Shop

Showing 793–804 of 918 results

Compare
Quick View
JBL CBT100LA-1 Line Array Column Speakers
Installed Sound & Others
₹56,999.00
Amazingly Balanced Sound for Any Room or Theater
The JBL CBT 100LA-1 passive speaker uses JBL’s breakthrough Constant Beamwidth Technology to produce a column speaker with incredibly balanced projection across a large area. Passive column speakers normally create inconsistencies in sound when you move about the room, but not the CBT 100LA-1! JBL’s patent-pending design uses an array of 16 full-range 2″ drivers with 325 watts of power capacity, and the result is consistent, natural sound coverage – both horizontally and vertically. You can even tailor the vertical dispersion to optimize the sound to any room! Perfect for large rooms like churches, school auditoriums, and theaters, the CBT 100LA-1 is easy to install as well as easy to optimize for your room. Call us today to find out how you can integrate the JBL CBT 100LA-1 passive speakers into your live sound system!

JBL CBT 100LA-1Passive Speaker at a Glance:
- Innovative design for superior sound coverage
- Perfect for performance and speech
- Easy to install
Innovative design for superior sound coverageThe JBL CBT 100LA-1 handles up to 325 watts of power to drive an array of 16 full-range 2″ speakers. That may not seem like much, but 10 years of research have created a column speaker that uses analog delay beam-forming and amplitude tapering to make sure directivity is even across the CBT 100LA-1’s extended 80Hz-20kHz frequency range. The result is even, balanced sound without frequency lobing inconsistencies as you move around the coverage area. Best of all, you can switch between 40-degree vertical dispersion (for medium-throw coverage in smaller rooms) and 15-degree vertical dispersion (for long-throw coverage in larger rooms).

Perfect for performance and speechAny place you need clear, balanced sound that covers a large area well, the JBL CBT 100LA-1 will deliver. Switchable voicings let the CBT 100LA-1 use a flat frequency response for music playback, as well as a speech mode with a midrange presence boost. It’s ideal for school auditoriums and churches, allowing your message to be heard clearly throughout the room. Anywhere you have a large room that requires lots of coverage without the compromise of dead spots or frequency lobing, the CBT 100LA-1 is ready to perform.

Easy to installJBL’s CBT 100LA-1 column speakers come with a swiveling wall bracket, and also have 10 threaded insert points on the rear of the fiberglass reinforced ABS cabinet. Contractors love how easy it is to install the CBT series, and it’s easy to position them for the maximum coverage in your room. Call us to find out more about how to integrate the CBT 100LA-1 into your sound system!

JBL CBT 100LA-1 Passive Speaker Features:

Passive column speaker for installation with incredibly balanced horizontal and vertical directivity

325W RMS power handling 2 hours continuous operation, 200W RMS power handling 100 hours continuous

80Hz-20kHz frequency range is perfect for both music or speech

Switchable voicing adds a presence boost for speech applications

SonicGuard overload protection prevents distortion

Built-in 70V/100V transformer, and 8 ohm direct capability, for flexible installation

Color: Black

Fill your room with exceptional sound, with the JBL CBT 100LA-1 passive speaker!
Add to cart
Compare
Quick View
JBL CBT50LA-1 Line Array Column Speakers
Installed Sound & Others
₹40,999.00
Amazingly Balanced Sound for Large Rooms
The JBL CBT 50LA-1 passive speaker uses JBL’s breakthrough Constant Beamwidth Technology to produce a column speaker with incredibly balanced projection across a large area. Passive column speakers normally create inconsistencies in sound when you move about the room, but not the CBT 50LA-1! JBL’s patent-pending design uses an array of eight full-range 2″ drivers with 150 watts of power capacity, and the result is consistent, natural sound coverage – both horizontally and vertically. Perfect for large rooms like churches, school auditoriums, and theaters, the CBT 50LA-1 is easy to install as well as easy to optimize for your room. Call us today to find out how you can integrate the JBL CBT 50LA-1 passive speakers into your live sound system!
JBL CBT 50LA-1Passive Speaker at a Glance:

Innovative design for superior sound coverage

Perfect for performance and speech

Easy to install

Innovative design for superior sound coverageThe JBL CBT 50LA-1 handles 150 watts of power to drive an array of eight full-range 2″ speakers. That may not seem like much, but 10 years of research have created a column speaker that uses analog delay beam-forming and amplitude tapering to make sure directivity is even across the CBT 50LA-1’s extended 80Hz-20kHz frequency range. It’s new technology, and the result is even, balanced sound without frequency lobing inconsistencies as you move around the coverage area.

