it easy to record into your DAW. It also lets you stream audio from your computer, which you can use to play backing tracks or to inject your favorite virtual instruments right into the PA.

Sweeten your sound with Lexicon digital effects

In addition to handy 3-band EQs and 100Hz highpass filters on the two preamp-equipped channels, the Notepad-8FX offers you a selection of genuine Lexicon effects you can use to enhance your sound. These effects include a dimensional delay, a rich chorus, and a spacious reverb. Each effect features an adjustable parameter (length for the delay and reverb, intensity for the chorus) that you can tweak with just the twist of a knob, while tap tempo lets you keep your effects locked to the beat.

Soundcraft Notepad-8FX Compact Mixer Features:

A compact 8-channel mixer that’s great for mixing onstage or recording in your home studio

Includes 2 microphone preamplifiers with phantom power, 100Hz highpass filters, and 3-band EQs

Channel 1 includes a hi-Z instrument-level input for running guitar or bass direct

Line-level inputs on 3 additional channels accommodate keyboards, playback devices, and consumer music gear

Onboard Lexicon digital effects include delay, chorus, and reverb

Tap tempo and a parameter adjustment knob let you dial in each effect to your material

USB provides 2-in/2-out connectivity for recording and audio streaming

Outputs include flexible monitoring options and balanced XLR main outs

Tech Specs

Type:Analog Mixer with USB interface

Channels:8

Computer Connectivity:USB (2 x 2)

Faders:1 x master fader

Inputs – Mic Preamps:2 x XLR-1/4″ combo (mic/line, 1 x Hi-Z)

Phantom Power:Yes

Inputs – Line:4 x 1/4″ (2 x stereo), 2 x RCA

Outputs – Main:2 x XLR (master)

Aux Sends:1 x 1/4″ (Aux/FX)

Headphones:1 x 1/4″

USB:1 x Type B

EQ Bands:3-band EQ

Effects:Lexicon Delay, Chorus, Reverb

OS Requirements – Mac:OS X 10.10 or later

OS Requirements – PC:Windows 7 SP1 or later (with Soundcraft driver)

Power Source:External power supply

Height:3.2″

Width:8.5″

Depth:9″

Weight:3.0 lbs.
Add to cart
Compare
Quick View

Turbosound iNSPIRE iP1000 V2 All-in-One Linear Array Portable PA System
Portable PA Systems

iNSPIRE iP1000 V2

Although we refer to it as a “column” loudspeaker, the INSPIRE iP1000 delivers the powerful, high-quality sound and optimised dispersion inspired by our award-winning line array products – in a surprisingly lightweight and easy to use, all-in-one form factor. Thanks to an on-board 3-channel digital mixer and multichannel 1,000-Watt Class-D amplifier driving a custom-engineered dual 8″ subwoofer, 8 x 2.75″ neodymium drivers, and a horn loaded super tweeter, the iP1000 is ideally-suited for small to medium-sized performance venues, houses of worship, boardroom presentations, nightclubs, and much more.

The iP1000 is lightweight: only 24.8 kg (54.7 lbs) and features industry-leading KLARK TEKNIK Digital Sound Processing (DSP), studio-grade stereo reverb, Class-D amplifier and Spatial Sound technologies – plus convenient Bluetooth stereo audio streaming and iPhone/iPad remote control.

Detailed Product Information
Compare
Quick View
Turbosound iNSPIRE iP3000 All-in-One Linear Array Portable PA System
Portable PA Systems
Modular column loudspeaker for portable PA applications and high quality music playback

Klark Teknik’s revolutionary SST (Spatial Sound Technology) for creating 3D acoustic environments

Extremely wide sound dispersion provides consistent sound to the audience and performers

2,000 Watt power, multi-channel Klark Teknik Class-D technology

3 channel digital mixer with gain setting recall

Studio-grade stereo reverb adds finishing touch to your sound

Comprehensive remote control via Apple iPhone/iPad*

Although we refer to it as a “column” loudspeaker, the INSPIRE iP3000 delivers the powerful, high-quality sound and optimised dispersion inspired by our award-winning line array products – in a an easy to use, all-in-one form factor. Thanks to an on-board 3-channel digital mixer with reverb and a multichannel 2,000-Watt Class-D amplifier driving a customengineered dual 12″ subwoofer, 16 x 3.5″ neodymium drivers, and dual horn loaded super tweeters, the iP3000 is ideally-suited for medium to largesized performance venues, houses of worship, boardroom presentations, nightclubs, and much more.