Perfect for performance and speechAny place you need clear, balanced sound that covers a large area well, the JBL CBT 50LA-1 will deliver. Switchable voicings let the CBT 50LA-1 use a flat frequency response for music playback, as well as a speech mode with a midrange presence boost. It’s ideal for school auditoriums and churches, allowing your message to be heard clearly throughout the room. Anywhere you have a large room that requires lots of coverage without the compromise of dead spots or frequency lobing, the CBT 50LA-1 is ready to perform.

Easy to installJBL’s CBT 50LA-1 column speakers come with a swiveling wall bracket, and also have 10 threaded insert points on the rear of the fiberglass reinforced ABS cabinet. Contractors love how easy it is to install the CBT series, and it’s easy to position them for the maximum coverage in your room. Call us to find out more about how to integrate the CBT 50LA-1 into your sound system!

JBL CBT 50LA-1 Passive Speaker Features:

Passive column speaker for installation with incredibly balanced horizontal and vertical directivity

150W RMS power handling 2 hours continuous operation, 100W RMS power handling 100 hours continuous

80Hz-20kHz frequency range is perfect for both music or speech

Switchable voicing adds a presence boost for speech applications

SonicGuard overload protection prevents distortion

Built-in 70V/100V transformer, and 8 ohm direct capability, for flexible installation

Color: Black

Fill your room with exceptional sound, with the JBL CBT 50LA-1 passive speaker!
Tech Specs
- Powered:No
- Speaker Size:8 x 2″
- Power Rating:150W
- Total Power:600W
- Impedance:8 ohms
- Frequency Range:80Hz-20kHz (-10dB)
- Maximum Peak SPL:121dB
- Horizontal Coverage Angle:150 Degrees
- Vertical Coverage Angle:20 Degrees
- Enclosure Material:Fiberglass reinforced ABS cabinet
- Mounting Options:Wall Mount (hardware included), Multiple Fly Points
- Height:20.8″
- Width:3.9″
- Depth:6″
- Weight:9 lbs.
- Manufacturer Part Number:CBT 50LA-1
Add to cart
Compare
Quick View
JBL CBT70J-1 Line Array Column Speakers
Installed Sound & Others
₹97,999.00
Amazingly Balanced Sound for Any Room or Theater
The JBL CBT 70J-1 passive speaker uses JBL’s breakthrough Constant Beamwidth Technology to produce a column speaker with incredibly balanced projection across a large area. Passive column speakers normally create inconsistencies in sound when you move about the room, but not the CBT 70J-1! JBL’s patent-pending design uses an array of four 5″ LF drivers and sixteen 1″ HF drivers, and the result is consistent, natural sound coverage – both horizontally and vertically. You can even tailor the vertical dispersion to optimize the sound to any room! Perfect for large rooms like churches, school auditoriums, and theaters, the CBT 70J-1 is easy to install as well as easy to optimize for your room. Call us today to find out how you can integrate the JBL CBT 70J-1 passive speakers into your live sound system!
Innovative design for superior sound coverage

The JBL CBT 70J-1 handles up to 500 watts of power to drive an array of four 5″ LF drivers and sixteen 1″ HF drivers. 10 years of research have created a column speaker that uses analog delay beam-forming and amplitude tapering to make sure directivity is even across the CBT 70J-1’s extended 60Hz-20kHz frequency range. The result is even, balanced sound without frequency lobing inconsistencies as you move around the coverage area. Best of all, you can switch between 45-degree vertical dispersion (for medium-throw coverage in smaller rooms) and 25-degree vertical dispersion (for long-throw coverage in larger rooms).