The iP3000 features industry-leading KLARK TEKNIK Digital Sound Processing (DSP), Class-D amplifier and Spatial Sound technologies – plus convenient Bluetooth stereo audio streaming and iPhone/iPad remote control.
Detailed Product Information
Compare
Quick View
AKG C1000S MK4 Condenser Instrument Microphone
Wired Microphones
₹17,999.00
Ideal Condenser for Studio and Mobile Use

Grab the updated AKG C1000 S MK4 and see what you’ve been missing. Sales Engineers have long recommended the C1000 S to project studio engineers and field recording specialists for years because of its clarity and versatility, and this updated version is more versatile than ever. Switchable capsule caps provide cardioid and hypercardioid polar pattern, plus an optional gain boost, while the addition of a switchable pad and highpass filter let you tailor the frequency response to a wide range of applications. You can power the C1000 S MK4 with a pair of AA batteries for up to 120 hours, making it a great companion for your mobile recording. What’s more, the internally shockmounted capsule has been redesigned with gold-plating to resist rust and corrosion.

AKG C1000 S MK4 Condenser Microphone at a Glance:

Great for mobile recording or live sound with phantom or battery power

Cardioid pattern can be quickly switched to hypercardioid

Switchable pad and highpass filter for added flexibility

Great for mobile recording or live sound with phantom or battery power

The versatility of the C1000 S MK4 makes this an extremely popular model, and one ideally suited for all kinds of recording and live sound applications. If no phantom power is available, the mic can be powered by two standard AA batteries, making it perfect for mobile use. With its new battery monitoring electronics, the C1000 S MK4 features a reliable LED warning light. The red LED above the microphone switch lights up when the C1000 S MK4’s remaining battery life falls below 45 minutes. You’ll never be caught with a useless mic in situations where phantom power is not available!

Cardioid pattern can be quickly switched to hypercardioid

Many of us here have used C1000 S models since they first came out, and they’re wonderful mics for acoustic guitar, percussion, and even certain types of vocals. One of the things that makes this mic particularly versatile is its switchable diaphragm cabs, which let you choose between cardioid and hypercardioid polar patterns, or add a presence boost. With the presence boost adapter in place, you get an extra 3-5dB of high-end enhancement between 5kHz and 9kHz, which can be a real asset if you’re using your C1000 S MK4 for ENG or interview applications.

Switchable pad and highpass filter for added flexibility

One of the most surprising things about the C1000 S MK4 revision is the addition of both a highpass filter and a pad. While you won’t find these controls on the outside of the mic, they’re accessible via the battery compartment, where you can’t accidentally switch the setting during run-and-gun recording. The highpass filter is set at 80Hz, which is perfect for cutting out handling noise (already mitigated by the internal spider shockmount) and proximity effect. That’s particularly useful when you hand the mic to an inexperienced speaker for ENG applications. Likewise, there’s a switchable -10dB pad onboard, which can save you from preamp overloads if you’re recording loud drums or guitar cabinets.

AKG C1000 S MK4 Condenser Microphone Features:

A highly versatile small-diaphragm condenser microphone for mobile and studio use

Great for acoustic guitar and percussion as well as speech and vocals

Runs on 2 AA batteries for up to 120 hours for mobile/ENG applications

Internally shockmounted gold-plated capsule resists corrosion and handling noise

Switchable diaphragm caps let you choose from cardioid or hypercardioid polar patterns

Presence Boost cap lets you add a 3-5dB boost between 5-9kHz for speech clarity

Cut proximity effect and handling noise with the internally switchable 80Hz highpass filter

Prevent preamp overloading with the internally switchable -10dB pad

Recessed on/off switch lets you quickly cut the mic when needed

Also includes a foam windscreen, stand adapter, and carry bag

The AKG C1000 S MK4 condenser mic is great for studio and mobile recording!
Add to cart
Compare
Quick View
JBL CBT100LA-1 Line Array Column Speakers
Installed Sound & Others
₹56,999.00
Amazingly Balanced Sound for Any Room or Theater
The JBL CBT 100LA-1 passive speaker uses JBL’s breakthrough Constant Beamwidth Technology to produce a column speaker with incredibly balanced projection across a large area. Passive column speakers normally create inconsistencies in sound when you move about the room, but not the CBT 100LA-1! JBL’s patent-pending design uses an array of 16 full-range 2″ drivers with 325 watts of power capacity, and the result is consistent, natural sound coverage – both horizontally and vertically. You can even tailor the vertical dispersion to optimize the sound to any room! Perfect for large rooms like churches, school auditoriums, and theaters, the CBT 100LA-1 is easy to install as well as easy to optimize for your room. Call us today to find out how you can integrate the JBL CBT 100LA-1 passive speakers into your live sound system!

JBL CBT 100LA-1Passive Speaker at a Glance:
- Innovative design for superior sound coverage
- Perfect for performance and speech
- Easy to install
Innovative design for superior sound coverageThe JBL CBT 100LA-1 handles up to 325 watts of power to drive an array of 16 full-range 2″ speakers. That may not seem like much, but 10 years of research have created a column speaker that uses analog delay beam-forming and amplitude tapering to make sure directivity is even across the CBT 100LA-1’s extended 80Hz-20kHz frequency range. The result is even, balanced sound without frequency lobing inconsistencies as you move around the coverage area. Best of all, you can switch between 40-degree vertical dispersion (for medium-throw coverage in smaller rooms) and 15-degree vertical dispersion (for long-throw coverage in larger rooms).

Perfect for performance and speechAny place you need clear, balanced sound that covers a large area well, the JBL CBT 100LA-1 will deliver. Switchable voicings let the CBT 100LA-1 use a flat frequency response for music playback, as well as a speech mode with a midrange presence boost. It’s ideal for school auditoriums and churches, allowing your message to be heard clearly throughout the room. Anywhere you have a large room that requires lots of coverage without the compromise of dead spots or frequency lobing, the CBT 100LA-1 is ready to perform.

Easy to installJBL’s CBT 100LA-1 column speakers come with a swiveling wall bracket, and also have 10 threaded insert points on the rear of the fiberglass reinforced ABS cabinet. Contractors love how easy it is to install the CBT series, and it’s easy to position them for the maximum coverage in your room. Call us to find out more about how to integrate the CBT 100LA-1 into your sound system!

JBL CBT 100LA-1 Passive Speaker Features:

Passive column speaker for installation with incredibly balanced horizontal and vertical directivity

325W RMS power handling 2 hours continuous operation, 200W RMS power handling 100 hours continuous

80Hz-20kHz frequency range is perfect for both music or speech

Switchable voicing adds a presence boost for speech applications

SonicGuard overload protection prevents distortion

Built-in 70V/100V transformer, and 8 ohm direct capability, for flexible installation

Color: Black

Fill your room with exceptional sound, with the JBL CBT 100LA-1 passive speaker!
Add to cart
Compare
Quick View
JBL CBT50LA-1 Line Array Column Speakers
Installed Sound & Others
₹40,999.00
Amazingly Balanced Sound for Large Rooms
The JBL CBT 50LA-1 passive speaker uses JBL’s breakthrough Constant Beamwidth Technology to produce a column speaker with incredibly balanced projection across a large area. Passive column speakers normally create inconsistencies in sound when you move about the room, but not the CBT 50LA-1! JBL’s patent-pending design uses an array of eight full-range 2″ drivers with 150 watts of power capacity, and the result is consistent, natural sound coverage – both horizontally and vertically. Perfect for large rooms like churches, school auditoriums, and theaters, the CBT 50LA-1 is easy to install as well as easy to optimize for your room. Call us today to find out how you can integrate the JBL CBT 50LA-1 passive speakers into your live sound system!
JBL CBT 50LA-1Passive Speaker at a Glance:

Innovative design for superior sound coverage

Perfect for performance and speech

Easy to install

Innovative design for superior sound coverageThe JBL CBT 50LA-1 handles 150 watts of power to drive an array of eight full-range 2″ speakers. That may not seem like much, but 10 years of research have created a column speaker that uses analog delay beam-forming and amplitude tapering to make sure directivity is even across the CBT 50LA-1’s extended 80Hz-20kHz frequency range. It’s new technology, and the result is even, balanced sound without frequency lobing inconsistencies as you move around the coverage area.

Perfect for performance and speechAny place you need clear, balanced sound that covers a large area well, the JBL CBT 50LA-1 will deliver. Switchable voicings let the CBT 50LA-1 use a flat frequency response for music playback, as well as a speech mode with a midrange presence boost. It’s ideal for school auditoriums and churches, allowing your message to be heard clearly throughout the room. Anywhere you have a large room that requires lots of coverage without the compromise of dead spots or frequency lobing, the CBT 50LA-1 is ready to perform.

Easy to installJBL’s CBT 50LA-1 column speakers come with a swiveling wall bracket, and also have 10 threaded insert points on the rear of the fiberglass reinforced ABS cabinet. Contractors love how easy it is to install the CBT series, and it’s easy to position them for the maximum coverage in your room. Call us to find out more about how to integrate the CBT 50LA-1 into your sound system!

JBL CBT 50LA-1 Passive Speaker Features:

Passive column speaker for installation with incredibly balanced horizontal and vertical directivity

150W RMS power handling 2 hours continuous operation, 100W RMS power handling 100 hours continuous

80Hz-20kHz frequency range is perfect for both music or speech

Switchable voicing adds a presence boost for speech applications

SonicGuard overload protection prevents distortion

Built-in 70V/100V transformer, and 8 ohm direct capability, for flexible installation

Color: Black

Fill your room with exceptional sound, with the JBL CBT 50LA-1 passive speaker!
Tech Specs
- Powered:No
- Speaker Size:8 x 2″
- Power Rating:150W
- Total Power:600W
- Impedance:8 ohms
- Frequency Range:80Hz-20kHz (-10dB)
- Maximum Peak SPL:121dB
- Horizontal Coverage Angle:150 Degrees
- Vertical Coverage Angle:20 Degrees
- Enclosure Material:Fiberglass reinforced ABS cabinet
- Mounting Options:Wall Mount (hardware included), Multiple Fly Points
- Height:20.8″
- Width:3.9″
- Depth:6″
- Weight:9 lbs.
- Manufacturer Part Number:CBT 50LA-1
Add to cart
Compare
Quick View
JBL CBT70J-1 Line Array Column Speakers
Installed Sound & Others
₹97,999.00
Amazingly Balanced Sound for Any Room or Theater
The JBL CBT 70J-1 passive speaker uses JBL’s breakthrough Constant Beamwidth Technology to produce a column speaker with incredibly balanced projection across a large area. Passive column speakers normally create inconsistencies in sound when you move about the room, but not the CBT 70J-1! JBL’s patent-pending design uses an array of four 5″ LF drivers and sixteen 1″ HF drivers, and the result is consistent, natural sound coverage – both horizontally and vertically. You can even tailor the vertical dispersion to optimize the sound to any room! Perfect for large rooms like churches, school auditoriums, and theaters, the CBT 70J-1 is easy to install as well as easy to optimize for your room. Call us today to find out how you can integrate the JBL CBT 70J-1 passive speakers into your live sound system!
Innovative design for superior sound coverage

The JBL CBT 70J-1 handles up to 500 watts of power to drive an array of four 5″ LF drivers and sixteen 1″ HF drivers. 10 years of research have created a column speaker that uses analog delay beam-forming and amplitude tapering to make sure directivity is even across the CBT 70J-1’s extended 60Hz-20kHz frequency range. The result is even, balanced sound without frequency lobing inconsistencies as you move around the coverage area. Best of all, you can switch between 45-degree vertical dispersion (for medium-throw coverage in smaller rooms) and 25-degree vertical dispersion (for long-throw coverage in larger rooms).