Perfect for performance and speech

Any place you need clear, balanced sound that covers a large area well, the JBL CBT 70J-1 will deliver. Switchable voicings let the CBT 70J-1 use a flat frequency response for music playback, as well as a speech mode with a midrange presence boost. It’s ideal for school auditoriums and churches, allowing your message to be heard clearly throughout the room. Anywhere you have a large room that requires lots of coverage without the compromise of dead spots or frequency lobing, the CBT 70J-1 is ready to perform.

Easy to install

JBL’s CBT 70J-1 column speakers come with a swiveling wall bracket, and also have 10 threaded insert points on the rear of the fiberglass reinforced ABS cabinet. Contractors love how easy it is to install the CBT series, and it’s easy to position them for the maximum coverage in your room. Call us to find out more about how to integrate the CBT 70J-1 into your sound system!

JBL CBT 70J-1 Passive Speaker Features:

Passive column speaker for installation with incredibly balanced horizontal and vertical directivity

500W RMS power handling 2 hours continuous operation, 350W RMS power handling 100 hours continuous

60Hz-20kHz frequency range is perfect for both music or speech

Switchable voicing adds a presence boost for speech applications

SonicGuard overload protection prevents distortion
Add to cart
Compare
Quick View
Rode NT2A Recording Microphone
Recording Microphones
₹40,499.00
A Legend Is Reborn – with Cool Extras!

The Rode NT2-A is a professional large capsule (1″) condenser studio microphone with variable pick-up pattern, variable highpass filter and variable pad. These features provide greater creative control and versatility. Three 3-position switches located on the mic body provide the freedom to step from Figure 8, Cardioid or Omni polar pick-up patterns; from a flat response to either 40Hz or 80Hz highpass filter, and a Pad adjustment of 0dB, -5dB or -10dB attenuation. The heart of the NT2-A is the Australian-designed and -manufactured TYPE HF1 dual diaphragm capsule. The frequency and transient response of this new transducer has been voiced to complement today’s modern recording techniques yet still evoke the silky smooth character of legendary microphones of the 50’s and 60’s. And just to make the NT2 A Studio Solution a home run, RODE is including a shockmount, cable, dust cover, and tutorial DVD! What an incredible deal!
Rode NT2-A Features:

The Australian designed and manufactured HF1 1″ edge terminated, gold sputtered, dual 5 um diaphragm capsule.

3-position variable polar pattern: Omni, Cardioid & Figure 8; all controlled on the mic.

3-position variable highpass filter: Flat, 80Hz or 40Hz.

3-position variable pad: 0dB, -5dB or -10dB.

Ultra low noise, transformerless SMT circuitry.

Wide dynamic range.

High strength heat-treated steel mesh head.

Durable satin nickel finish.

Internal capsule shock mounting.

Supplied complete with soft pouch and clip.

Designed and manufactured in Sydney, Australia.

SM6 Shockmount

XLR Cable

Microphone Dust Cover

Exclusive NT2-A Recording Techniques DVD w/John Merchant

Requires +48V phantom power

Tech Specs

Microphone Type:Condenser

Polar Pattern:Cardioid, Omni, Figure-8

Diaphragm Size:1″ (25.4mm)

Frequency Response:20Hz-20kHz

Max SPL:147dB

Output Impedance:200 ohms

Self Noise:7dB (A weighted)

Low Cut Filter:40Hz, 80Hz

Pads:-5dB, -10dB

Color:Silver

Connector:XLR

Weight:1.9 lbs.

Included Accessories:Shock Mount, Pop Filter, 20′ Mic Cable, Dust Cover

Manufacturer Part Number:NT2-A
Add to cart
Compare
Quick View
Rode NTG2 Shotgun Microphone
Wired Microphones
₹26,999.00
Put RØDE Sound Quality into Your Video or Film Project!
You know you can count on RØDE for an outstanding mic at a great price. And that extends to film and video work! When you need a quality shotgun mic that’s built to perform, you want RØDE’s NTG-2. It’s lightweight, so you’ll have no problems using it as a camera-mounted mic or on a boom pole. The NTG-2 also sounds absolutely great, thanks to its wide frequency range and tight supercardioid pickup pattern. Want tough? It’ll take what you can dish out and keep sounding fantastic, in any environment. Want flexibility? This mic can be phantom powered or you can run it off of a battery. The NTG-2 comes complete with a mount and a handy windshield.

RØDE NTG-2 Supercardioid Shotgun Microphone Features at a Glance:
- Supercardioid
- Frequency Range: 20Hz-20kHz selectable HPF @ 80Hz/12dB octave
- Maximum SPL: 131dB
- Broadcast sound quality
- Rugged metal contruction
- Condenser microphone transducer
- Weighing 161 grams approx. (5.17 oz.)
- Low noise circuitry
- Low handling noise
- Supplied with stand mount and zip pouch
- Designed and manufactured in Australia
- Full 2-year guarantee
Put RØDE quality into your video or film project, with the NTG-2 shotgun mic!
Tech Specs
- Microphone Type:Shotgun Condenser
- Polar Pattern:Supercardioid
- Frequency Response:20Hz-20kHz
- Max SPL:131 dB
- Output Impedance:250 ohms (350 ohms w/Battery)
- Signal to Noise Ratio:76dB (A weighted)
- Self Noise:18dB (A weighted)
- Low Cut Filter:80Hz
- Power:Phantom Power, Battery (1 x 1.5V AA)
- Connector:XLR
- Length:10.94″
- Weight:0.36 lbs.
- Included Accessories:Stand Mount, Windscreen, Carry Bag
- Manufacturer Part Number:NTG2
Add to cart
Compare
Quick View
Sennheiser e614 Condenser Instrument Microphone
Wired Microphones
₹14,999.00
Sennheiser Super Microphone!

The e614’s super-cardioid pattern, in combination with a neutral response and moderate sensitivity, insures optimum isolation from other instruments on stage. Unobtrusive for precise placement and powered by external phantom power, the e614 tolerates extremely high SPLs, precisely capturing cymbals and hi-hats like no other mic in its price range.

Extremely wide frequency range. Focused pick-up. Outstanding transient response. As a condenser microphone, the e 614 convinces in demanding scenarios with a natural, full sound. Its wide frequency range captures nearly every instrument; its extraordinary dynamics conjure fine nuances from the air, giving them space and depth.
Thanks to the precise directivity, the e 614 safely reduces the bleed from other instruments on stage or in the studio. With its high maximum sound pressure level, it is especially designed for percussion and as an overhead mic, but also effortlessly supports stringed and woodwind instruments.

Key Features
- Condenser microphone
- Excellent directivity over the entire frequency range (40-20,000 Hz)
- Natural sound for flexible applications
- Designed for high sound pressure levels
- Rugged and ready for the road
Tech Specs
- Microphone Type:Condenser
- Polar Pattern:Supercardioid
- Frequency Response:40Hz-20kHz
- Max SPL:139dB
- Output Impedance:50 ohms
- Self Noise:24dB (A weighted)
- Connector:XLR
- Weight:0.2 lbs.
- Included Accessories:Mic Clip, Carrying Pouch
- Manufacturer Part Number:009895
Add to cart
Compare
Quick View
Sennheiser e914 Condenser Instrument Microphone
Wired Microphones
₹25,499.00
Small-diaphragm Condenser from Sennheiser!

The e914 is a high-grade condenser microphone for very demanding applications. Its outstanding sound properties qualify the e914 for highly sophisticated applications like acoustic guitars, cymbals, percussion, overhead, orchestras, and grand pianos.

Sennheiser e914 Features:
- Exceptionally lively, clear sound
- Three-position sensitivity switch
- Three-position bass roll-off/cut-off switch
- Very high sound pressure handling capability
- Requires +48V phantom power
Tech Specs
- Microphone Type:Condenser
- Polar Pattern:Cardioid
- Diaphragm Size:0.55″ (14mm)
- Frequency Response:20Hz-20kHz
- Max SPL:137dB (157dB w/Pads)
- Output Impedance:100 ohms
- Self Noise:19dB (A weighted)
- Pads:-10dB, -20dB
- Connector:XLR
- Weight:0.44 lbs.
- Included Accessories:Mic Clip, Windscreen, Microphone Pouch
- Manufacturer Part Number:500206
Add to cart
Compare
Quick View
Shure BLX1288/CVL Dual Hand-Lapel Wireless Microphone
Wireless Microphones
₹67,999.00
Wireless Freedom for Two
The Shure BLX1288/CVL wireless system equips two people for wireless freedom, while offering rock-solid build quality and easy setup and operation. And thanks to Shure’s cutting-edge QuickScan technology, frequency-selection hassles are a thing of the past, helping you get your show up and running that much faster. This system includes two microphones — the CVL lavalier microphone and the BLX2/PG58 handheld mic with built-in transmitter — as well as a BLX1 bodypack transmitter for the lav mic, and the BLX88 dual-channel receiver. When you need to perform with the freedom that only wireless allows, Shure’s BLX wireless systems are a smart, affordable choice. Enjoy legendary Shure sound and performance — take the stage confidently with the Shure BLX1288/CVL wireless system.
Convenient and easy to use