Perfect for performance and speech

Any place you need clear, balanced sound that covers a large area well, the JBL CBT 70J-1 will deliver. Switchable voicings let the CBT 70J-1 use a flat frequency response for music playback, as well as a speech mode with a midrange presence boost. It’s ideal for school auditoriums and churches, allowing your message to be heard clearly throughout the room. Anywhere you have a large room that requires lots of coverage without the compromise of dead spots or frequency lobing, the CBT 70J-1 is ready to perform.

Easy to install

JBL’s CBT 70J-1 column speakers come with a swiveling wall bracket, and also have 10 threaded insert points on the rear of the fiberglass reinforced ABS cabinet. Contractors love how easy it is to install the CBT series, and it’s easy to position them for the maximum coverage in your room. Call us to find out more about how to integrate the CBT 70J-1 into your sound system!

JBL CBT 70J-1 Passive Speaker Features:

Passive column speaker for installation with incredibly balanced horizontal and vertical directivity

500W RMS power handling 2 hours continuous operation, 350W RMS power handling 100 hours continuous

60Hz-20kHz frequency range is perfect for both music or speech

Switchable voicing adds a presence boost for speech applications

SonicGuard overload protection prevents distortion
Add to cart
Compare
Quick View
Rode NT2A Recording Microphone
Recording Microphones
₹40,499.00
A Legend Is Reborn – with Cool Extras!

The Rode NT2-A is a professional large capsule (1″) condenser studio microphone with variable pick-up pattern, variable highpass filter and variable pad. These features provide greater creative control and versatility. Three 3-position switches located on the mic body provide the freedom to step from Figure 8, Cardioid or Omni polar pick-up patterns; from a flat response to either 40Hz or 80Hz highpass filter, and a Pad adjustment of 0dB, -5dB or -10dB attenuation. The heart of the NT2-A is the Australian-designed and -manufactured TYPE HF1 dual diaphragm capsule. The frequency and transient response of this new transducer has been voiced to complement today’s modern recording techniques yet still evoke the silky smooth character of legendary microphones of the 50’s and 60’s. And just to make the NT2 A Studio Solution a home run, RODE is including a shockmount, cable, dust cover, and tutorial DVD! What an incredible deal!
Rode NT2-A Features:

The Australian designed and manufactured HF1 1″ edge terminated, gold sputtered, dual 5 um diaphragm capsule.

3-position variable polar pattern: Omni, Cardioid & Figure 8; all controlled on the mic.

3-position variable highpass filter: Flat, 80Hz or 40Hz.

3-position variable pad: 0dB, -5dB or -10dB.

Ultra low noise, transformerless SMT circuitry.

Wide dynamic range.

High strength heat-treated steel mesh head.

Durable satin nickel finish.

Internal capsule shock mounting.

Supplied complete with soft pouch and clip.

Designed and manufactured in Sydney, Australia.

SM6 Shockmount

XLR Cable

Microphone Dust Cover

Exclusive NT2-A Recording Techniques DVD w/John Merchant

Requires +48V phantom power

Tech Specs

Microphone Type:Condenser

Polar Pattern:Cardioid, Omni, Figure-8

Diaphragm Size:1″ (25.4mm)

Frequency Response:20Hz-20kHz

Max SPL:147dB

Output Impedance:200 ohms

Self Noise:7dB (A weighted)

Low Cut Filter:40Hz, 80Hz

Pads:-5dB, -10dB

Color:Silver

Connector:XLR

Weight:1.9 lbs.

Included Accessories:Shock Mount, Pop Filter, 20′ Mic Cable, Dust Cover

Manufacturer Part Number:NT2-A
Add to cart
Compare
Quick View
Rode NTG2 Shotgun Microphone
Wired Microphones
₹26,999.00
Put RØDE Sound Quality into Your Video or Film Project!
You know you can count on RØDE for an outstanding mic at a great price. And that extends to film and video work! When you need a quality shotgun mic that’s built to perform, you want RØDE’s NTG-2. It’s lightweight, so you’ll have no problems using it as a camera-mounted mic or on a boom pole. The NTG-2 also sounds absolutely great, thanks to its wide frequency range and tight supercardioid pickup pattern. Want tough? It’ll take what you can dish out and keep sounding fantastic, in any environment. Want flexibility? This mic can be phantom powered or you can run it off of a battery. The NTG-2 comes complete with a mount and a handy windshield.