Providing up to 14 hours of use with two AA batteries, Shure’s BLX Series transmitters let you perform with confidence that the show will go on. And when it comes to frequency selection, the live sound gurus here swear by the fast, convenient frequency matching afforded by the Shure BLX’s group and channel selection buttons.

Ready to rock, right out of the box

If you’re ready to go wireless, Shure’s BLX wireless systems are a smart, affordable choice. Take the stage confidently, backed up by Shure’s legendary microphones, decades of wireless design experience, and tour-tested build quality. Available in a broad selection of bodypack and handheld configurations, BLX vocal, guitar, headset, and presenter systems are ready to rock, right out of the box.

Versatile and expandable

Shure’s BLX wireless platform supports up to 12 simultaneous wireless channels (dependent on the local wireless traffic conditions), giving you room to grow as you need to add channels in the future.

Shure BLX1288/CVL Dual-channel Wireless Microphone System Features:

User-friendly, high-performance wireless system

BLX wireless supports up to 12 simultaneous channels

BLX88 dual-channel receiver with easy one-touch setup

BLX2/PG58 handheld microphone with built-in transmitter for vocalists and public speaking

CVL lavalier microphone is ideal for interviews and theater performances

Tech Specs

Configuration:Complete System

System: Simultaneous Channels:Up to 12

System: Analog/Digital:Analog

System: Frequency Range:542-572 MHz

System: Operating Range:300 ft. Line-of-sight

System: Frequency Response:50Hz-15kHz

System: Microphone Included:Yes

System: Channel Selection:Auto/Manual

Microphone: Type:Handheld Dynamic, Lavalier Condenser

Microphone: Polar Pattern:Handheld Cardioid, Lavalier Cardioid

Microphone: Max SPL:139dB SPL

Microphone: Size:8.8″ x 2″ (handheld)

Microphone: Connector:TA4F

Microphone: Color:Black

Microphone: Frequency Response:50Hz-20kHz

Microphone: Cable Length:4.27 ft.

Microphone: Self Noise:22dB

Transmitter: Form Factor:Handheld, Bodypack

Transmitter: Dynamic Range:117dB (A weighted)

Transmitter: Battery Type:2 x AA

Transmitter: Battery Life:Up to 14 hours

Transmitter: Connector:TA4M

Transmitter: Dimensions:4.3″ x 2.5″ x 02.8″

Transmitter: Weight:0.16 lbs.

Receiver: Antenna Type:Fixed

Receiver: Signal/Noise Ratio:117dB (A-weighted)

Receiver: Type:Table Top

Receiver: Front Panel Display:Yes

Receiver: Displays:LED

Receiver: Outputs:2 x XLR, 2 x 1/4″

Receiver: Dimensions:1.5″ x 12.13″ x 3.98″

Receiver: Weight:0.94 lbs.
Add to cart
Compare
Quick View
Shure BLX1288/P31 Dual Hand-Headworn Wireless Microphone
Wireless Microphones
₹64,999.00
Dual-channel Wireless System for Energetic Performers
The Shure BLX1288/P31 Dual-channel Wireless Combo System gives you dependable operation and rock-solid build quality — plus effortless setup and operation. It’s equipped with Shure’s cutting-edge QuickScan technology, which makes frequency selection a breeze. This system includes the BLX88 dual-channel receiver, BLX1 bodypack transmitter, PGA31 headset microphone, and a PG58 handheld transmitter. If you are ready to present without wires and annoying connectivity issues, Shure’s BLX systems are an excellent choice. any employees trust Shure BLX systems to provide their sound onstage, and with this system, you too can take the stage knowing that Shure’s dedication to quality construction and world-renowned sound are there to support you.
A Reliable Headset That’s Comfortable to Wear