RØDE NTG-2 Supercardioid Shotgun Microphone Features at a Glance:
- Supercardioid
- Frequency Range: 20Hz-20kHz selectable HPF @ 80Hz/12dB octave
- Maximum SPL: 131dB
- Broadcast sound quality
- Rugged metal contruction
- Condenser microphone transducer
- Weighing 161 grams approx. (5.17 oz.)
- Low noise circuitry
- Low handling noise
- Supplied with stand mount and zip pouch
- Designed and manufactured in Australia
- Full 2-year guarantee
Put RØDE quality into your video or film project, with the NTG-2 shotgun mic!
Tech Specs
- Microphone Type:Shotgun Condenser
- Polar Pattern:Supercardioid
- Frequency Response:20Hz-20kHz
- Max SPL:131 dB
- Output Impedance:250 ohms (350 ohms w/Battery)
- Signal to Noise Ratio:76dB (A weighted)
- Self Noise:18dB (A weighted)
- Low Cut Filter:80Hz
- Power:Phantom Power, Battery (1 x 1.5V AA)
- Connector:XLR
- Length:10.94″
- Weight:0.36 lbs.
- Included Accessories:Stand Mount, Windscreen, Carry Bag
- Manufacturer Part Number:NTG2
Add to cart
Compare
Quick View
Sennheiser e614 Condenser Instrument Microphone
Wired Microphones
₹17,499.00
Sennheiser Super Microphone!

The e614’s super-cardioid pattern, in combination with a neutral response and moderate sensitivity, insures optimum isolation from other instruments on stage. Unobtrusive for precise placement and powered by external phantom power, the e614 tolerates extremely high SPLs, precisely capturing cymbals and hi-hats like no other mic in its price range.

Extremely wide frequency range. Focused pick-up. Outstanding transient response. As a condenser microphone, the e 614 convinces in demanding scenarios with a natural, full sound. Its wide frequency range captures nearly every instrument; its extraordinary dynamics conjure fine nuances from the air, giving them space and depth.
Thanks to the precise directivity, the e 614 safely reduces the bleed from other instruments on stage or in the studio. With its high maximum sound pressure level, it is especially designed for percussion and as an overhead mic, but also effortlessly supports stringed and woodwind instruments.

Key Features
- Condenser microphone
- Excellent directivity over the entire frequency range (40-20,000 Hz)
- Natural sound for flexible applications
- Designed for high sound pressure levels
- Rugged and ready for the road
Tech Specs
- Microphone Type:Condenser
- Polar Pattern:Supercardioid
- Frequency Response:40Hz-20kHz
- Max SPL:139dB
- Output Impedance:50 ohms
- Self Noise:24dB (A weighted)
- Connector:XLR
- Weight:0.2 lbs.
- Included Accessories:Mic Clip, Carrying Pouch
- Manufacturer Part Number:009895
Add to cart
Compare
Quick View
Sennheiser e914 Condenser Instrument Microphone
Wired Microphones
₹28,999.00
Small-diaphragm Condenser from Sennheiser!

The e914 is a high-grade condenser microphone for very demanding applications. Its outstanding sound properties qualify the e914 for highly sophisticated applications like acoustic guitars, cymbals, percussion, overhead, orchestras, and grand pianos.