Especially if you’re active on stage, you need a comfortable and reliable headset microphone like the Shure PGA31 condenser mic. The flexible gooseneck on this headset makes it easy to put the mic capsule in the best possible position for your vocals. And since Shure designed the PGA31 to be comfortable even after hours of use, you’ll be able to focus completely on your performance or presentation.

Convenient and easy to use

Providing up to 14 hours of use with two AA batteries, Shure’s BLX Series transmitters let you perform with confidence. And when it comes to frequency selection, the live sound gurus here swear by the fast, convenient frequency matching afforded by the Shure BLX’s group and channel selection buttons.

Ready to rock, right out of the box

If you’re ready to go wireless, Shure’s BLX wireless systems are a smart, affordable choice. Take the stage confidently, backed up by Shure’s legendary microphones, decades of wireless design experience, and tour-tested build quality. Available in a broad selection of bodypack and handheld configurations, BLX vocal, guitar, headset, and presenter systems are ready to rock, right out of the box.

Versatile and expandable

A choice of single-channel, single-channel half-rack, and dual-channel receivers, as well as vocal, guitar, headset, and lavalier options, makes Shure’s BLX wireless systems quite versatile. And the ability to run up to 12 compatible systems per band protects your investment, letting you start out modestly and expand as necessary.

Shure BLX1288/P31 Dual-channel Wireless Combo System Features:

User-friendly, high-performance wireless system

PGA31 headset microphone

BLX1 bodypack transmitter is sleek and inconspicuous onstage

BLX4 receiver easily fits on tables where real estate is at a premium

PG58 transmitter provides clean audio at high SPLs
Add to cart
Compare
Quick View
Shure BLX14/CVL Lapel Wireless Microphone
Wireless Microphones
₹32,999.00
Wireless Freedom with Easy Setup

The Shure BLX14/CVL wireless system delivers world-class design and rock-solid build quality, along with easy setup and operation. Thanks to Shure’s cutting-edge QuickScan technology, frequency-selection hassles are a thing of the past. The system includes the BLX4 receiver with easy one-touch setup, the BLX1 bodypack transmitter, and the CVL lavalier microphone with cardioid polar pattern — an outstanding mic for presentations, interviews, and public speaking. When you need to perform with the freedom that only wireless allows, Shure’s BLX wireless systems are a smart, affordable choice. Enjoy legendary Shure sound and performance — take the stage confidently with the Shure BLX14/CVL wireless system.
Convenient and easy to use

Providing up to 14 hours of use with two AA batteries, Shure’s BLX Series transmitters let you perform with confidence that the show will go on. And when it comes to frequency selection, the live sound gurus here swear by the fast, convenient frequency matching afforded by the Shure BLX’s group and channel selection buttons.

Ready to rock, right out of the box

If you’re ready to go wireless, Shure’s BLX wireless systems are a smart, affordable choice. Take the stage confidently, backed up by Shure’s legendary microphones, decades of wireless design experience, and tour-tested build quality. Available in a broad selection of bodypack and handheld configurations, BLX vocal, guitar, headset, and presenter systems are ready to rock, right out of the box.

Versatile and expandable

Shure’s BLX wireless platform supports up to 12 simultaneous systems (dependent on the local wireless traffic conditions), giving you room to grow as you need to add channels in the future.

Shure BLX14/CVL Wireless Instrument Microphone System Features:

User-friendly, high-performance wireless system

BLX wireless supports up to 12 simultaneous systems

BLX4 single-channel receiver with easy one-touch setup

CVL lavalier condenser microphone with cardioid polar pattern captures your voice with exceptional clarity

Also includes mic clip, power supply, and 2 AA test batteries

Tech Specs

System: Simultaneous Channels:Up to 12

System: Analog/Digital:Analog

System: Frequency Range:572-596MHz

System: Operating Range:300 ft. Line-of-sight

System: Frequency Response:50Hz-15kHz

System: Microphone Included:Yes

System: Channel Selection:Auto

Microphone: Type:Condenser

Microphone: Polar Pattern:Cardioid

Microphone: Max SPL:139dB SPL

Microphone: Connector:TA4F

Microphone: Color:Black

Microphone: Frequency Response:50Hz-15kHz

Microphone: Cable Length:4.27 ft.

Microphone: Self Noise:22dB

Transmitter: Form Factor:Bodypack

Transmitter: Dynamic Range:117dB (A weighted)

Transmitter: Battery Type:2 x AA

Transmitter: Battery Life:Up to 14 hours

Transmitter: Connector:TA4M

Transmitter: Dimensions:4.3″ x 2.5″ x 0.8″

Transmitter: Weight:0.16 lbs.

Receiver: Antenna Type:Fixed

Receiver: Signal/Noise Ratio:72dB (A-weighted)

Receiver: Type:Table Top

Receiver: Front Panel Display:Yes

Receiver: Displays:LED

Receiver: Outputs:1 x XLR, 1 x 1/4″

Receiver: Dimensions:1.5″ x 7.4″ x 4″

Receiver: Weight:0.53 lbs.

Manufacturer Part Number:BLX14/CVL
Add to cart
Compare
Quick View
Shure BLX188/CVL Dual Lapel Wireless Microphone
Wireless Microphones
₹66,999.00
A Wireless Lavalier System You Can Count On
The Shure BLX188/CVL Lavalier Wireless System gives you dependable design and rock-solid build quality, along with easy setup and operation. Thanks to Shure’s cutting-edge QuickScan technology, frequency-selection hassles are a thing of the past. The system includes a BLX88 dual-channel receiver, two BLX1 bodypack transmitters, and a pair of CVL lavalier microphones with windscreens and tie clips. If you’re ready to present untethered, Shure’s BLX wireless systems are a smart, affordable choice. Take the stage confidently with the Shure BLX188/CVL Lavalier Wireless System.
Low-profile lavalier microphones

Your wireless system ships with a pair of Shure’s CVL lavalier microphones. These miniature mics have a unidirectional polar pattern and a specially-tuned frequency response that’s ideal for speaking applications. Thanks to their compact, low-profile design, CVL lav mics are very inconspicuous onstage and in front of the camera. Included lav clips and windscreens ensure that you always get the best sound quality possible.

A smart 2-channel wireless solution

The Shure BLX88 dual-channel wireless receiver offers world-class design and tour-tough build quality, along with easy setup and operation. Thanks to Shure’s cutting-edge 1-touch QuickScan technology that locates the best open frequency, the BLX88 makes frequency-selection hassles a thing of the past. The BLX88 sports a 2-color audio status indicator LED as well as XLR and 1/4″ output connectors.

Versatile and expandable

A choice of single-channel, single-channel half-rack, and dual-channel receivers, as well as vocal, guitar, headset, and lavalier options make Shure’s BLX wireless systems quite versatile. And the ability to run up to 12 compatible systems per band protects your investment, letting you start out modestly and expand as necessary.

Shure BLX188/CVL Dual-channel Handheld Wireless System Features:

Dual wireless system for speaking applications

Includes 2 BLX1 bodypack transmitters, 2 CVL lavalier microphones, BLX88 dual-channel wireless receiver, power supply, lav clips, windscreens and user guide

1-touch QuickScan frequency selection makes it easy to find the best frequency

Expandable to 12 compatible systems per frequency band

Up to 300′ transmission radius (line of sight)

Tech Specs

System: Simultaneous Channels:Up to 12

System: Analog/Digital:Analog

System: Frequency Range:542-572MHz

System: Operating Range:300 ft. Line-of-sight

System: Frequency Response:50Hz-15kHz

System: Microphone Included:Yes

System: Channel Selection:Auto/Manual

Microphone: Type:Lavalier Condenser

Microphone: Polar Pattern:Cardioid

Microphone: Max SPL:139dB

Microphone: Connector:TA4F

Microphone: Color:Black

Microphone: Frequency Response:50Hz-20kHz

Microphone: Cable Length:4.27 ft.