Sennheiser e914 Features:
- Exceptionally lively, clear sound
- Three-position sensitivity switch
- Three-position bass roll-off/cut-off switch
- Very high sound pressure handling capability
- Requires +48V phantom power
Tech Specs
- Microphone Type:Condenser
- Polar Pattern:Cardioid
- Diaphragm Size:0.55″ (14mm)
- Frequency Response:20Hz-20kHz
- Max SPL:137dB (157dB w/Pads)
- Output Impedance:100 ohms
- Self Noise:19dB (A weighted)
- Pads:-10dB, -20dB
- Connector:XLR
- Weight:0.44 lbs.
- Included Accessories:Mic Clip, Windscreen, Microphone Pouch
- Manufacturer Part Number:500206
Add to cart
Compare
Quick View
Shure BLX1288/CVL Dual Hand-Lapel Wireless Microphone
Wireless Microphones
₹67,999.00
Wireless Freedom for Two
The Shure BLX1288/CVL wireless system equips two people for wireless freedom, while offering rock-solid build quality and easy setup and operation. And thanks to Shure’s cutting-edge QuickScan technology, frequency-selection hassles are a thing of the past, helping you get your show up and running that much faster. This system includes two microphones — the CVL lavalier microphone and the BLX2/PG58 handheld mic with built-in transmitter — as well as a BLX1 bodypack transmitter for the lav mic, and the BLX88 dual-channel receiver. When you need to perform with the freedom that only wireless allows, Shure’s BLX wireless systems are a smart, affordable choice. Enjoy legendary Shure sound and performance — take the stage confidently with the Shure BLX1288/CVL wireless system.
Convenient and easy to use

Providing up to 14 hours of use with two AA batteries, Shure’s BLX Series transmitters let you perform with confidence that the show will go on. And when it comes to frequency selection, the live sound gurus here swear by the fast, convenient frequency matching afforded by the Shure BLX’s group and channel selection buttons.

Ready to rock, right out of the box

If you’re ready to go wireless, Shure’s BLX wireless systems are a smart, affordable choice. Take the stage confidently, backed up by Shure’s legendary microphones, decades of wireless design experience, and tour-tested build quality. Available in a broad selection of bodypack and handheld configurations, BLX vocal, guitar, headset, and presenter systems are ready to rock, right out of the box.

Versatile and expandable

Shure’s BLX wireless platform supports up to 12 simultaneous wireless channels (dependent on the local wireless traffic conditions), giving you room to grow as you need to add channels in the future.

Shure BLX1288/CVL Dual-channel Wireless Microphone System Features:

User-friendly, high-performance wireless system

BLX wireless supports up to 12 simultaneous channels

BLX88 dual-channel receiver with easy one-touch setup

BLX2/PG58 handheld microphone with built-in transmitter for vocalists and public speaking

CVL lavalier microphone is ideal for interviews and theater performances

Tech Specs

Configuration:Complete System

System: Simultaneous Channels:Up to 12

System: Analog/Digital:Analog

System: Frequency Range:542-572 MHz

System: Operating Range:300 ft. Line-of-sight

System: Frequency Response:50Hz-15kHz

System: Microphone Included:Yes

System: Channel Selection:Auto/Manual

Microphone: Type:Handheld Dynamic, Lavalier Condenser

Microphone: Polar Pattern:Handheld Cardioid, Lavalier Cardioid

Microphone: Max SPL:139dB SPL

Microphone: Size:8.8″ x 2″ (handheld)

Microphone: Connector:TA4F

Microphone: Color:Black

Microphone: Frequency Response:50Hz-20kHz

Microphone: Cable Length:4.27 ft.

Microphone: Self Noise:22dB

Transmitter: Form Factor:Handheld, Bodypack

Transmitter: Dynamic Range:117dB (A weighted)

Transmitter: Battery Type:2 x AA

Transmitter: Battery Life:Up to 14 hours

Transmitter: Connector:TA4M

Transmitter: Dimensions:4.3″ x 2.5″ x 02.8″

Transmitter: Weight:0.16 lbs.

Receiver: Antenna Type:Fixed

Receiver: Signal/Noise Ratio:117dB (A-weighted)

Receiver: Type:Table Top

Receiver: Front Panel Display:Yes

Receiver: Displays:LED

Receiver: Outputs:2 x XLR, 2 x 1/4″

Receiver: Dimensions:1.5″ x 12.13″ x 3.98″

Receiver: Weight:0.94 lbs.
Add to cart