Microphone: Self Noise:22dB

Transmitter: Form Factor:Bodypack

Transmitter: Dynamic Range:117dB (A weighted)

Transmitter: Battery Type:2 x AA

Transmitter: Battery Life:Up to 14 hours

Transmitter: Connector:TA4M

Transmitter: Dimensions:4.3″ x 2.5″ x 0.8″

Transmitter: Weight:0.16 lbs.

Receiver: Antenna Type:Detachable

Receiver: Type:Rackmount, Table Top

Receiver: Rackmountable:Yes (kit sold separately)

Receiver: Rack Spaces:Half-rack

Receiver: Front Panel Display:Yes

Receiver: Displays:LED

Receiver: Outputs:2 x XLR, 2 x 1/4″

Receiver: Dimensions:1.6″ x 15.3″ x 4.6″

Receiver: Weight:0.94 lbs.
Add to cart
Compare
Quick View
Shure BLX24/B58 Hand Wireless Microphone
Wireless Microphones
₹39,999.00
Perform Untethered, with Confidence
The Shure BLX24/B58 Handheld Wireless System gives you world-class design and rock-solid build quality, along with easy setup and operation. Thanks to Shure’s cutting-edge QuickScan technology, frequency selection hassles are a thing of the past. The system includes the BLX4 receiver and the BLX2/B58 handheld transmitter with integrated Beta 58A supercardioid dynamic microphone capsule. If you’re ready to perform untethered, Shure’s BLX wireless systems are a smart, affordable choice. Enjoy legendary Shure sound and performance. Take the stage confidently with the Shure BLX24/B58 Handheld Wireless System.

Shure BLX24/B58 Handheld Wireless System at a Glance:
- Convenient and easy to use
- Ready to rock, right out of the box
- Versatile and expandable
Convenient and easy to use

Providing up to 14 hours of use with two AA batteries, Shure’s BLX Series transmitters let you perform with confidence. And when it comes to frequency selection, live sound engineers appreciate that Shure BLX makes it easy with Group and Channel selection buttons that give you fast, convenient frequency matching.

Ready to rock, right out of the box

If you’re ready to go wireless, Shure’s BLX wireless systems are a smart, affordable choice. Take the stage confidently, backed up by Shure’s legendary microphones, decades of wireless design experience, and tour-tested build quality. Available in a broad selection of bodypack and handheld configurations, BLX vocal, guitar, headset, and presenter systems are ready to rock, right out of the box.

Versatile and expandable

A choice of single-channel, single-channel half-rack, and dual-channel receivers, as well as vocal, guitar, headset, and lavalier options, makes Shure’s BLX wireless systems quite versatile. And the ability to run up to 12 compatible systems per band protects your investment, letting you start out modestly and expand as necessary.

Shure BLX24/B58 Handheld Wireless System Features:
- Singers, enjoy your freedom!
- User-friendly, high-performance wireless system
- BLX2/B58 handheld transmitter with integrated Beta 58A supercardioid dynamic microphone capsule
- BLX4 receiver
Take the stage confidently with Shure’s BLX24/B58 Handheld Wireless System!
Tech Specs
- Simultaneous Systems Per Band:12
- System: Analog/Digital:Analog
- System: Frequency Range:512-542MHz
- System: Operating Range:300 ft. Line-of-sight
- System: Frequency Response:50Hz-15kHz
- System: Microphone Included:Yes
- System: Channel Selection:Auto
- Microphone: Type:Dynamic
- Microphone: Polar Pattern:Supercardioid
- Microphone: Frequency Response:50Hz-15kHz
- Transmitter: Form Factor:Handheld
- Transmitter: Battery Type:2 x AA
- Transmitter: Battery Life:Up to 14 hours
- Transmitter: Dimensions:8.87″ x 2.12″
- Transmitter: Weight:0.48 lbs.
- Receiver: Antenna Type:Fixed
- Receiver: Type:Table Top
- Receiver: Displays:LED
- Receiver: Outputs:1 x XLR, 1 x 1/4″
- Receiver: Dimensions:1.57″ x 7.4″ x 4.05″
- Receiver: Weight:8.5 oz.
Add to cart